H-Series H-Series CIRCUIT BREAKER The H-Series hydraulic-magnetic circuit breaker provides maximum and dependable circuit protection, while providing a cost effective, compact solution. By meeting the IEC spacing requirements, the H-Series is the ideal choice for international market applications. It also features a “trip-free” mechanism, which will open the contacts when a fault condition occurs, even if the handle is held in the ON position. 1-3 poles; 1-35 amps; 65VDC, 80VDC, 250VAC; UL recognized, CSA accepted, TUV & CCC certified. Resources: Download 3D CAD Files IGS Product Highlights: Typical Applications: Choice of actuator styles UL1077, CCC, CSA, C22.2 and EN60934 approvals Compact size Temperature stable operation -40˚ C to +80˚ C Choice of terminals, including PCB Single or multi-pole configurations STP Telecom/Datacom Marine Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Email: [email protected] Application Support: [email protected] Phone: 860.793.9281 Fax: 860.793.9231 www.carlingtech.com 2 | H-Series Circuit Breaker - General Specifications Electrical Tables Table A: Lists UL Recognized, CSA Accepted and TUV Certified configurations and performance capabilities as a Component Supplementary Protector. H-SERIES: COMPONENT SUPPLEMENTARY PROTECTORS Voltage Circuit Configuration Max Rating Series 65 65 80 80 1 250 250 250 Current Rating Frequency Phase DC DC DC DC 50 / 60 50 / 60 50 / 60 Full Load Amps --------1 1 3 Minimum Poles 1 - 25 26 - 35 1 - 25 26 - 35 1 - 35 1 - 35 1 - 35 1 1 1 1 1 2 3 Short Circuit Capacity (Amps) UL CSA TUV Without Without (Icn) Without Backup Fuse Backup Fuse Backup Fuse 3000 3000 3000 3000 3000 3000 1000 1000 1000 1000 1000 1000 1500 1500 500 1500 1500 500 1500 1500 500 Application Codes UL CSA TC1, OL1, U1 TC1, OL1, U3 TC1, OL1, U1 TC1, OL1, U3 TC1, OL1, U1 TC1, OL1, U3 TC1, OL0, U3 TC1, OL1, U1 TC1, OL1, U3 TC1, OL1, U1 TC1, OL1, U3 TC1, OL1, U3 TC1, OL1, U3 TC1, OL0, U3 Notes: 1 Polarity Sensitive Electrical Maximum Voltage Current Ratings Auxiliary Switch Rating 250VAC 50/60Hz 80 VDC Standard current coils: 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 20.0, 25.0, 30.0, 32.0, 35.0 SPDT: 10.1A-250VAC, 1.0A-65VDC/0.5A-80VDC, 0.1A-125VAC (with gold contacts) Mechanical Endurance 10,000 ON-OFF operations @ 6 per minute; with rated current & voltage Physical Number of Poles Weight Internal Circuit Config. 1-3 Approx. 48 grams/pole (1.7 oz) Series and Switch Only (with or without auxiliary switch) Agency Approvals Typical Protector Resistance DCR and Impedance values are based on measurements by the voltmeter ammeter method. Rated current is applied for one hour at a voltage not less than 20 volts. Ambient temperature: 25 ℃; Tolerance: Below 10 amps +/- 25%; Above 10 amps +/-35% Impedance Chart Series Current Rating (Amps) DC-Ohms 50/60Hz-Ohms 1 2.5 5 7.5 10 15 20 25 30 35 0.85 0.13 0.035 0.018 0.010 0.006 0.005 0.003 0.0025 0.0021 0.87 0.15 0.036 0.019 0.011 0.0061 0.0051 0.0035 0.0026 0.0022 UL Recognized under the Component Recognition Program as Protectors, Supplementary (Guide QVNU2 File E75596) UL standard 1077 CCC certified, Certificate No. 2010010307447291 CSA Accepted Supplementary Protector CSA standard C22.2 No. 235 TUV certified to EN60934, Certificate No. R50204086 *Manufacturer reserves the right to change product specification without prior notice. