C-Series Circuit Breaker Datasheet [pdf]

C-Series
C-Series
CIRCUIT BREAKER
The C-Series hydraulic-magnetic circuit breakers are ideal for applications that require higher amperage and
voltage handling capability in a smaller package. They are available in 1-6 poles, 0.02-100amps, UL Recognized
up to 480VAC or 150VDC, UL489 Listed up to 240VAC or 125VDC, with choice of time delays, terminal
options, actuator styles and colors. The C-Series employs a unique arc chute design which allows for higher
interrupting capacities of up to 10,000 amps. New thermoset glass filled polyester half shell construction
provides for increased mechanical and electrical strength. The wiping contacts, mechanical linkage with two
step actuation, clean contacts providing high, positive contact pressure and longer contact life. Available with
American Standard or Metric Threaded Stud terminals, or Saddle Clamp screw terminals. The optional mid-trip
handle style actuator allows a visual indication of electrical overload with or without alarm feature.
Product Highlights:
Extensive list of Agency Approvals
ŠŠ Available with Standard or Metric Stud terminals,
or Saddle Clamp screw terminals
ŠŠ Optional mid-trip handle style actuator
ŠŠ Unique arc chute design which allows for higher
interrupting capacities of up to 10,000 amps
ŠŠ Exclusive Rockerguard and Push-To-Reset bezel
ŠŠ Available with new solid color and two-color Visirocker® actuators
ŠŠ New thermoset glass filled polyester half shell
construction
ŠŠ
Typical Applications:
Marine
ŠŠ Telecom/Datacom
ŠŠ Military
ŠŠ Renewable Energy
ŠŠ Generators & Welders
ŠŠ
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Email: [email protected]
Application Support: [email protected]
Phone: 860.793.9281 Fax: 860.793.9231
www.carlingtech.com
2 | C-Series Circuit Breaker - General Specifications
Electrical
Maximum Voltage AC, 480 WYE/277 VAC, 50/60 Hz
(see Table A.)
UL489: AC,240 VAC. (See Table D),
50/60 Hz, 125 VDC
Current Rating Standard current coils: 0.100, 0.250, 0.500, 0.750, 1.00, 2.50, 5.00, 7.50, 10.0, 15.0, 25.0, 30.0, 35.0, 40.0, 50.0, 60.0, 70.0, 80.0, 90.0 and 100 amps. Other ratings available, see Ordering Scheme.
Standard Voltage Coils DC - 6V, 12V; AC - 120V; other ratings available, see Ordering
Scheme.
Auxiliary Switch Rating SPDT; 10.1 amps-250VAC, DC Aux.
Switch 1.0A, 65 VDC. 0.5A, 80VDC,1/4 HP, 125VAC,VDE & TUV
1.0 125 VAC.
Insulation Resistance Minimum of 100 Megohms at 500 VDC.
Dielectric Strength UL, CSA: 1960 V 50/60 Hz for one
minute between all electrically isolated terminals. C-Series Circuit
Breakers comply with the 8mm spacing and 3750V 50/60 Hz
dielectric requirements from hazardous voltage to operator accessible surfaces, between adjacent poles and from main circuits to auxiliary circuits per Publications EN 60950 and
VDE 0805.
Resistance, Impedance Values from Line to Load Terminal based on Series Trip Circuit Breaker.
Mechanical
Endurance 10,000 ON-OFF operations @ 6 per
minute; with rated current & voltage.
Trip Free All C-Series circuit breakers will trip
on overload, even when actuator is
forcibly held in the ON position.
Trip Indication The operating actuator moves positively to the OFF position when an overload causes the breaker to trip. With mid-trip, handle moves to the mid position on electrical trip of the circuit breaker. With mid trip handle with alarm switch, handle moves to the mid position and the alarm switch actuates when the
circuit breaker is electrically tripped.
Physical
Number of Poles Internal Circuit Config. Weight Standard Colors 1-6 poles ≤ 50A; 1-4 poles @ 5170A; 1-2 poles 71-100A. UL489
Handle: 1 pole ≤ 100A, 2 pole ≤
50A; Rocker: 1 pole ≤ 100A.
Series (with or without auxiliary
switch, mid trip & mid trip with alarm switch) Shunt & Relay with current or voltage trip coils, Dual Coil, Switch Only (with or without aux. switch). UL489: Series (with or without auxiliary switch, mid-trip & midtrip with alarm switch).
Approx.112 grams/pole ( 3.95 oz).
Housing: Black
RESISTANCE, IMPEDANCE VALUES
from Line to Load Terminals
(Values Based on Series Trip Circuit Breaker )
1000
CURRENT
TOLERANCE
(AMPS)
(%)
0.10 - 5.0
5.1 - 20.0
15
25
20.1 - 50.0
35
100
10
O
H
M
S
1
60 Hz 1/2 Cycle
Inrush Pulse Tolerance
0.1
Multiple of
Rated Current
Ir
0.01
0.001
0.01
0.1
1
10
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
25x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
12x
100
t
AMPERE RATING
4.165
8.33
16.67
Pulse Tolerance Curves
CURRENT
(AMPS)
TOLERANCE
(%)
0.100 - 5.0
15%
60 Hz5.1
1/2- 20.0
Cycle
20.1 -Tolerance
100
Inrush Pulse
25%
35%
Ir
FIGURE
Time Delay
Curves 1
Multiple of
Rated Current
Multiple of
Rated Current
Ir
42, 44 & 46
(50 Amps Max.)
25x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
12x
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
22x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
10x
t
t
4.165
Ir
Multiple of
Rated Current
50 Hz 1/2 Cycle
Inrush Pulse Tolerance
8.33
5.0
10.0
16.67
50 Hz 1/2 Cycle
Inrush Pulse Tolerance
Time Delay Curves
42, 44 & 46
(50 Amps Max.)
22x
Time Delay Curves
22, 24 (100 Amps Max.)
26 (70 Amps Max.)
10x
20.0
Time in
Milliseconds
Environmental
Designed and tested in accordance with requirements of
specification MIL-PRF-55629 & MIL-STD-202 as follows:
Shock Withstands 100 Gs, 6ms sawtooth
while carrying rated current per
Method 213, Test Condition “I”.
Instantaneous and ultrashort curves
tested @ 90% of rated current.
Vibration Withstands 0.060” excursion from 10-55 Hz & 10 Gs 55-500 Hz, @ rated current per Method 204C, Test Cond. A. Instantaneous & ultrashort curves tested @ 90% of rated current.
Moisture Resistance Method 106D, i.e., ten 24-hour
cycles @ +25°C to +65°C,
80-98% RH.
Salt Spray Method 101, Condition A (90-95%
RH @ 5% NaCl Solution, 96 hrs).
Thermal Shock Method 107D, Condition A (five cycles @ -55°C to +25°C to +85°C to +25°C).
Operating Temperature -40°C to +85°C
t
5.0
10.0
20.0
*Manufacturer reserves the right to change product specification without prior notice.
