Product Sheet

V I S H AY I N T E R T E C H N O L O G Y, I N C .
OPTOCOUPLERS
VO3120, VO3150A
IGBT/MOSFET Drivers
Vishay, as a leading supplier of optocouplers, has a broad portfolio that features phototransistor, photodarlington, phototriac,
linear, and high-speed output devices, all packaged in extremely reliable surface-mount and through-hole packages. Adding to
this portfolio, Vishay is introducing a new family of IGBT/MOSFET drivers: the VO3120 and VO3150A. Designed for environments
with high temperature and high electrical noise, they are the ideal choice for industrial and consumer electronics applications.
They effectively provide isolation to meet extreme safety requirements and enhance noise decoupling between sensitive control
circuitry and the power stages of industrial power converters.
APPLICATIONS
FEATURES
• Output current of 2.5 A and 0.5 A
• DC brushless and AC motor drives
• Widest supply voltage: from 15 V to 32 V
• Inverters and DC/DC converters
• Low current consumption of 2.5 mA max
• Uninterruptible power supplies (UPS)
• Wide operating temperature range of
– 40 °C to + 110 °C
• Switch mode power supplies (SMPS)
• CMTI of 25 kV/μs
• Induction stove tops
• Propagation delay from 0.1 μs to 0.4 μs
• Plasma displays
• Welding equipment
• PWD max of 0.02 μs
RESOURCES
• Datasheets: http://www.vishay.com/doc?81808 and http://www.vishay.com/doc?81314
• IGBT/MOSFET gate drive optocoupler application note: http://www.vishay.com/ppg?81227
• For technical support, contact: [email protected]
• For further information: http://www.vishay.com/optocouplers/opto-driver/
• Sales contacts: http://www.vishay.com/doc?99914
One of the World’s Largest Manufacturers of
Discrete Semiconductors and Passive Components
PRODUCT SHEET
1/2
VMN-PT0400-1411
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
V I S H AY I N T E R T E C H N O L O G Y, I N C .
OPTOCOUPLERS
VO3120, VO3150A
WIDEST OPERATING SUPPLY
VOLTAGE RANGE
59 V
Breakdown
Typ
VCC
VIN
Vishay offers the widest operating
Control
voltage range from 15 V to 32 V.
input
The wide range enables engineers to
GND
design with IGBTs that recommend
negative gate drive for faster switching,
reduction in dV/dt induced turn on, and to
ensure the IGBT is off in electrically noisy environments.
Shield
RIN NC
Open
collector
A
6
C
35 V
Absolute
Max
32 V
Recommended
Max
30 V
Recommended
Max
VO
VO
NC
+ High Voltage
DC
Rgate
3-Phase
AC
-VEE
Competitor
Vishay
- High Voltage
DC
LOW CURRENT CONSUMPTION
Vishay’s opto-IGBT Drivers’ low quiescent current dissipation, as low as 1.5mA at 25 ºC and up to 2.5mA over their rated
temperature range, greatly simplify the biasing of the secondary Vcc directly from the high-voltage power buss using a simple
passive resistive divider network. In addition to the low quiescent current, the negative temperature coefficient nature of the
supply current has the added benefit that as ambient temperature increases the current and subsequent dissipated power
decreases. The end result is designs that require smaller thermal dissipation components, optimizing cost and efficiency.
HIGHER TEMPERATURE RATING
Vishay’s IGBT/MOSFET drivers have an ambient temperature rating from - 40 ºC to + 110 ºC. This makes them ideal for use in
applications that operate in industrial environments. Offering the highest isolation voltage of 5300 VRMS makes them even more
applicable to these industrial environments, as well as providing the necessary isolation and protection of electronic equipment.
PRODUCT SPECIFICATIONS
Recommended Operating
Conditions
Forward current
IF
7
16
mA
Supply current
V
15
32
V
Temperature
Tamb
- 40
110
°C
High-level supply current
ICCH
2.5
mA
Low-level supply current
ICCL
2.5
mA
UVLO threshold
Electrical
Switching
MAX
TYP.
VALUE
UNITS
PARAMETER
MIN
CHARACTERISTIC
SYMBOL
Output current (IO) for the new drivers is 2.5 A for the VO3120 and 0.5 A for the VO3150A. All other electrical and
switching characteristics are the same for both devices.
UVLO+
11
13.5
V
UVLO-
9.5
12
V
Isolation voltage
VISO
5300
VRMS
Threshold input voltage low to high
IFLH
5
mA
Threshold input voltage high to low
VFHL
0.8
Propagation delay time to logic low output
t PHL
0.1
0.4
μs
Propagation delay time to logic high output
t PLH
0.1
0.4
μs
Pulse width distortion
PWD
0.2
μs
Common mode transient immunity at logic high output
CMR H
25
35
kV/μs
Common mode transient immunity at logic low output
CMR L
25
35
kV/μs
V
CMTI
PRODUCT SHEET
2/2
VMN-PT0400-1411
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO
SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000