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com H-Series Circuit Breaker - Handle Actuator – Ordering Scheme | 3 H A 3 1 Series 2 Actuator B 0 4 Circuit 3 Poles 24 5 Aux/Alarm Switch 6 Frequency & Delay 1 SERIES H 2 ACTUATOR 1 A Handle, one per pole 3 POLE 2 1 One B 2 Two 3 C 4 G 4 4 CIRCUIT A Switch Only (no coil) B Series Trip (current) 5 AUXILIARY / ALARM SWITCH 0 without Aux Switch 3 3 1 3 0.110 Q.C. term 4 3 3 2 0.110 Solder Lug 6 FREQUENCY & DELAY 03 3 DC 50/60HZ, Switch Only 10 DC, Instantaneous 11 DC, Ultra Short 12 DC, Short 14 DC, Medium 16 DC, Long 20 50/60 Hz Instantaneous 21 50/60 Ultra Short 22 50/60 Hz Short 24 50/60 Hz Medium 26 50/60 Hz Long Handle, one per unit Three Series Trip (voltage) Relay Trip (voltage) 450 7 Current Rating 1 B 1 8 Terminal 9 Actuator Color & Legend D C 10 Mounting Bezel/Barrier 11 Rating 12 Agency Approval 8 TERMINAL 6 1 Push ON 0.250 Tab (Q.C.) Printed Circuitboard Terminals 2 Screw 8-32 with upturned lugs L 90 Facing Left 3 Screw 8-32 (bus type) R 90 Facing Right A Screw M4 with upturned lugs S Straight B Screw M4 (bus type) T Straight, Long 9 ACTUATOR COLOR & LEGEND Actuator Color I-O ON-OFF White AB Black CD Red FG Green HJ Blue KL Yellow MN Gray PQ Orange RS Dual Legend Color 1Black 2White 3White 4White 5White 6Black 7Black 8Black 0.110 Q.C. term with gold contacts 0.110 PC term 30 31 32 34 36 42 4 44 4 46 4 52 4 54 4 56 4 DC, 50/60Hz, Instantaneous DC, 50/60Hz,Ultra Short DC, 50/60Hz, Short DC, 50/60Hz, Medium DC, 50/60Hz, Long 50/60 Hz Hi-Inrush Short 50/60 Hz Hi-Inrush Medium 50/60 Hz Hi-Inrush Long DC Hi-Inrush Short DC Hi-Inrush Medium DC Hi-Inrush Long 7 CURRENT RATING (AMPERES) 5 10 MOUNTING / BARRIERS MOUNTING STYLE Threaded Insert 1 6-32 x 0.195 inches A 6-32 x 0.195 inches 2 ISO M3 x 5mm B ISO M3 x 5mm 3 6-32 x 0.195 inches C 6-32 x 0.195 inches 4 ISO M3 x 5mm D ISO M3 x 5mm BARRIERS BEZEL no yes no yes no yes no yes domed domed domed domed flat flat flat flat 11 MAX. APPLICATION RATING A 65VDC D 250VAC M 6 80VDC 4 7 80VDC / 250VAC CODEAMPERES 4101.00 5121.25 4151.50 5171.75 4202.00 5222.25 4252.50 5272.75 4303.00 4353.50 4404.00 4454.50 4505.00 4555.50 4606.00 4656.50 4707.00 4757.50 4808.00 4858.50 4909.00 4959.50 61010.00 71010.50 61111.00 71111.50 61212.00 71212.50 61313.00 61414.00 61515.00 61616.00 61717.00 61818.00 62020.00 62222.00 62424.00 62525.00 63030.00 63232.00 63535.00 VOLTAGE RATING CODE RATING TRIP VOLTS A066DC 5DC A1212DC 10DC A1818DC 15DC A2424DC 20DC A3232DC 25DC A4848DC 40DC A65 65DC55DC J066AC5AC J12 12AC10AC J18 18AC15AC J24 24AC20AC J48 48AC40AC J65 65AC55AC K20 120AC65AC L40 240AC130AC B10 110DC59DC B20 120DC65DC 12 AGENCY APPROVAL A Without approvals C UL Recognized, CSA Accepted E UL Recognized, CSA Accepted, TUV Certified 5 UL Recognized, CSA Accepted, TUV Certified, CCC Certified Notes: 1 Actuator Option A: handle tie pin, spacer & retainers provided unassembled on multipole units. Actuator Option B: Handle location as viewed from front of panel: 2 pole: left pole; 3 pole: center pole 2 Standard multipole units have all poles identical, except when specifying auxiliary switch 3 Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole units, only one auxiliary switch is normally supplied, mounted in extreme right pole. 4 Separate Pole Type Voltage Coils not rated for continuous duty. Available only with delay code 10 & 20. Only Available with Agency code C. 5 For other current ratings, consult factory. 6 26-35A Polarity sensitive, only available as 1 pole unit. 7 Voltage code 4 available to 25A max. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 4 | H-Series Circuit Breaker - Curved Rocker Actuator – Ordering Scheme H J 3 1 Series 2 Actuator B 0 4 Circuit 3 Poles 10 5 Aux/Alarm Switch 6 Frequency & Delay 1 SERIES (VISI ROCKER) H 2 ACTUATOR 1 J Vertical - Indicator OFF 3 POLE 2 1 One 2 K Two 3 C 4 G 4 4 CIRCUIT A Switch Only (no coil) B Series Trip (current) 5 AUXILIARY / ALARM SWITCH 0 without Aux Switch 3 3 1 3 0.110 Q.C. term 4 3 3 2 0.110 Solder Lug 6 FREQUENCY & DELAY 03 3 DC 50/60HZ, Switch Only 10 DC, Instantaneous 11 DC, Ultra Short 12 DC, Short 14 DC, Medium 16 DC, Long 20 50/60 Hz Instantaneous 21 50/60 Ultra Short 22 50/60 Hz Short 24 50/60 Hz Medium 26 50/60 Hz Long Vertical - Indicator ON Three Series Trip (voltage) Relay Trip (voltage) 0.110 Q.C. term with gold contacts 0.110 PC term 30 31 32 34 36 42 4 44 4 46 4 52 4 54 4 56 4 DC, 50/60Hz, Instantaneous DC, 50/60Hz,Ultra Short DC, 50/60Hz, Short DC, 50/60Hz, Medium DC, 50/60Hz, Long 50/60 Hz Hi-Inrush Short 50/60 Hz Hi-Inrush Medium 50/60 Hz Hi-Inrush Long DC Hi-Inrush Short DC Hi-Inrush Medium DC Hi-Inrush Long 7 CURRENT RATING (AMPERES) 5 CODEAMPERES 4101.00 5121.25 4151.50 5171.75 4202.00 5222.25 4252.50 5272.75 4303.00 4353.50 4404.00 4454.50 4505.00 4555.50 4606.00 4656.50 4707.00 4757.50 4808.00 4858.50 4909.00 4959.50 61010.00 71010.50 61111.00 71111.50 61212.00 71212.50 61313.00 61414.00 61515.00 61616.00 61717.00 61818.00 62020.00 62222.00 62424.00 62525.00 63030.00 63232.00 63535.00 VOLTAGE RATING CODE RATING TRIP VOLTS A066DC 5DC A1212DC 10DC A1818DC 15DC A2424DC 20DC A3232DC 25DC A4848DC 40DC A65 65DC55DC J066AC5AC J12 12AC10AC J18 18AC15AC J24 24AC20AC J48 48AC40AC J65 65AC55AC K20 120AC65AC L40 240AC130AC B10 110DC59DC B20 120DC65DC 450 7 Current Rating 1 B 1 8 Terminal 9 Actuator Color & Legend A C 10 Mounting Bezel/Barrier 11 Rating 12 Agency Approval 8 TERMINAL 1 Push ON 0.250 Tab (Q.C.) Printed Circuitboard Terminals 2 Screw 8-32 with upturned lugs L 90 Facing Left 3 Screw 8-32 (bus type) R 90 Facing Right A Screw M4 with upturned lugs S Straight B Screw M4 (bus type) T Straight, Long 9 ACTUATOR COLOR & LEGEND Actuator Color I-O ON-OFF White AB Black CD Red FG Green HJ Blue KL Yellow MN Gray PQ Orange RS 10 MOUNTING / BARRIERS 6 MOUNTING STYLE BARRIERS Threaded Insert 1 6-32 x 0.195 inches no A 6-32 x 0.195 inches yes 2 ISO M3 x 5mm no B ISO M3 x 5mm yes 3 6-32 x 0.195 inches no C 6-32 x 0.195 inches yes 4 ISO M3 x 5mm no D ISO M3 x 5mm yes 5 6-32 x 0.195 inches no E 6-32 x 0.195 inches yes 6 ISO M3 x 5mm no F ISO M3 x 5mm yes 7 6-32 x 0.195 inches no G 6-32 x 0.195 inches yes 8 ISO M3 x 5mm no H ISO M3 x 5mm yes 9 6-32 x 0.195 inches no J 6-32 x 0.195 inches yes P ISO M3 x 5mm no K ISO M3 x 5mm yes Q 6-32 x 0.195 inches no L 6-32 x 0.195 inches yes U ISO M3 x 5mm no M ISO M3 x 5mm yes Dual 1 2 3 4 5 6 7 8 HALF ROCKER BRACKET GUARDCOLOR no Black no Black no Black no Black yes Black yes Black yes Black yes Black no White no White no White no White yes White yes White yes White yes White no Gray no Gray no Gray no Gray yes Gray yes Gray yes Gray yes Gray 11 MAX. APPLICATION RATING A 65VDC D 250VAC 7 M 80VDC 8 4 80VDC / 250VAC 12 AGENCY APPROVAL A Without approvals C UL Recognized, CSA Accepted E UL Recognized, CSA Accepted, TUV Certified 5 UL Recognized, CSA Accepted, TUV Certified, CCC Certified Notes: 1 Half guard construction have OFF protection for actuator 2 Standard multipole units have all poles identical, except when specifying auxiliary switch 3 Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole units, only one auxiliary switch is normally supplied, mounted in extreme right pole. 4 Separate Pole Type Voltage Coils not rated for continuous duty. Available only with delay code 10 & 20. Only Available with Agency code C. 5 For other current ratings, consult factory. 