Time in
Milliseconds
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - General Specifications | 3
Electrical Tables
Table A: Lists UL Recognized & CSA Accepted configurations and performance capabilities as a Component Supplementary
Protector
C-SERIES TABLE A: COMPONENT SUPPLEMENTARY PROTECTORS
VOLTAGE
CIRCUIT
CONFIGURATION
SERIES
CURRENT RATING
FREQUENCY
PHASE
FULL LOAD
AMPS
32
DC
---
0.02 - 100
---
---
48
DC
---
110 - 150
---
---
65
DC
---
0.02 - 70
---
80
DC
---
80
DC
---
125
DC
125 / 250
250
NOTES
UL
CSA
5000
TC1, OL1, U2
TC1, OL1, U2
5000
TC1, OL1, U2
TC1, OL1, U2
---
5000
TC1,2, OL1,U1
TC1,2, OL1,U1
---
71 -100
---
5000
TC1,2, OL0,U1
TC1,2, OL0,U1
0.02 - 70
---
---
7500
TC1,2, OL1,U1
TC1,2, OL1,U1
---
71 -100
---
7500
TC1,2, OL0,U1
TC1,2, OL0,U1
0.02 - 70
---
---
10,000
TC1,2, OL1,U1
TC1,2, OL1,U1
Must Have Agency Code "L"
---
71 -100
---
10,000
TC1,2, OL0,U1
TC1,2, OL0,U1
Must Have Agency Code "L"
---
0.02 - 50
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
DC
---
0.02 - 50
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
Must Have Agency Code "L"
DC
---
0.02 - 50
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
Must Have Agency Code "L". 2 Pole Break Required for 250 Volts
0.02 - 100
---
---
3000
TC1, OL1, U2
TC1, OL1, U2
Per Pole Rating
0.02 - 100
---
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
Must Have Agency Code "L"
Must Have Agency Code "L"
50 / 60
1
150
DC
---
---
80 - 100
---
5000
TC1, OL0, U3
---
Must Have Agency Code "L"
150
DC
---
---
101 - 175
---
5000
TC1, OL0, U3
---
Must Have Agency Code "L" Parallel Pole
0.02 - 100
---
---
3500
TC1, OL1, U2
TC1, OL1, U2
125 / 250
50 / 60
1
0.02 - 50
---
---
3000
TC1,2,OL1,U1
TC1,2,OL1,U1
51 - 100
---
---
1000
TC1,2,OL1,U1
TC1,2,OL1,U1
2 or 3 poles breaking single phase
0.02 - 100
---
---
5000
TC1,2,OL1,U2
TC1,2,OL1,U2
2 or 3 poles breaking single phase, "L" Agency Code
0.02 - 50
---
---
3500
TC1, OL1, U2
TC1, OL1, U2
Per Pole Rating
0.02 - 100
---
---
5000
TC1,2,OL1,U1
TC1,2,OL1,U1
Must Have Agency Code "L"
51 - 70
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
---
0.02 - 100
---
3000
TC1, OL0, U2
TC1, OL0, U2
0.02 - 70
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
3 poles breaking 3 phase
---
0.02 - 90
---
5000
TC1,2,OL0,U1
TC1,2,OL0,U1
Must Have Agency Code "L"
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
0.02 - 30
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
---
31 - 50
5000
---
TC1,2,OL0,C1
TC1,2,OL0,C1
50 / 60
3
277
50 / 60
1
480 / 277
50 / 60
3
480
50 / 60
1
0.02 - 30
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
---
31 - 50
5000
---
TC1,2,OL0,C1
TC1,2,OL0,C1
TC1,2, OL1,U1
2 or 3 poles breaking single phase
3 poles breaking 3 phase
2 poles breaking 1 phase
80
DC
---
0.02 - 50
---
---
7500
TC1,2, OL1,U1
125
50 / 60
1
0.02 - 50
---
---
3000
TC1, OL1, U2
TC1, OL1, U2
Per Pole Rating
125 / 250
50 / 60
1
0.02 - 50
---
---
3500
TC1, OL1, U2
TC1, OL1, U2
2 or 3 poles breaking single phase
0.02 - 50
---
---
3000
TC1,2,OL1,U1
TC1,2,OL1,U1
2 or 3 poles breaking single phase
0.02 - 50
---
---
3500
TC1, OL1, U2
TC1, OL1, U2
250
50 / 60
0.02 - 50
---
---
3000
TC1, OL0, U2
TC1, OL0, U2
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
DUAL COIL
SWITCH ONLY
APPLICATION CODES
125
250
RELAY
UL/CSA
WITH BACKUP WITHOUT BACKUP
GENERAL
PURPOSE AMPS
FUSE
FUSE 1
MAX.
RATING
1
SHUNT
SHORT CIRCUIT CAPACITY (AMPS)
1
3
277
50 / 60
1
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
80
DC
---
0.02 - 50
---
---
7500
TC1,2, OL1,U1
TC1,2, OL1,U1
Per Pole Rating
3 poles breaking 3 phase
277
50 / 60
1
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
250
50 / 60
3
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
3 poles breaking 3 phase
480 / 277
50 / 60
3
0.02 - 30
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
3 poles breaking 3 phase
TC1,2,OL0,C1
480
50 / 60
1
---
31 - 50
5000
---
TC1,2,OL0,C1
0.02 - 30
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
---
31 - 50
5000
---
TC1,2,OL0,C1
TC1,2,OL0,C1
TC1,2, OL1,U1
80
DC
---
0.02 - 50
---
---
7500
TC1,2, OL1,U1
277
50 / 60
1
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
250
50 / 60
3
0.02 - 50
---
5000
---
TC1,2,OL1,C1
TC1,2,OL1,C1
65
DC
---
0.02 - 70
---
---
---
---
---
80
DC
---
125
50 / 60
125 / 250
50 / 60
250
50 / 60
277
50 / 60
480 / 277
50 / 60
---
71 -100
---
---
---
---
0.02 - 70
---
---
---
---
---
---
71 -100
---
---
---
---
1
0.02 - 100
---
---
---
---
---
1
0.02 - 100
---
---
---
---
---
1
0.02 - 100
---
---
---
---
---
3
0.02 - 70
---
---
---
---
---
1
0.02 - 50
---
---
---
---
---
0.02 - 30
---
---
---
---
---
---
31 - 50
---
---
---
---
3
2 poles breaking 1 phase
3 poles breaking 3 phase
2 or 3 poles breaking single phase
3 poles breaking 3 phase
Notes:
1.
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 125A for 50 Amp or less
rating and not to exceed 175 for 51 through 100 Amp rating
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
4 | C-Series Circuit Breaker - General Specifications
Electrical Tables
Table B: Lists UL Recognized and CSA Accepted configurations and performance capabilities as a Manual Motor Controller.
RELAY
Notes:
1
UL recognized and CSA Accepted at 480V refers to 3 & 4 pole versions used in a 3Ø, wye connected circuit or 2-pole version connected with 2 poles breaking. 1Ø and backed up with series fusing as stated above in note 1.
*
Series, Shunt and Relay Trip - Voltage Coil Construction not current coils
Table C: Lists UL Recognized, CSA Accepted, VDE and TUV Certified configurations and performance capabilities as a
Component Supplementary Protector.
Notes:
1.
General Purpose ratings for UL/CSA only.
2.
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 125A for 50 Amp or less
rating and not to exceed 175 for 51 through 100 Amp rating.
Table D: Lists UL Listed (489), CSA Certified (C22.2 No. 5.1-M) configuration and performance capabilities as a Molded Case
Circuit Breaker.
C SERIES TABLE D : UL489 LISTED BRANCH CIRCUIT BREAKERS
CIRCUIT
CONFIGURATION
SERIES
DUAL COIL
INTERRUPTING
CAPACITY
(AMPS)
WITHOUT
FULL LOAD
BACKUP FUSE
AMPS
CURRENT
RATING
VOLTAGE
CONSTRUCTION NOTES
MAX.
RATING
FREQUENCY
PHASE
80
DC
---
0.10 - 100
125
DC
---
0.10 - 100
5,000
1 - 3 Poles
125 / 250
DC
---
0.10 - 50
5,000
1 or 2 Poles (2 Poles Required for 250 Volts)
120
50 / 60
1
0.10 - 50
10,000
1 - 3 Poles
51 - 70
5,000
1 - 3 Poles
0.10 - 50
5,000
2 or 3 Poles. 1 Pole of a 3 Pole Unit is Neutral
50,000 1
Limited to 2 Poles Max from 71 - 100 Amps.
10,000
Limited to 2 Poles Max from 71 - 100 Amps.
120 / 240
50 / 60
1
0.10 - 50
10000 1
2 or 3 Poles. 1 Pole of a 3 Pole Unit is Neutral
240
50 / 60
1
0.10 - 30
5,000
1Pole
240
50 / 60
1
0.10 - 20
5,000
2 Pole
277
50 / 60
1
0.10 - 20
10,000
1Pole
120
50 / 60
1
0.10 - 30
10,000
---
Notes from Table D:
1.
Special catalog number required. Consult factory.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - General Specifications | 5
Electrical Tables
Table E: Lists UL Recognized, CSA Accepted configurations and performance capabilities as Protectors, Supplementary for
Marine Electrical and Fuel Systems (Guide PEQZ2, File E75596). Ignition Protected per UL 1500. UL Classified Small Craft
Electrical Devices, Marine in accordance with ISO 8846 (Guide UZMK, File MQ1515) as Marine Supplementary Protectors.
Table F: Lists UL Listed configurations and performance capabilities as Circuit Breakers for use in Communications Equipment
(Guide DITT, File E189195), under UL489A.
