SDI300S12 SPT IGBT Modules Dimensions in mm (1mm = 0.0394") TC = 25oC, unless otherwise specified Absolute Maximum Ratings Symbol IGBT VCES IC ICRM VGES TVj,(Tstg) Conditions o TC= 25(80) C TC= 25(80)oC, tP =1ms _ Tstg TOPERATION < AC, 1min Visol Inverse Diode IF = -IC IFRM TC= 25(80)oC TC= 25(80)oC, tP =1ms IFSM tP =10ms; sin.;Tj=150oC Freewheeling diode TC= 25(80)oC IF = -IC IFRM TC= 25(80)oC, tP =1ms IFSM tP =10ms; sin.;Tj=150oC Values Units 1200 V 370(265) 740(530) _ +20 A A _ 40...+150(125) V o C 4000 V 260(180) 690(500) A A 1800 A 260(180) 690(500) A A 1800 A SDI300S12 SPT IGBT Modules TC = 25oC, unless otherwise specified Characteristics Symbol IGBT VGE(th) ICES VCE(TO) rCE VCE(sat) Cies Coes Cres LCE RCC'+EE' Conditions VGE = VCE, IC =8mA VGE = 0; VCE = VCES; Tj = 25(125)oC Tj = 25oC VGE = 15V, Tj = 25(125)oC IC =200A; VGE = 15V; chip level under following conditions VGE = 0, VCE = 25V, f = 1MHz min. 4.5 res., terminal-chip TC = 25(125)oC under following conditions: VCC = 600V, IC = 200A RGon = RGoff = 5 , Tj = 125oC VGE = ± 15V td(on) tr td(off) tf Eon(Eoff) Inverse Diode under following conditions: VF = VEC IF =200A; VGE = 0V; Tj = 25(125)oC V(TO) Tj = 25(125)oC rT Tj = 25(125)oC IRRM IF = 200A; Tj = 125oC Qrr di/dt = 6300A/us Err VGE = V FWD under following conditions: VF = VEC IF = 100A; VGE = 0V; Tj = 25(125)oC V(TO) Tj = 25(125)oC rT Tj = 25(125)oC IRRM IF = 200A; Tj = 25(125)oC Qrr di/dt = A/us Err VGE = V Thermal Characteristics Rth(j-c) per IGBT Rth(j-c)D per Inverse Diode Rth(c-s) per module Mechanical Data Ms to heatsink M6 Mt to terminals M6 w typ. max. 5.5 6.5 0.2 0.6 1(0.9) 1.15(1.05) 4.5(6) 6(7.5) 1.9(2.1) 2.35(2.55) 17 2 1.9 20 0.35(0.5) V mA V m V 170 55 660 60 22(22) ns ns ns ns mJ 2(1.8) 1.1 4.5 280 33 2.1(1.8) 1.1 4.5 nF nH m 2.5 1.2 6.5 V V m A uC mJ 2.5 1.2 6.5 V V m A uC mJ 0.085 0.18 K/W K/W 0.038 K/W 5 5 325 Nm Nm g 11 280 33 11 3 2.5 Units