TI160808 (0603) Series SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT) Rev. A A. Electrical Specifications: P/N I rms. Max. (A) Impedance (Ω) ±25% @100MHz DCR Max.(Ω) 5 0.100 1.0 TI160808B050 30 0.150 1.0 TI160808B300 100 0.200 1.0 TI160808B101 10 0.060 2.0 TI160808G100 60 0.100 2.0 TI160808G600 100 0.100 2.0 TI160808G101 300 0.200 2.0 TI160808G301 600 0.300 1.0 TI160808G601 10 0.010 5.0 TI160808U100 11 0.030 4.0 TI160808U110 19 0.030 3.0 TI160808U190 20 0.030 3.0 TI160808U200 22 0.030 3.0 TI160808U220 25 0.030 3.0 TI160808U250 27 0.030 4.0 TI160808U270 28 0.030 4.0 TI160808U280 30 0.030 4.0 TI160808U300 40 0.050 3.0 TI160808U400 47 0.050 3.0 TI160808U470 60 0.060 3.0 TI160808U600 68 0.060 3.0 TI160808U680 80 0.060 3.0 TI160808U800 100 0.080 2.5 TI160808U101 120 0.080 2.5 TI160808U121 150 0.080 2.5 TI160808U151 180 0.120 2.0 TI160808U181 220 0.150 2.0 TI160808U221 300 0.150 2.0 TI160808U301 470 0.200 1.0 TI160808U471 600 0.200 1.0 TI160808U601 22 0.030 3.0 TI160808Z220 30 0.030 3.0 TI160808Z300 50 0.060 3.0 TI160808Z500 80 0.060 2.5 TI160808Z800 120 0.080 2.5 TI160808Z121 150 0.080 2.5 TI160808Z151 220 0.150 2.0 TI160808Z221 300 0.150 2.0 TI160808Z301 470 0.200 1.0 TI160808Z471 600 0.200 1.0 TI160808Z601 Note: TI160808yxxx, “TI” = Type, “16” = Length, “08” = Width, “08” = Thickness, “y” = Material, “xxx” = Impedance. B. Part Number Key: TI 16 08 08 Y XXX IMPEDANCE VALUE MATERIAL CODE: L, U, Z, B or G DIMENSIONS: LENGTH (a) x WIDTH (b) x THICKNESS (c) FAMILY: TI C. Dimensions: mm (Inch) Series TI160808(0603) Tol. a 1.6 ( 0.063) ± 0.2 (0.008 ) Frontier Electronics Corp.® http://www.frontierusa.com b 0.8 (0.031) ± 0.2 (0.008 ) c 0.8 (0.031) ± 0.1 (0.004 ) Page 1 of 2 d 0.5 (0.020) ± 0.3 (0.012 ) e 2.80 (0.110) f 1.00 (0.039) g 0.60 (0.024) Typ. Typ. Typ. 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989 TI160808 (0603) Series SMD MULTILAYER FERRITE CHIP BEADS (HIGH CURRENT) Rev. A D. Materials: ITEM Initial Permeability (µiac): Maximum Permeability (µm): Saturation Flux Density at 10 Oe: Curie Temperature(Tc): Volume Resistivity (ρ): Temperature Coefficient: Density: ------- L 25 125 B 45 125 Material Code G 110 250 U 200 450 Z 500 900 Gauss °C 2000 >200 2000 >200 1700 >130 1400 >100 1500 >130 Ω-m 1/10000°C 100000 10 100000 10 100000 13 100000 5 100000 12 g/cm³ 4.8 4.8 4.8 4.8 4.8 UNIT E. Impedance Characteristics of Materials: a. b. c. d. e. f. Z Material is for applications whose blocking regions are near 100 MHz. L Material, an improvement of B Material has sharp impedance characteristic at high frequency. G Material is for application whose signal frequency is far from the cut off region. Suitable for application requires low insertion loss at high frequency. Different materials are available for different application range. With one material, higher impedance has sharper characteristics. Please confirm the signal wave form to choose suitable products. F. General Information: 1. TI160808-yxxx, “TI” = Type, “16” = Length, “08” = Width, “08” = Thickness, “y” = Material, “xxx” = Impedance. 2. Tolerance: ±25% 3. Small and lightweight surface mounting type. 4. High-density packaging with a pitch of 2.54 mm (0.1 inch) max. is possible. This series requires less space and have greater EMI suppression effects. 5. Excellent in physical properties, such as terminal strength, flexure strength, soldering resistance and solder-ability. 6. Applicable to both flow and IR reflow soldering. 7. High impedance covers wide frequency ranges. 8. TI series can be used in high current circuits due to its low DC resistance. 9. Operating temperature: -40°C to +125ºC 10. Impedance and Current range: From 5 Ω (1000 mA) to 600 Ω (1000 mA) 11. Unspecified values available on request. 12. MSL: Level 1. G. Applications 1. 2. 3. 4. 5. Game Consoles Set Top Boxes Cables Modems Computers Mobile Communication Devices (Cell Phones, Radios, etc.) Frontier Electronics Corp.® http://www.frontierusa.com Page 2 of 2 667 E. Cochran St., Simi Valley, CA 93065 Phone: 1-805-522-9998, Fax: 1-805-522-9989