V I S H AY I N T E R T E C H N O L O G Y, I N C . Capicitors - Wet Tantalum Arrays and Assemblies I INNOVAT AND TEC O L OGY Tantalum N HN CAPACITORS O 19 62-2012 Wet Tantalum Arrays and Assemblies Standard Arrays and Assemblies Custom Design Assemblies C u s t o m C a s e a n d Te r m i n a t i o n O p t i o n s H i g h C a p a c i t a n c e a n d / o r H i g h Vo l t a g e O p t i o n s Single or Dual Ratings D i e l e c t r i c O p t i o n s : A l u m i n u m , C e r a m i c , Ta n t a l u m RESOURCES • Datasheets: http://www.vishay.com/capacitors/tantalum-wet/ • FIT calculator: http://www.vishay.com/capacitors/tantalum/capacitors/tantalum/ tantalum-wet/tantalum-reliability-calculator-list/ • Technical support: [email protected] • Sales Contacts: http://www.vishay.com/doc?99914 One of the World’s Largest Manufacturers of Discrete Semiconductors and Passive Components SELECTOR GUIDE 1/6 VMN-SG2167-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Capicitors - Wet Tantalum Arrays and Assemblies Series Capacitance Range Voltage Range Case Size AND TEC I INNOVAT O L OGY Tantalum N HN CAPACITORS O 19 62-2012 Features Arrays and Assemblies 285D 1.0 µF to 410 µF 6 V to 300 V 70 µF to 15 000 µF 6 V to 150 V Tantalex®, Tantalum Case, A, B, C, D, E, F, Replacement for Tantalum Foil G, H M39006/01, /02, /03, /04, /16, /17 Series 200D, 202D DSCC 04021 70 µF to 2400 µF 15 V to 150 V A1 - A5, B1 B7, D3 Tantalex®, Tantalum Case, Hermetic Seal, TANTAPAK Capacitor Assemblies Tantalum Case, Hermetic Seal, A1, A2, A3, A4, Capacitor Assemblies, Replacement A5 for MIL-DTL-3965/21 (CL55) 211D 70 µF to 14 000 µF 10 V to 150 V A1 - A5, B1 - B7 2.0 µF to 2200 µF 8 V to 630 V A-M Tantalex®, Tantalum Case, Hermetic Seal, TANTAPAK Capacitor Assemblies XTH-K-L-M-V DSCC 04022 2.0 µF to 1300 µF 8 V to 630 V 1A, 1B, 1C Cylindrical Case, Hermetic Seal, Capacitor Assemblies, Replacement for MIL-PRF-39006/18, /19, /20 (CLR10, CLR14, CLR17) Replacement for MIL-DTL-3965/20, /1, /19 (CL10, CL14, CL17) Cylindrical Case, Hermetic Seal, Capacitor Assemblies, Replacement for MIL-DTL-3965/20, /1, /19 (CL13, CL16, CL18) DSCC 04033 2.0 µF to 1300 µF 8 V to 630 V 1A, 1B, 1C 235 µF to 9100 µF 6 V to 125 V D Epoxy Resin Modules, Internal Button Elements with Tantalum Electrodes 220 µF to 6000 µF 6 V to 125 V B Epoxy Resin Modules, Internal Axial Lead, Tantalum Case, Hermetic Seal Elements MC2 MT2 SELECTOR GUIDE Cylindrical Case, Hermetic Seal, Capacitor Assemblies 2/6 VMN-SG2167-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Capicitors - Wet Tantalum Arrays and Assemblies AND TEC I INNOVAT O L OGY Tantalum N HN CAPACITORS O 19 62-2012 Custom Designs Custom designed capacitor assemblies are an important tool for circuit designers faced with extra high capacitance and/or voltage requirements not met by standard units. In most cases, Vishay capacitor assemblies employ internal sections of wet tantalum capacitors. However, an assembly may utilize solid tantalum, ceramics, and even aluminum internal sections, along with resistors and other components as needed to meet the electrical parameters and performance required. Dual or plural ratings are also available in a single assembly. Vishay capacitor assemblies have been used in avionics, military and space applications for many years. They are also an important component for oil exploration equipment and other industrial applications. The capacitor assembly may prove valuable in any application where there are high capacitance/voltage needs and critical space limitations exist, or multiple functions are required in one package. Because tantalum capacitors can be designed to provide a wide range of parameters, they allow simplified circuit design and a lower cost solution. Reliability depends on the capacitor elements used, while cost reflects both capacitor type picked and quantity required. Custom Arrays SELECTOR GUIDE 3/6 VMN-SG2167-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . INNOVAT O L OGY Tantalum Capicitors - Wet Tantalum Arrays and Assemblies AND TEC I CAPACITORS N HN O 19 62-2012 Capacitor Assembly Each Vishay custom capacitor assembly will be documented with a Vishay drawing as shown below, and assigned a unique part number. If there is a customer drawing, it will be noted here and all revisions will be fully documented. Notes Dimensions shown are metric ( ) values in parenthesis indicate inch equivalent. Electrical parameters: REV. DATE A B a) Temperature range: - 55 °C to 200 °C b) Capacitance at 120 Hz, 25 °C: 18 µF ± 20 % c) d) e) f) Voltage at 85 °C = 625 VDC Voltage at 200 °C = 300 VDC % dissipation factor at 120 Hz and 25 °C = 50 % max. Decay time (from 625 V to 3.5 V) < 2 min g) h) i) j) Reverse voltage capability: None Surge voltage capability: 1.15 times rated voltage at relevant temp. Max. RMS ripple at 40 kHz and 85 °C = 1.5 A Max. weight = TBD (should be less than 100 g) k) l) m) n) Resistors: RN55D2003F