DTAPU60 SERIES 60 Watts AC/DC Desktop Power Supplies Rev C FEATURES • Class I • Single Outputs Ranging from 12VDC to 48 • RoHS2 Compliant VDC • 60 Watts Output Power Size: 4.65 x 1.85 x 1.19 inches 118.0 x 47.0 x 30.3 mm • UL 60950-1:2nd Edition, IEC 60950- • Up to 88% High Efficiency 1:2005/A2:2013, EN60950-1:2006/A2:2013 • Energy Star 2.0, Efficiency Level VI Safety Approvals • 90-264VAC Input Voltage Range • -40°C to +70°C Operating Temperature Range • Free Air Convection • IEC-320-C14 AC Inlet Connector • Optional Output Connectors Available SAFETY Weight: 2oz (340g) Applications: • POS Systems • AV Equipment • Industrial PCs • Chargers • LED Lighting Applications DESCRIPTION The DTAPU60 series of AC/DC desktop power supplies provides 60 Watts of continuous output power in a 4.65 x 1.85 x 1.19 inch package. This series consists of single output models ranging from 12VDC to 48VDC with a 90~264VAC input voltage range and an IEC-320-C14 AC inlet connector. Some features include high efficiency up to 88%, -40°C to +70°C operating temperature range, and short circuit and over current protection. All units are UL 94V-1, RoHS2, and CEC & Energy Star Level VI compliant. This series also meets FCC Part-15 class B and CISPR-22 class B emission limits. All models meet new CE requirements and have UL 609501:2nd Edition, IEC 60950-1:2005/A2:2013, EN60950-1:2006/A2:2013 safety approvals. All units have been 100% burn-in tested. MODEL SELECTION TABLE DTAPU60A-105 Output Voltage Min Max 12 VDC 13 VDC Output Current Min Max 4.61 A 5.00 A DTAPU60A-106 13 VDC 16 VDC 3.75 A DTAPU60A-107 16 VDC 21 VDC 21 VDC 27 VDC Model Number (1) DTAPU60A-108 Input Voltage Range 80 ~ 275VAC Output Power 60W Typical Efficiency 87.7% Ripple & Noise 100mVp-p Total Regulation 5% 4.61 A 60W 87.7% 100mVp-p 5% 2.85 A 3.75 A 60W 87.7% 100mVp-p 5% 2.22 A 2.85 A 60W 88% 100mVp-p 3% DTAPU60A-109 27 VDC 33 VDC 1.81 A 2.22 A 60W 88% 100mVp-p 3% DTAPU60A-110 33 VDC 40 VDC 1.50 A 1.81 A 60W 88% 100mVp-p 3% DTAPU60A-111 40 VDC 48 VDC 1.25 A 1.50 A 60W 88% 100mVp-p 3% 08/14/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 1 of 4 Rev C DTAPU60 SERIES 60 Watts AC/DC Desktop Power Supplies TECHNICAL SPECIFICATIONS: DTAPU60 SERIES All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Typ Max Unit INPUT SPECIFICATIONS Safety Approvals Input Voltage Range Operating Input Voltage Range Input Voltage Input Frequency Input Current High Line Inrush Current No Load Power Consumption OUTPUT SPECIFICATIONS Output Voltage Line Regulation Load Regulation Output Power Output Current Ripple & Noise (20MHz BW) Hold-up Time Start-up Time Transient Response Time Temperature Coefficient No Load Consumption PROTECTION Over Load Protection Short Circuit Protection GENERAL SPECIFICATIONS Efficiency Full Load, Vin=100~120VAC Vin=230VAC, 10~90% Load Change at Condition 90VAC, full load 100VAC, full load 100~240VAC, full load 110VAC, Full load Full Load, Vin=100~240VAC 08/14/2014 Hz A A W See Table 1 5 60 See Table 100 0.5 3 % % W mVp-p ms s ms %/°C W 3 4 +0.04 -0.04 0.21 Recovers automatically after fault condition is removed AC Inlet Output Connector SAFETY, EMC, & COMPLIANCE CEC & Energy Star VAC 10 Dimensions (L x W x H) Compliance 240 264 63 1.45 1.45 105 0.5 Low Line; 100VAC, full load High Line; 240VAC, full load 230VAC, full load, 25°C, cold start 230VAC, no load 230 VAC, full load Primary to Secondary Dielectric Withstanding Voltage Primary to PE Isolation Resistance Test Voltage = 500VDC Leakage Current 240VAC/60Hz ENVIRONMENTAL SPECIFICATIONS Operating Temperature Derating linearly from 100% Load at 40°C to 50% load at 70°C Storage Temperature 10~95%RH Operating Humidity Non-Condensing Storage Humidity Cooling Flammability Rating Air Discharge, IEC61000-4-2 Electro Static Discharge Contact Discharge, IEC61000-4-2 Operating Altitude Vibration 10~500Hz, 10min./1cycle, 60min. each along X, Y, Z axes Line-Neutral Surge Voltage Line-PE & Neutral-PE MTBF MIL-HDBK-217F, 25°C PHYSICAL SPECIFICATIONS Weight Safety Approvals 100 90 47 110 150 Automatic Recovery % 87 % 4242 2652 VDC MΩ mA 50 0.75 -40 -40 0 0 +70 +85 95 95 Free air convection UL94V-1 8 6 2000 5 1 2 100,000 °C °C %RH %RH kV m G kV hours 12oz (340g) 4.65 x 1.85 x 1.19 in (118.0 x 47.0 x 30.3 mm) IEC-320-C14 Several options available UL60950-1: 2nd Edition IEC 60950-1:2005/A2:2013 EN60950-1:2006/A2:2013 RoHS2 CEC and Energy Star 2.0, Efficiency Level VI Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 4 Rev C DTAPU60 SERIES 60 Watts AC/DC Desktop Power Supplies NOTES 1. The output voltage is specified as a range (ex: 40~48VDC); the customer must specify what they would like the output voltage set at. 2. DTAPU60A-105 need to use AWG#16/4FT output cable in order to meet all listed specifications. Models DTAPU60A-106~111 need to use AWG#18/4FT output cable in order to meet all listed specifications. The specifications will change if a different output cable is used. 3. Optional output connectors are available for this series. Please call factory for ordering details. 4. At factory, each output is checked to be within voltage accuracy in 60% rated load condition. 5. Line regulation is defined by changing ±10% of input voltage from nominal line at rated load. 6. Load regulation is defined by changing ±40% of measured output load from 60% rated load 7. Ripple & Noise is measured by using 20MHz bandwidth limited oscilloscope and terminated each output with a 0.47uF capacitor at rated load and nominal line. 8. Hold up time is measured from the end of the last charging pulse to the time which the main output drops down to low limit of main output at rated load and nominal line. Due to advances in technology, specifications are subject to change without notice. MECHANICAL DRAWING 08/14/2014 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 4 Rev C DTAPU60 SERIES 60 Watts AC/DC Desktop Power Supplies DERATING Input Voltage Derating Curve Temperature Derating Curve COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 08/14/2014 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 4