FZ06 / F0062PA075SA01 preliminary datasheet flowPHASE0 600V/75A Features flow0 housing ● Trench Fieldstop IGBT technology ● 2-clip housing in 12mm and 17mm height ● Compact and low inductance design 3 ● AlN substrate for improved performance Target Applications Schematic ● Motor Drive ● UPS Types ● FZ062PA075SA01 ● F0062PA075SA01 Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit 600 V 91 110 A 225 A 196 297 W ±20 V 6 360 μs V 175 °C 600 V 80 90 A 160 A 130 197 W 175 °C Inverter Transistor Collector-emitter break down voltage DC collector current Repetitive peak collector current VCE IC ICpulse Power dissipation per IGBT Ptot Gate-emitter peak voltage VGE Short circuit ratings tSC VCC Maximum Junction Temperature Tj=Tjmax Th=80°C Tc=80°C tp limited by Tjmax Tj=Tjmax Th=80°C Tc=80°C Tj≤150°C VGE=15V Tjmax Inverter Diode Peak Repetitive Reverse Voltage DC forward current VRRM Tj=25°C IF Tj=Tjmax Repetitive peak forward current IFRM tp limited by Tjmax Power dissipation per Diode Ptot Tj=Tjmax Maximum Junction Temperature Copyright by Vincotech Tjmax 1 Th=80°C Tc=80°C Th=80°C Tc=80°C Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Maximum Ratings Tj=25°C, unless otherwise specified Parameter Condition Symbol Value Unit Thermal Properties Storage temperature Tstg -40…+125 °C Operation temperature under switching condition Top -40…+(Tjmax - 25) °C 4000 V Creepage distance min 12,7 mm Clearance min 12,7 mm Insulation Properties Insulation voltage Copyright by Vincotech Vis t=2s DC voltage 2 Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Characteristic Values Parameter Conditions Symbol VGE [V] or VGS [V] Vr [V] or VCE [V] or VDS [V] Value IC [A] or IF [A] or ID [A] Tj Unit Min Typ Max 5 5,8 6,5 1 1,63 1,87 2,1 Inverter Transistor VCE=VGE Gate emitter threshold voltage VGE(th) Collector-emitter saturation voltage VCE(sat) 15 Collector-emitter cut-off current incl. Diode ICES 0 600 Gate-emitter leakage current IGES 20 0 Integrated Gate resistor Rgint Turn-on delay time td(on) Rise time Turn-off delay time Fall time 0,0008 75 tf Turn-on energy loss per pulse Eon Turn-off energy loss per pulse Eoff Input capacitance Cies Output capacitance Coss Reverse transfer capacitance Crss Gate charge QGate Thermal resistance chip to heatsink per chip RthJH Thermal resistance chip to case per chip RthJC 0,03 700 Rgoff=2 Ω Rgon=2 Ω ±15 300 75 Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C V V mA nA Ω 4 tr td(off) Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C 123 132 15 21 169 199 87 105 0,52 0,89 1,68 2,26 ns mWs 4700 f=1MHz Tj=25°C 25 0 pF 300 145 Tj=25°C ±15 465 Thermal foil thickness=76um Kunze foil KUALF5 nC 0,48 K/W Inverter Diode Diode forward voltage Peak reverse recovery current VF IRRM Reverse recovery time trr Reverse recovered charge Qrr Peak rate of fall of recovery current Reverse recovered energy Rgon=2 Ω 300 ±15 di(rec)max /dt Erec Thermal resistance chip to heatsink per chip RthJH Thermal resistance chip to case per chip RthJC Copyright by Vincotech 50 Thermal foil thickness=76um Kunze foil KUALF5 75 Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C Tj=25°C Tj=150°C 1 1,64 1,59 93,621 110,6 100,9 128,2 3,24 6,5 6615 4412 0,75 1,57 2,1 V A ns μC A/μs mWs 0,73 K/W 3 Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Output Inverter Output inverter IGBT Figure 1 Typical output characteristics IC = f(VCE) Output inverter IGBT Figure 2 Typical output characteristics IC = f(VCE) IC (A) 200 IC (A) 200 160 160 120 120 80 80 40 40 0 0 0 At tp = Tj = VGE from 1 2 3 4 V CE (V) 5 0 At tp = Tj = VGE from 350 μs 25 °C 7 V to 17 V in steps of 1 V Output inverter IGBT Figure 3 Typical transfer characteristics IC = f(VGE) 1 2 3 4 5 350 μs 150 °C 7 V to 17 V in steps of 1 V Output