Agency Certifications
UL Recognized
UL Standard 1077
Component Recognition Program as Protectors Supplementary (Guide CCN/QVNU2, File E75596)
CSA Accepted
Component Supplementary Protector under Class 3215 30, FIle 047848 0 000 CSA Standard C22.2 No. 235
UL Standard 508
Switches, Industrial Control
(Guide CCN/NRNT2, File E148683)
CSA Certified
UL Standard 1500
Protectors, Supplementary for Marine Electrical & Fuel Systems (Guide PEQZ2, File E75596) Ignition Protection
Circuit Breaker Model Case
(Class 1432 01, File 093910),
CSA Standard C22.2 No. 5.1 - M
TUV Certified
EN60934, under License No. R72040875
Circuit Breakers, Molded Case,
(Guide DIVQ, File E129899)
VDE Certified
EN60934, VDE 0642 under File
No. 10537
UL Listed
UL Standard 489
UL Standard 489A
Communications Equipment
(Guide CCN/DITT, File E189195)
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
6 | C-Series Circuit Breaker - Handle UL Recognized – Ordering Scheme
C A 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
10
5
Aux/Alarm
Switch
6
Frequency
& Delay
1 SERIES
C
9
Actuator
Color
C
10
Mounting
Bezel/Barrier
11
Agency
Approval
CODEAMPERES
Handle, one per pole
Handle, one per multipole unit
Mid-Trip Handle, one per pole
Mid-Trip Handle, one per pole & Alarm Switch
3 POLES 2
1
One
2
Two
1 2 1
8
Terminal
7 CURRENT RATING (AMPERES)
2 ACTUATOR 1
A
B
S
T
450
7
Current Rating
3
4
Three
Four
4 CIRCUIT 3
A 3 Switch Only (No Coil)
B
Series Trip (Current)
C
Series Trip (Voltage)
4
D
Shunt Trip (Current)
4
E
Shunt Trip (Voltage)
5
6
Five
Six
F 4 Relay Trip (Current)
G 4 Relay Trip (Voltage)
H 4,5 Dual Coil with Shunt Trip Voltage Coil
K 4,5 Dual Coil with Relay Trip Voltage Coil
0200.020
2350.350
4303.000
0250.025
2400.400
4353.500
0300.030
2450.450
4404.000
0350.035
2500.500
4454.500
0400.040
2550.550
4505.000
0450.045
2600.600
4555.500
0500.050
2650.650
4606.000
0550.055
2700.700
4656.500
0600.060
2750.750
4707.000
0650.065
2800.800
4757.500
0700.070
2850.850
4808.000
0750.075
2900.900
4858.500
0800.080
2950.950
4909.000
0850.085
4101.000
4959.500
0900.090
5121.250
610 10.000
0950.095
4151.500
71010.500
2100.100
517 1.750
611 11.000
2150.150
4202.000
71111.500
2200.200
5222.250
61212.000
2250.250
4252.500
71212.500
2300.300
5272.750
61313.000
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 960.000
670 970.000
680 980.000
685 985.000
690 990.000
695 995.000
810 9100.00
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
5 AUXILIARY / ALARM SWITCH
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
03 3 DC 50/60Hz, Switch Only
10 7 DC Instantaneous
11
DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 7 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
6
8
9
30
31
32
34
36
42 8
44 8
46 8
52 8
54 8
56
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units.
B: Handle location as viewed from front of breaker:
2 pole - left pole 3 pole - center pole 4 pole - two handles at center poles
5 pole - three handles at center poles
6 pole - four handles at center poles
S: Handle moves to mid-position only upon electrical trip of the breaker. Available with circuit codes B, C, D, E, F, G, H and K.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker. Available with circuit codes B & C.
2 Standard multipole units have all poles identical except when specifying auxiliary switch and/or mixed poles. 4 pole max with VDE. 5th pole available as Series Trip with Voltage Coil only.
3 Switch Only circuits, rated up to 50 amps and 6 poles, and only available with VDE Certification when tied to a protected pole (Circuit Code B, C, D or H.). For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
4 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes D, F, H & K available up to 50 amps maximum Current Rating.
5 Consult factory for available Dual Coil options, as special catalog number is
required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip
instantaneously and are rated for intermittent duty only.
6 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
7 Voltage coils not rated for continuous duty. Available only with delay codes 10 & 20.
8 Available with Circuit Codes B & D only, and up to 50 amps maximum.
9 Current Ratings 60 - 70 are available up to four poles maximum. Ratings 71 - 100 are available up to two poles maximum.
10 Terminal Code 1 available to 60 amps maximum.
11 Terminal Codes 2, 4, 5 and C available to 50 amps maximum.
12 Terminal Codes 3, 6 & 9 available to 100 amps maximum.
13 Terminal Code 7 available to 25 amps maximum.
14 Terminal Code A available to 100 amps maximum.
15 Terminal Codes 7, 9 & C are not VDE approved.
16 No marking available. Consult factory. VDE/TUV Approval requires dual
(I-O, ON-OFF) or I-O markings on all handles.
17 Single pole only.
18 VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 - 4 poles only and limited to AC Delays. “General Purpose amps” not rated for “full load amps” or to be used in applications with a motor.
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
8 TERMINAL 15
1 10 Stud 10-32
2 11 Screw 10-32
3 12 Stud 1/4-20
4 11 Stud M5 x 0.8
5 11 Screw M5 x 0.8
J12
J18
J24
J48
6 12
7 13,15
9 15
A 14
C 11,15
12 AC
18 AC
24 AC
48 AC
Stud M6
0.250 Double Click Connect
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 16
Actuator Color
I-O
ON-OFF
Dual
Legend Color
White
AB 1Black
Black
CD 2White
Red
FG 3White
Green
HJ 4White
Blue
KL 5White
Yellow
MN 6Black
Gray
PQ 7Black
Orange
RS 8Black
Black (short handle)17 TU 9
White
10 MOUNTING / BARRIERS
MOUNTING STYLE
BARRIERS Threaded Insert
1
6-32 x 0.195 inches no A
6-32 X 0.195 inches yes 18
C 6-32 X 0.195 inches yes 2
ISO M3 x 5mm no B
ISO M3 x 5mm yes D 18 ISO M3 x 5mm yes Front panel Snap-In, 1.00” [25.4mm] wide bezel
17
E
with Handleguard no VOLTAGE
< 300
< 300
≥ 300
< 300
< 300
≥ 300
< 300
11 AGENCY APPROVAL
C UL Recognized, CSA Accepted
D VDE Certified, UL Recognized, CSA Accepted
E
TUV Certified, UL Recognized, CSA Accepted
H UL489 Construction: VDE Certified, UL Recognized, CSA Accepted
I
UL Recognized STD 1077, UL Recognized 1500 (ignition protected), CSA Accepted
L
UL489 Construction: UL Recognized, CSA Accepted
R UL489 Construction: TUV Certified, UL Recognized, CSA Accepted
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - Handle UL489A Listed / Parallel Pole – Ordering Scheme | 7
C A 2
1
Series
2
Actuator
P 0
4
Circuit
3
Poles
D4
5
Aux/Alarm
Switch
6
Frequency
& Delay
820
7
Current Rating
3 2 1
8
Terminal
9
Actuator
Color
10
Mounting
8 TERMINAL 5
3
Stud 1/4-20
6
Stud M6
A
Plug-In Stud 3
1 SERIES
C
2 ACTUATOR
A Handle, one per pole
S Mid-Trip Handle, one per pole 1
T
Mid-Trip, one per pole & Alarm Switch 1
3 POLES 4
1
One
2
Two
3
Three
4 CIRCUIT
P Series Trip (parallel pole)
5 AUXILIARY / ALARM SWITCH
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
5
S.P.S.T., N.O., 0.110 Q.C Term. (Gold Contacts)
6
7
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C Term. (Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
9 ACTUATOR COLOR 2
LEGEND
ON-OFF White B
Black D
Red G
Green J
Blue L
Yellow N
Gray Q
Orange S
Dual Legend Color
1Black
2 White
3White
4White
5White
6Black
7Black
8Black
10 MOUNTING
Threaded Insert
1
6-32 x 0.195 inches
2
ISO M3 x 5mm
11 MAXIMUM APPLICATION RATING
M
80 DC
6 FREQUENCY & DELAY
D1 DC Ultra Short
D2 DC Short
D4 DC Medium
D6 DC Long
12 AGENCY APPROVAL
A
Without Approval
K
UL489A Listed, VDE Certified
T
UL489A Listed
7
UL489A Listed, TUV Certified
7 CURRENT RATING (AMPERES) 4
CODEAMPERES
810
811
812
912
100.00
110.00
120.00
125.00
M T
11
12
Max. App. Agency
Rating
Approval
813
814
815
816
130.00
140.00
150.00
160.00
817
917
818
819
170.00
175.00
180.00
190.00
820
922
825
200.00
225.00
250.00
Notes:
1 Handle moves to Mid-Position only upon electrical trip of C/B when Actuator S is specified. When Actuator Code T is specified, handle moves to Mid Position and Alarm Switch actuates only upon electrical trip of C/B. Code T is only available with Circuit Code N.
