PSMDC060 SERIES 60~70W LED Driver AC/DC Single Output Series Rev A Size: 6.69 in x 2.48 in x 1.57in (170mm x 63mm x 40mm) OPTIONS • Output Current • Optional Timer Dimming Function APPLICATIONS FEATURES • Built-In 10KV lightning surge protection (EN6100-4-5) • 90~305VAC Full Range Input • Active PFC • Output Range up to 200VDC • Aluminum Case (IP65/IP67) Waterproof • Dual Mode Over Temperature Thermal Design • • • • • • • • Output Voltage Automatic Tracing & Fixing Function Built-In 3 in 1 Output Current Dimming Function (Type B) Optional Timer Dimming Function Class 2 Power Unit/ Passes LPS Long Lasting Lifetime UL/CB/CCC/CE/PSE Approvals Outdoor LED Luminary Rugged Driver Solutions 2 Year Warranty DESCRIPTION • Outdoor Lighting The PSMDC060 series of AC/DC LED driver power supplies offers up to 70 watts of output power in a 6.69” x 2.76” x 1.57” case. This series consists of various output voltages with a 90~305VAC input voltage range. These series are protected against short circuit, over voltage, and over temperature conditions. The PSMDC060 series has an IP65/IP67 aluminum case, waterproof design and is useful in outdoor lighting scenarios. All models have UL/CB/CCC/CE/PSE safety approvals and a 2 year warranty. MODEL SELECTION TABLE Model Number(1) PSMDC-060-0350 PSMDC-060-0700 PSMDC-060-1050 PSMDC-060-1400 PSMDC-060-1750 PSMDC-060-2280 5/2/2016 Input Voltage Range(2) Rated Current Ripple & Noise(3) 90~305VAC 350mA 700mA 1050mA 1400mA 1750mA 2280mA 0.5Vp-p 0.2Vp-p 0.2Vp-p 0.2Vp-p 0.2Vp-p 0.2Vp-p Current Adjustment Range(4) 100~200V 50~100V 35~70V 25~49V 18~35V 14~27V Output Power Output Voltage 70W 70W 70W 68W 60W 60W 100~200V 50~100V 35~70V 25~49V 18~35V 14~27V Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Output Voltage Max(5) 213V 104V 74V 52V 42V 32V Efficiency(6) 91% 91% 91% 90% 90% 89.5% Page 1 of 6 PSMDC060 SERIES 60~70W LED Driver AC/DC Single Output Series Rev A SPECIFICATIONS All specifications are based on 25°C, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS INPUT SPECIFICATIONS Input Voltage Range Input Frequency Power Factor(7) Total Harmonic Distortion Input Current Inrush Current Leakage Current OUTPUT SPECIFICATIONS Output Voltage Output Current Tolerance Line Regulation 115VAC 230VAC 264VAC, @ Full Load @230VAC/ 50Hz, @Full Load 115VAC 230VAC 277VAC @230VAC, Cold Start 277VAC Dimensions (L x W x H) EMI EMS 5/2/2016 Max Unit 305VAC 63 VAC Hz >0.98 >0.96 >0.94 <20 0.75 0.4 0.35 60 <0.75 -5 -1 Hold-Up Time Output Power Ripple & Noise(2) Output Ripple Current PROTECTION Short Circuit Protection Over Voltage Protection Over Temperature Protection(8) Auto Recovery Over Temperature De-Rated(8) Over 70ºC, Fixed 75% load output ENVIRONMENTAL SPECIFICATIONS Operating Temperature Storage Temperature Operating Humidity Non-Condensing Storage Humidity IEC 68-2-2-1995/CNS-3629-C6016/GB/T 2423.10-2008; Vibration 5-500Hz, 1.0G, 1 Oct/min, 2 Cycle X, Y, Z, 75 Minutes MTBF MIL-HDBK02175 (25ºC) I/P-O/P Hi-Pot I/P-PE O/P-PE Insulation Resistance I/P-O/P, I/P-PE, O/P-PE: >100MΩ/ 500VDC/ 25ºC/ 70%RH GENERAL SPECIFICATIONS Efficiency Life Time 230VAC, 100% Load, @ T-Case 70ºC Lightning Surge 10KV (L/N-PE) & 5KV(L-N)/1.2*50µ sec PHYSICAL SPECIFICATIONS Weight Case Material SAFETY & EMC CHARACTERISTICS Safety Standards Typ 90 47 @115VAC @230VAC, @Full Load 115VAC, @Full Load Turn-On Time Min % A A peak mA See Table +5 +1 1.5 0.5 12 -5 % % S mS See Table See Table +5 % Auto Recovery or Power Reset Power Reset 75 85 95 ºC -40 -40 10 10 70 85 95 95 350 ºC ºC %RH %RH Khrs 3.75 2 0.5 KVAC See Table 50,000 Hrs 1.61 lbs (730g) 