Beverly Microwave Division www.cpii.com/bmd Beverly Microwave Division 150 Sohier Road • Beverly, MA 01915 Phone: +1(978) 922-6000 • Email: [email protected] www.cpii.com/bmd C-Band Solid State Power Amplifiers Critical for today’s weather forecasting VSC3644 C-Band GaN High Power SSPA • Frequency range: 5.2 - 5.9 GHz • 1.1 kW pulsed module • BIT and controls via EIA-422 remote connection • Easily combined to create high power C-band radar transmitters VSC3645 C-Band GaN High Power SSPA • Frequency range: 5.2 - 5.9 GHz • 4.2 kW pulsed • BIT and controls via EIA-422 remote connection • Graceful power degradation Solid State GaN Power Amplifiers X - Band Solid State Power Amplifiers Ruggedized for use in airborne radars L-Band S-Band C-Band X-Band VSX3630 X-Band GaN High Power SSPA • Frequency range: 7.8 to 9.8 GHz • BIT and controls via EIA-422 remote • 900 W pulsed modules at 20% duty • 1.5 kW peak power and up to 12 kW when power combined VSX3614 X-Band GaN High Power SSPA • Frequency range: 8.8 to 9.6 GHz • High efficiency GaN transistors • BIT and controls via EIA-422 remote connection • 900 W peak pulsed modules at 10% Duty that can be power combined CPI: At the Heart of Leading Technologies Communications & Power Industries (CPI) develops, manufactures and globally distributes components and subsystems used in the generation, amplification, transmission and reception of microwave signals for a wide variety of systems including radar, electronic warfare and communications (satellite and point-to-point) systems for military and commercial applications, specialty products for medical diagnostic imaging and the treatment of cancer, as well as microwave and RF energy generating products for various industrial and scientific pursuits. SSPA PG. 4 The values listed above represent specified limits for the product and are subject to change. The data should be used for basic information only. Formal, controlled specifications may be obtained from CPI for use in equipment design. For information on this and other CPI products visit our web page at www.cpii.com/bmd, or contact: CPI Beverly Microwave Division, Telephone: +1 (978) 922-6000 • FAX: +1 (978) 922-8914 • Email: [email protected] 5/16 • Solid State Power Amplifiers • Integrated Microwave Assemblies • Solid State Power Amplifiers • Integrated Microwave Assemblies • Receiver Protectors • Receiver Protectors • Control Components • Transmitters • Amplifiers • Control Components • Transmitters • Amplifiers • Modulators • Magnetrons • Modulators • Magnetrons • Crossed Field Amplifiers • Crossed Field Amplifiers • Ring Loop Traveling • Ring Loop Traveling Wave Tubes • Power Couplers Wave Tubes • Power Couplers Beverly Microwave Division www.cpii.com/bmd GaN Amplifiers provide high gain, high efficiency and excellent stability, with excellent AM/PM and phase-noise performance L-Band Solid State Power Amplifiers S-Band Solid State GaN Power Amplifiers • Frequency range: 2.7 to 2.9 GHz • BIT and controls via EIA-422 remote connection • 1.3 kW pulsed modules • Built-in VSWR protection • Compliant to NTIA regulatory requirements For use in Long Range Search Radars VSL3606 L-Band GaN High Power SSPA • Frequency range:1.2 – 1.4 GHz • 700 Watt modules with ALC (Automatic leveling control) • Excellent pulse fidelity for radar applications For use in Air Traffic Control radar systems VSS3617 S-Band GaN High Power Transmitters 1.3 kW to 20 kW Amplifiers are available by power combining modules if high power is needed with a single output. VSS3634 S-Band GaN High Power SSPA • Transmitter cabinet with 12 kW • 1.3 kW pulsed modules that minimum peak output power can be power combined for higher peak power output • Soft fail by virtue of power combining • Internal processor with BITE • Full redundancy monitoring • >160 dB of power attenuation available • Self protecting • Designed for ATC shelter applications BIT and controls via EIA-422 for remote control and diagnostics. For use in Particle Accelerators VSL3616 L-Band GaN - CW, High Power SSPA • Frequency range: 1.3 GHz • 700 W CW • Liquid cooled • 700 W units can be power-combined using external power combiners if desired for higher power • Optimized for scientific applications Excellent AM/PM and phase noise performance for use in particle accelerators. SSPA PG. 2 • Provide high gain, excellent pulse fidelity • Excellent pulse fidelity with low AM/PM, phase-noise and spectral regrowth performance • Easy to maintain For use in Precision Approach Radar Transmitters VSS3635 S-Band GaN High Power Transmitters VSS3607 S-Band GaN High Power SSPA • Transmitter with 10 kW minimum peak power output. • 1.3 kW pulsed modules that can be power combined for higher peak power output • Soft fail by virtue of power combining • Excellent noise performance due to operation off of stored energy during the RF pulse • Internal BIT circuitry via EIA-422 remote connection • Self protecting • Designed for small mobile applications • Solid State Power Amplifiers • Integrated Microwave Assemblies • Receiver Protectors • Control Components • Transmitters • Amplifiers • Modulators • Magnetrons • Crossed Field Amplifiers • Ring Loop Traveling Wave Tubes • Power Couplers SSPA PG. 3