ISL28107 and ISL28207 Features The ISL28107 and ISL28207 are single and dual amplifiers featuring low noise, low input bias current, and low offset and temperature drift. This makes them the ideal choice for applications requiring both high DC accuracy and AC performance. The combination of precision, low noise, and small footprint provides the user with outstanding value and flexibility relative to similar competitive parts. • Low Input Offset . . . . . . . . . . . . . . . . 75µV, Max. • Input Bias Current . . . . . . . . . . . . . . . . . . . .60pA • Superb Temperature Drift - Voltage Offset . . . . . . . . . . . . . 0.65µV/°C, Max. - Input Current . . . . . . . . . . . . . . . 0.9pA/°C, Max • Outstanding ESD performance - Human Body Model . . . . . . . . . . . . . . . . . 4.5kV - Machine Model . . . . . . . . . . . . . . . . . . . . .500V - Charged Device Model . . . . . . . . . . . . . . . 1.5kV • Very Low Voltage Noise, 10Hz . . . . . . . . 14nV/√Hz • Low Current Consumption (per amp . 0.29mA, Max. • Gain-bandwidth Product . . . . . . . . . . . . . . . 1MHz • Wide Supply Range. . . . . . . . . . . . . . . 4.5V to 40V • Operating Temperature Range . . . -40°C to +125°C • No Phase Reversal • Pb-Free (RoHS Compliant) Applications for these amplifiers include precision active filters, medical and analytical instrumentation, precision power supply controls, and industrial controls. The ISL28107 single is available in an 8 Ld SOIC package. The ISL28207 dual amplifier will be offered in an 8 Ld SOIC package. All devices are offered in standard pin configurations and operate over the extended temperature range to -40°C to +125°C. Applications*(see page 21) • • • • • • • • • Typical Application Input Noise Voltage Spectral Density C1 V+ R1 19.1k OUTPUT R2 + 48.7k 3.3nF C2 V- Sallen-Key Low Pass Filter (1kHz) INPUT NOISE VOLTAGE (nV/√Hz) 1000 8.2nF VIN Precision Instruments Medical Instrumentation Spectral Analysis Equipment Geophysical Analysis Equipment Active Filter Blocks Microphone Pre-amplifier Thermocouples and RTD Reference Buffers Data Acquisition Power Supply Control V+ = ±19V AV = 1 100 10 0.1 1 10 100 1k 10k 100k FREQUENCY (Hz) November 16, 2009 FN6631.1 1 CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures. 1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc. Copyright Intersil Americas Inc. 2009. All Rights Reserved All other trademarks mentioned are the property of their respective owners. ISL28107, ISL28207 Precision Single and Dual Low Noise Operational Amplifiers ISL28107, ISL28207 Ordering Information PART NUMBER (Notes 1, 3) PART MARKING TEMP. RANGE (°C) PACKAGE (Pb-Free) PKG. DWG. # ISL28207FBZ 28207 FBZ -40 to +125 8 Ld SOIC M8.15E ISL28207FBZ-T7 (Note 2) 28207 FBZ -40 to +125 8 Ld SOIC M8.15E ISL28207FBZ-T13 (Note 2) 28207 FBZ -40 to +125 8 Ld SOIC M8.15E ISL28107FBZ 28107 FBZ -40 to +125 8 Ld SOIC M8.15E ISL28107FBZ-T7 (Note 2) 28107 FBZ -40 to +125 8 Ld SOIC M8.15E ISL28107FBZ-T13 (Note 2) 28107 FBZ -40 to +125 8 Ld SOIC M8.15E NOTES: 1. These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100% matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations). Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020. 2. “-T7” and “-T13” suffix is for tape and reel. Please refer to TB347 for details on reel specifications. 3. For Moisture Sensitivity Level (MSL), please see device information page for ISL28107 and ISL28207. For more information on MSL please see techbrief TB363. Pin Configurations ISL28207 (8 LD SOIC) TOP VIEW ISL28107 (8 LD SOIC) TOP VIEW 8 NC VOUTA 1 7 V+ -IN_A 2 3 6 VOUTA +IN_A 3 4 5 NC V- 4 NC 1 -IN_A 2 +IN_A V- - + - + + - 8 V+ 7 VOUTB 6 -IN_B 5 +IN_B Pin Descriptions ISL28107 (8 LD SOIC) ISL28207 (8 LD SOIC) PIN NAME EQUIVALENT CIRCUIT 3 3 +IN_A Circuit 1 Amplifier A non-inverting input 4 4 V- Circuit 3 Negative power supply 5 +IN_B Circuit 1 Amplifier B non-inverting input 6 -IN_B Circuit 1 Amplifier B inverting input 7 VOUTB Circuit 2 Amplifier B output 7 8 V+ Circuit 3 Positive power supply 6 1 VOUTA Circuit 2 Amplifier A output 2 2 -IN_A Circuit 1 Amplifier A inverting input NC - 1, 5, 8 IN- 500Ω V+ V+ IN+ OUT 500Ω DESCRIPTION No internal connection V CAPACITIVELY TRIGGERED V- VCIRCUIT 2 CIRCUIT 1 2 VCIRCUIT 3 FN6631.1 November 16, 2009 ISL28107, ISL28207 Absolute Maximum Ratings Thermal Information Maximum Supply Voltage . . . . . . . . . . . . . . . . . . . . . . 42V Maximum Differential Input Current . . . . . . . . . . . . . 20mA Maximum Differential Input Voltage (V-) - 0.5V to (V+) + 0.5V Min/Max Input Voltage . . . . . . . . (V-) - 0.5V to (V+) + 0.5V Max/Min Input current for input voltage >V+ or <V- . ±20mA Output Short-Circuit Duration (1 output at a time) Indefinite ESD Tolerance Human Body Model . . . . . . . . . . . . . . . . . . . . . . . . 4.5kV Machine Model . . . . . . . . . . . . . . . . . . . . . . . . . . . 500V Charged Device Model . . . . . . . . . . . . . . . . . . . . . . 1.5kV Thermal Resistance (Typical, Note 4) θJA (°C/W) 8 Ld SOIC Package (ISL28107) . . . . . . . . 120 8 Ld SOIC Package (ISL28207) . . . . . . . . 115 Storage Temperature Range . . . . . . . . . . . -65°C to +150°C Pb-Free Reflow Profile. . . . . . . . . . . . . . . . . . see link below http://www.intersil.com/pbfree/Pb-FreeReflow.asp Operating Conditions Ambient Operating Temperature Range. . . . -40°C to +125°C Maximum Operating Junction Temperature . . . . . . . +150°C CAUTION: Do not operate at or near the maximum ratings listed for extended periods of time. Exposure to such conditions may adversely impact product reliability and result in failures not covered