2 Standard Handle colors are White, Black, Red & Yellow.
3 Breakers with Terminal Codes 3 & 6 are supplied with bus bars connecting the Line and Load Terminals. For Terminal Code A, Line and Load Terminals must be connected to a copper bus bar having a minimum cross-section of 0.078 square inches. Terminal code A not available on the single pole unit.
4 Ratings for 101 to 125 amps are available in 1-pole size.
Ratings from 110 to 200 amps are available in 2-pole size.
For ratings from 225-250 amps, specify 3-pole size.
For ratings from 350-400 amps, specify 4-pole size.
5 1 pole only available with terminal codes 3 and 6.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
8 | C-Series Circuit Breaker - Rocker UL489A Listed / Parallel Pole – Ordering Scheme
C 1 2
1
Series
2
Actuator
P 0
4
Circuit
3
Poles
D4
5
Aux/Alarm
Switch
6
Frequency
& Delay
1 SERIES
C
2 ACTUATOR
C Curved Rocker, Two Color Visi, Indicate On, Vertical Legend
D Curved Rocker, Two Color Visi, Indicate On, Horizontal Legend
F
Curved Rocker, Two Color Visi, Indicate Off, Vertical Legend
G Curved Rocker, Two Color Visi, Indicate Off, Horizontal Legend
J
Curved Rocker, Single Color, Vertical Legend
K Curved Rocker, Single Color, Horizontal Legend
N Curved Rocker, Push To Reset, Two Color Visi, Vertical Legend
O Curved Rocker, Push To Reset, Two Color Visi, Horizontal Legend
1
Flat Rocker, Two Color Visi, Vertical Legend
2
Flat Rocker, Two Color Visi, Horizontal Legend
3
Flat Rocker, Single Color, Vertical Legend
4
Flat Rocker, Single Color, Horizontal Legend
5
Flat Rocker, Push To Reset, Two Color Visi, Vertical Legend
6
Flat Rocker, Push To Reset, Two Color Visi, Horizontal Legend
7
Flat Rocker, Push To Reset, Single Color, Vertical Legend
8
Flat Rocker, Push To Reset, Single Color, Horizontal Legend
3 POLES 2
1
One
2
Two
3
Three
4 CIRCUIT
P Series Trip (parallel pole)
5 AUXILIARY/ALARM SWITCH
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
5
S.P.S.T., N.O., 0.110 Q.C Term. (Gold Contacts)
6
7
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.110 Q.C Term. (Gold Contacts)
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
820
7
Current Rating
3 2 A
8
Terminal
9
Actuator
Color
10
Mounting
7 CURRENT RATING (AMPERES) 2
8 TERMINAL 3
3
Stud 1/4-20
6
Stud M6
A
Plug-In Stud 1
9 ACTUATOR COLOR
LEGEND
ON-OFF White B
Black D
Red G
Green J
Blue L
Yellow N
Gray Q
Orange S
Dual Legend Color
1 Black
2 White
3 White
4 White
5 White
6 Black
7 Black
8 Black
10 MOUNTING
ROCKER / MOUNTING INSERT STYLE
A
Standard Rocker Bezel - 6-32 Inserts
B
Standard Rocker Bezel - M3 Inserts
C
Rocker Guard Bezel - 6-32 Inserts
D
Rocker Guard Bezel - M3 Inserts
E
Standard Bezel with recessed Off Side Flat Rocker - 6-32 Inserts
F
Standard Bezel with recessed Off Side Flat Rocker - M3 Inserts
G
Push to Reset Bezel - 6-32 Inserts
H
Push to Reset Bezel - M3 Inserts
11 MAXIMUM APPLICATION RATING
M
80 DC
12 AGENCY APPROVAL
A
Without Approval
T
UL489A Listed
7
UL489A Listed, TUV Certified
CODEAMPERES
100.00
110.00
120.00
125.00
813
814
815
816
130.00
140.00
150.00
160.00
11
12
Max. App. Agency
Rating
Approval
Notes:
1 Breakers with Terminal Codes 3 & 6 are supplied with bus bars connecting the Line and Load Terminals. For Terminal Code A, Line and Load Terminals must be connected to a copper bus bar having a minimum cross-section of 0.078 square inches. Terminal code A not available on the single pole unit.
2 Ratings for 101 to 125 amps are available in 1-pole size.
Ratings from 110 to 200 amps are available in 2-pole size.
For ratings from 225-250 amps, specify 3-pole size.
For ratings from 350-400 amps, specify 4-pole size.
3 1 pole only available with terminal codes 3 and 6.
6 FREQUENCY & DELAY
D1 DC Ultra Short
D2 DC Short
D4 DC Medium
D6 DC Long
810
811
812
912
M T
817
917
818
819
170.00
175.00
180.00
190.00
820
922
825
200.00
225.00
250.00
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - Handle UL489 Listed – Ordering Scheme | 9
C A 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
14
5
Aux/Alarm
Switch
6
Frequency
& Delay
1 SERIES
C
450
7
Current Rating
1 2 1
8
Terminal
9
Actuator
Color
10
Mounting/
Barriers
K G
11
Max. App.
Rating
12
Agency
Approval
7 CURRENT RATING (AMPERES)
CODEAMPERES
2 ACTUATOR 1
A
Handle, one per pole
B
Handle, one per multipole unit
S
Mid-Trip Handle, one per pole
T
Mid-Trip Handle, one per pole & Alarm Switch
3 POLES 2
1
One
2
Two
3
Three
4 CIRCUIT
B
Series Trip (Current)
5 AUXILIARY / ALARM SWITCH 3
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
11
DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
6
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
26
42 4
44 4
46 4
52 4
54 4
56 4
50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Actuator Code:
A: Handle tie pin spacer(s) and retainers provided assembled with multi-pole units.
B: Handle located, as viewed from front of breaker in left pole. 2 pole maximum.
S: Handle moves to mid-position only upon electrical trip of the breaker.
T: Handle moves to mid-position and alarm switch activates only upon electrical trip of the breaker.
2 Standard multipole units have all poles identical except when specifying auxiliary switch and/or mixed poles.
2 & 3 pole circuit breakers required for 120/240 VAC (Maximum application rating code C) applications, have all poles identical except when specifying auxiliary / alarm switch which is normally supplied in extreme right pole per figure B. Terminal barriers are required on all multipole breakers.
Third pole is for 120/240 VAC applications requiring neutral disconnect. The 3rd pole has the same construction as poles 1 & 2.
3 On multi-pole breakers, one auxiliary. switch is supplied, mounted in the extreme right pole.
VDE approval on auxiliary switch codes 2, 3 & 4 only.
Auxiliary / Alarm Switch with Independent Circuit ie: separate from breaker circuit, only available with circuit breakers rated 50 amp maximum at 80 VDC, 125 VDC,
and 120 VAC. Auxiliary / Alarm Switch with Dependent Circuit ie: same as circuit breaker, is supplied from factory with common terminal of auxiliary / alarm switch connected to line terminal on 120/240 and 240 VAC ratings. Circuit breakers rated 120 VAC 50 amp maximum can be supplied with Auxiliary/Alarm switch common terminal connected to breaker line terminal. Consult factory for special catalog number.