6 On Visi-Rocker,Visi portion of rocker cannot be the same color as the bezel. Remainder of rocker same color as bezel. 7 26-35A Polarity sensitive, only available as 1 pole unit. 8 Voltage code 4 available to 25A max. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com H-Series Circuit Breaker - Flat Rocker Actuator – Ordering Scheme | 5 H 3 3 1 Series 2 Actuator B 0 4 Circuit 3 Poles 10 5 Aux/Alarm Switch 6 Frequency & Delay 1 SERIES H 2 ACTUATOR 1 3 Single Color Vertical 4 Single Color Horizontal 3 POLE 2 1 One 7 8 2 Push-to-Reset, Single Color Vertical Push-to-Reset, Single Color Horizontal Two 3 C 4 G 4 4 CIRCUIT A Switch Only (no coil) B Series Trip (current) 5 AUXILIARY / ALARM SWITCH 0 without Aux Switch 3 3 1 3 0.110 Q.C. term 4 3 3 2 0.110 Solder Lug 6 FREQUENCY & DELAY 03 3 DC 50/60HZ, Switch Only 10 DC, Instantaneous 11 DC, Ultra Short 12 DC, Short 14 DC, Medium 16 DC, Long 20 50/60 Hz Instantaneous 21 50/60 Ultra Short 22 50/60 Hz Short 24 50/60 Hz Medium 26 50/60 Hz Long Three Series Trip (voltage) Relay Trip (voltage) DC, 50/60Hz, Instantaneous DC, 50/60Hz,Ultra Short DC, 50/60Hz, Short DC, 50/60Hz, Medium DC, 50/60Hz, Long 50/60 Hz Hi-Inrush Short 50/60 Hz Hi-Inrush Medium 50/60 Hz Hi-Inrush Long DC Hi-Inrush Short DC Hi-Inrush Medium DC Hi-Inrush Long 7 CURRENT RATING (AMPERES) 5 CODEAMPERES 4101.00 5121.25 4151.50 5171.75 4202.00 5222.25 4252.50 5272.75 4303.00 4353.50 4404.00 4454.50 4505.00 4555.50 4606.00 4656.50 4707.00 4757.50 4808.00 4858.50 4909.00 4959.50 61010.00 71010.50 61111.00 71111.50 61212.00 71212.50 61313.00 61414.00 61515.00 61616.00 61717.00 61818.00 62020.00 62222.00 62424.00 62525.00 63030.00 63232.00 63535.00 VOLTAGE RATING CODE RATING 1 B 1 8 Terminal 9 Actuator Color & Legend A C 10 Mounting Bezel/Barrier 11 Rating 10 MOUNTING / BARRIERS 6 MOUNTING STYLE BARRIERS Threaded Insert 1 6-32 x 0.195 inches no A 6-32 x 0.195 inches yes 2 ISO M3 x 5mm no B ISO M3 x 5mm yes 3 6-32 x 0.195 inches no C 6-32 x 0.195 inches yes 4 ISO M3 x 5mm no D ISO M3 x 5mm yes 5 6-32 x 0.195 inches no E 6-32 x 0.195 inches yes 6 ISO M3 x 5mm no F ISO M3 x 5mm yes 7 6-32 x 0.195 inches no G 6-32 x 0.195 inches yes 8 ISO M3 x 5mm no H ISO M3 x 5mm yes 9 6-32 x 0.195 inches no J 6-32 x 0.195 inches yes P ISO M3 x 5mm no K ISO M3 x 5mm yes Q 6-32 x 0.195 inches no L 6-32 x 0.195 inches yes U ISO M3 x 5mm no M ISO M3 x 5mm yes Dual Legend Color 1Black 2White 3White 4White 5White 6Black 7Black 8Black HALF ROCKER BRACKET GUARDCOLOR no Black no Black no Black no Black yes Black yes Black yes Black yes Black no White no White no White no White yes White yes White yes White yes White no Gray no Gray no Gray no Gray yes Gray yes Gray yes Gray yes Gray 11 MAX. APPLICATION RATING A 65VDC D 250VAC M 7 80VDC 4 8 80VDC / 250VAC TRIP VOLTS A066DC 5DC A1212DC 10DC A1818DC 15DC A2424DC 20DC A3232DC 25DC A4848DC 40DC A65 65DC55DC J066AC5AC J12 12AC10AC J18 18AC15AC J24 24AC20AC J48 48AC40AC J65 65AC55AC K20 120AC65AC L40 240AC130AC B10 110DC59DC B20 120DC65DC X0165AC special catalog # 12 Agency Approval 8 TERMINAL 1 Push ON 0.250 Tab (Q.C.) Printed Circuitboard Terminals 2 Screw 8-32 with