by warranty. NOTE: 4. θJA is measured with the component mounted on a high effective thermal conductivity test board in free air. See Tech Brief TB379 for details. IMPORTANT NOTE: All parameters having Min/Max specifications are guaranteed. Typical values are for information purposes only. Unless otherwise noted, all tests are at the specified temperature and are pulsed tests, therefore: TJ = TC = TA Electrical Specifications VS ±15V, VCM = 0, VO = 0V, RL = Open, TA= +25°C, unless otherwise noted. Boldface limits apply over the operating temperature range, -40°C to +125°C. Temperature data established by characterization. PARAMETER VOS DESCRIPTION Offset Voltage Magnitude CONDITIONS TA = -40°C to +85°C TA = -40°C to +125°C TCVOS Offset Voltage Drift IB Input Bias Current TCIB IOS TCIOS Input Bias Current Drift Input Offset Current Input Offset Current Drift MIN (Note 5) TYP MAX (Note 5) UNIT -75 5 75 µV 140 µV -140 -0.65 0.1 0.65 µV/°C TA = -40°C to +85°C -300 15 300 pA TA = -40°C to +125°C -600 600 pA TA = -40°C to +85°C -0.9 0.19 0.9 pA/°C TA = -40°C to +125°C -3.5 0.26 3.5 pA/°C TA = -40°C to +85°C -300 15 300 pA TA = -40°C to +125°C -600 600 pA TA = -40°C to +85°C -0.9 0.19 0.9 pA/°C TA = -40°C to +125°C -3.5 0.26 3.5 pA/°C 13 V VCM Input Voltage Range Guaranteed by CMRR test -13 CMRR Common-Mode Rejection Ratio VCM = -13V to +13V 115 145 dB PSRR Power Supply Rejection Ratio VS = ±2.25V to ±20V 115 145 dB AVOL Open-Loop Gain VO = -13V to +13V, RL = 10kΩ to ground 3,000 40,000 V/mV VOH Output Voltage High RL = 10kΩ to ground 13.5 13.7 V 13.2 RL = 2kΩ to ground 13.3 V 13.55 V 13.1 VOL Output Voltage Low RL = 10kΩ to ground RL = 2kΩ to ground 3 V -13.7 -13.55 -13.5 V -13.2 V -13.3 V -13.1 V FN6631.1 November 16, 2009 ISL28107, ISL28207 Electrical Specifications VS ±15V, VCM = 0, VO = 0V, RL = Open, TA= +25°C, unless otherwise noted. Boldface limits apply over the operating temperature range, -40°C to +125°C. Temperature data established by characterization. (Continued) PARAMETER IS ISC VSUPPLY DESCRIPTION Supply Current/Amplifier CONDITIONS MIN (Note 5) RL = Open Output Short-Circuit Current Note 3 Supply Voltage Range TYP MAX (Note 5) UNIT 0.21 0.29 mA 0.35 mA ±40 Guaranteed by PSRR ±2.25 mA ±20 V AC SPECIFICATIONS GBW Gain Bandwidth Product 1 MHz enp-p Voltage Noise 0.1Hz to 10Hz, VS = ±19V 340 nVP-P en Voltage Noise Density f = 10Hz, VS = ±19V 14 nV/√Hz en Voltage Noise Density f = 100Hz, VS = ±19V 13 nV/√Hz en Voltage Noise Density f = 1kHz, VS = ±19V 13 nV/√Hz en Voltage Noise Density f = 10kHz, VS = ±19V 13 nV/√Hz in Current Noise Density f = 10kHz, VS = ±19V 53 fA/√Hz THD + N Total Harmonic Distortion + Noise 1kHz, G = 1, VO = 3.5VRMS, RL = 2kΩ 0.0035 % ±0.32 V/µs TRANSIENT RESPONSE SR Slew Rate AV = 10, RL = 10kΩ, VO = 10VP-P tr, tf, Small Signal