4 Available up to 50 amps maximum.
5 Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
6 Terminal Codes 9 & C are not VDE approved.
7 Terminal Code 1 available to 60 amps maximum.
8 Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
9 Terminal Codes 3, 6 & 9 available to 100 amps maximum.
10 Terminal Code A available to 100 amps maximum.
11 VDE and TUV approvals require Dual (I-O, ON-OFF) markings on all handles.
12 Barriers supplied on multi-pole units only.
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
4252.500
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
8 TERMINAL 6
1 7 Stud 10-32
2 8 Screw 10-32
3 9 Stud 1/4-20
4 8 Stud M5 x 0.8
5 8 Screw M5 x 0.8
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
6 9
9 9
A 10
C 8
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
66060.000
67070.000
68080.000
68585.000
69090.000
69595.000
810100.00
Stud M6
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 11
Actuator Color
ON-OFF Dual
Legend Color
White
B1Black
Black
D2White
Red
G3White
Green
J4White
Blue
L5White
Yellow
N6Black
Gray
Q7Black
Orange
S8Black
10 MOUNTING / BARRIERS
MOUNTING STYLE
Threaded Insert
1
6-32 x 0.195 inches
2
ISO M3 x 5mm
BARRIERS 12
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC 2
D
240 AC
K
120 AC
F
277 AC
M
80 DC
12 AGENCY APPROVAL 11
A
without approvals
F
UL489 Listed, CSA Certified & VDE Certified
G
UL489 Listed & CSA Certified
J
UL489 Listed, CSA Certified & TUV Certified
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
10 | C-Series Circuit Breaker - Sealed Toggle UL Recognized – Ordering Scheme
C M 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
10
6
Frequency
& Delay
1 0 1
8
Terminal
9
Legend
Plate
C
10
Mounting
Bezel/Barrier
11
Agency
Approval
7 CURRENT RATING (AMPERES) 9
1 SERIES
C
CODEAMPERES
2 ACTUATOR 1
M
450
7
Current Rating
Sealed Toggle, one per pole
3 POLES
1
One
2
Two
3
Three
4 CIRCUIT
A 2 Switch Only (no coil)
B
Series Trip (current)
C
Series Trip (voltage)
D 3 Shunt Trip (current)
E 3 Shunt Trip (voltage)
F 3
G 3
H 3,4
K 3,4
Relay Trip (current)
Relay Trip (voltage)
Dual Coil with Shunt Trip
Voltage Coil
Dual Coil with Relay Trip
Voltage Coil
5 AUXILIARY / ALARM SWITCH
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
6 FREQUENCY & DELAY
03 2 DC 50/60Hz, Switch Only
10 6 DC Instantaneous
11
DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 6 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
30
31
32
34
36
42 7
44 7
46 7
52 7
54 7
56
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Actuator Code M: Handle location as viewed from front of breaker:
2 pole - right pole
3 pole - center pole
2 Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE. For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
3 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only.
4 Consult factory for available Dual Coil options, as special catalog number is
required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip instantaneously and are rated for intermittent duty only.
5 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
6 Voltage coils not rated for continuous duty. Available only with delay codes 10 & 20.
7 Available with Circuit Codes B & D only, and up to 50 amps maximum.
8 Consult factory for current ratings 71-100, in three pole units, available as special
catalog number only.
9 Terminal Code 1 available to 60 amps maximum.
10 Terminal Codes 2, 4, 5 and C available to 50 amps maximum.
11 Terminal Codes 3, 6 & 9 available to 100 amps maximum.
12 Terminal Code 7 available to 25 amps maximum.
13 Terminal Code A available to 100 amps maximum.
0200.020
2350.350
4303.000
0250.025
2400.400
4353.500
0300.030
2450.450
4404.000
0350.035
2500.500
4454.500
0400.040
2550.550
4505.000
0450.045
2600.600
4555.500
0500.050
2650.650
4606.000
0550.055
2700.700
4656.500
0600.060
2750.750
4707.000
0650.065
2800.800
4757.500
0700.070
2850.850
4808.000
0750.075
2900.900
4858.500
0800.080
2950.950
4909.000
0850.085
4101.000
4959.500
0900.090
5121.250
610 10.000
0950.095
4151.500
71010.500
2100.100
517 1.750
611 11.000
2150.150
4202.000
71111.500
2200.200
5222.250
61212.000
2250.250
4252.500
71212.500
2300.300
5272.750
61313.000
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 960.000
670 970.000
680 980.000
685 985.000
690 990.000
695 995.000
810 9100.00
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
8 TERMINAL
1 9
Stud 10-32
2 10 Screw 10-32
11
3 Stud 1/4-20
4 10 Stud M5 x 0.8
5 10 Screw M5 x 0.8
J12
J18
J24
J48
6 11
7 12
9 11
A 13
C 10
12 AC
18 AC
24 AC
48 AC
Stud M6
0.250 Double Click Connect
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 LEGEND PLATE
0
No Legend
10 MOUNTING / BARRIERS
MOUNTING STYLE 1
Standard Hex Nut A
Standard Hex Nut (multi-pole units only) BARRIERS
no
yes
11 AGENCY APPROVAL
C
UL Recognized & CSA Accepted
I
UL Recognized & CSA Accepted, UL1500 ignition protection
L
UL Recognized & CSA Accepted with listed construction
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - Rocker UL Recognized – Ordering Scheme | 11
C C 3
1
Series
2
Actuator
14
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
450
6
Frequency
& Delay
1 SERIES
C
9
Actuator
Color
10
Mounting/
Barriers
D
11
Agency
Approval
CODEAMPERES
2
Two
3
4 CIRCUIT
F 4
A 3 Switch Only (No Coil)
G 4
B
Series Trip (Current)
H 4,5
C
Series Trip (Voltage)
4
D
Shunt Trip (Current)
K 4,5
E 4 Shunt Trip (Voltage)
5 AUXILIARY / ALARM SWITCH 6
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
03 DC 50/60Hz, Switch Only
10 7 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 7 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
0200.020
2350.350
4303.000
0250.025
2400.400
4353.500
0300.030
2450.450
4404.000
0350.035
2500.500
4454.500
0400.040
2550.550
4505.000
0450.045
2600.600
4555.500
0500.050
2650.650
4606.000
0550.055
2700.700
4656.500
0600.060
2750.750
4707.000
0650.065
2800.800
4757.500
0700.070
2850.850
4808.000
0750.075
2900.900
4858.500
0800.080
2950.950
4909.000
0850.085
4101.000
4959.500
0900.090
5121.250
610 10.000
0950.095
4151.500
71010.500
2100.100
517 1.750
611 11.000
2150.150
4202.000
71111.500
2200.200
5222.250
61212.000
2250.250
4252.500
71212.500
2300.300
5272.750
61313.000
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 960.000
670 970.000
680 980.000
685 985.000
690 990.000
695 995.000
810 9100.00
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
3 POLES 2
One
8
Terminal
7 CURRENT RATING (AMPERES)
2 ACTUATOR 1
Two Color Visi-Rocker
C
Indicate ON, vertical legend
D
Indicate ON, horizontal legend
E
Indicate ON, no legend
F
Indicate OFF, vertical legend
G
Indicate OFF, horizontal legend
H
Indicate OFF, no legend
Push-To-Reset, Visi-Rocker
N
Indicate OFF,vertical legend
O
Indicate OFF,horizontal legend
P
Indicate OFF,no legend
Single color
J
Vertical legend
K
Horizontal legend
L
No legend
Push-To-Reset, Single color
R
Vertical legend
U
Horizontal legend
V
No legend
1
1 2 1
7
Current Rating
6
8
9
Three
Relay Trip (Current)
Relay Trip (Voltage)
Dual Coil with Shunt Trip
Voltage Coil
Dual Coil with Relay Trip
Voltage Coil
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
30
31
32
34
36
42 8
44 8
46 8
52 8
54 8
56 8
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Push-To-Reset actuators have OFF portion of rocker shrouded.
2 Multi-pole breakers have all poles identical except when specifying Auxiliary switch and/or mixed poles, and have one rocker per breaker. Rocker location as viewed from front panel: 2 pole – left pole; 3 pole – center pole.
3 Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE Certification when tied to a protected pole (Circuit Code B, C, D or H.), For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
4 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes D,F,H & K available up to 50 amps maximum Current Rating.
5 Consult factory for available Dual Coil options, as special catalog number is required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip instantaneously and are rated for intermittent duty only.
6 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole. Auxiliary switch codes 2, 3 & 4 are VDE approved.
7 Voltage coils not rated for continuous duty. Available only with delay codes 10 & 20.
8 Available with Circuit Codes B & D only, and up to 50 amps maximum.
9 Current Ratings 60-70 are available up to four poles maximum. Ratings 71-100 are available up to two poles maximum.
10 Terminal Code 1 available to 60 amps maximum.
11 Terminal Codes 2,4,5 & C available to 50 amps maximum.
12 Terminal Codes 3,6 & 9 available to 100 amps maximum.
13 Terminal Code 7 available to 25 amps maximum.
14 Terminal Code A available to 100 amps maximum.
15 Terminal Codes 7, 9 & C are not VDE approved.
16 Color shown is visi and legend with remainder of rocker black
17 Legend on Push-to-reset bezel/shroud is white when single color rocker is ordered. Dual = ON-OFF/I-O legend with actuator codes C - G, and J, K, N, O, R, & U. None = no legend with actuator codes H, L, P, V. Rockerguard available with actuator codes C - L. Push-to-reset available with actuator codes N, O, P, R, U, V.
18 VDE/TUV approval requires Dual (I-O, ON-OFF) or I-O markings on rocker.
19 VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 - 4 poles only and limited to AC Delays. “General Purpose amps” not rated for “full load amps” or to be used in applications with a motor.
