0.25W DC-DC Converter P0D-Series ● ● ● ● ● ● 8 Pin DIL Low ripple and noise 1000 VDC isolation Up to 3000 VDC isolation PC Board mounted MTBF >1,12 MHours Model selection guide Typ P0D053R3DL P0D0505DL P0D057R2DL P0D0509DL P0D0512DL P0D0515DL P0D0518DL P0D0524DL P0D123R3DL P0D1205DL P0D127R2DL P0D1209DL P0D1212DL P0D1215DL P0D1218DL P0D1224DL P0D243R3DL P0D2405DL P0D247R2DL P0D2409DL P0D2412DL P0D2415DL P0D2418DL P0D2424DL Input voltage Range [VDC] 5 5 5 5 5 5 5 5 12 12 12 12 12 12 12 12 24 24 24 24 24 24 24 24 No load [mA] 20 20 20 20 20 20 20 20 15 15 15 15 15 15 15 15 8 8 8 8 8 8 8 8 Input Current Full load [mA] 75 75 75 73 73 73 73 71 31 31 30 30 30 30 29 28 15 15 15 15 15 15 15 15 Output voltage [VDC] 3.3 5.0 7.2 9.0 12.0 15.0 18.0 24.0 3.3 5.0 7.2 9.0 12.0 15.0 18.0 24.0 3.3 5.0 7.2 9.0 12.0 15.0 18.0 24.0 Output current Efficiency typ. [mA] 76 50 35 28 21 17 14 11 76 50 35 28 21 17 14 11 76 50 35 28 21 17 14 11 [%] 66 66 68 68 68 68 68 70 66 67 68 68 68 69 70 72 67 67 67 69 69 69 69 69 Capacitive load [µF] 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 Suffix: “H” for 3kV isolation voltage Output voltage at load change Page 1 of 2 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstraße 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected] 0.25W DC-DC Converter P0D-Series Specifications Input Voltage range Filter Isolation: Rated voltage ± 3%, max. 100 mVp-p, max. General Switching frequency Safety Standard in accordance with Environmental Operating temperatur (ambient) Case temperature Storage temperature Derating Humidity Momentary ± 1.2% @ 1.0% of delta Vin ± 10%, @ load 20..100% ± 20% only 3.3V types ± 0.02% / °C Cooling Physical Dimensions Weight Case material ± 10% Capacitors 1000 VDC, standard 3000 VDC suffix H 9 10 Ω 60 pF, typ. Resistance Capacitance Output Voltage accuracy Ripple and noise (at 20 MHz BW) Short circuit protection Line voltage behaviour Load voltage behaviour at load change 20…100% Temperature coefficient Pin soldering temperature 1.5mm distance from body Dimensions 80 kHz, typ. IEC60950-1 -40 °C to +85 °C 100 °C, max. -40 °C to +125 °C None required Up to 95%, non-condensing Free-air convection 12.7 x 10.16 x 6.85 mm 1.8 g non-conductive black plastic (UL94V-0 rated) 260°C for 10 sec 12.7 10.16 PHI-CON P0D0505D 6.85 3.05 Pin size is 0.5mm ∅ or 0.5 x 0.3mm 7.62 7.62 1 4 bottom view 7 0.5 All dimensions in mm Tolerance ±0.25 mm 5 5.08 Pin connections Pin Single 1 -V Input 4 +V Input 5 +V Output 7 -V Output Life Support Policy: HY-LINE does not authorize the use of any of its products for use in life support devices or systems without the express written approval of an officer of the Company. Life support systems are devices which support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. Rev: 4.11 f Page 2 of 2 Deutschland: Inselkammerstraße 10 D-82008 Unterhaching Tel.: 089 614 503-10 E-Mail: [email protected] Schweiz: Gründenstraße 82 CH-8247 Flurlingen Tel.: 052 647 42 00 E-Mail: [email protected]