Rise Time 10% to 90% of VOUT AV = 1, VOUT = 100mVP-P, Rf = 0Ω, RL = 2kΩ to VCM 355 ns Fall Time 90% to 10% of VOUT AV = 1, VOUT = 100mVP-P, Rf = 0Ω, RL = 2kΩ to VCM 365 ns Settling Time to 0.1% 10V Step; 10% to VOUT AV = -1 VOUT = 10VP-P, Rg = Rf =10k, RL = 2kΩ to VCM 29 µs Settling Time to 0.01% 10V Step; 10% to VOUT AV = -1, VOUT = 10VP-P, Rg = Rf =10k, RL = 2kΩ to VCM 31.2 µs Output Overload Recovery Time AV = 100, VIN = 0.2V , RL = 2kΩ to VCM 6 µs ts tOL Electrical SpecificationsVS ±5V, VCM = 0, VO = 0V, TA = +25°C, unless otherwise noted. Boldface limits apply over the operating temperature range, -40°C to +125°C. Temperature data established by characterization. PARAMETER VOS DESCRIPTION Offset Voltage Magnitude CONDITIONS TA = -40°C to +85°C TA = -40°C to +125°C TCVOS Offset Voltage Drift IB Input Bias Current TCIB IOS Input Bias Current Drift Input Offset Current 4 MIN (Note 5) TYP MAX (Note 5) UNIT -75 5 75 µV 140 µV -140 -0.65 0.1 0.65 µV/°C TA = -40°C to +85°C -300 15 300 pA TA = -40°C to +125°C -600 600 pA TA = -40°C to +85°C -0.9 0.19 0.9 pA/°C TA = -40°C to +125°C -3.5 0.26 3.5 pA/°C TA = -40°C to +85°C -300 15 300 pA TA = -40°C to +125°C -600 600 pA FN6631.1 November 16, 2009 ISL28107, ISL28207 Electrical SpecificationsVS ±5V, VCM = 0, VO = 0V, TA = +25°C, unless otherwise noted. Boldface limits apply over the operating temperature range, -40°C to +125°C. Temperature data established by characterization. (Continued) PARAMETER TCIOS MIN (Note 5) TYP MAX (Note 5) UNIT TA = -40°C to +85°C -0.9 0.19 0.9 pA/°C TA = -40°C to +125°C -3.5 0.26 3.5 pA/°C 3 V DESCRIPTION Input Offset Current Drift CONDITIONS VCM Common Mode Input Voltage Range Guaranteed by CMRR test -3 CMRR Common-Mode Rejection Ratio VCM = -3V to +3V 115 145 dB PSRR Power Supply Rejection Ratio VS = ±2.25V to ±5V 115 145 dB AVOL Open-Loop Gain VO = -3V to +3V, RL = 10kΩ to ground 3,000 40,000 V/mV VOH Output Voltage High RL = 10kΩ to ground 3.5 3.7 V 3.2 RL = 2kΩ to ground 3.3 V 3.55 V 3.1 VOL Output Voltage Low RL = 10kΩ to ground RL = 2kΩ to ground IS ISC Supply Current/Amplifier Output Short-Circuit Current RL = Open Note 3 V -3.7 -3.55 0.21 -3.5 V -3.2 V -3.3 V -3.1 V 0.29 mA 0.35 mA ± 40 mA 1 MHz 0.0053 % AC SPECIFICATIONS GBW Gain Bandwidth Product THD + N Total Harmonic Distortion + Noise 1kHz, G = 1, Vo = 2.5VRMS, RL = 2kΩ TRANSIENT RESPONSE SR Slew Rate AV = 10, RL = 2kΩ 0.32 V/µs tr, tf, Small Signal Rise Time 10% to 90% of VOUT AV = 1, VOUT = 100mVP-P, Rf = 0Ω, RL = 2kΩ to VCM 355 ns Fall Time 90% to 10% of VOUT AV = 1, VOUT = 100mVP-P, Rf = 0Ω, RL = 2kΩ to VCM 370 ns Settling Time to 0.1% 4V Step; 10% to VOUT AV = -1, VOUT = 4VP-P, Rf = Rg = 2kΩ, RL = 2kΩ to VCM 12.4 µs Settling Time to 0.01% 4V Step; 10% to VOUT AV = -1, VOUT = 4VP-P, Rf = Rg = 2kΩ, RL = 2kΩ to VCM 22 µs ts NOTE: 5. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. Temperature limits established by characterization and are not production tested. 6. Output Short Circuit Current is the minimum current (source or sink) when the output is driven into the supply rails with RL = 0Ω to ground. 5 FN6631.1 November 16, 2009 ISL28107, ISL28207 Typical Performance Curves VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. 30 30 VS = ±5V 20 20 10 10 Vos (µV) Vos (µV) VS = ±15V 0 0 -10 -10 -20 -20 -30 -50 0 50 TEMPERATURE (°C) 100 -30 -50 150 0 50 TEMPERATURE (°C) 100 FIGURE 2. INPUT OFFSET VOLTAGE vs TEMPERATURE, VS = ±5V FIGURE 1. INPUT OFFSET VOLTAGE vs TEMPERATURE, VS = ±15V 1400 1400 VS = ±5V 1200 NUMBER OF AMPLIFIERS NUMBER OF AMPLIFIERS VS = ±15V 1000 800 600 400 1200 1000 200 0 -100 -80 -60 -40 -20 0 20 VOS (µV) 40 60 80 NUMBER OF AMPLIFIERS NUMBER OF AMPLIFIERS 6 4 2 200 -80 -60 -40 -20 0 20 VOS (µV) 40 60 80 100 VS = ±5V 14 8 400 16 VS = ±15V 10 600 FIGURE 4. INPUT OFFSET VOLTAGE DISTRIBUTION, VS = ±5V 16 12 800 0 -100 100 FIGURE 3. INPUT OFFSET VOLTAGE DISTRIBUTION, VS = ±15V 0 -0.45 150 14 12 10 8 6 4 2 -0.30 -0.15 0 0.15 TCVOS (µV/°C) 0.30 0.45 FIGURE 5. TCVOS vs NUMBER OF AMPLIFIERS, VS = ±15V 6 0 -0.45 -0.30 -0.15 0 0.15 TCVOS (µV/°C) 0.30 0.45 FIGURE 6. TCVOS vs NUMBER OF AMPLIFIERS, VS = ±5V FN6631.1 November 16, 2009 ISL28107, ISL28207 Typical Performance Curves VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. (Continued) 200 200 VS = ± 5V VS = ±15V 100 Ib+ (pA) Ib+ (pA) 100 0 0 -100 -100 -200 -50 -25 0 25 50 75 100 125 -200 -50 150 -25 0 TEMPERATURE (°C) 80 NUMBER OF AMPLIFIERS 70 60 50 40 30 20 10 150 VS = ±5V 70 60 50 40 30 20 10 -1.8 -1.4 -1.0 -0.6 -0.2 0.2 TCIb+ (pA/°C) 0.6 0 1.0 FIGURE 9. TCIb+ vs NUMBER OF AMPLIFIERS, VS = ±15V -1.8 -1.4 -1.0 -0.6 -0.2 0.2 TCIb+ (pA/°C) 0.6 200 Vs = ± 5V VS = ± 15V 100 Ib- (pA) 100 0 0 -100 -100 -200 -50 1.0 FIGURE 10. TCIb+ vs NUMBER OF AMPLIFIERS, VS = ±5V 200 Ib- (pA) 125 80 VS = ±15V NUMBER OF AMPLIFIERS 100 FIGURE 8. POSITIVE BIAS CURRENT vs TEMPERATURE, VS = ±5V FIGURE 7. POSITIVE BIAS CURRENT vs TEMPERATURE, VS = ±15V 0 25 50 75 TEMPERATURE (°C) -25 0 25 50 75 TEMPERATURE (°C) 100 FIGURE 11. NEGATIVE BIAS CURRENT vs TEMPERATURE, VS = ±15V 7 125 150 -200 -50 -25 0 25 50 75 TEMPERATURE (°C) 100 125 150 FIGURE 12. NEGATIVE BIAS CURRENT vs TEMPERATURE, VS = ±5V FN6631.1 November 16, 2009 ISL28107, ISL28207 Typical Performance Curves 100 80 VS = ±5V NUMBER OF AMPLIFIERS 90 NUMBER OF AMPLIFIERS VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. (Continued) 80 70 60 50 40 30 20 60 50 40 30 20 10 10 0 VS = ±15V 70 -1.8 -1.4 -1.0 -0.6 -0.2 0.2 TCIb- (pA/°C) 0.6 0 1.0 -1.8 -1.4 -1.0 -0.6 -0.2 0.2 TCIb- (pA/°C) 0.6 FIGURE 14. TCIb- vs NUMBER OF AMPLIFIERS, VS = ±15V FIGURE 13. TCIb- vs NUMBER OF