Capacitor sections: 5 pieces 134D (HT90-125L2I) Vishay SAP part number: 211D186X0625XTL4 Vishay non-standard number: 211DTL4 REVISION APPROVALS DWN BY 1/09 Change ripple from 2.0 A to 1.5 A preliminary, add marking, 3/09 Remove add Vishay SAP part number R. P. R. P. Array Labeling Below ------ - VE 211D TL4 F457 18 µF X0 625 VDC at 85 °C 9 Date Code + VE +++++ 13.70 (0.54") Printed Surface 6.35 (0.25") 10 Pins, 22 AWG. 0.63 (0.025") + VE 50.80 (2.00") 90 µF 90 µF 90 µF 90 µF 90 µF + + + + + 38.10 (1.50") 200 kΩ + 200 kΩ 200 kΩ + + + + + VE Pins (x5) 31.75 (1.25") + 200 kΩ - VE Pins (x5) + + + + 200 kΩ 10.16 (0.40") Insulation Plinth (Visible) - VE Note This sheet and all attached documents are the proprietary data of Vishay Tansitor and shall not be disclosed to unauthorized and/or third parties without our written consent. These documents shall be returned to us immediately upon request. SELECTOR GUIDE 40.64 (1.60") DATE: 11-26-08 DRAWN BY: TANSITOR ELECTRONICS, INC. R. P. PO BOX 230 WEST ROAD BENNINGTON, VT. 05201 APPROVALS: Standard tolerances ..XX ± 0.010 Fractions ± 1/64 ..XXX ± 0.005 Angular ± 0°30° ..XXXX ± 0.0005 Finish 125√ 4/6 TITLE: SCALE: Cap. Module, 18 µF at 300 VDC at 200 °C None DWG. NO.: 211D186X0625XTL4 VMN-SG2167-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Capicitors - Wet Tantalum Arrays and Assemblies AND TEC I INNOVAT O L OGY Tantalum N HN CAPACITORS O 19 62-2012 Capacitor Array Design Guide Inquiry date: _____________________ Name: __________________________________________________________Title: ______________________________________ Company: _______________________________________________________ Address: ________________________________________________________Phone: _____________________________________ ________________________________________________________Fax: ____________________________________ ________________________________________________________ Application Data Actual component use: ___________________________________________________________________________________________ ________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________ Physical environment: ____________________________________________________________________________________________ ________________________________________________________________________________________________________________ Shock level:__________________________________________ Vibration level: ___________________________________________ Assembly hermeticity requirements: ________________________________________________________________________________ ________________________________________________________________________________________________________________ Physical dimensions: Length ______________Width: _____________ Height: ______________ Physical, form factor, and mounting means: _________________________________________________________________________ ________________________________________________________________________________________________________________ ________________________________________________________________________________________________________________ Capacitance: _______________________ µF ________________________ tolerance (%) Working voltage: 85 ºC __________________, 125 ºC __________________ , other temperature ________________ºC Equivalent series resistance: (ESR) _______________ Ω, frequency _________________ (Hz), _________________ ºC Ripple current-magnitude: ________________ A, frequency _____________ (Hz) Impedance limit: _______________ Ω, frequency __________________ (Hz) DC leakage: _________________ µA SELECTOR GUIDE 5/6 VMN-SG2167-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 V I S H AY I N T E R T E C H N O L O G Y, I N C . Capicitors - Wet Tantalum Arrays and Assemblies I INNOVAT AND TEC O L OGY Tantalum N HN CAPACITORS O 19 62-2012 WORLDWIDE SALES CONTACTS THE AMERICAS EUROPE UNITED STATES GERMANY VISHAY AMERICAS ONE GREENWICH PLACE SHELTON, CT 06484 UNITED STATES PH: +1-402-563-6866 FAX: +1-402-563-6296 VISHAY ELECTRONIC GMBH DR.-FELIX-ZANDMAN-PLATZ 1 95100 SELB GERMANY PH: +49-9287-71-0 FAX: +49-9287-70435 ASIA FRANCE SINGAPORE VISHAY INTERTECHNOLOGY ASIA PTE LTD. 37A TAMPINES STREET 92 #07-00 SINGAPORE 528886 PH: +65-6788-6668 FAX: +65-6788-0988 VISHAY S.A. 199, BD DE LA MADELEINE 06003 NICE, CEDEX 1 FRANCE PH: +33-4-9337-2727 FAX: +33-4-9337-2726 P.R. CHINA UNITED KINGDOM VISHAY CHINA CO., LTD. 15D, SUN TONG INFOPORT PLAZA 55 HUAI HAI WEST ROAD SHANGHAI 200030 P.R. CHINA PH: +86-21-5258 5000 FAX: +86-21-5258 7979 VISHAY LTD. SUITE 6C, TOWER HOUSE ST. CATHERINE’S COURT SUNDERLAND ENTERPRISE PARK SUNDERLAND SR5 3XJ UNITED KINGDOM PH: +44-191-516-8584 FAX: +44-191-549-9556 JAPAN VISHAY JAPAN CO., LTD. SHIBUYA PRESTIGE BLDG. 4F 3-12-22, SHIBUYA SHIBUYA-KU TOKYO 150-0002 JAPAN PH: +81-3-5466-7150 FAX: +81-3-5466-7160 SELECTOR GUIDE 6/6 VMN-SG2167-1203 THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000