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
8 TERMINAL
1 10 Stud 10-32
2 11 Screw 10-32
3 12 Stud 1/4-20
4 11 Stud M5 x 0.8
5 11 Screw M5 x 0.8
J12
J18
J24
J48
12 AC
18 AC
24 AC
48 AC
6 12 Stud M6
7 13 0.250 Double Quick Connect
9
7/16” Clip Terminal
A 14 Plug-In Stud
C
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 16,17,18
Actuator or
Visi-Color Marking:
Marking Color:
Single Color
Color: I-O ON-OFF Dual/None Rocker/Handle Visi-Rocker
White A B
1
Black White
Black C D
2
White n/a
Red F G
3 White Red
Green H J
4 White Green
Blue K L
5 White Blue
Yellow M N 6
Black Yellow
Gray P Q
7
Black Gray
Orange R S
8
Black Orange
10 MOUNTING / BARRIERS 1
STANDARD ROCKER BEZEL
1
6-32 x 0.195 inches
2
6-32 x 0.195 inches
3 19 6-32 x 0.195 inches
4
ISO M3 x 5mm
5
ISO M3 x 5mm
6 19 ISO M3 x 5mm
ROCKERGUARD BEZEL
A
6-32 x 0.195 inches
C
6-32 x 0.195 inches
E 19 6-32 x 0.195 inches
G
ISO M3 x 5mm
J
ISO M3 x 5mm
L 19 ISO M3 x 5mm
PUSH-TO-RESET BEZEL
B
6-32 x 0.195 inches
D
6-32 x 0.195 inches
19
F
6-32 x 0.195 inches
H
ISO M3 x 5mm
J
ISO M3 x 5mm
19
M
ISO M3 x 5mm
BARRIERSVOLTAGE
no
<300
yes
<300
yes
≥300
no
<300
yes
<300
yes
≥300
no
yes
yes
no
yes
yes
<300
<300
≥300
<300
<300
≥300
no
yes
yes
no
yes
yes
<300
<300
≥300
<300
<300
≥300
11 AGENCY APPROVAL
C
UL Recognized & CSA Accepted
D VDE Certified, UL Recognized & CSA Accepted
E TUV Certified, UL Recognized & CSA Accepted
H UL489 Construction: VDE Certified, UL Recognized & CSA Accepted
I
UL Recognized STD 1077, UL Recognized 1500 (ignition protected),
& CSA Accepted
L UL489 Construction: UL Recognized & CSA Accepted
R
UL489 Construction: TUV Certified, UL Recognized & CSA Accepted
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
12 | C-Series Circuit Breaker - Rocker UL Listed – Ordering Scheme
C C 3
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
14
5
Aux/Alarm
Switch
6
Frequency
& Delay
450
7
Current Rating
Two Color Visi-Rocker
C Indicate ON, vertical legend
D Indicate ON, horizontal legend
F Indicate OFF, vertical legend
G Indicate OFF, horizontal legend
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
Single color
J Vertical legend
K Horizontal legend
ROCKER STYLE DESCRIPTIONS
INDICATE "ON"
VERTICAL
STYLE
K G
10
Mounting/
Barriers
11
Max. App.
Rating
12
Agency
Approval
CODEAMPERES
2 ACTUATOR 1
INDICATE "OFF"
SINGLE COLOR
CODE "F"
CODE "J"
CODE "C"
INDICATE
COLOR
LOCATION
HORIZONTAL
STYLE
9
Actuator
Color
7 CURRENT RATING (AMPERES) 4
1 SERIES
C
LINE
1 2 A
8
Terminal
LINE
CODE "G"
CODE "K"
LINE
3 POLES 1
1
One
2
8 TERMINAL
1 5 Stud 10-32
2 6 Screw 10-32 with saddle
& washer clamps
3 7 Stud 1/4-20
4 6 Stud M5 x 0.8
5 6 Screw M5 x 0.8 with saddle
& washer clamps
LINE
Two
3
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 60.000
670 70.000
680 80.000
685 85.000
690 90.000
695 95.000
810 100.00
5 AUXILIARY / ALARM SWITCH 2
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
42 8
44 8
46 8
52 8
54 8
56
6 7
9 7,8
A 7,8
C 6,8
Stud M6
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
Three
4 CIRCUIT
B
Series Trip (current)
6 FREQUENCY & DELAY
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
LINE
CODE "D"
LINE
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
4252.500
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Multi-pole breakers have all breakers identical except when specifying Auxiliary switch and/or mixed poles, and have one rocker per breaker.
2 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole.
3 Available up to 50 amps maximum.
4 Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
5 Terminal Code 1 available to 60 amps maximum.
6 Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
7 Terminal Codes 3, 6, 9 & A available to 100 amps maximum.
8 Terminal Codes 9 & C are not VDE approved.
9 Color shown is visi and legend with remainder of rocker black
10 Dual = ON-OFF/I-O legend on actuator.
11 VDE and TUV approval requires Dual (I-O, ON-OFF) markings on rocker.
12 Rockerguard available with all actuator codes.
13 Barriers supplied on multi-pole units only.
14 2 & 3 pole circuit breakers required for 120/240 AC rating.
9 ACTUATOR COLOR & LEGEND 11
Actuator or
Visi-Color Marking:
Marking Color:
Single Color
10
Color: ON-OFF Dual Rocker/Handle White B
1
Black Black D
2
White Red G
3
White Green J
4
White Blue L
5
White Yellow N
6
Black Gray Q7 Black Orange S
8
Black 10 MOUNTING / BARRIERS 12
Standard Rocker Bezel Threaded Insert, 2 per pole
A
6-32 X 0.195 inches C
ISO M3 x 5mm Rockerguard Bezel
Threaded Insert, 2 per pole
B
6-32 x 0.195 inches D
ISO M3 x 5mm BARRIERS 13
yes
yes
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC 14
D
240 AC
F
277 AC
K
120 AC
M
80 DC
12 AGENCY APPROVAL
A
without approvals
F
UL 489 Listed, CSA Certified, & VDE Certified
G
UL 489 Listed & CSA Certified
J
UL489 Listed, CSA Certified & TUV Certified
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Visi-Rocker
White
n/a
Red
Green
Blue
Yellow
Gray
Orange
C-Series Circuit Breaker - Flat Rocker UL Recognized – Ordering Scheme | 13
C 1 2
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
5
Aux/Alarm
Switch
10
450
6
Frequency
& Delay
7
Current Rating
9
Actuator
Color
10
Mounting/
Barriers
E
11
Agency
Approval
7 CURRENT RATING (AMPERES) 9
1 SERIES
C
CODEAMPERES
2 ACTUATOR 1
Two Color Visi-Rocker
1 Indicate OFF,
vertical legend
2 Indicate OFF,
horizontal legend
Single color
3 Vertical legend
4 Horizontal legend
Push-To-Reset, Visi-Rocker
5 Indicate OFF,
vertical legend
6 Indicate OFF,
horizontal legend
Push-To-Reset , Single color
7 Vertical legend
8 Horizontal legend
3 POLES 2
1
One
1 2 1
8
Terminal
2
Two
3
4 CIRCUIT
F 4
A 3 Switch Only (No Coil)
G 4
B
Series Trip (Current)
H 4,5
C
Series Trip (Voltage)
D 4 Shunt Trip (Current)
K 4,5
E 4 Shunt Trip (Voltage)
5 AUXILIARY / ALARM SWITCH 6
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
03 DC 50/60Hz, Switch Only
10 7 DC Instantaneous
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
20 7 50/60Hz Instantaneous
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
6
8
9
Relay Trip (Current)
Relay Trip (Voltage)
Dual Coil with Shunt Trip
Voltage Coil
Dual Coil with Relay Trip
Voltage Coil
30
31
32
34
36
42 8
44 8
46 8
52 8
54 8
56 8
DC 50/60Hz Instantaneous
DC 50/60Hz Ultra Short
DC 50/60Hz Short
DC 50/60Hz Medium
DC 50/60Hz Long
50/60Hz Short, Hi-Inrush
50/60Hz Medium, Hi-Inrush
50/60Hz Long, Hi-Inrush
DC Short, Hi-Inrush
DC Medium, Hi-Inrush
DC Long, Hi-Inrush
Notes:
1 Push-to-reset actuators have OFF portion of rocker shrouded.
2 Multi-pole breakers have all poles identical except when specifying Auxiliary switch and/or mixed poles, and have one rocker per breaker. Rocker location as viewed from front panel: 2 pole – left pole; 3 pole – center pole.
