ROHM LPM-5123W813

Pure White dot matrix unit
LPM-5123W813
The LPM-5123W813 is a 1632 dot matrix display which can be used in a wide range of applications such as graphic, alphabet,
numeric and symbol with no color distribution.
Dimensions (Unit : mm)
Applications
For information boards at stations,
bus terminals and airports.
For message board
For graphic display
P4X15=60
64
128
P4X31=124
Features
1) 1632 dot matrix.
Dot size : 2.8
2) Dimensions : 64mm128mm
3) Rohm original Potting lens method
make it possible to have High-Contrast &
Wide-View (2 1/2=140 degrees)display.
4) Enable controlling 1,024 color scale.
Suitable for gradation display such as smoothing characters.
5) 1 / 16 duty dynamic scan method.
6) Brightness adjustment circuit is built-in to
adjust the whole panel brightness.
13
1
54
1
CN2
6
1
CN3
CN1
60
60
(1)
(6)
(44)
118
Product specification
Part No.
LPM-5123W813
Emitting
surface
size
(mm)
Display
Dot Number
Dot
Emitting Wavelength size
pitch of dots
color
(nm) (mm) (mm)
(dot)
64 128 Potting lens White
www.rohm.com
c 2012 ROHM Co., Ltd. All rights reserved.
○
−
φ2.8
4
16 32
1/1
Control
ICC1
Max.
(mA)
VDD
(V)
5
500
LED
Operating
ICC2 Brightness
freq.
2
Max. (cd/m ) (MHz)
(A)
VLED
(V)
5
3.0
1300
Drive type
1/16 duty
10
(sift resister type)
(Max.) External and Internal gray
levels clock 1024 gray levels
2012.12 - Rev.B
Notice
Notes
No copying or reproduction of this document, in part or in whole, is permitted without the
consent of ROHM Co.,Ltd.
The content specified herein is subject to change for improvement without notice.
The content specified herein is for the purpose of introducing ROHM's products (hereinafter
"Products"). If you wish to use any such Product, please be sure to refer to the specifications,
which can be obtained from ROHM upon request.
Examples of application circuits, circuit constants and any other information contained herein
illustrate the standard usage and operations of the Products. The peripheral conditions must
be taken into account when designing circuits for mass production.
Great care was taken in ensuring the accuracy of the information specified in this document.
However, should you incur any damage arising from any inaccuracy or misprint of such
information, ROHM shall bear no responsibility for such damage.
The technical information specified herein is intended only to show the typical functions of and
examples of application circuits for the Products. ROHM does not grant you, explicitly or
implicitly, any license to use or exercise intellectual property or other rights held by ROHM and
other parties. ROHM shall bear no responsibility whatsoever for any dispute arising from the
use of such technical information.
The Products specified in this document are intended to be used with general-use electronic
equipment or devices (such as audio visual equipment, office-automation equipment, communication devices, electronic appliances and amusement devices).
The Products specified in this document are not designed to be radiation tolerant.
While ROHM always makes efforts to enhance the quality and reliability of its Products, a
Product may fail or malfunction for a variety of reasons.
Please be sure to implement in your equipment using the Products safety measures to guard
against the possibility of physical injury, fire or any other damage caused in the event of the
failure of any Product, such as derating, redundancy, fire control and fail-safe designs. ROHM
shall bear no responsibility whatsoever for your use of any Product outside of the prescribed
scope or not in accordance with the instruction manual.
The Products are not designed or manufactured to be used with any equipment, device or
system which requires an extremely high level of reliability the failure or malfunction of which
may result in a direct threat to human life or create a risk of human injury (such as a medical
instrument, transportation equipment, aerospace machinery, nuclear-reactor controller, fuelcontroller or other safety device). ROHM shall bear no responsibility in any way for use of any
of the Products for the above special purposes. If a Product is intended to be used for any
such special purpose, please contact a ROHM sales representative before purchasing.
If you intend to export or ship overseas any Product or technology specified herein that may
be controlled under the Foreign Exchange and the Foreign Trade Law, you will be required to
obtain a license or permit under the Law.
Thank you for your accessing to ROHM product informations.
More detail product informations and catalogs are available, please contact us.
ROHM Customer Support System
http://www.rohm.com/contact/
www.rohm.com
© 2012 ROHM Co., Ltd. All rights reserved.
R1120A