TI321611B190

TI321611 (1206) Series
SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT)
Rev. B
A. Electrical Specifications:
P/N
TI321611B190
TI321611G310
TI321611G600
TI321611G800
TI321611G101
TI321611G601
TI321611U260
TI321611U310
TI321611U500
TI321611U600
TI321611U750
TI321611U800
TI321611U101
TI321611U121
TI321611U151
TI321611U221
TI321611U301
TI321611U391
TI321611U501
TI321611U601
TI321611U102
TI321611Z260
TI321611Z500
TI321611Z600
TI321611Z121
TI321611Z301
TI321611Z501
TI321611Z601
Impedance () ±25% @100MHz
19
31
60
80
100
600
26
31
50
60
75
80
100
120
150
220
300
390
500
600
1000
26
50
60
120
300
500
600
I rms. Max. (A)
6.0
4.0
4.0
4.0
3.0
2.0
6.0
6.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
3.0
2.5
3.0
3.0
2.0
6.0
3.0
3.0
3.0
3.0
3.0
3.0
DCR Max.()
0.015
0.030
0.030
0.030
0.030
0.200
0.010
0.010
0.025
0.040
0.040
0.040
0.040
0.040
0.050
0.050
0.050
0.070
0.060
0.060
0.200
0.010
0.030
0.030
0.050
0.050
0.060
0.080
B. Part Number Key:
TI
32
16
11
Y
XXX
IMPEDANCE VALUE
MATERIAL CODE: L, U, Z, B or G
DIMENSIONS:
LENGTH (a) x WIDTH (b) x THICKNESS (c)
FAMILY: TI
C. Dimensions: mm (Inch)
Series
TI321611(1206)
Tol.
a
3.2
(0.126)
± 0.2
(0.008 )
Frontier Electronics Corp.®
http://www.frontierusa.com
b
1.6
(0.063)
± 0.2
(0.008 )
c
1.1
(0.043)
± 0.2
(0.008 )
Page 1 of 2
d
0.5
(0.020)
± 0.3
(0.012 )
e
4.40
(0.173)
f
1.80
(0.071)
g
1.20
(0.047)
Typ.
Typ.
Typ.
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989
TI321611 (1206) Series
SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT)
Rev. B
D. Materials:
ITEM
Initial Permeability (µiac):
Maximum Permeability (µm):
Saturation Flux Density at 10 Oe:
Curie Temperature(Tc):
Volume Resistivity ():
Temperature Coefficient:
Density:
UNIT
------Gauss
°C
-m
1/10000°C
g/cm³
L
25
125
2000
>200
100000
10
4.8
B
45
125
2000
>200
100000
10
4.8
Material Code
G
110
250
1700
>130
100000
13
4.8
U
200
450
1400
>100
100000
5
4.8
Z
500
900
1500
>130
100000
12
4.8
E. Impedance Characteristics of Materials:
a.
b.
c.
d.
e.
f.
Z Material is for applications whose blocking regions are near 100 MHz.
L Material, an improvement of B Material has sharp impedance characteristic at high frequency.
G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low
insertion loss at high frequency.
Different materials are available for different application range.
With one material, higher impedance has sharper characteristics.
Please confirm the signal wave form to choose suitable products.
F. General Information:
1.
TI321611-yxxx, “TI” = Type, “32” = Length, “16” = Width, “11” = Thickness, “y” = Material, “xxx” =
Impedance.
2. Tolerance: ±25%
3. Small and lightweight surface mounting type
4. High-density packaging with a pitch of 2.54 mm (0.1 inch) max.is possible. This series requires less space and
have greater EMI suppression effects.
5. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability.
6. Applicable to both flow and IR reflow soldering.
7. High impedance covers wide frequency ranges.
8. TI series can be used in high current circuits due to its low DC resistance.
9. Operating temperature: -55C to +125ºC
10. Impedance and Current range: From 19  (6000 mA) to 1000  (2000 mA)
11. Unspecified values available on request.
12. MSL: Level 1.
G. Applications
1.
2.
3.
4.
5.
Game Consoles
Set Top Boxes
Cables Modems
Computers
Mobile Communication Devices (Cell Phones, Radios, etc.)
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 2 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989