KoTron ® 805 r.F. level Transmitter The Kotron series 805 is a budget minded but “full function” 24 V DC, 2-wire loop powered RF transmitter. The microprocessor based electronics allow the user to calibrate the 805 with only one small level change. The electronics are housed in an ergonomical dual compartment housing which is directly mounted on top of the probe. Budget minded level solution FEATurES • • • • • • • • Accepted, proven RF capacitance technology. Two-wire, 24 V DC, loop-powered level transmitter. One small level change needed for initial calibration. Full diagnostics if using HART® digital communication (optional). Innovative, ergonomic dual compartment housing. Transmitter head can be removed from probe without depressurizing the vessel. Two-line, 8-character LCD and 3-button keypad (optional). Probe designs: up to +540 °C / 345 bar (+1000 °F / 5000 psi). Transmitter with digital display and keypad: • Continuous local display of level, % and loop signal. • Fault identification via FAULT message on LCD. AppliCATionS • • • • Hydrocarbons & solvents. Corrosives, acids and caustics. Powders & granulars. High temperature/pressure liquids. AgEnCy ApprovAlS ATEX FM/CSA II 1G EEx ia IIC T4 (ambient -40 °C to +80 °C) II 1G EEx ia IIC T6 (ambient -40 °C to +40 °C) Intrinsically safe Non Incendive (Consult factory for proper partnumber) Worldwide level and flow solutions SElECTion dATA A complete measuring system consists of: 1. Kotron 805 transmitter head/electronics. 2. KOTRON® Probe; a full range of rigid and flexible probes for conductive and non-conductive media is available (see bulletin BE 50-125). Rigid probes: from 150 mm (6") to 6000 mm (20') insertion length. Flexible probes: from 1 m (3,28') to 45 m (150') insertion length. 1. order code for KoTron® 805 transmitter head/electronics BAsIC MODEL NUMBER 8 0 5 KOTRON® 805 transmitter POWER 5 24 V DC, two wire loop powered sIGNAL OUTPUT 0 1 4 - 20 mA analog output 4 - 20 mA analog output with HART® communication MENU LANGUAGE 0 1 2 3 4 None, for use with blind transmitter (requires HART® communication) English for use with transmitter with LCD display and keypad spanish for use with transmitter with LCD display and keypad French for use with transmitter with LCD display and keypad German for use with transmitter with LCD display and keypad ACCEssORIEs 0 A Blind transmitter (no display/keypad) - requires HART® communication Digital display and keypad APPROVAL 1 A Weatherproof Intrinsically safe, ATEX II 1G EEx ia II C T6 HOUsING 1 2 Cast aluminium, dual compartiment housing – IP 66 stainless steel, dual compartiment housing – IP 66 CABLE ENTRy 0 1 8 0 5 5 3/4" NPT (2 entries - one plugged) M20 x 1.5 (2 entries - one plugged) complete order code for KoTron® 805 transmitter head/electronics X = product with a specific customer requirement 2. order code for KoTron® probe (see bulletin BE 50-125) A complete line of rigid and flexible probes are available for the Kotron 805 Transmitter. Types of probes to choose from include: • Rigid insulated rod probes in Teflon® (TFE), Halar® (ECTFE), and Kynar® (PVDF) • Rigid bare probes in 316 ss (1.4401) and Hastelloy C (2.4816) • Rigid all plastic probes in Halar® (ECTFE), and Kynar® (PVDF) • Bent, ground wire, and inactive sheath probes in many of the above materials • stilling well probes • sanitary probes • Reference rod probes • Flexible probes FunCTionAl/pHySiCAl Description Specification Power (at terminals) General Purpose: 11 to 36 V DC ATEX Intrinsically safe: 11 to 28.6 V DC Output 4-20 mA or 4-20 mA with HART® 3.8 to 20.5 mA useable (meets NAMUR NE 43) span minimum 5 pF - maximum 10.000 pF Zero and Range 0 mm to 45 m (0' to 150') Resolution Analog: 0.01 mA Digital display: 0,1 cm (0.1") Loop Resistance ATEX Intrinsically safe/General Purpose: 650 Ω @ 24 V DC Damping Adjustable 1-45 s Diagnostic Alarm Adjustable 3.6 mA, 22 mA, HOLD (3.6 mA is not valid if unit includes HART®) Digital Communication (HART®) Version 5.x User Interface 3-button keypad and/or HART communicator Display 2-line x 8-character LCD Approvals ATEX II 1 G EEx ia IIC T4 (ambient temperature: -40 °C up to +80 °C) ATEX II 1 G EEx ia IIC T6 (ambient temperature: -40 °C up to +40 °C) Electrical Data Ui = 28,6 V, li = 140 mA, Pi = 1 W Housing Material Aluminium A356T6 (< 0.25% copper) or 316 ssT (1.4401) / IP 66 Equivalent Data Ci = 2,2 nF; Li = 0,037 mH Menu Language English/spanish/French or German Net and Gross Weight 2.70 kg net; 3.20 kg gross Overall Dimensions H 214 mm (8.43") x W 111 mm (4.38") x D 188 mm (7.40") proCESS CondiTionS Description Specification Maximum Process Temperature 540 °C @ 35 bar (1000 °F @ 500 PsIG) - depending probe selection Maximum Process Pressure 345 bar @ 40 °C (5000 PsIG @ 100 °F) - depending probe selection storage temperature -40 °C to +80 °C (-40 °F to +175 °F) Ambient temperature electronics -40 °C to +80 °C (-40 °F to +175 °F) Display not readable below -20 °C (-5 °F) Humidity 0-99 %, non-condensing Electromagnetic Compatibility Meets CE requirements (EN 61326: 1997 + A1 + A2) and NAMUR NE 21 pErForMAnCE Description Specification Reference conditions 20 °C (70 °F) Repeatability +/- 0.1% of span Accuracy +/- 0.5% of span or 2.5 mm whichever is greater Resolution 0.1 pF Linearity +/- 0.25% of span Response time less than 1 s (adjustable via damping) Ambient temperature effect approximately +0.03% per °C Warm up time less than 5 s 1200 20 mA 1000 800 Ω 23 mA 650 Ω 600 620 Ω 400 200 0 0 10 11 20 24 v dC 30 ouTpuT TABlE 40 v dC diMEnSionS in mm (inches) 105 (4.12) 83 (3.28) 45° view 200 (7.88) 214 (8.43) 126 (4.94) 98 (3.85) 111 (4.38) Kotron 805 Housing front view 45° 2 cable entries Mounting Flange 220 (8.66) probe insertion length Kotron 805 Housing side view optional Mounting Flange 220 (8.66) 3/4" npT 1" npT 1g (1" BSp) insertion length QuAliTy ASSurAnCE - iSo 9001 3/4" npT optional Anchor Assembly 5 (0.1875) 6 (0.2500) 124 (4.87) 13 (0.50) - bare probe 16 (0.625) - insulated probe rigid probe optional Mounting Flange 127 (5.00) 75 (2.95) 34 (1.32) Flexible probe optional Weight THE QUALITy AssURANCE sysTEM IN PLACE AT MAGNETROL GUARANTEEs THE HIGHEsT LEVEL OF QUALITy DURING THE DEsIGN, THE CONsTRUCTION AND THE sERVICE OF CONTROLs. OUR QUALITy AssURANCE sysTEM Is APPROVED AND CERTIFIED TO iSo 9001 AND OUR TOTAL COMPANy Is COMMITTED TO PROVIDING FULL CUsTOMER sATIsFACTION BOTH IN QUALITy PRODUCTs AND QUALITy sERVICE. produCT WArrAnTy :2008 ALL MAGNETROL ELECTRONIC AND ULTRAsONIC LEVEL CONTROLs ARE WARRANTED FREE OF DEFECTs IN MATERIALs AND WORKMANsHIP FOR ONE FULL yEAR FROM THE DATE OF ORIGINAL FACTORy sHIPMENT. IF RETURNED WITHIN THE WARRANTy PERIOD; AND, UPON FACTORy INsPECTION OF THE CONTROL, THE CAUsE OF THE CLAIM Is DETERMINED TO BE COVERED UNDER THE WARRANTy; THEN, MAGNETROL INTERNATIONAL WILL REPAIR OR REPLACE THE CONTROL AT NO COsT TO THE PURCHAsER (OR OWNER) OTHER THAN TRANsPORTATION. MAGNETROL sHALL NOT BE LIABLE FOR MIsAPPLICATION, LABOR CLAIMs, DIRECT OR CONsEQUENTIAL DAMAGE OR EXPENsE ARIsING FROM THE INsTALLATION OR UsE OF THE EQUIPMENT. THERE ARE NO OTHER WARRANTIEs EXPREssED OR IMPLIED, EXCEPT, sPECIAL WRITTEN WARRANTIEs COVERING sOME MAGNETROL PRODUCTs. BULLETIN N°: EFFECTIVE: sUPERsEDEs: UNDER REsERVE OF MODIFICATIONs Heikensstraat 6, 9240 Zele, België -Belgique Tel. +32 (0)52.45.11.11 • Fax. +32 (0)52.45.09.93 • E-Mail: [email protected] DEUTSCHLAND Alte Ziegelei 2-4, D-51491 Overath Tel. +49 (0)2204 / 9536-0 • Fax. +49 (0)2204 / 9536-53 • E-Mail: [email protected] INDIA B-506, Sagar Tech Plaza, Saki Naka Junction, Andheri (E), Mumbai - 400072 Tel. +91 22 2850 7903 • Fax. +91 22 2850 7904 • E-Mail: [email protected] ITALIA Via Arese 12, I-20159 Milano Tel. +39 02 607.22.98 • Fax. +39 02 668.66.52 • E-Mail: [email protected] RUSSIA 198095 Saint-Petersburg, Marshala Govorova street, house 35A, office 427 Tel. +7 812 320 70 87 • E-Mail: [email protected] U.A.E. UNITED KINGDOM DAFZA Office 5EA 722 • PO Box 293671 • Dubai Tel. +971-4-6091735 • Fax +971-4-6091736 • E-Mail: [email protected] Unit 1 Regent Business Centre, Jubilee Road Burgess Hill West Sussex RH 15 9TL Tel. +44 (0)1444 871313 • Fax +44 (0)1444 871317 • E-Mail: [email protected] www.magnetrol.com BENELUX FRANCE BE 50-160.3 JANUARy 2016 september 2001