TI201209 (0805) Series SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT) Rev. A A. Electrical Specifications: P/N TI201209B070 TI201209G050 TI201209G070 TI201209G300 TI201209G600 TI201209G800 TI201209G121 TI201209G151 TI201209G221 TI201209G301 TI201209G601 TI201209U070 TI201209U100 TI201209U110 TI201209U150 TI201209U170 TI201209U200 TI201209U260 TI201209U300 TI201209U310 TI201209U400 TI201209U470 TI201209U600 TI201209U700 TI201209U800 TI201209U101 TI201209U121 TI201209U151 TI201209U181 TI201209U221 TI201209U301 TI201209U471 TI201209U601 TI201209U102 TI201209Z110 TI201209Z300 TI201209Z600 TI201209Z800 TI201209Z121 TI201209Z181 TI201209Z221 TI201209Z301 TI201209Z601 TI201209Z102 Impedance (Ω) ±25% @100MHz 7 5 7 30 60 80 120 150 220 300 600 7 10 11 15 17 20 26 30 31 40 47 60 70 80 100 120 150 180 220 300 470 600 1000 11 30 60 80 120 180 220 300 600 1000 DCR Max.(Ω) 0.010 0.040 0.040 0.040 0.040 0.060 0.080 0.080 0.100 0.100 0.150 0.010 0.010 0.010 0.025 0.025 0.010 0.020 0.010 0.010 0.025 0.050 0.050 0.060 0.060 0.040 0.040 0.060 0.080 0.080 0.100 0.150 0.150 0.300 0.010 0.020 0.020 0.030 0.060 0.080 0.080 0.100 0.150 0.300 I rms. Max.(A) 6.0 2.2 2.2 3.0 3.0 3.0 3.0 3.0 2.5 2.5 2.0 6.0 6.0 6.0 3.0 4.0 6.0 5.0 6.0 6.0 4.0 3.0 3.0 3.0 3.0 4.0 4.0 3.0 3.0 3.0 2.5 2.0 2.0 1.0 6.0 5.0 5.0 5.0 3.0 3.0 3.0 2.0 2.0 1.0 B. Part Number Key: TI 20 12 09 Y XXX IMPEDANCE VALUE MATERIAL CODE: L, U, Z, B or G DIMENSIONS: LENGTH (a) x WIDTH (b) x THICKNESS (c) FAMILY: TI C. Dimensions: mm (Inch) Series TI201209(0805 ) Tol. a 2.0 ( 0.079) ± 0.2 (0.008 ) Frontier Electronics Corp.® http://www.frontierusa.com b 1.2 ( 0.047) ± 0.2 (0.008 ) c 0.9 (0.035) ± 0.2 (0.008 ) Page 1 of 2 d 0.5 ( 0.020) ± 0.3 (0.012 ) e 3.20 (0.126) f 1.50 (0.059) g 0.60 (0.024) Typ. Typ. Typ. 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 TI201209 (0805) Series SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT) Rev. A D. Materials: ITEM Initial Permeability (µiac): Maximum Permeability (µm): Saturation Flux Density at 10 Oe: Curie Temperature(Tc): Volume Resistivity (ρ): Temperature Coefficient: Density: ------- L 25 125 B 45 125 Material Code G 110 250 U 200 450 Z 500 900 Gauss °C 2000 >200 2000 >200 1700 >130 1400 >100 1500 >130 Ω-m 1/10000°C 100000 10 100000 10 100000 13 100000 5 100000 12 g/cm³ 4.8 4.8 4.8 4.8 4.8 UNIT E. Impedance Characteristics of Materials: a. b. c. d. e. f. Z Material is for applications whose blocking regions are near 100 MHz. L Material, an improvement of B Material has sharp impedance characteristic at high frequency. G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low insertion loss at high frequency. Different materials are available for different application range. With one material, higher impedance has sharper characteristics. Please confirm the signal wave form to choose suitable products. F. General Information: 1. 2. 3. 4. TI201209-yxxx, “TI” = Type, “20” = Length, “12” = Width, “09” = Thickness, “y” = Material, “xxx”= Impedance. Tolerance: ±25% Small and lightweight surface mounting type High-density packaging with a pitch of 2.54 mm (0.1 inch) max. is possible. This series requires less space and have greater EMI suppression effects. 5. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability. 6. Applicable to both flow and IR reflow soldering. 7. High impedance covers wide frequency ranges. 8. TI series can be used in high current circuits due to its low DC resistance. 9. Operating temperature: -40°C to +125ºC 10. Impedance and Current range: From 5 Ω (2200 mA) to 1000 Ω (1000 mA) 11. Unspecified values available on request. 12. MSL: Level 1. G. Applications: 1. 2. 3. 4. 5. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989