inverter FRED Figure 4 Typical diode forward current as a function of forward voltage IF = f(VF) 200 IC (A) IF (A) 75 V CE (V) 60 160 45 120 30 80 Tj = Tjmax-25°C Tj = Tjmax-25°C 15 40 Tj = 25°C Tj = 25°C 0 0 0 2 4 At tp = VCE = 350 10 μs V Copyright by Vincotech 6 8 10 V GE (V) 12 0 At tp = 4 0,5 350 1 1,5 2 2,5 V F (V) 3 μs Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Output Inverter Output inverter IGBT Figure 5 Typical switching energy losses as a function of collector current E = f(IC) Output inverter IGBT Figure 6 Typical switching energy losses as a function of gate resistor E = f(RG) 4 E (mWs) E (mWs) 4 Eoff High T 3,2 3,2 Eoff Low T 2,4 2,4 1,6 1,6 Eoff High T Eoff Low T Eon High T Eon Low T Eon High T 0,8 0,8 Eon Low T 0 0 0 30 60 90 120 I C (A) 0 150 With an inductive load at Tj = °C 25/150 VCE = 300 V VGE = ±15 V Rgon = 2 Ω Rgoff = 2 Ω 2 4 6 8 RG(Ω) 10 With an inductive load at Tj = °C 25/150 VCE = 300 V VGE = ±15 V IC = 75 A Output inverter IGBT Figure 7 Typical reverse recovery energy loss as a function of collector current Erec = f(IC) Output inverter IGBT Figure 8 Typical reverse recovery energy loss as a function of gate resistor Erec = f(RG) E (mWs) 2,5 E (mWs) 2,5 Erec 2 2 Tj = Tjmax -25°C Tj = Tjmax -25°C 1,5 Erec 1,5 Tj = 25°C Erec 1 1 Tj = 25°C 0,5 Erec 0,5 0 0 0 30 60 90 120 I C (A) 150 0 With an inductive load at Tj = 25/150 °C VCE = 300 V VGE = ±15 V Rgon = 2 Ω Copyright by Vincotech 2 4 6 8 RG(Ω) 10 With an inductive load at Tj = 25/150 °C VCE = 300 V VGE = ±15 V IC = 75 A 5 Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Output Inverter Output inverter IGBT Figure 9 Typical switching times as a function of collector current t = f(IC) Output inverter IGBT Figure 10 Typical switching times as a function of gate resistor t = f(RG) 1 t ( μs) t ( μs) 1 tdoff tdoff tdon tdon 0,1 tf 0,1 tf tr tr 0,01 0,01 0,001 0,001 0 30 60 90 120 I C (A) 150 0 With an inductive load at Tj = 150 °C VCE = 300 V VGE = ±15 V Rgon = 2 Ω Rgoff = 2 Ω 2 4 6 8 RG(Ω ) 10 With an inductive load at Tj = 150 °C VCE = 300 V VGE = ±15 V IC = 75 A Output inverter FRED Figure 11 Typical reverse recovery time as a function of collector current trr = f(IC) Output inverter FRED Figure 12 Typical reverse recovery time as a function of IGBT turn on gate resistor trr = f(Rgon) 0,25 t rr( μs) t rr( μs) 0,14 trr 0,12 Tj = Tjmax -25°C trr 0,2 Tj = Tjmax -25°C Tj = 25°C trr 0,1 0,15 0,08 trr Tj = 25°C 0,06 0,1 0,04 0,05 0,02 0 0 0 At Tj = VCE = VGE = Rgon = 30 25/150 300 ±15 2 60 90 120 I C (A) 0 150 At Tj = VR = IF = VGE = °C V V Ω Copyright by Vincotech 6 2 25/150 300 75 ±15 4 6 8 R g on ( Ω ) 10 °C V A V Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Output Inverter Output inverter FRED Figure 13 Typical reverse recovery charge as a function of collector current Qrr = f(IC) Output inverter FRED Figure 14 Typical reverse recovery charge as a function of IGBT turn on gate resistor Qrr = f(Rgon) 10 Qrr( μC) Qrr( μC) 10 Qrr 8 8 Tj = Tjmax -25°C Qrr Tj = Tjmax -25°C 6 6 Qrr Tj = 25°C 4 4 Tj = 25°C Qrr 2 2 0 0 At 0 At Tj = VCE = VGE = Rgon = 30 25/150 300 ±15 2 60 90 120 I C (A) 150 0 2 At Tj = VR = IF = VGE = °C V V Ω Output inverter FRED Figure 15 Typical reverse recovery current as a function of collector current IRRM = f(IC) 4 25/150 300 75 ±15 6 8 R g on ( Ω) 10 °C V A V Output inverter FRED Figure 16 Typical reverse recovery current as a function of IGBT turn on gate resistor IRRM = f(Rgon) 150 150 IrrM (A) IrrM (A) IRRM 120 120 IRRM Tj = Tjmax -25°C Tj = Tjmax - 25°C 90 90 IRRM Tj = 25°C Tj = 25°C 60 60 30 30 IRRM 0 0 0 30 At Tj = VCE = VGE = Rgon = 25/150 300 ±15 2 60 90 120 I C (A) 0 150 At Tj = VR = IF = VGE = °C V V Ω Copyright by Vincotech 7 2 25/150 300 75 ±15 4 6 8 R gon ( Ω ) 10 °C V A V Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Output Inverter Output inverter FRED Figure 17 Typical rate of fall of forward and reverse recovery current as a function of collector current dI0/dt,dIrec/dt = f(IC) 10000 direc / dt (A/ μs) 10000 direc / dt (A/μ s) Output inverter FRED Figure 18 Typical rate of fall of forward and reverse recovery current as a function of IGBT turn on gate resistor dI0/dt,dIrec/dt = f(Rgon) dI0/dt dIrec/dt 8000 dI0/dt dIrec/dt 8000 Tj = 25°C dIrec/dtLow T Tj = Tjmax - 25°C 6000 6000 di0/dtHigh T dIo/dtLow T 4000 4000 dIrec/dtHigh T 2000 2000 dIrec/dtHigh T 0 0 0 At Tj = VCE = VGE = Rgon = 30 25/150 300 ±15 2 60 90 I C (A) 120 150 0 At Tj = VR = IF = VGE = °C V V Ω Output inverter IGBT Figure 19 IGBT transient thermal impedance as a function of pulse width ZthJH = f(tp) 2 25/150 300 75 ±15 4 6 10 °C V A V Output inverter FRED Figure 20 FRED transient thermal impedance as a function of pulse width ZthJH = f(tp) 100 ZthJH (K/W) Zth-JH (K/W) 100 R gon ( Ω ) 8 10-1 10-1 D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 D = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 -2 10 10-2 10-5 At D= RthJH = 10-4 10-3 10-2 10-1 100 t p (s) 10-5 1011 At D= RthJH = tp / T 0,48 K/W 10-4 10-3 0,73 R (C/W) 0,02 0,07 0,12 0,19 0,05 0,04 R (C/W) 0,02 0,09 0,14 0,29 0,11 0,09 8 100 t p (s) 1011 K/W FRED thermal model values Copyright by Vincotech 10-1 tp / T IGBT thermal model values Tau (s) 9,5E+00 1,2E+00 1,6E-01 4,0E-02 3,4E-03 4,0E-04 10-2 Tau (s) 9,5E+00 1,1E+00 1,4E-01 3,7E-02 4,7E-03 4,8E-04 Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Output Inverter Output inverter IGBT Figure 21 Power dissipation as a function of heatsink temperature Ptot = f(Th) Output inverter IGBT Figure 22 Collector current as a function of heatsink temperature IC = f(Th) 400 IC (A) Ptot (W) 120 100 300 80 200 60 40 100 20 0 0 0 At Tj = 50 175 100 °C 150 T h ( o C) 200 0 At Tj = VGE = single heating overall heating Output inverter FRED Figure 23 Power dissipation as a function of heatsink temperature Ptot = f(Th) 50 175 15 100 T h ( o C) 200 °C V Output inverter FRED Figure 24 Forward current as a function of heatsink temperature IF = f(Th) 100 IF (A) Ptot (W) 250 150 200 75 150 50 100 25 50 0 0 0 At Tj = 50 175 100 °C Copyright by Vincotech 150 T h ( o C) 200 0 At Tj = single heating overall heating 9 50 175 100 150 T h ( o C) 200 °C Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Output Inverter Output inverter IGBT Figure 25 Safe operating area as a function of collector-emitter voltage IC = f(VCE) Output inverter IGBT Figure 26 Gate voltage vs Gate charge VGE = f(QGE) IC (A) VGE (V) 22 20 10uS 10 18 3 DC 100mS 1mS 10mS 480V 120V 16 100uS 14 2 10 12 10 1 10 8 6 4 100 2 0 10-1 0 10 At D= Th = VGE = Tj = 10 1 10 2 V CE (V) 0 103 200 300 400 500 600 Q g (nC) At IC = single pulse 80 ºC ±15 V Tjmax ºC Copyright by Vincotech 100 10 75 A Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Switching Definitions Output Inverter General conditions = 150 °C Tj = 2Ω Rgon Rgoff = 2Ω Output inverter IGBT Figure 1 Output inverter IGBT Figure 2 Turn-off Switching Waveforms & definition of tdoff, tEoff (tEoff = integrating time for Eoff) Turn-on Switching Waveforms & definition of tdon, tEon (tEon = integrating time for Eon) 150 260 % % IC tdoff 125 210 VCE 100 VGE 90% VCE 90% 160 75 IC 50 VCE 110 tEoff VGE tdon 60 25 VGE IC10% VGE10% 10 0 VCE 3% IC 1% tEon -25 -0,2 -0,05 0,1 0,25 0,4 -40 0,55 2,8 time (us) VGE (0%) = VGE (100%) = VC (100%) = IC (100%) = tdoff = tEoff = -15 15 300 75 0,20 0,46 2,95 VGE (0%) = VGE (100%) = VC (100%) = IC (100%) = tdon = tEon = V V V A μs μs Output inverter IGBT Figure 3 3,1 -15 15 300 75 0,13 0,23 3,25 3,55 time(us) V V V A μs μs Output inverter IGBT Figure 4 Turn-off