Product Specification Dimensions Size Resolution 20 Full Frames [max. fps] 3 Monochrome 8,4 VEXU-24M 1/1.2” 1920 x 1200 38 1/1.2" 1920 x 1200 38 Color 37,8 1,2 CS-Mount 29 6,15 6 20 Notice Further technical details are available in the respective data sheets. 29 8,2 VEXU-24C 8 x M3 x 4 ø 28,7 Sensor Camera Type 30 22 2 x M3 x 4 Quick Start Guide VEXU Cameras (USB 3.0) 18 3 20 Latest software version and technical documentation available at: www.baumer.com/vision/login System Requirements Safety Safety Precautions Notice See the User's Guide for the complete safety instructions! Conformity: CE, RoHS CE We declare, under our sole responsibility, that the previously described Baumer VEXU cameras conform with the directives of the CE. RoHS All VEXU cameras comply with the recommendation of the European Union concerning RoHS Rules. CPU Caution Observe precautions for handling electrostatically sensitive devices! ▪▪ Protect the sensor from dirt and moisture. ▪▪ Do not allow the camera to become contaminated with foreign objects. Environmental Requirements Storage temp. Operating temp. Humidity -10°C ... +70°C see Heat Transmission 10 % ... 90 % Non-condensing Further Information For further information about our products, please visit www.baumer.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-845 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter is not guaranteed. Subject to change without notice. Printed in Germany 06/16. v1.0 11164079 Installation Single-camera system Multi-camera system Recommended Recommended Intel(R) Core(TM) i5-2520M Intel(R) Core(TM) i7-3770 CPU @ CPU @ 2.50GHz, Cores: 4 3.40GHz, Cores: 8 4 GB 8 GB RAM Operating Microsoft Windows 7 32 / 64 bit systems (required for USB 3.0) system Microsoft® Windows® 8 32 / 64 bit systems (required for USB 3.0) (OS) Microsoft® Windows® 10 32 / 64 bit systems (required for USB 3.0) ® ® Lens mount Notice Ensure the sensor and lens are not contaminated with dust and airborne particles when mounting the support or the lens to the device! The following points are very important: ▪▪ Install the camera in an environment that is as dust free as possible! ▪▪ Keep the dust cover (bag) on the camera for as long as possible! ▪▪ Hold the camera with the sensor downwards if the sensor is uncovered. ▪▪ Avoid contact with any of the camera‘s optical surfaces! General Description Heat Transmission LED signals Caution 1 Heat can damage the camera. Heat must be dissipated adequately to ensure that the temperature does not exceed the values in the table below. As there are numerous possibilities for installation, Baumer recommends no specific method for proper heat dissipation, but suggest the following principles: 2 ▪▪ operate the cameras only in mounted condition ▪▪ mounting in combination with forced convection may provide proper heat dissipation LED T 4 No. Description 3 No. 1 Lens mount (CS-Mount) 2 Digital IO 3 USB 3.0 port Description 4 LED Signal Meaning green flash Power on green USB 3.0 connection red USB 2.0 connection yellow Readout active LED red flash Data Interface / Digital IOs Update Installation VBUS 6 MicB_SSTX- 2 D- 7 MicB_SSTX+ 3 D+ 8 GND_DRAIN 4 ID 9 MicB_SSRX- 5 GND 10 MicB_SSRX+ 1. Check camera operation using the LED signals. 2. Check connection using Windows Device Manager: open wire → If device is not listed: • Check the host controller power supply. • Check USB 3.0 cable and connection. → If device is regularly not listed • Check USB 3.0 driver installation. 2 4 3 brown white Troubleshooting → If LED is red: • Camera is connected to USB 2.0 (settings possible). Digital IOs (on camera side) wire colors of the connecting cable (ordered separately) VCC (Out) IN+ 65°C (149°F) ▪▪ Connect the camera to the USB connection on your PC using an appropriate cable. ▪▪ If required, connect a trigger and / or flash to the digital IOs. 1 2 Maximum Temperature 6 7 8 9 10 1 1 Measurement Point (T) Installing the camera: USB 3.0 (Micro B) 1 23 45 Measurement Point 3 4 GND (IN) OUT blue black Installation example 1 - PCI USB board 2 - USB cable 3 - Cable for trigger and flash