upturned lugs L 90 Facing Left 3 Screw 8-32 (bus type) R 90 Facing Right A Screw M4 with upturned lugs S Straight B Screw M4 (bus type) T Straight, Long 9 ACTUATOR COLOR & LEGEND Actuator Color I-O ON-OFF White AB Black CD Red FG Green HJ Blue KL Yellow MN Gray PQ Orange RS 0.110 Q.C. term with gold contacts 0.110 PC term 30 31 32 34 36 42 4 44 4 46 4 52 4 54 4 56 4 450 7 Current Rating 12 AGENCY APPROVAL A Without approvals C UL Recognized, CSA Accepted E UL Recognized, CSA Accepted, TUV Certified 5 UL Recognized, CSA Accepted, TUV Certified, CCC Certified Notes: 1 Push-To-Reset actuator shave OFF portion of rocker shrouded 2 Standard multipole units have all poles identical, except when specifying auxiliary switch 3 Auxiliary switch available on Series Trip and Switch Only circuits to 32A. On multipole units, only one auxiliary switch is normally supplied, mounted in extreme right pole 4 Separate Pole Type Voltage Coils not rated for continuous duty. Available only with delay code 10 & 20. Only Available with Agency code C. 5 For other current ratings, consult factory. 6 On Visi-Rocker,Visi portion of rocker cannot be the same color as the bezel. Remainder of rocker same color as bezel. 7 26-35A Polarity sensitive, only available as 1 pole unit. 8 Voltage code 4 available to 25A max. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 6 | H-Series Circuit Breaker - Handle Actuator - Dimensional Specifications Dimensional Specifications: in. [mm] 1.854 [47.10] #6-32[M3] THREAD *0.138[3.50] DEEP 2 PLCS PER POLE 1.732 [44.00] 0.222 [5.63] LINE ON 0.669 [17.00] 60° 1-POLE (HA1) 0.535DIA[13.60] DOMED 0.650 [16.50] MAX. 1.654 [42.00] OFF 0.635 [16.13] 0.196 [4.99] 1.413 [35.90] 1.996 [50.70] 1.996 [50.70] LOAD TAB (Q.C.) TYPE SCREW TYPE 0.118 [3.00] SCREW TYPE TERMINALS IN SERIES TRIP CIRCUIT CONFIGURATION SHOWN. FOR OTHER CONFIGURATIONS,SEE CIRCUIT AND TERMINAL DIAGRAMS. FLAT LINE 1.260 [32.00] 2-POLE (HA2) 2-POLE (HB2) LOAD 0.630 [16.00] TYP 1.280 [32.50]MAX 1.280 [32.50] MAX. 3-POLE (HA3) 3-POLE (HB3) 0.630 [16.00] TYP 1.929 [49.00] MAX. 1.929 [49.00] MAX. +.010 -.000 0.156DIA [3.96] 2 PLCS TYP PER POLE LINE 1.260 [32.00] 0.787 [20.00] 0.630 [16.00TYP PER POLE] HA1, HB2, HB3 HA2,HB4 1.260 [32.00] LOAD POLE POLE POLE 1 2 3 MULTI-POLE IDENTIFICATION SCHEME AS VIEWED FROM TERMINAL END OF BREAKER. [+.25] [-.00] 0.551DIA [14.00] ONE PER POLE HA3 PANEL CUTOUT DETAIL TOLERANCES ±.005 [±.12] UNLESS OTHERWISE SPECIFIED Notes: 1. ALL[millimeters]. DIMENSIONS ARE IN INCHES 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. 2. TOLERANCE ±.020 [.51] UNLESS OTHERWISE SPECIFIED. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com H-Series Circuit Breaker - Curved Rocker Actuator - Dimensional Specifications | 7 Dimensional Specifications: in. [mm] #6-32[M3] THREAD *0.138[3.50] DEEP #6-32[M3] THREAD *0.138[3.50] 2 PLCS PER POLE DEEP 2 PLCS PER POLE 1-POLE (HJ1) 0.346 [8.80] 0.118 0.346 [3.00] [8.80] 1.726 [43.83] 1.726 [43.83] 1.382 [35.10] 1.382 [35.10] LINE 0.118 [3.00] 1.130 [28.70] 1.130 [28.70] 1.414 [35.90] 1.414 [35.90] 1.654 [42.00] 1.654 [42.00] 0.126 [3.20] 0.126 [3.20] LOAD 0.357 [9.08] 0.650 [16.51] MAX 0.650 [16.51] MAX 0.357 [9.08] 1.382 [35.11] 0.161 [4.08] 1.382 [35.11] 0.161 [4.08] 0.413 [10.50] 0.413 [10.50] 0.630 [16.00] SCREW TYPE TERMINALS IN SERIES TRIP CIRCUIT CONFIGURATION SHOWN. FOR OTHER CONFIGURATIONS, SEE CIRCUIT AND TERMINAL DIAGRAMS. 