AMPLIFIERS, VS = ±5V 200 200 VS = ±5V 150 100 100 50 50 IOS (pA) IOS (pA) VS = ±15V 150 0 -50 0 -50 -100 -100 -150 -150 -200 -50 0 50 TEMPERATURE (°C) 100 150 FIGURE 15. OFFSET CURRENT vs TEMPERATURE, VS = ±15V -200 -50 50 TEMPERATURE (°C) 100 150 50 VS = ±15V 40 35 30 25 20 15 10 5 VS = ±5V 45 NUMBER OF AMPLIFIERS 45 NUMBER OF AMPLIFIERS 0 FIGURE 16. OFFSET CURRENT vs TEMPERATURE, VS = ±5V 50 0 1.0 40 35 30 25 20 15 10 5 -0.7 -0.5 -0.3 -0.1 0.1 0.3 TCIOS (pA/°C) 0.5 0.7 FIGURE 17. TCIOS- vs NUMBER OF AMPLIFIERS, VS = ±15V 8 0 -0.7 -0.5 -0.3 -0.1 0.1 0.3 TCIOS (pA/°C) 0.5 0.7 FIGURE 18. TCIOS- vs NUMBER OF AMPLIFIERS, VS = ±5V FN6631.1 November 16, 2009 ISL28107, ISL28207 Typical Performance Curves VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. (Continued) 180 180 Vcm = ±13V VS = ± 2.25V TO ± 20V PSRR (dB) CMRR (dB) 160 160 140 140 120 120 -50 0 50 TEMPERATURE (°C) 100 100 -50 150 0 50 100 TEMPERATURE (°C) FIGURE 20. PSRR vs TEMPERATURE FIGURE 19. CMRR vs TEMPERATURE 63000 14.4 Vs = ±15V RL = 10kΩ 53000 14.2 43000 14.0 VOH (V) AVOL (V/mV) VO = ±13V 33000 13.6 13000 13.4 0 50 TEMPERATURE (°C) 100 -13.2 13.2 -50 150 FIGURE 21. AVOL vs TEMPERATURE 14.4 50 TEMPERATURE (°C) 100 150 VS = ±15V RL = 2kΩ 14.2 -13.6 VOH (V) 14.0 -13.8 13.8 -14.0 13.6 -14.2 13.4 -14.4 -50 0 FIGURE 22. VOH vs TEMPERATURE, VS = ±15V, RL = 10kΩ VS = ±15V RL = 10kΩ -13.4 VOL (V) 13.8 23000 3000 -50 150 0 50 100 TEMPERATURE (°C) FIGURE 23. VOL vs TEMPERATURE, VS = ±15V, RL = 10kΩ 9 150 13.2 -50 0 50 100 TEMPERATURE (°C) 150 FIGURE 24. VOH vs TEMPERATURE, VS = ±15V, RL = 2kΩ FN6631.1 November 16, 2009 ISL28107, ISL28207 Typical Performance Curves -13.2 VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. (Continued) 4.4 VS = ±15V RL = 2kΩ -13.4 4.2 4.0 VOH (V) VOL (V) -13.6 -13.8 3.8 -14.0 3.6 -14.2 3.4 -14.4 -50 VS = ±5V RL = 10kΩ 0 50 100 TEMPERATURE (°C) 50 TEMPERATURE (°C) 100 150 0.40 VS = ±5V RL = 10kΩ -3.4 0 FIGURE 26. VOH vs TEMPERATURE, VS = ±5V, RL = 10kΩ FIGURE 25. VOL vs TEMPERATURE, VS = ±15V, RL = 2kΩ -3.2 3.2 -50 150 0.35 ±15V 0.30 IS (mA) VOL (V) -3.6 -3.8 ±2.25V 0.25 -4.0 0.20 -4.2 0.15 -4.4 -50 0 50 TEMPERATURE (°C) 100 0.10 -50 150 FIGURE 27. VOL vs TEMPERATURE, VS = ±5V, RL = 10kΩ 0 50 TEMPERATURE (°C) 60 ISC+ @ ±15V ISC- @ ±15V 55 55 50 50 45 45 ISC- (mA) ISC+ (mA) 150 FIGURE 28. SUPPLY CURRENT vs TEMPERATURE 60 40 35 40 35 30 30 25 25 20 -50 100 0 50 TEMPERATURE (°C) 100 150 FIGURE 29. POSITIVE SHORT CIRCUIT CURRENT vs TEMPERATURE 10 20 -50 0 50 TEMPERATURE (°C) 100 150 FIGURE 30. NEGATIVE SHORT CIRCUIT CURRENT vs TEMPERATURE FN6631.1 November 16, 2009 ISL28107, ISL28207 Typical Performance Curves VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. (Continued) 1000 INPUT NOISE VOLTAGE (nV/√Hz) INPUT NOISE VOLTAGE (nV) 200 150 100 50 0 -50 -100 V+ = ±19V RL = INF, CL = 4pF Rg = 10, Rf = 100k AV = 10,000 -150 -200 0 1 2 3 4 5 6 7 8 9 V+ = ±19V AV = 1 100 10 0.1 10 1 10 FIGURE 31. INPUT NOISE VOLTAGE 0.1Hz TO 10Hz 10k 100k 100 80 PSRR- VS = ±5V, VS = ±15V 60 PSRR (dB) INPUT NOISE CURRENT (pA/√Hz) 1k FIGURE 32. INPUT NOISE VOLTAGE SPECTRAL DENSITY 1 0.1 V+ = ±19V AV = 1 0.01 0.1 1 10 100 1k 10k 100k 40 20 R = INF L CL = 4pF 0 AV = +1 VSOURCE = 1VP-P PSRR+ VS = ±5V, VS = ±15V -20 10 100 1k 10k 100k FREQUENCY (Hz) FIGURE 34. PSRR vs FREQUENCY, VS = ±5V, ±15V 160 60 RL = INF CL = 4pF AV = +1 VCM = 1VP-P 140 120 40 +125°C 20 VOS (µV) 100 80 60 +25°C 0 -20 -40°C 40 -40 20 0 0.1 1M FREQUENCY (Hz) FIGURE 33. INPUT NOISE CURRENT SPECTRAL DENSITY CMRR (dB) 100 FREQUENCY (Hz) TIME (s) VS = ±2.25V, ±5V, ±15V 1 10 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) FIGURE 35. CMRR vs FREQUENCY, VS = ±2.25, ±5V, ±15V 11 -60 -15 -10 -5 0 5 10 15 INPUT COMMON MODE VOLTAGE FIGURE 36. INPUT OFFSET VOLTAGE vs INPUT COMMON MODE VOLTAGE, VS = ±15V FN6631.1 November 16, 2009 ISL28107, ISL28207 VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. (Continued) 200 180 160 140 PHASE 120 100 80 60 40 20 GAIN 0 -20 R = 10k L -40 CL = 10pF -60 SIMULATION -80 -100 0.1m 1m 10m 100m 1 10 100 1k 10k 100k 1M 10M 100M OPEN LOOP GAIN (dB)/PHASE (°) OPEN LOOP GAIN (dB)/PHASE (°) Typical Performance Curves 200 180 160 140 PHASE 120 100 80 60 40 20 GAIN 0 -20 R = 10k L -40 CL = 100pF -60 SIMULATION -80 -100 0.1m 1m 10m 100m 1 10 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) FREQUENCY (Hz) FIGURE 38. OPEN-LOOP GAIN, PHASE vs FREQUENCY, RL = 10kΩ, CL = 100pF FIGURE 37. OPEN-LOOP GAIN, PHASE vs FREQUENCY, RL = 10kΩ, CL = 10pF 8 70 Rg = 100, Rf = 100k AV = 1000 50 GAIN (dB) 40 AV = 100 V+ = ±20V CL = 4pF RL = 10k VOUT = 100mVP-P 30 20 AV = 10 Rg = 10k, Rf = 100k 10 0 6 Rg = 1k, Rf = 100k AV = 1 -10 Rg = OPEN, Rf = 0 -20 10 100 1k 10k 100k 1M NORMALIZED GAIN (dB) 60 4 Rf = Rg = 100k 0 Rf = Rg = 1k -2 -4 V+ = ±5V -6 RL = 10k CL = 4pF -8 AV = +2 -10 VOUT = 10mVP-P -12 1k 10M 10k FREQUENCY (Hz) NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 10M 0 -1 RL = 100k -2 -3 RL = 10k -4 RL = 1k -5 RL = 499 -9 1M 1 0 -8 100k FIGURE 40. FREQUENCY RESPONSE vs FEEDBACK RESISTANCE Rf/Rg 1 -7 Rf = Rg = 100 FREQUENCY (Hz) FIGURE 39. FREQUENCY RESPONSE vs CLOSED LOOP GAIN -6 Rf = Rg = 10k 2 V+ = ±5V CL = 4pF AV = +1 VOUT = 10mVP-P 1k 10k -1 -3 1M FREQUENCY (Hz) FIGURE 41. GAIN vs FREQUENCY vs RL 12 10M RL = 10k -4 RL = 1k -5 RL = 499 -6 -7 -8 100k RL = 100k -2 -9 V+ = ±20V CL = 4pF AV = +1 VOUT = 100mVP-P 1k 10k 100k 1M 10M FREQUENCY (Hz) FIGURE 42. GAIN vs FREQUENCY vs RL FN6631.1 November 16, 2009 ISL28107, ISL28207 Typical Performance Curves VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. (Continued) 8 1 0 CL = 334pF 4 CL = 224pF 2 CL = 104pF