Product Specification Dimensions (except VLG-23M / VLG-23C, VLG-24M / VLG-24C) VisiLine– Innovative functionality Sensor Size Resolution Full Frames 33 26 [max. fps] 48,4 3,5 20 temperature measurement point 160 1288 x 960 42 VLG-20M / VLG-20C 1/1.8" 1624 x 1228 27 1/3“ 640 x 480 376 VLG-22M / VLG-22C 2/3" 2044 x 1084 55 Latest software version and technical documentation are available at: VLG-23M / VLG-23C 1/1.2“ 1920 x 1200 53 VLG-24M / VLG-24C 1/1.2“ 1920 x 1200 38.5 www.baumer.com/vision/login VLG-40M / VLG-40C 1" 2044 x 2044 29 8,6 656 x 490 1/3" Pixel 0,0 4 x M3 x 3 System Requirements 8,7 15,6 8,7 3,5 26 CMOS Sensor (monochrome / color) Safety Conformity: 26 1/4" VLG-12M / VLG-12C 33 26 VLG-02M / VLG-02C VLG-03M / VLG-03C C-Mount 14,2 CCD Sensor (monochrome / color) Quick Start Guide VisiLine cameras (Gigabit Ethernet) ø 30 2° 26 12 9,3 9,3 Camera Type 4 x M2 x 3 8 x M3 x 3 ▪▪ Flexible assembly ▪▪ RGB and YUV interpolation algorithms on board ▪▪ Bandwidth up to 1000 Mbit/sec for fast multi-camera operation ▪▪ Flexible system architecture due to cable length up to 100 m ▪▪ Baumer driver for reliable image transfer ▪▪ PoE (Power over Ethernet) Dimensions (VLG-23M / VLG-23C, VLG-24M / VLG-24C only) CE, RoHS Environmental Requirements Storage temp. Operating temp. Humidity -10°C ... +70°C see Heat Transmission 10 % ... 90 % Non-condensing Further Information For further information on our products visit www.baumer.com For technical issues, please contact our technical support: [email protected] · Phone +49 (0)3528 4386-0 · Fax +49 (0)3528 4386-86 © Baumer Optronic GmbH · Badstrasse 30 · DE-01454 Radeberg, Germany Technical data has been fully checked, but accuracy of printed matter not guaranteed. Subject to change without notice. Printed in Germany 05/14. v1.4 11107528 Graphic Ethernet Framework (optional) 33 26 48,4 3,5 Further technical details are available in the respective data sheet. C-Mount 13,6 20 temperature measurement point Pixel 0,0 4 x M3 x 3 Notice ø 30 26 12 9,5 9,3 ▪▪ Protect the sensor from dirt and moisture. ▪▪ Avoid camera contamination by foreign objects. Clock RAM Operating system (OS) 8,6 All VisiLine cameras comply with the recommendation of the European Union concerning RoHS Rules. See User´s Guide for the complete safety instructions! 4 x M2 x 3 26 RoHS CPU Notice 8,7 15,6 8,7 3,5 26 We declare, under our sole responsibility, that the previously described Baumer VisiLine cameras conform with the directives of the CE. Safety Precautions 8 x M3 x 5 33 26 CE Single-camera system Multi-camera system Minimum Recommended Minimum Recommended ® ® Intel Pentium 4 or comparable Intel® Core™ Duo comparable processor processor 2.5 GHz > 2.5 GHz 2.5 GHz 3 GHz 1024 MB 2048 MB 2048 MB > 2048 MB Microsoft® Windows® XP incl. Service Pack 2 or higher Microsoft® Windows® XP x64 incl. Service Pack 2 or higher Microsoft® Windows Vista™ 32 / 64 bit systems Microsoft® Windows 7 32 / 64 bit systems Linux® 32 / 64 bit systems from Kernel 2.6.xx recommended resolution 1280 x 1024, color depth at least 16 bit Gigabit Ethernet compliant NIC (recommended Intel® chipset) Windows® OS: .NET™ Framework 2.0 or higher Linux® OS: Mono 1.2.4 or higher General Description LED Signaling 1 Heat Transmission 2 Caution 1 2 Heat can damage the camera. Provide adequate dissipation of heat, to ensure that the temperature does not exceed the value in the table below. As there are numerous possibilities for installation, Baumer does not specify a specific method for proper heat dissipation. T 4 No. Description 1 3 No. 4 C-Mount lens connection LED Description Power supply / Digital-IO Signal Meaning green Link active green flash Receiving yellow Transmitting 1 2 Ethernet Port 3 Digital-IO 2 Installation Data Interface / Power Supply / Digital IOs Notice The VisiLine supports PoE (Power over Ethernet) IEEE 802.3af Clause 33, 48 V power supply. 8P8C mod jack with LEDs 8 1 2 3 4 5 6 7 8 green/white green orange/white blue blue/white orange brown/white brown MX1+ MX1MX2+ MX3+ MX3MX2MX4+ MX4- 1 (negative / positive Vport) (negative / positive Vport) (positive / negative Vport) (positive / negative Vport) 6 3 open wire ▪▪ If required, connect a trigger and / or flash to process interface. ▪▪ Connect the camera to power supply. Installation sample 1 - PCI board; 2 - GigE cable; 3 - Power cable / Digital-IO; 4 - Digital-IO Installation of cameras with PoE: ▪▪ Establish the connection between switch and GigE board on your PC. ▪▪ If required, connect a trigger and or flash to process interface. wire colors of the connecting cable 4 ▪▪ Connect the camera using an appropriate cable (at least Cat-5e) to the GigE board on your PC. ▪▪ Connect the camera using an appropriate cable (at least Cat-5e) to a free port of a PoE capable ethernet switch. Power supply / Digital-IO 5 Installation of the camera: 4 2 1 3 1 1 Power VCC brown 1 not used brown 2 IN 1 white 3 OUT 2 blue 3 GND blue 4 OUT 3 black 4 OUT 1 black Notice The electrical data are available in the respective data sheet. 5 Uext OUT grey 6 GND IN pink open wire Installation sample 1 - PCI board; 2 - GigE cable; 3 - PoE capable ethernet switch or Baumer PoE components; 4 - Cable for trigger and flash Measure Point T Maximal Temperature 50°C (122°F)