Device Material Content 5555 NE Moore Ct. Hillsboro OR 97124 (503) 268-8000 [email protected] Package: Total Device Weight April, 2011 % of Total Pkg. Wt. Weight (g) Die 1.22% 0.0151 Mold 36.72% 0.453 D/A Epoxy 0.17% 0.71% 0.0088 Solder Balls 20.18% 0.249 Foil 21.36% 19.64% with SnAgCu Solder Balls % of Total Weight (g) Pkg. Wt. Option 2 (ECP3) MSL: 3 Peak Reflow Temp: 260°C Substance CAS # Silicon chip 7440-21-3 Notes / Assumptions: Die size: 4.64 x 5.16 mm 33.05% 2.20% 1.47% 0.07% 0.4078 0.0272 0.0181 0.0009 Silica Epoxy Resin Phenol Resin Carbon Black 60676-86-0 1333-86-4 0.14% 0.03% 0.0017 0.0004 Silver-filled epoxy Silver (Ag) Organic esters and resins 7440-22-4 - Mold Compound composition: 86 to 93% Silica Fused or Amorphous (LSC uses 90% in our calculation) 1.5 to 7% Epoxy resin (LSC uses 6% in our calculation) 1 to 6% Phenol resin (LSC uses 4% in our calculation) 0.2% Carbon Black Mold Compound Density ranges between 1.99 and 2.09 grams/cc Die attach epoxy Density: 4 grams/cc 70 to 90% Silver (LSC uses 80% in our calculation) 10 to 30% Organic Esters and Resins (LSC uses 20% in our calculation) Gold (Au) 7440-57-5 0.8 to 1.0 mil diameter; 1 wire per package lead 0.0021 Wire Substrate 256 ftBGA 1.234 Grams 19.37% 0.71% 0.10% 0.2390 0.0087 0.0012 Tin (Sn) Silver (Ag) Copper (Cu) 7440-31-5 7440-22-4 7440-50-8 Solder ball composition Sn96.5/Ag3/Cu0.5 14.52% 6.83% 0.1792 0.0843 Glass fiber BT Resins 65997-17-3 - 60 to 75% glass fiber (LSC uses 68% in our calculation) Copper (Cu) 7440-50-8 0.264 0.242 Notes: The values listed above are nominal values based on studies of representatives of this particular package type, and are believed to be as accurate as possible. Constituent substances and proportions in epoxy materials are before curing. The information provided above is representative of the package as of the date listed, and is subject to change at any time. www.latticesemi.com Rev. C