3 Switch Only circuits, rated up to 50 amps and 3 poles, and only available with VDE Certification when tied to a protected pole (Circuit Code B, C, D or H.). For .02 to 30 amps, select Current Code 630. For 35 - 50 amps, select Current Code 650. For 55-70 amps, select Current Code 670. For 75-100 amps, select Current Code 810.
4 Circuit Codes D,E,F,G,H & K available with Terminal Codes 1,2,4 & 5 only. Circuit Codes D,F,H & K available up to 50 amps maximum Current Rating.
5 Consult factory for available Dual Coil options, as special catalog number is required. Dual Coil Voltage Coils with Shunt Trip Construction trip instantaneously on line voltage. Dual Coil Voltage Coils require 30VA minimum power to trip instantaneously and are rated for intermittent duty only.
6 Auxiliary Switch available with Series Trip and Switch Only circuits. On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme right pole. Auxilary switch codes 2, 3 & 4 are VDE approved.
7 Voltage coils not rated for continuous duty. Available only with delay codes 10 and 20.
8 Available with Circuit Codes B & D only, and up to 50 amps maximum.
9 Current ratings 60-70 are available up to four poles maximum. Current ratings 71 - 100 are available up to two poles maximum.
10 Terminal Code 1 available to 60 amps maximum.
11 Terminal Codes 2,4,5 & C available to 50 amps maximum.
12 Terminal Codes 3,6 & 9 available to 100 amps maximum.
13 Terminal Code 7 available to 25 amps maximum.
14 Terminal Code A available to 100 amps maximum.
15 Terminal Codes 7, 9 & C are not VDE approved.
16 Color shown is visi & legend with remainder of rocker black. Dual = ON-OFF/I-O legend.
17 Legend on Push-to-reset bezel/shroud is white with single color actuator codes 7 & 8. Legend on Push-to-reset bezel/shroud matches visi-color of rocker with actuator codes 5 & 6.
18 VDE/TUV approval requires Dual (I-O, ON-OFF) or I-O markings on rocker.
19 VDE/TUV: 30 amps max.; UL/CSA: 50 amps max.; Available in 2 & 3 poles only and limited to AC Delays. “General Purpose amps” not rated for “full load amps” or to be used in applications with a motor.
20 Recessed “OFF SIDE” available with actuator codes 1,2,3&4. Legends on rocker are available in ink stamping only.
61414.000
61515.000
61616.000
61717.000
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 960.000
670 970.000
680 980.000
685 985.000
690 990.000
695 995.000
810 9100.00
A06 6 DC
A12 12 DC
A18 18 DC
A24 24 DC
J65 65 AC
K20 120 AC
L40 240 AC
CODEAMPERES
Three
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
0200.020
2350.350
4303.000
0250.025
2400.400
4353.500
0300.030
2450.450
4404.000
0350.035
2500.500
4454.500
0400.040
2550.550
4505.000
0450.045
2600.600
4555.500
0500.050
2650.650
4606.000
0550.055
2700.700
4656.500
0600.060
2750.750
4707.000
0650.065
2800.800
4757.500
0700.070
2850.850
4808.000
0750.075
2900.900
4858.500
0800.080
2950.950
4909.000
0850.085
4101.000
4959.500
0900.090
5121.250
610 10.000
0950.095
4151.500
71010.500
2100.100
517 1.750
611 11.000
2150.150
4202.000
71111.500
2200.200
5222.250
61212.000
2250.250
4252.500
71212.500
2300.300
5272.750
61313.000
OR VOLTAGE COIL (NORMAL RATED VOLTAGE) 7
A32 32 DC
A48 48 DC
A65 65 DC
J06
6 AC
8 TERMINAL
1 10 Stud 10-32
2 11 Screw 10-32
3 12 Stud 1/4-20
4 11 Stud M5 x 0.8
5 11 Screw M5 x 0.8
J12
J18
J24
J48
6 12
7 13
9 15
A 14
C 15
12 AC
18 AC
24 AC
48 AC
Stud M6
0.250 Double Quick Connect
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 16,17,18
Actuator or
Visi-Color Marking:
Marking Color:
Single Color
Color: I-O ON-OFF Dual/None Rocker/Handle Visi-Rocker
White A B
1
Black White
Black C D
2
White n/a
Red F G
3 White Red
Green H J
4 White Green
Blue K L
5 White Blue
Yellow M N 6
Black Yellow
Gray P Q
7
Black Gray
Orange R S
8
Black Orange
10 MOUNTING / BARRIERS 1
STANDARD ROCKER BEZEL
1
6-32 x 0.195 inches
2
6-32 x 0.195 inches
19
3
6-32 x 0.195 inches
4
ISO M3 x 5mm
5
ISO M3 x 5mm
19
6
ISO M3 x 5mm
RECESSED OFF ROCKER
7
6-32 x 0.195 inches 8
6-32 x 0.195 inches 9
6-32 x 0.195 inches A
ISO M3 x 5mm C
ISO M3 x 5mm E
ISO M3 x 5mm PUSH-TO-RESET BEZEL
B
6-32 x 0.195 inches
D
6-32 x 0.195 inches
F 19 6-32 x 0.195 inches
H
ISO M3 x 5mm
J
ISO M3 x 5mm
M 19 ISO M3 x 5mm
BARRIERSVOLTAGE
no
<300
yes
<300
yes
≥300
no
<300
yes
<300
yes
≥300
no yes yes no yes yes <300
<300
≥300
<300
<300
≥300
no
yes
yes
no
yes
yes
<300
<300
≥300
<300
<300
≥300
11 AGENCY APPROVAL
C
UL Recognized & CSA Accepted
E TUV Certified, UL Recognized & CSA Accepted
I
UL Recognized STD 1077, UL Recognized 1500 (ignition protected),
& CSA Accepted
L UL489 Construction: UL Recognized & CSA Accepted
R
UL489 Construction: TUV Certified, UL Recognized & CSA Accepted
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
14 | C-Series Circuit Breaker - Flat Rocker UL Listed – Ordering Scheme
C 1 2
1
Series
2
Actuator
B 0
4
Circuit
3
Poles
14
5
Aux/Alarm
Switch
6
Frequency
& Delay
450
7
Current Rating
1 2 A
8
Terminal
9
Actuator
Color
K G
10
Mounting/
Barriers
11
Max. App.
Rating
12
Agency
Approval
7 CURRENT RATING (AMPERES) 5
1 SERIES
C
CODEAMPERES
2 ACTUATOR 1
Two Color Visi-Rocker
1 Indicate OFF, vertical legend
2 Indicate OFF, horizontal legend
Single color
3 Vertical legend
4 Horizontal legend
2100.100
2150.150
2200.200
2250.250
2300.300
2350.350
2400.400
2450.450
2500.500
2550.550
2600.600
2650.650
2700.700
2750.750
2800.800
2850.850
2900.900
Push-To-Reset, Visi-Rocker
5 Indicate OFF, vertical legend
6 Indicate OFF, horizontal legend
Push-To-Reset , Single color
7 Vertical legend
8 Horizontal legend
2950.950
4101.000
5121.250
4151.500
517 1.750
4202.000
5222.250
4252.500
5272.750
4303.000
4353.500
4404.000
4454.500
4505.000
4555.500
4606.000
4656.500
4707.000
4757.500
4808.000
4858.500
4909.000
4959.500
610 10.000
71010.500
611 11.000
71111.500
61212.000
71212.500
61313.000
61414.000
61515.000
61616.000
61717.000
8 TERMINAL
1 6 Stud 10-32
2 7 Screw 10-32
3 8 Stud 1/4-20
4 7 Stud M5 x 0.8
5 7 Screw M5 x 0.8
3 POLES 2
1
One
2
Two
3
Three
4 CIRCUIT
B
Series Trip (current)
5 AUXILIARY / ALARM SWITCH 3
0
without Aux Switch
2
S.P.D.T., 0.110 Q.C. Term.
3
S.P.D.T., 0.139 Solder Lug
4
S.P.D.T., 0.110 Q.C. Term.
(Gold Contacts)
6 FREQUENCY & DELAY
11 DC Ultra Short
12 DC Short
14 DC Medium
16 DC Long
21 50/60Hz Ultra Short
22 50/60Hz Short
24 50/60Hz Medium
26 50/60Hz Long
6
8
9
S.P.S.T., 0.139 Solder Lug
S.P.S.T., 0.187 Q.C. Term.
S.P.D.T., 0.187 Q.C. Term.
