FB451616U600

FB3225 Series, FB4516 Series, FB4532 Series
SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE)
Rev. B
A. Electrical Specifications:
P/N
FB322513U310
FB322513U330
FB322513U520
FB322513U600
Impedance () ±25% @100MHz
31
33
52
60
DCR Max.()
0.20
0.20
0.20
0.20
I rms. Max.(mA)
400
400
400
800
FB451616U600
FB451616U800
FB451616U121
FB451616U181
FB451616Z800
FB451616Z121
FB451616Z151
FB451616Z171
60
80
120
180
80
120
150
170
0.10
0.10
0.20
0.25
0.10
0.10
0.20
0.25
800
600
500
500
600
600
500
500
FB453215U700
FB453215U800
FB453215U121
FB453215U131
70
80
120
130
0.10
0.10
0.15
0.15
600
600
500
500
B. Dimensions: mm (In)
Series
FB322513
Tol.
FB451616
Tol.
FB453215
Tol.
a
3.2
(0.126)
± 0.2
(0.008 )
4.5
(0.177)
± 0.2
(0.008 )
4.5
(0.177)
± 0.2
(0.008 )
b
2.5
(0.098)
± 0.2
(0.008 )
1.6
(0.063)
± 0.2
(0.008 )
3.2
(0.126)
± 0.2
(0.008 )
c
1.3
(0.051)
± 0.2
(0.008 )
1.6
(0.063)
± 0.2
(0.008 )
1.5
(0.059)
± 0.2
(0.008 )
d
0.5
(0.020)
± 0.3
(0.012 )
0.5
(0.020)
± 0.3
(0.012 )
0.5
(0.020)
± 0.3
(0.012 )
e
4.40
(0.173)
f
2.70
(0.106)
g
1.20
(0.047)
Typ.
Typ.
Typ.
5.80
(0.228)
1.80
(0.071)
2.00
(0.079)
Typ.
Typ.
Typ.
5.80
(0.228)
3.40
(0.134)
2.00
(0.079)
Typ.
Typ.
Typ.
C. Part Number Key:
FB
AA
BB
CC
Y
XXX
IMPEDANCE VALUE
MATERIAL CODE: L, U, Z, B or G
DIMENSIONS:
LENGTH (a) x WIDTH (b) x THICKNESS (c)
FAMILY: FB
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 1 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989
FB3225 Series, FB4516 Series, FB4532 Series
SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE)
Rev. B
D. Materials:
ITEM
Initial Permeability (µiac):
Maximum Permeability (µm):
Saturation Flux Density at 10 Oe:
Curie Temperature(Tc):
Volume Resistivity ():
Temperature Coefficient:
Density:
UNIT
------Gauss
°C
-m
1/10000°C
g/cm³
L
25
125
2000
>200
100000
10
4.8
B
45
125
2000
>200
100000
10
4.8
Material Code
G
110
250
1700
>130
100000
13
4.8
U
200
450
1400
>100
100000
5
4.8
Z
500
900
1500
>130
100000
12
4.8
E. Impedance Characteristics of Materials:
a.
b.
c.
d.
e.
f.
Z Material is for applications whose blocking regions are near 100 MHz.
L Material, an improvement of B Material has sharp impedance characteristic at high frequency.
G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low
insertion loss at high frequency.
Different materials are available for different application range.
With one material, higher impedance has sharper characteristics.
Please confirm the signal wave form to choose suitable products.
F. General Information:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
FBAABBCC-yxxx, “FB” = Type, “AA” = Length, “BB” = Width, “CC” = Thickness, “y” = Material, “xxx” = Impedance.
Tolerance: ±25%
Small and lightweight surface mounting type.
Dimensions are suitable for automatic mounting
High-density packaging with a pitch of 2.54 mm (0.1 inch) max. is possible. This series requires less space and have greater EMI
suppression effects.
Different types with the same shape are available.
Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability.
Applicable to both flow and IR reflow soldering.
High impedance covers wide frequency ranges.
TI series can be used in high current circuits due to its low DC resistance.
Operating temperature: -55C to +125ºC
Unspecified values available on request.
MSL: Level 1.
Impedance and Current range:
a. FB322513 (1206) Series: From 31  (400 mA) to 60  (800 mA)
b. FB451616 (1806) Series: From 60  (800 mA) to 180  (500 mA)
c. FB453215 (1812) Series: From 70  (600 mA) to 130  (500 mA)
G. Applications:
1.
2.
3.
4.
5.
Game Consoles
Set Top Boxes
Cables Modems
Computers
Mobile Communication Devices (Cell Phones, Radios, etc.)
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 2 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989