2.354 1.732 [59.78] [44.00] TAB(Q.C.)TYPE 2.354 [59.78] 2.354 [59.78] TAB(Q.C.)TYPE SCREW TYPE 2.354 [59.78] SCREW TYPE LINE 1.130 [28.70] 1.130 [28.70] 1.260 [32.01] 1.260 [32.01] 2-POLE (HJ2) 1.732 [44.00] OPTIONAL "ROCKER GUARD" OPTIONAL "ROCKER GUARD" LOAD 0.630 [16.00] 1.280 [32.51] MAX 1.280 [32.51] MAX 1.197 [30.40] 1.197 [30.40] LINE C 1.693 [43.01] 1.693 [43.01] 0.778 [19.75] LOAD 0.778 [19.75] 2-Ø0.156 [Ø3.96] 0.118 [2.99] 2-Ø0.156 [Ø3.96] 0.118 [2.99] 1.382 [35.10] 1.382 [35.10] LINE ON NC 1.929 [49.00] MAX 1.929 [49.00] MAX 0.630 [16.00] TYP 0.630 [16.00] TYP ON NC C 3-POLE (HJ3) 1.146 [29.12] 1.146 [29.12] 0.640 [16.27] LOAD 0.640 [16.27] POLE POLE POLE 1 2 3 MULTI-POLE IDENTIFICATION SCHEME AS VIEWED FROM TERMINAL END OF BREAKER. PANEL CUTOUT DETAIL TOLERANCE +.005[+.12] UNLESS OTHERWISE SPECIFIED Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 8 | H-Series Circuit Breaker - Flat Rocker Actuator - Dimensional Specifications Dimensional Specifications: in. [mm] PUSH-TO-RESET ACTUATOR #6-32[M3] THREAD *0.138[3.50] DEEP 2 PLCS PER POLE 1.726 1.130 [43.83] [28.70] 1.726 1.130 [43.83] [28.70] 1.726 1.130 [43.83] [28.70] 1.726 1.130 0.359 [9.12] [43.83] [28.70] 1.382 [35.10] 1-POLE (H31) 0.126 [3.20] 0.126 [3.20] 0.126 [3.20] 0.126 [3.20] 0.118 [3.00] 0.118 [3.00] 0.118 [3.00] 1.382 [35.10] 1.382 [35.10] 1.382 [35.10] 0.357 [9.06] 0.359 [9.12] 0.650 [16.51] MAX 0.650 [16.51] MAX 0.650 [16.51] MAX 0.650 [16.51] MAX 0.357 0.359 [9.06] [9.12] 0.357 [9.06] 0.359 [9.12] 0.357 [9.06] 0.118 [3.00] 1.732 [44.00] 0.126 [3.20] 0.126 [3.20] LOAD SCREW TYPE TERMINALS IN SERIES TRIP CIRCUIT CONFIGURATION SHOWN. FOR OTHER CONFIGURATIONS, SEE CIRCUIT AND TERMINAL DIAGRAMS. LINE 0.118 [3.00] 0.118 [3.00] 1.382 [35.10] 1.382 [35.10] 1.382 [35.10] 0.126 [3.20] 0.126 [3.20] 1.654 [42.00] 1.654 [42.00] 1.654 [42.00] 1.654 [42.00] 1.414 [35.90] 1.414 [35.90] 1.414 [35.90] 1.414 [35.90] 2.353 1.732[59.76] [44.00] TAB(Q.C.)TYPE 1.732[59.76] [44.00] 2.353 2.353 [59.76] TAB(Q.C.)TYPE 2.353 1.732[59.76] [44.00] SCREW TYPE TAB(Q.C.)TYPE 2.353 [59.76] 2.353 [59.76] SCREW TYPE 2.353 [59.76] TAB(Q.C.)TYPE SCREW TYPE 2.353 [59.76] SCREW TYPE 0.118 [3.00] 2-POLE (H71) LINE 1.382 [35.10] 0.650 [16.51] 1.726 1.130 [43.83] [28.70] 1.726 1.130 [43.83] [28.70] 1.726 1.130 [43.83] [28.70] 1.726 1.130 [9.12] [43.83]0.359 [28.70] MAX 0.650 [16.51] MAX 1.382 [35.11] 0.650 [16.51] MAX 1.382 [35.11] 0.650 [16.51] 1.382 [35.11]MAX 0.161 [4.08]0.359 [9.12] 0.161 [4.08] 1.382 [35.11] 0.161 [4.08] 2-POLE (H72) 0.161 [4.08]0.359 [9.12] 1.130 [28.70] 1.130 [28.70] 1.130 [28.70] 1.130 [28.70] 1.280 [32.51] MAX 0.630 [16.00] 1.280 [32.51] MAX 0.630 [16.00] 1.280 [32.51] MAX 0.630 [16.00] 1.280 [32.51] MAX 1.929 [49.00] MAX 1.929 [49.00] MAX 1.929 [49.00] MAX 1.929 [49.00] MAX LOAD 0.359 [9.12] 1.260 [32.01] 1.260 [32.01] 1.260 [32.01] 1.260 0.630 [16.00] [32.01] 3-POLE (H73) 0.118 [3.00] 0.630 [16.00] TYP 0.630 [16.00] TYP 0.630 [16.00] TYP 0.630 [16.00] TYP LINE LOAD 1.197 [30.40] 1.197 [30.40] 1.197 [30.40] LINE 1.197 1.693[30.40] [43.01] 1.693 [43.01] 1.693 [43.01] 1.693 [43.01] 0.778 [19.75] 0.778 [19.75] 0.778 [19.75] 2-Ø0.156 [Ø3.96] 0.778 [19.75] 2-Ø0.156 [Ø3.96] 2-Ø0.156 [Ø3.96] 2-Ø0.156 [Ø3.96] 1.382 [35.10] 1.382 [35.10] 1.382 [35.10] 1.382 [35.10] LOAD 0.118 [2.99] 0.118 [2.99] 0.118 [2.99] 0.118 [2.99] 1.146 [29.12] 1.146 [29.12] 1.146 [29.12] 1.146 [29.12] 0.640 [16.27] 0.640 [16.27] 0.640 [16.27] 0.640 [16.27] MULTI-POLE IDENTIFICATION SCHEME AS VIEWED FROM TERMINAL END OF BREAKER. PANEL CUTOUT DETAIL