Product Specification Dimensions Resolution Size 8 x M3 x 4 20 Full Frames [max. fps] 3 Monochrome VEXG-02M 1/4" 640 x 480 217 VEXG-13M 1/2" 1280 x 1024 61 VEXG-02C 1/4" 640 x 480 217 VEXG-13C 1/2" 1280 x 1024 61 8,9 Color 48,9 1,2 8,7 20 29 7,2 4,45 20 3 20 Latest software version and technical documentation available at: www.baumer.com/vision/login System Requirements Safety Safety Precautions Notice See the User's Guide for the complete safety instructions! Conformity: CE, RoHS CE We declare, under our sole responsibility, that the previously described Baumer VEXG cameras conform with the directives of the CE. RoHS All VEXG cameras comply with the recommendation of the European Union concerning RoHS Rules. CS-Mount 29 Notice Further technical details are available in the respective data sheets. Quick Start Guide VEXG Cameras (Gigabit Ethernet) ø 28,7 Sensor Camera Type 40 22 2 x M3 x 4 CPU Caution Observe precautions for handling electrostatically sensitive devices! ▪▪ Protect the sensor from dirt and moisture. ▪▪ Do not allow the camera to become contaminated with foreign objects. Environmental Requirements Storage temp. Operating temp. Humidity -10°C ... +70°C see Heat Transmission 10 % ... 90 % Non-condensing Further Information For further information about our products, please visit www.baumer.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter is not guaranteed. Subject to change without notice. Printed in Germany 06/16. v1.0 11164110 Installation Single-camera system Multi-camera system Recommended Recommended Intel(R) Core(TM) i5-2520M Intel(R) Core(TM) i7-3770 CPU @ CPU @ 2.50GHz, Cores: 4 3.40GHz, Cores: 8 RAM 4 GB 8 GB Operating Microsoft Windows 7 32 / 64 bit systems system Microsoft® Windows® 8 32 / 64 bit systems (OS) Microsoft® Windows® 10 32 / 64 bit systems ® ® Lens mount Notice Ensure the sensor and lens are not contaminated with dust and airborne particles when mounting the support or the lens to the device! The following points are very important: ▪▪ Install the camera in an environment that is as dust free as possible! ▪▪ Keep the dust cover (bag) on the camera for as long as possible! ▪▪ Hold the camera with the sensor downwards if the sensor is uncovered. ▪▪ Avoid contact with any of the camera‘s optical surfaces! General Description Heat Transmission LED signals 1 Caution Heat can damage the camera. Heat must be dissipated adequately to ensure that the temperature does not exceed the values in the table below. As there are numerous possibilities for installation, Baumer recommends no specific method for proper heat dissipation, but suggest the following principles: 2 ▪▪ operate the cameras only in mounted condition ▪▪ mounting in combination with forced convection may provide proper heat dissipation T 1 3 No. 1 2 Description No. Lens mount (C-Mount) Description 3 LED Ethernet Port (PoE) / Signaling LED´s 1 Power Supply / Digital IO 2 Meaning link active green flash receiving yellow static error yellow flash transmitting 8 Power VCC 1 MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- (negative / positive Vport) (negative / positive Vport) (positive / negative Vport) (positive / negative Vport) Measurement Point Measurement Point (T) 2 1 2 VCC (Power and OUT) IN+ brown white 12 V DC ± 20% ▪▪ Connect the camera using an appropriate cable (at least Cat-5e) to the GigE board on your PC. ▪▪ ▪▪ If required, connect a trigger and / or flash to process interface. ▪▪ Connect the camera to power supply. open wire 3 1 3 4 GND (Power and IN) blue OUT black 65°C (149°F) Installation of the camera: Power Supply / Digital IOs (on camera side) wire colors on connecting cable (ordered separately) 4 Maximum Temperature Installation Power Supply 8P8C mod jack with LEDs green/white green orange/white blue blue/white orange brown/white brown Signal green static Power Supply I Data Interface / Digital IOs 1 2 3 4 5 6 7 8 2 Installation sample 1 - PCI board 2 - GigE cable 3 - Power cable / Digital-IO