Switching Waveforms & definition of tf 3,4 Turn-on Switching Waveforms & definition of tr 140 260 % fitted % 120 IC 220 VCE 100 180 IC 90% 80 140 IC 60% 60 VCE 100 IC90% IC 40% 40 60 20 tr IC10% 0 tf -20 0,05 0,1 0,15 0,2 20 0,25 0,3 -20 2,95 0,35 time (us) VC (100%) = IC (100%) = tf = 300 75 0,10 Copyright by Vincotech Ic IC10% 3,03 3,11 3,19 3,27 3,35 time(us) VC (100%) = IC (100%) = tr = V A μs 11 300 75 0,02 V A μs Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Switching Definitions Output Inverter Output inverter IGBT Figure 5 Output inverter IGBT Figure 6 Turn-off Switching Waveforms & definition of tEoff Turn-on Switching Waveforms & definition of tEon 120 120 % Poff % Eoff 100 100 80 80 60 60 40 40 20 20 Eon Pon VGE 10% VCE 3% VGE 90% 0 0 tEoff tEon IC 1% -20 -0,2 -0,05 0,1 0,25 0,4 -20 2,95 0,55 3,05 3,15 3,25 3,35 time(us) time (us) Poff (100%) = Eoff (100%) = tEoff = 22,63 2,27 0,46 Pon (100%) = Eon (100%) = tEon = kW mJ μs Output inverter FRED Figure 7 Gate voltage vs Gate charge (measured) 22,63 0,89 0,23 kW mJ μs Output inverter IGBT Figure 8 Turn-off Switching Waveforms & definition of trr 20 VGE (V) 120 % 15 80 Id trr 10 fitted 40 5 0 Vd 0 IRRM10% -40 -5 -80 -10 -120 -15 IRRM90% IRRM100% -20 -100 0 100 200 300 400 500 600 -160 3,05 700 3,1 3,15 3,2 Qg (nC) VGEoff = VGEon = VC (100%) = IC (100%) = Qg = -15 15 300 75 12785,80 Copyright by Vincotech 3,25 3,3 3,35 time(us) Vd (100%) = Id (100%) = IRRM (100%) = trr = V V V A nC 12 300 75 -110 0,13 V A A μs Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Switching Definitions Output Inverter Output inverter FRED Figure 9 Output inverter FRED Figure 10 Turn-on Switching Waveforms & definition of tQrr (tQrr = integrating time for Qrr) Turn-on Switching Waveforms & definition of tErec (tErec= integrating time for Erec) 120 150 % Erec % Qrr 100 100 Id 80 50 tQrr tErec 60 0 40 -50 20 Prec -100 0 -150 3,05 3,15 3,25 3,35 3,45 -20 3,05 3,55 3,15 3,25 3,35 time(us) Id (100%) = Qrr (100%) = tQrr = 75 6,46 0,26 Copyright by Vincotech Prec (100%) = Erec (100%) = tErec = A μC μs 13 22,63 1,54 0,26 3,45 3,55 time(us) kW mJ μs Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet Ordering Code and Marking - Outline - Pinout Ordering Code & Marking Version Ordering Code without thermal paste 12mm housing without thermal paste 17mm housing 10-FZ062PA075SA01-P993F18 10-F0062PA075SA01-P993F19 in DataMatrix as P993F18 P993F19 in packaging barcode as P993F18 P993F19 Outline Pinout Copyright by Vincotech 14 Revision: 1 FZ06 / F0062PA075SA01 preliminary datasheet PRODUCT STATUS DEFINITIONS Datasheet Status Target Preliminary Final Product Status Definition Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. The data contained is exclusively intended for technically trained staff. First Production This datasheet contains preliminary data, and supplementary data may be published at a later date. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. Full Production This datasheet contains final specifications. Vincotech reserves the right to make changes at any time without notice in order to improve design. The data contained is exclusively intended for technically trained staff. DISCLAIMER The information given in this datasheet describes the type of component and does not represent assured characteristics. For tested values please contact Vincotech.Vincotech reserves the right to make changes without further notice to any products herein to improve reliability, function or design. Vincotech does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the rights of others. LIFE SUPPORT POLICY Vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of Vincotech. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. Copyright by Vincotech 15 Revision: 1