TOLERANCE +.005[+.12] UNLESS OTHERWISE SPECIFIED Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com H-Series Circuit Breaker - PC Terminal Diagrams | 9 PC Terminal Diagrams: in. [mm] PRINTED CIRCUIT BOARD MOUNTING TERMINAL CODE R PRINTED CIRCUIT BOARD MOUNTING TERMINAL CODE L PRINTED CIRCUIT BOARD MOUNTING TERMINAL CODE S & T Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 10 | H-Series Circuit Breaker - PC Terminal Diagrams PC Terminal Diagrams: in. [mm] P.C. FOOT PRINT FOR TERMINAL CODE R P.C. FOOT PRINT FOR TERMINAL CODE L P.C. FOOT PRINT FOR TERMINAL CODE S & T Notes: 1 All dimensions are in inches [millimeters]. 2 Tolerance ±.020 [.51] unless otherwise specified. Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com H-Series Circuit Breaker - Circuit & Terminal Diagrams | 11 Circuit & Terminal Diagrams: in. [mm] HANDLE POSITION VS. AUX SWITCH MODE STANDARD C/B CIRCUIT BREAKER MODE HANDLE POSITION OFF AUX. SWITCH MODE 30° OFF NC NO C NC NO C NC NO C ON 30° ON 30° ELECTRICAL TRIP OFF 0.381 [9.69] 0.047 [1.20] TERMINAL DIMENSIONAL DETAIL & RATING 0.264 [6.70] Ø0.067 [Ø1.71] TAB (Q.C.) ≤ 32 AMP 0.250 [6.35] 0.559 [14.19] 0.264 [6.70] 0.264 [6.70] 0.354 [9.00] 0.354 [9.00] 0.287 [7.29] BUS #8-32 ≤ 32 AMP M4 ≤ 32 AMP 0.047 [1.20] 0.197 [5.00] 0.197 [5.00] UPTURN LUG #8-32 ≤ 32 AMP M4 ≤ 32 AMP 0.806 [20.48] 0.197 [5.00] 0.315 [8.00] 0.047 [1.20] P.C. TERMINAL 90 FACING LEFT ≤ 32 AMP 90 FACING RIGHT ≤ 32 AMP 0.315 [8.00] P.C. TERMINAL P.C. TERMINAL STRAIGHT (SHORT) STRAIGHT (LONG) ≤ 32 AMP ≤ 32 AMP TABLE A TIGHTENING TORQUE SPECIFICATIONS 1.197 [30.40] 1.012 [25.70] THREAD SIZE #6-32 & M3 MOUNTING HARDWARE #8-32 & M4 THREAD TERMINAL SCREW LINE TORQUE 7-9 IN-LBS [0.8-1.0 NM] 12-15 IN-LBS [1.4-1.7 NM] 1.693 [43.00] TABLE B TERMINAL DESCRIPTION LOAD MAIN BARRIER FOR UL-RECOGNIZED MULTI-POLE BREAKERS AUX. SWITCH* SEE TABLE B LINE 1.413 [35.90] 1.508 [38.30] 1.732 [44.00] REF TAB (Q.C.) SCREW TYPE 1.996 [50.70] 1.996 [50.70] .110 TAB (Q.C.) 2.467 [62.67] SOLDER TYPE 2.252 [57.19] * AVAILABLE ON SERIES TRIP AND SWITCH ONLY CIRCUITS. WHEN CALLED FOR ON MULTI-POLE UNITS, ONLY ONE AUX. SWITCH IS NORMALLY SUPPLIED, AS SHOWN IN MULTI-POLE IDENTIFICATION SCHEME. 1.854 [47.10] LOAD DEPTH BEHIND PANEL 1.413 [35.90] 0.031 [0.80] 1. ALL DIMENSIONS ARE IN INCHES [mm] 2. TOLERANCE ±.020 [.51] UNLESS OTHERWISE SPECIFIED. 0.120 [3.05] Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Circuit & Terminal Diagrams: in. [mm] LOAD 1.996 CIRCUIT [50.70] BREAKER PROFILE 2 TERMINALS 5 TERMINALS 0.377 [9.58] STD. AUX. LINELINE SW. TUV.UL. C C MAIN TERMINALS NO (SEE TABLE A) NO NC NC LOAD STD. AUX. SW. 1.996 [50.70]LOAD UL STD. AUX. 35 TERMINALS LINE LINE SW. TUV.UL. 0.377 [9.58] 0.377 [9.58] C NO NC C NO NC 0.368 [9.36] STD. AUX. SW. LOAD LOAD UL TERMINALS 34 TERMINALS SERIES TRIP LINE LINE A LOAD SCHEMATIC CIRCUIT ANSI SWITCH ONLY (NO COIL) SWITCH ONLY WITH(NO AUXILIARY COIL) SWITCH C LINE LINE A A N0 B 0 LOAD C D A E N0 SHUNT B B 1 2 0 3 B 1 2 3 NC STANDARD LOAD AUX. SWITCH SERIES TRIP WITH AUXILIARY C LINE 1 0 2 3 N0 NC LOAD LOAD C N0 SWITCH ONLY (NO COIL) TRIPSWITCH WITH SHUNT AUXILIARY LINE LINE LINE LINE 1 2 0 3 NC LOAD LOAD CIRCUIT SCHEMATIC LOAD ANSI SERIES TRIP WITH AUXILIARY SERIES TRIP NC LOAD STANDARD AUX. SWITCH RELAY SHUNTTRIP TRIP LINE 0.377 [9.58] 0.641 [16.28] 1 2 LINE LINE 1 LOAD 4 RELAY 2 D F E G 0 3 0.368 [9.36] 0.368 [9.36] SHUNT 4 LOAD RELAY LOAD LOAD 4 TERMINALS AUXILIARY SWITCH TERMINAL DETAIL 1 0.641 [16.28] 2 0.602 [15.28] 4 0.368 [9.36] C LOAD LINE 1 NO NC 0.404 [10.26] RELAY 2 RELAY 0.342 [8.68] 0.110 [2.79] 1. ALL DIMENSIONS ARE IN INCHES [mm] 2. TOLERANCE ±.020 [.51] UNLESS OTHERWISE SPECIFIED. 