42 4 50/60Hz Short, Hi-Inrush
44 4 50/60Hz Medium, Hi-Inrush
46 4 50/60Hz Long, Hi-Inrush
52 4 DC Short, Hi-Inrush
54 4 DC Medium, Hi-Inrush
56 4 DC Long, Hi-Inrush
Notes:
1 Push-to-reset actuators have OFF portion of rocker shrouded.
2 Multi-pole breakers have all breakers identical except when specifying Auxiliary switch and/or mixed poles, and have one rocker per breaker.
3 On multi-pole breakers, one auxiliary switch is supplied, mounted in the extreme
right pole.
4 Available up to 50 amps maximum.
5 Current ratings 71 - 100 with VDE approvals are available up to two poles maximum.
6 Terminal Code 1 available to 60 amps maximum.
7 Terminal Codes 2, 4, 5 & C available to 50 amps maximum.
8 Terminal Codes 3, 6, 9 & A available to 100 amps maximum.
9 Terminal Codes 9 & C are not VDE approved.
10 Color shown is visi and legend with remainder of rocker black
11 Dual = ON-OFF/I-O legend on actuator.
12 TUV approval requires Dual (I-O, ON-OFF) markings on rocker.
13 Legend on push-to-reset bezel/shroud is white when single color rocker is ordered. Legend on push-to-reset bezel/shroud matches visi-color of rocker with actuator codes 5 & 6.
14 Recessed “OFF-SIDE” available with actuator codes 1, 2, 3, & 4. Legends on rocker are available in ink stamping only.
15 Barriers supplied on multi-pole units only.
16 2 & 3 pole circuit breakers required for 120/240 AC rating.
6 8
9 8,9
A 8
C 7,9
Stud M6
7/16” Clip Terminal
Plug-In Stud
5/16” Clip Terminal
9 ACTUATOR COLOR & LEGEND 10
Actuator or
Visi-Color Marking:
Marking Color:
Single Color
11,12
Color: ON-OFF Dual
Rocker/Handle White B
1
Black Black D
2
White Red G
3
White Green J
4
White Blue L
5
White Yellow N
6
Black Gray Q7 Black Orange S
8
Black 10 MOUNTING / BARRIERS
STANDARD ROCKER BEZEL Threaded Insert, 2 per pole
A
6-32 X 0.195 inches C
ISO M3 x 5mm RECESSED OFF ROCKER 14
Threaded Insert, 2 per pole
E
6-32 x 0.195 inches F
ISO M3 x 5mm PUSH-TO-RESET BEZEL 13
Threaded Insert, 2 per pole
B
6-32 x 0.195 inches D
ISO M3 x 5mm BARRIERS 15
yes
yes
yes
yes
yes
yes
11 MAXIMUM APPLICATION RATING
A
65 DC
B
125 DC
C
120/240 AC 16
D
240 AC
F
277 AC
K
120 AC
M
80 DC
12 AGENCY APPROVAL 12
A
without approvals
G
UL 489 Listed & CSA Certified
J
UL489 Listed, CSA Certified & TUV Certified
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
61818.000
62020.000
62222.000
62424.000
62525.000
63030.000
635 35.000
640 40.000
65050.000
660 60.000
670 70.000
680 80.000
685 85.000
690 90.000
695 95.000
810 100.00
Visi-Rocker
White
n/a
Red
Green
Blue
Yellow
Gray
Orange
C-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams | 15
Circuit & Terminal Diagrams: in. [mm]
.960 [24.38]
.311 DIA [Ø7.90]
.558 [14.17]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 Available on Series Trip and Switch Only Circuits when called for on multi-pole units. Only one auxiliary switch is normally supplied, as viewed in mulit-pole identification scheme.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
16 | C-Series Circuit Breaker - Handle – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 Schematic shown represents current trip circuits.
4 Available only as special catalog number.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - Handle – Dimensional Specifications | 17
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
18 | C-Series Circuit Breaker - Handleguard – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - Arc Chute Barrier UL Recognized/Listed – Dimensional Specifications | 19
Dimensional Specifications: in. [mm]
Notes:
1 Only 1-pole and 3-pole configurations shown. Arc chute (without barrier) and arc chute barrier also available for 2-pole construction.
2 Dimensions apply to all variations shown.
3 Notice that line and load terminal orientation for indicate on and indicate off rocker circuit breakers are opposite.
4 Screw type terminals shown for Rocker style (CF1, C11, etc) circuit breakers. For other terminal configurations see circuit and terminal diagrams.
5 All dimensions are in inches [millimeters].
6 Tolerance ± .020 unless otherwise specified.
7 Must be ordered under a special catalog number.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
20 | C-Series Circuit Breaker - Parallel Pole – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - Sealed Toggle – Dimensional Specifications | 21
Dimensional Specifications: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
22 | C-Series Circuit Breaker - Rocker – Circuit & Terminal Diagrams
Circuit & Terminal Diagrams: in. [mm]
Notes:
1 All dimensions are in inches [millimeters].
2 Tolerance ±.020 [.51] unless otherwise specified.
3 Schematic shown represents current trip circuit.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
C-Series Circuit Breaker - Rocker – Dimensional Specifications | 23
Dimensional Specifications: in. [mm]
Notes:
1 Dimensions apply to all variations shown. Notice that circuit breaker line and load terminal orientation on indicate OFF is opposite of indicate ON.
2 For pole orientation with horizontal legend, rotate front view clockwise 90°.
3 All dimensions are in inches [millimeters].
4 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
24 | C-Series Circuit Breaker - Flat Rocker – Dimensional Specifications
Dimensional Specifications: in. [mm]
Notes:
1 For pole orientation with horizontal legend, rotate front view clockwise 90°.
2 All dimensions are in inches [millimeters].
3 Tolerance ±.020 [.51] unless otherwise specified.
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Reps & Contact | 25
Authorized Sales Representatives
Click on the group name on the map below to find your local representative or visit
www.carlingtech.com/findarep.
«
«
Matera
W. Canada
Matera
E. Canada
MIDWEST
DM
Michigan
TEMCO Northwest
Alaska, Hawaii
«
NORTHERN
Hanna Lind Ltd.
Melody
Emery
Sierra
Bridge Marketing
Omega Limited
Dy-tronix Inc.
LD. Allen
Norris
DM Assoc
East
Pacent
DM
Assoc
TSI North
TSI
WEST
Signal
Enterprises
Luscombe
Engineering
Pinnacle Marketing
Matrix
DM Mexico
South America
Mexico
«
«
Sunbelt Components
SOUTHEAST
ProRep
Solutions
LATIN AMERICA
Americas
Europe
Middle East
Africa
Asia-Pacific
Oceania
About Carling
Founded in 1920, Carling Technologies is a leading manufacturer of electrical and electronic switches
and assemblies, circuit breakers, electronic controls, power distribution units, and multiplexed power
distribution systems. With four ISO registered manufacturing facilities and technical sales offices worldwide,
Carling Technologies Sales, Service and Engineering teams do much more than manufacture electrical
components, they engineer powerful solutions! To learn more about Carling please visit
www.carlingtech.com/company-profile.
To view all of Carling’s environmental, quality, health & safety certifications please visit
www.carlingtech.com/environmental-certifications
Email: [email protected] Application Support: [email protected]
Phone: (860) 793–9281 Fax: (860) 793–9231 www.carlingtech.com
Worldwide Headquarters
Carling Technologies, Inc.
60 Johnson Avenue, Plainville, CT 06062
Phone: 860.793.9281 Fax: 860.793.9231
Email: [email protected]
Northern Region Sales Office: [email protected]
Southeast Region Sales Office: [email protected]
Midwest Region Sales Office: [email protected]
West Region Sales Office: [email protected]
Latin America Sales Office: [email protected]
Asia-Pacific Headquarters
Carling Technologies, Asia-Pacific Ltd.,
Kowloon, Hong Kong
Phone: Int + 852-2737-2277 Fax: Int + 852-2736-9332
Email: [email protected]
Shenzhen, China: [email protected]
Shanghai, China: [email protected]
Pune, India: [email protected]
Kaohsiung, Taiwan: [email protected]
Yokohama, Japan: [email protected]
Europe | Middle East | Africa Headquarters
Carling Technologies LTD
4 Airport Business Park, Exeter Airport,
Clyst Honiton, Exeter, Devon, EX5 2UL, UK
Phone: Int + 44 1392.364422 Fax: Int + 44 1392.364477
Email: [email protected]
Germany: [email protected]
France: [email protected]
www.carlingtech.com
REV_06_2016