TI453215U700

TI453215 (1812) Series
SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT)
Rev. B
A. Electrical Specifications:
P/N
Impedance () ±25% @100MHz
DCR Max.()
I rms. Max. (A)
TI453215U700
TI453215U800
TI453215U101
TI453215U121
TI453215U131
TI453215Z700
TI453215Z800
TI453215Z121
TI453215Z131
70
80
100
120
130
70
80
120
130
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
0.010
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
6.0
B. Part Number Key:
C. Dimensions: mm (Inch)
Series
a
4.5 (0.177)
b
3.2(0.126)
c
1.5 (0.059)
d
0.5(0.020)
e
5.80 (0.228)
f
3.40 (0.134)
g
2.00(0.079)
± 0.2 (0.008 )
± 0.2 (0.008 )
± 0.2 (0.008 )
± 0.3(0.012 )
Typ.
Typ.
Typ.
TI453215(1812)
Tol.
D. Materials:
ITEM
Initial Permeability (µiac):
Maximum Permeability (µm):
Saturation Flux Density at 10 Oe:
Curie Temperature(Tc):
Volume Resistivity ():
Temperature Coefficient:
Density:
UNIT
------Gauss
°C
-m
1/10000°C
g/cm³
L
25
125
2000
>200
100000
10
4.8
B
45
125
2000
>200
100000
10
4.8
Material Code
G
110
250
1700
>130
100000
13
4.8
U
200
450
1400
>100
100000
5
4.8
Z
500
900
1500
>130
100000
12
4.8
E. Impedance Characteristics of Materials:
a.
b.
c.
d.
e.
f.
Z Material is for applications whose blocking regions are near 100 MHz.
L Material, an improvement of B Material has sharp impedance characteristic at high frequency.
G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires
low insertion loss at high frequency.
Different materials are available for different application range.
With one material, higher impedance has sharper characteristics.
Please confirm the signal wave form to choose suitable products.
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 1 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989
TI453215 (1812) Series
SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT)
Rev. B
F. General Information:
1.
TI453215-yxxx, “TI” = Type, “45” = Length, “32” = Width, “15” = Thickness, “y” = Material, “xxx” =
Impedance,
2. Tolerance: ±25%
3. Small and lightweight surface mounting type
4. High-density packaging with a pitch of 2.54 mm (0.1 inch) max. is possible. This series requires less space and
have greater EMI suppression effects.
5. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability.
6. Applicable to both flow and IR reflow soldering.
7. High impedance covers wide frequency ranges.
8. TI series can be used in high current circuits due to its low DC resistance.
9. Operating temperature: -55C to +125ºC
10. Impedance and Current range: From 70  (6000 mA) to 130  (6000 mA)
11. Unspecified values available on request.
12. MSL: Level 1.
G. Applications:
1.
2.
3.
4.
5.
Game Consoles
Set Top Boxes
Cables Modems
Computers
Mobile Communication Devices (Cell Phones, Radios, etc.)
Frontier Electronics Corp.®
http://www.frontierusa.com
Page 2 of 2
667 E. Cochran St., Simi Valley, CA 93065
Phone: 1-805-522-9998, Fax: 1-805-522-9989