FB100505 (0402) Series – SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE) Rev. A A. Electrical Specifications: DCR Max. (Ω) 0.05 0.15 0.15 0.20 0.25 0.25 0.35 0.50 0.65 0.65 0.85 0.20 0.30 0.35 0.35 0.40 0.50 0.65 0.85 0.05 0.30 0.40 0.50 0.50 0.70 0.80 1.00 1.00 1.30 1.50 Impedance (Ω) ±25% @100MHz 10 30 47 60 75 120 220 300 470 600 1000 30 60 80 120 220 300 470 600 10 30 60 75 120 220 300 470 600 1000 1500 P/N FB100505U100 FB100505U300 FB100505U470 FB100505U600 FB100505U750 FB100505U121 FB100505U221 FB100505U301 FB100505U471 FB100505U601 FB100505U102 FB100505Z300 FB100505Z600 FB100505Z800 FB100505Z121 FB100505Z221 FB100505Z301 FB100505Z471 FB100505Z601 FB100505G100 FB100505G300 FB100505G600 FB100505G750 FB100505G121 FB100505G221 FB100505G301 FB100505G471 FB100505G601 FB100505G102 FB100505G152 I rms. Max. (mA) 800 800 500 500 500 800 700 500 500 500 500 500 500 500 500 500 200 200 200 500 500 200 200 200 100 100 100 100 100 50 B. Dimensions: mm (Inch) Series a b c d e f g FB100505 1.0 ( 0.039) 0.5 (0.020) 0.5 (0.020) 0.25 (0.010) 2.20 (0.087) 0.70 (0.028) 0.40 (0.016) Tol. ± 0.1 (0.004 ) ± 0.1 (0.004 ) ± 0.1 (0.004 ) ± 0.15 (0.006 ) Typ. Typ. Typ. C. Part Number Key: FB 10 05 05 Y XXX IMPEDANCE VALUE MATERIAL CODE: L, U, Z, B or G DIMENSIONS: LENGTH (a) x WIDTH (b) x THICKNESS (c) FAMILY: FB ® Frontier Electronics Corp. http://www.frontierusa.com Page 1 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 FB100505 (0402) Series – SMD MULTILAYER FERRITE CHIP BEADS (HIGH IMPEDANCE) Rev. A D. Materials: ITEM Initial Permeability (µiac): Maximum Permeability (µm): Saturation Flux Density at 10 Oe: Curie Temperature(Tc): Volume Resistivity (ρ): Temperature Coefficient: Density: ------- L 25 125 B 45 125 Material Code G 110 250 U 200 450 Z 500 900 Gauss °C 2000 >200 2000 >200 1700 >130 1400 >100 1500 >130 Ω-m 1/10000°C 100000 10 100000 10 100000 13 100000 5 100000 12 g/cm³ 4.8 4.8 4.8 4.8 4.8 UNIT E. Impedance Characteristics of Materials: a. b. c. d. e. f. Z Material is for applications whose blocking regions are near 100 MHz. L Material, an improvement of B Material has sharp impedance characteristic at high frequency. G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low insertion loss at high frequency. Different materials are available for different application range. With one material, higher impedance has sharper characteristics. Please confirm the signal wave form to choose suitable products. F. General Information: 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. FB100505-yxxx, “FB100505” = P/N, “y” = Material, “xxx” = Impedance. Tolerance: ±25% Small and lightweight surface mounting type Dimensions are suitable for automatic mounting High-density packaging with a pitch of 2.54 mm (0.1 Inch) max. is possible. This series requires less space and have greater EMI suppression effects. Different types with the same shape are available. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability. Applicable to both flow and IR reflow soldering. High impedance covers wide frequency ranges. TI series can be used in high current circuits due to its low DC resistance. Operating temperature: -40°C to +125ºC Impedance and Current Range: From 10 Ω (800 mA) to 1500 Ω (50 mA) Unspecified values available on request. MSL: Level 1. G. Applications: 1. 2. 3. 4. 5. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989