PBCN industrial Main features Capacitive ceramic sensor -1 … 0 bar up to 0 … 40 bar High overpressure resistance Abrasive and chemical resistant Robust stainless steel housing External programming of zero point and span with FlexProgrammer 9701 Applications Pneumatic Medical gas Factory automation HVAC Measuring range -1 ... 0 bar up to 0 ... 40 bar Turn down 2:1 Performance after Turn-Down Long term stability [Turn-Down] * [Accuracy] FS Accuracy (20 °C) ≤ 0.5% FS (Linearity, hysteresis, repeatabillity, error of span and zero point) 0.2% FS / Year Technical specifications Measuring principle Ceramic capacitive Measuring ranges -1 ... 0 bar up to 0 ... 40 bar Type of pressure Relative / Absolute Accuracy (20 °C) ≤ 0.5% FS Zero thermal drift ≤ ± 0.08% FS/10 K Span thermal drift ≤ ± 0.08% FS/10 K Long term stability 0.2% FS / Year Response time (10 … 90%) ≤ 5 ms (Linearity, hysteresis, repeatabillity, error of span and zero point) Process connections See page 3 50 g/11 ms 100 g/6 ms 3 x Imp. per Axis and direction Bump IEC60068-2-27 100 g/2 ms 4000 x Imp. per Axis and direction Random IEC60068-2-64 0.1 g2/Hz (20 Hz – 1 KHz) 30 min per axis (>10 g RMS) Electrical specification Output signal / Power supply Load impedance Current ouput Voltage output -25 ... + -25 ... + -25 ... + -25 ... + 4 … 20 mA / 8 … 32 VDC 0…10 V / 13 … 32 VDC RΩ = (Usupply-8 V) / 20 mA > 5 KΩ Insulation resistance >100 MΩ at 500 VDC Electrical connections See page 3 Material Process connection SS 1.4404 AISI 316L Housing SS 1.4301 AISI 304 Diaphragm Ceramic (96% Al2O3) Sealing NBR, EPDM, FKM (Viton®) Cable PUR Approvals CE conformity Environment Temperature Storage Compensated range Medium Ambient Shock IEC60068-2-27 EMC directive 2004/108/CE in accordance with EN 61000-4 70°C 70°C 70°C 70°C IP65 (EN 60529) up to IP67 depending on electrical connection Vibration IEC60068-2-6 1.5 mm p-p (10 – 55 Hz), 10 g (55 Hz – 2 KHz) 10 cycles within 2.5 h per axis 2013-06-26 Protection rating Design and specifications subject to change without notice Main characteristics Agriculture vehicules Energy Water treatment Pumps and compressors www.baumer.com Data sheet A11.26 Page 1 / 4 PBCN industrial Measuring ranges and overpressure safety Pressure in bar Pressure range -1 ... 0 0 ... 1 -1 ... 0.6 0 ... 1.6 -1 ... 1.5 0 ... 2.5 -1 ... 3 0 ... 4 -1 ... 5 0 ... 6 -1 ... 9 0 ... 10 -1 ... 15 0 ... 16 -1 ... 24 0 ... 25 -1 ... 39 0 ... 40 <5 < 14 < 30 < 50 < 105 Burst pressure ≥5 ≥ 14 ≥ 30 ≥ 50 ≥ 105 2013-06-26 Design and specifications subject to change without notice Over pressure www.baumer.com Data sheet A11.26 Page 2 / 4 PBCN industrial Electrical connections Signal at 4...20atmA / Signal 0...10Vat 0...10 V Signal 4...20 mA at / Signal Connector DIN 43650 M12 4-pins 4 1 +VS / +VS 3 IOUT / GND n.c. / +VOUT 3 2 n.c. / +VOUT IOUT / GND 1 2 +VS / +VS n.c. / +VOUT earth earth Cable output Field housing (Red) / +VS / +VS Not included in delivery clamping range: 8...10 mm n.c. / +VOUT (Blue) / IOUT / GND 4 3 2 1 IOUT / GND (White) / n.c. / +VOUT +VS / +VS (Shield) / earth (Shield) / earth Dimensions (mm) EN 175301-803A (DIN 43650 A) 4 pins, IP65 M12 4 pins, IP67 Shielded cable (1,5 m), IP67 Ø 34.5 Ø 6 to 8 12.5 M12 3 60 43.5 49.5 1 Ø 22.1 Hexa.: 23/flat Hexa.: 23/flat Hexa.: 23/flat Ø25 / angle Ø25 / angle Ø25 / angle 7.5 7.5 7.5 Ø 22.1 Ø 22.1 Hydraulic connections 23/plats angles vifs G 1/4 EN837 1/4 NPT 23 23 18 13 23 G 1/2 EN837 1/2 NPT 2013-06-26 G 1/4 DIN 3852-E 15 15 23/plats 25/angles Design and specifications subject to change without notice 52.5 2 www.baumer.com Data sheet A11.26 Page 3 / 4 PBCN industrial Ordering details PBCN industriel PBCN Model Pressure transmitter Housing material Stainless steel 1.4301 AISI 304 Accuracy 0.5% FS Pressure range and unit in bar -1...0 -1...0.6 -1...1.5 -1...3 -1...5 -1...9 -1...15 -1...24 -1...39 0...1 0...1.6 0...2.5 0...4 0...6 0...10 0...16 0...25 0...40 Kind of pressure Relative Absolute Output signal 4...20mA 0...10V Output connection M12, 4 pins DIN 43650, 4 pins Shielded cable (1.5 m) Process connection G ¼ EN 837 G ½ EN 837 ¼ NPT ½ NPT G ¼ DIN 3852 – 1 . 3 . xxx . x . xx . xx . xx . 2 . x PBCN – 1 . 3 . B59 B72 B74 B76 B77 B79 B81 B82 B1L B15 B16 B18 B19 B20 B22 B24 B26 B27 . R A . A1 A2 . 14 44 53 . 02 03 04 05 06 Process connection material Stainless steel 1.4404 AISI 316L . 2 Sealing NBR EPDM FKM (Viton®) . 2013-06-26 Design and specifications subject to change without notice 1 2 3 www.baumer.com Data sheet A11.26 Page 4 / 4