3 0.237 [6.02] LOAD LOAD 0 AUXILIARY SWITCH0.050DIA[1.27] TERMINAL DETAIL LOAD LINE LINE F G 0.508 [12.91]4 LOAD 3 LINE 3 RELAY TRIP LINE 0.602 [15.28] 0.602 [15.28] C C NO NO NC NC 0.237 [6.02] 0.295 [7.49] 0.602 [15.28] TAB (Q.C.) 0.508 [12.91] 0.534 [13.56] 0.404 [10.26] 0.590 [14.99] 0.342 [8.68] 0.287 [7.29] 0.110 [2.79] 0.110 [2.79] SOLDER TYPE 0.056 [1.43] 0.110 [2.79] 0.126 [3.20] 0.056 [1.43] 0.110 [2.79] 0.590 [14.99] LINE 0.126 [3.20] 1. ALL DIMENSIONS ARE IN INCHES [mm] 2. TOLERANCE ±.020 [.51] UNLESS OTHERWISE SPECIFIED. 0.070DIA[1.78] 0.050DIA[1.27] 0.050DIA[1.27] TAB (Q.C.) TAB (Q.C.) 0.534 [13.56] 0.287 [7.29] C NO NC 0.050DIA[1.27] LOAD 0.295 [7.49] TAB (Q.C.) 0 CIRCUIT CODE AUX SWITCH CODE MAIN TERMINALS (SEE TABLE A) CIRCUIT SCHEMATIC ANSI CIRCUIT CODE AUX SWITCH CODE LINE CIRCUIT SCHEMATIC ANSI SWITCH ONLY (NO COIL) CIRCUIT CODE AUX SWITCH CODE CIRCUIT BREAKER PROFILE 2 TERMINALS CIRCUIT CODE AUX SWITCH CODE 12 | H-Series Circuit Breaker - Circuit & Terminal Diagrams 0.070DIA[1.78] SOLDER TYPE Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com 0.110 [2.79] Reps & Contact | 13 Authorized Sales Representatives Click on the group name on the map below to find your local representative or visit www.carlingtech.com/findarep. « « Matera W. Canada Matera E. Canada MIDWEST DM Michigan TEMCO Northwest Alaska, Hawaii « NORTHERN Hanna Lind Ltd. Melody Emery Sierra Bridge Marketing Omega Limited Dy-tronix Inc. LD. Allen Norris DM Assoc East Pacent DM Assoc TSI North TSI WEST Signal Enterprises Luscombe Engineering Pinnacle Marketing Matrix DM Mexico South America Mexico « « Sunbelt Components SOUTHEAST ProRep Solutions LATIN AMERICA Americas Europe Middle East Africa Asia-Pacific Oceania About Carling Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide, Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical components, they engineer powerful solutions! To learn more about Carling please visit www.carlingtech.com/company-profile. To view all of Carling’s environmental, quality, health & safety certifications please visit www.carlingtech.com/environmental-certifications Email: [email protected] Application Support: [email protected] Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com Worldwide Headquarters Carling Technologies, Inc. 60 Johnson Avenue, Plainville, CT 06062 Phone: 860.793.9281 Fax: 860.793.9231 Email: [email protected] Northern Region Sales Office: [email protected] Southeast Region Sales Office: [email protected] Midwest Region Sales Office: [email protected] West Region Sales Office: [email protected] Latin America Sales Office: [email protected] Asia-Pacific Headquarters Carling Technologies, Asia-Pacific Ltd., Kowloon, Hong Kong Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332 Email: [email protected] Shenzhen, China: [email protected] Shanghai, China: [email protected] Pune, India: [email protected] Kaohsiung, Taiwan: [email protected] Yokohama, Japan: [email protected] Europe | Middle East | Africa Headquarters Carling Technologies LTD 4 Airport Business Park, Exeter Airport, Clyst Honiton, Exeter, Devon, EX5 2UL, UK Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477 Email: [email protected] Germany: [email protected] France: [email protected] www.carlingtech.com REV_06_2016