6.69 x 2.48 x 1.57in (170 x 63 x 40mm) Aluminum UL 8750, EN 61347-1, EN 61347-2-13, GB 19510.1, GB 19510.14 EN 55015, EN 61000-3-2, EN61000-3-3 FCC Part18 CNS 14115 GB 17743 EN 61547 EN 61000 (4-2, 4-3, 4-4, 4-5, 4-6, 4-8, 4-11) GB 17625.1 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 2 of 6 PSMDC060 SERIES 60~70W LED Driver AC/DC Single Output Series Rev A NOTES (1) (2) (3) (4) (5) (6) (7) (8) PSMDC-060-XXX: Type A: IP65 Grade, Output Current Adjustable by Internal Variable Reisitor Type B: IP67 Grade, Output Current Dimming by 0~10V/10V PWM signal/resistor For Input Voltage Range, please refer to “Input Voltage De-Rating Curve” Chart Ripple current is measured at 20MHz of bandwidth. The measured terminal is paralleled with a 22uF E-cap and a 0.1uF ceramic cap. For Type A Only Please refer to “LED Driving Output Mode” Chart For efficiency test conditions, please refer to “Efficiency Vs Load” Chart Please refer to “PFC Vs Load Curve” Chart Please refer to “Temperature De-Rating Curve” Chart DERATING CURVES Output Load De-Rating Curve 5/2/2016 Temperature De-Rating Curve Input Voltage De-Rating Curve Efficiency Vs Load (PSMDC-060-0700) Power Factor Vs Load (PSMDC-060-0700) Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 3 of 6 Rev A PSMDC060 SERIES 60~70W LED Driver AC/DC Single Output Series DIMMING CURVE (PSMDC-060-1750) MECHANICAL DRAWINGS Type A 5/2/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 4 of 6 PSMDC060 SERIES 60~70W LED Driver AC/DC Single Output Series Rev A Type B Dimming Mode (Type B Only) *Short~100KΩ Adjust Output Current Resistor Value Rated Current Rate Short 10KΩ 20KΩ 30KΩ 40KΩ 50KΩ 60KΩ 70KΩ 80KΩ 90KΩ 100KΩ OPEN 2.2% 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 95~105% 2V 3V 4V 5V 6V 7V 8V 9V 10V OPEN 20% 30% 40% 50% 60% 70% 80% 90% 100% 95~105% 60% 70% 80% 90% 100% OPEN 60% 70% 80% 90% 100% 95~105% *0~10VDC Adjust Output Current VDC 0V 1V Rated 2.2% 10% Current Rate *10 V PWM Adjust Output Current; Frequency Range 100Hz~3KHz Duty 0% 10% 20% 30% 40% 50% Rated 2.2% 10% 20% 30% 40% 50% Current Rate 5/2/2016 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 5 of 6 Rev A PSMDC060 SERIES 60~70W LED Driver AC/DC Single Output Series FUNCTION BLOCK LED DRIVING OUTPUT MODE LED Driver output characteristics with constant voltage mode (CV) & constant current mode (CC) to direct drive all kinds of LED lighting correctly COMPANY INFORMATION Wall Industries, Inc. has created custom and modified units for over 50 years. Our in-house research and development engineers will provide a solution that exceeds your performance requirements on-time and on budget. Our ISO9001-2008 certification is just one example of our commitment to producing a high quality, well-documented product for our customers. Our past projects demonstrate our commitment to you, our customer. Wall Industries, Inc. has a reputation for working closely with its customers to ensure each solution meets or exceeds form, fit and function requirements. We will continue to provide ongoing support for your project above and beyond the design and production phases. Give us a call today to discuss your future projects. Contact Wall Industries for further information: Phone: Toll Free: Fax: E-mail: Web: Address: 5/2/2016 (603)778-2300 (888)597-9255 (603)778-9797 [email protected] www.wallindustries.com 37 Industrial Drive Exeter, NH 03833 Wall Industries, Inc. • 37 Industrial Drive, Exeter, NH 03833 • Tel: 603-778-2300 • Toll Free: 888-597-9255 • Fax 603-778-9797 website: www.wallindustries.com • e-mail: [email protected] Page 6 of 6