FB321611G070

FB321611 (1206) Series – SMD MULTILAYER FERRITE CHIP BEADS
(HIGH IMPEDANCE)
Rev. B
A. Electrical Specifications:
P/N
FB321611Z260
FB321611Z310
FB321611Z600
FB321611Z800
FB321611Z121
FB321611Z221
FB321611Z301
FB321611Z601
FB321611Z102
FB321611Z122
FB321611Z202
FB321611U260
FB321611U310
FB321611U500
FB321611U700
FB321611U800
FB321611U121
FB321611U221
FB321611U301
FB321611U601
FB321611U102
FB321611U122
FB321611U152
FB321611U202
FB321611G070
FB321611G600
FB321611G800
FB321611G221
FB321611G301
FB321611G601
FB321611G102
FB321611G152
FB321611G202
FB321611B190
Impedance () ±25% @100MHz
26
31
60
80
120
220
300
600
1000
1200 (at 50 MHz)
2000 (at 30 MHz)
26
31
50
70
80
120
220
300
600
1000
1200 (at 50 MHz)
1500 (at 50 MHz)
2000 (at 30 MHz)
7
60
80
220
300
600
1000
1500
2000
19
I rms. Max. (mA)
500
500
400
600
500
400
400
300
200
200
200
600
600
600
800
800
500
500
800
600
500
500
500
500
500
500
500
600
500
300
300
300
200
600
DCR Max. ()
0.10
0.10
0.15
0.10
0.15
0.20
0.25
0.30
0.45
0.50
0.60
0.10
0.10
0.10
0.15
0.15
0.20
0.25
0.15
0.20
0.45
0.50
0.50
0.50
0.15
0.15
0.15
0.20
0.25
0.30
0.45
0.45
0.60
0.10
B. Dimensions: mm (Inch)
Series
FB321611
Tol.
a
b
c
d
e
f
g
3.2
(0.126)
± 0.2
(0.008 )
1.6
(0.063)
± 0.2
(0.008 )
1.1
(0.043)
± 0.2
(0.008 )
0.5
(0.020)
± 0.3
(0.012 )
4.40
(0.173)
1.80
(0.071)
1.20
(0.047)
Typ.
Typ.
Typ.
C. Part Number Key:
FB
32
16
11
Y
XXX
IMPEDANCE VALUE
MATERIAL CODE: L, U, Z, B or G
DIMENSIONS:
LENGTH (a) x WIDTH (b) x THICKNESS (c)
FAMILY: FB
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 1 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989
FB321611 (1206) Series – SMD MULTILAYER FERRITE CHIP BEADS
(HIGH IMPEDANCE)
Rev. B
D. Materials:
ITEM
Initial Permeability (µiac):
Maximum Permeability (µm):
Saturation Flux Density at 10 Oe:
Curie Temperature(Tc):
Volume Resistivity ():
Temperature Coefficient:
Density:
UNIT
------Gauss
°C
-m
1/10000°C
g/cm³
L
25
125
2000
>200
100000
10
4.8
B
45
125
2000
>200
100000
10
4.8
Material Code
G
110
250
1700
>130
100000
13
4.8
U
200
450
1400
>100
100000
5
4.8
Z
500
900
1500
>130
100000
12
4.8
E. Impedance Characteristics of Materials:
a.
b.
c.
d.
e.
f.
Z Material is for applications whose blocking regions are near 100 MHz.
L Material, an improvement of B Material has sharp impedance characteristic at high frequency.
G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low
insertion loss at high frequency.
Different materials are available for different application range.
With one material, higher impedance has sharper characteristics.
Please confirm the signal wave form to choose suitable products.
F. General Information:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
FB321611-yxxx, “FB321611” = P/N, “y” = Material, “xxx” = Impedance.
Tolerance: ±25%
Small and lightweight surface mounting type.
Dimensions are suitable for automatic mounting
High-density packaging with a pitch of 2.54 mm (0.1 inch) max. is possible. This series requires less space and have greater EMI
suppression effects.
Different types with the same shape are available.
Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability.
Applicable to both flow and IR reflow soldering.
High impedance covers wide frequency ranges.
TI series can be used in high current circuits due to its low DC resistance.
Operating temperature: -55C to +125ºC
Impedance and Current Range: From 7  (500 mA) to 2000  (200 mA)
Unspecified values available on request.
MSL: Level 1.
G. Applications:
1.
2.
3.
4.
5.
Game Consoles
Set Top Boxes
Cables Modems
Computers
Mobile Communication Devices (Cell Phones, Radios, etc.)
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 2 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989