Product Specification Dimensions Size 8 x M3 x 4 [max. fps] 20 Resolution 22 Camera Type 40 Full Frames1) Monochrome 1/4" 640 x 480 595 ׀403 VCXG-13M 1/2" 1280 x 1024 145 ׀94 VCXG-25M 2/3" 1920 x 1200 59 ׀53 VCXG-53M 1" 2592 x 2048 28 ׀23 VCXG-02C 1/4" 640 x 480 595 ׀403 VCXG-13C 1/2" 1280 x 1024 145 ׀94 VCXG-25C 2/3" 1920 x 1200 59 ׀53 VCXG-53C 1" 2592 x 2048 28 ׀23 3 8,9 1) System Requirements Safety Safety Precautions Notice See the User's Guide for the complete safety instructions! We declare, under our sole responsibility, that the previously described Baumer VCXG cameras conform with the directives of the CE. RoHS All VCXG cameras comply with the recommendation of the European Union concerning RoHS Rules. CPU Caution Observe precautions for handling electrostatically sensitive devices! ▪▪ Protect the sensor from dirt and moisture. ▪▪ Do not allow the camera to become contaminated with foreign objects. Environmental Requirements Storage temp. Operating temp. Humidity 8,7 29 7,2 4,45 20 Burst Mode (image acqusition in the camera´s internal memory) ׀interface -10°C ... +70°C see Heat Transmission 10 % ... 90 % Non-condensing Further Information For further information about our products, please visit www.baumer.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-845 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter is not guaranteed. Subject to change without notice. Printed in Germany 06/16. v1.1 11164113 20 Notice Further technical details are available in the respective data sheets. www.baumer.com/vision/login CE C-Mount 3 Latest software version and technical documentation available at: Conformity: CE, RoHS 6,6 29 Color Quick Start Guide VCXG Cameras (Gigabit Ethernet) 48,9 20 VCXG-02M ø 28,7 2 x M3 x 4 Sensor Installation Single-camera system Multi-camera system Recommended Recommended Intel(R) Core(TM) i5-2520M Intel(R) Core(TM) i7-3770 CPU @ CPU @ 2.50GHz, Cores: 4 3.40GHz, Cores: 8 RAM 4 GB 8 GB Operating Microsoft Windows 7 32 / 64 bit systems system Microsoft® Windows® 8 32 / 64 bit systems (OS) Microsoft® Windows® 10 32 / 64 bit systems ® ® Lens mount Notice Ensure the sensor and lens are not contaminated with dust and airborne particles when mounting the support or the lens to the device! The following points are very important: ▪▪ Install the camera in an environment that is as dust free as possible! ▪▪ Keep the dust cover (bag) on the camera for as long as possible! ▪▪ Hold the camera with the sensor downwards if the sensor is uncovered. ▪▪ Avoid contact with any of the camera‘s optical surfaces! General Description Heat Transmission LED signals 1 Caution Heat can damage the camera. Heat must be dissipated adequately to ensure that the temperatures do not exceed the values in the table below. As there are numerous possibilities for installation, Baumer recommends no specific method for proper heat dissipation, but suggest the following principles: 2 ▪▪ operate the cameras only in mounted condition ▪▪ mounting in combination with forced convection may provide proper heat dissipation T 1 3 No. Description No. 1 Lens mount (C-Mount) 2 Digital IO Description 3 LED Ethernet Port (PoE) / Signaling LED´s 1 2 Data Interface / Digital IOs Notice The camera supports PoE (Power over Ethernet) IEEE 802.3af Clause 33, 48 V power supply. 8P8C mod jack with LEDs 8 1 2 3 4 5 6 7 8 green/white green orange/white blue blue/white orange brown/white brown Signal Meaning green link active green flash receiving yellow static error yellow flash transmitting Power Supply Measurement Point (T) 12 … 24 VDC ± 20% Installation of the camera: ▪▪ without PoE: Connect the camera using an appropriate cable (at least Cat-5e) to the GigE board on your PC. ▪▪ Connect the camera to power supply. (positive / negative Vport) open wire Power Supply / Digital IOs (on camera side) M8 / 8 pins / wire colors of the connecting cable (ordered separately) 4 3 6 1 2 3 4 GPIO (Line2) Power VCC IN1 (Line0) GND IN1 white brown green yellow 5 6 7 8 2 7 1 8 Power VCC OUT1 OUT1 (Line3) GND (Power, GPIO) GPIO (Line1) 65°C (149°F) ▪▪ If required, connect a trigger and / or flash to process interface. (negative / positive Vport) (negative / positive Vport) (positive / negative Vport) 5 Maximum Temperature Installation Power Supply Power VCC Measurement Point ▪▪ PoE: Connect the camera using an appropriate cable (at least Cat-5e) to a free port of a PoE capable ethernet switch. Establish the connection between switch and GigE board on your PC. 1 MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 2 grey pink blue red Installation sample 1 - PCI board 2 - GigE cable 3 - PoE capable ethernet switch or Baumer PoE components 4 - Cable for trigger and flash