NORMALIZED GAIN (dB) NORMALIZED GAIN (dB) 6 0 -2 -6 -8 CL = 51pF VS = ±15V RL = 10k AV = +1 VOUT = 100mVP-P -4 1k 10k CL = 4pF -2 -3 -4 VOUT = 10mVP-P -5 VOUT = 50mVP-P -6 -7 -8 100k FREQUENCY (Hz) 1M VS = ±5V VOUT = 100mVP-P CL = 4pF AV = +1 RL = INF VOUT = 200mVP-P -91k 10M FIGURE 43. GAIN vs FREQUENCY vs CL VOUT = 500mVP-P VOUT = 1VP-P 10k 100k FREQUENCY (Hz) 1M 10M FIGURE 44. GAIN vs FREQUENCY vs OUTPUT VOLTAGE 2 140 0 120 -2 CROSSTALK (dB) NORMALIZED GAIN (dB) -1 -4 -6 VS = ±20V -8 VS = ±5V -10 C = 4pF L -12 RL = 10k AV = +1 -14 VOUT = 100mVP-P -16 1k 10k VS = ±15V VS = ±2.25V 100k FREQUENCY (Hz) 1M 80 60 RL = 10k 40 C = 4pF L AV = +1 20 VOUT = 1VP-P 0 10 10M FIGURE 45. GAIN vs FREQUENCY vs SUPPLY VOLTAGE 100 100 VS = ±5V VS = ±15V 1k 10k 100k FREQUENCY (Hz) 1M 10M FIGURE 46. CROSSTALK vs FREQUENCY, VS = ±5V, ±15V 6 2.5 2.0 V+ = ±15V CL = 4pF AV = 11 Rf = 10k, Rg = 1k VOUT = 10VP-P 2 1.5 LARGE SIGNAL (V) LARGE SIGNAL (V) 4 0 RL = 10k -2 RL = 2k VS = ±5V, ±15V, RL = 10k 1.0 0.5 VS = ±5V, ±15V, RL = 2k 0 -0.5 -1.0 CL = 4pF AV = 1 VOUT = 4VP-P -1.5 -4 -2.0 -6 0 50 100 150 200 250 300 350 400 TIME (µs) FIGURE 47. LARGE SIGNAL 10V STEP RESPONSE, VS = ±15V 13 -2.5 0 5 10 15 20 25 30 35 TIME (µs) FIGURE 48. LARGE SIGNAL TRANSIENT RESPONSE vs RL VS = ±5V, ±15V FN6631.1 November 16, 2009 ISL28107, ISL28207 VS = ±15V, VCM = 0V, RL = Open, TA = 25°C unless otherwise specified. (Continued) 0.26 0.06 0.22 0.04 0.18 VS = ±5V, ±15V, ±20V INPUT (V) 0.02 0.00 -0.02 RL = 2k, 10k CL = 4pF AV = 1 VOUT = 100mVP-P -0.04 -0.06 -0.08 0 5 10 15 30 35 0.02 INPUT INPUT (V) -0.06 -0.10 -0.18 -0.22 -0.26 -1 45 0 20 40 60 -11 14 20 40 -1 80 100 120 140 160 180 200 TIME (µs) 60 VS = ±15V RL = 10k AV = 1 VOUT = 100mVP-P 35 ER OV O SH 30 25 O H RS VE OT OO + T- 20 15 10 -13 -15 80 100 120 140 160 180 200 TIME (µs) FIGURE 51. NEGATIVE OUTPUT OVERLOAD RESPONSE TIME, VS = ±15V 1 OUTPUT 40 -3 -9 3 INPUT FIGURE 50. POSITIVE OUTPUT OVERLOAD RESPONSE TIME, VS = ±15V 50 -7 VS = ±15V RL = 10k CL = 4pF AV = 100 Rf = 10k, Rg = 100 VIN = 200mVP-P -0.14 5 1 -5 9 0.06 0 OUTPUT (V) OUTPUT 11 7 -0.06 40 13 0.10 -0.02 20 25 TIME (µs) -0.02 0.14 0.02 FIGURE 49. SMALL SIGNAL TRANSIENT RESPONSE VS = ±5V, ±15V, ±20V 0.06 15 VS = ±15V RL = 10k CL = 4pF AV = 100 Rf = 10k, Rg = 100 VIN = 200mVP-P OUTPUT (V) 0.08 OVERSHOOT (%) SMALL SIGNAL (V) Typical Performance Curves 5 0 1 10 100 1,000 CAPACITANCE (pF) 10,000 FIGURE 52. % OVERSHOOT vs LOAD CAPACITANCE, VS = ±15V FN6631.1 November 16, 2009 ISL28107, ISL28207 Applications Information Functional Description The ISL28107 and ISL28207 are single and dual, very low 1/f noise (14nV/√Hz @ 10Hz) precision op-amps. These amplifiers feature very high open loop gain (50kV/mV) for excellent CMRR (145dB), and gain accuracy. Both devices are fabricated in a new precision 40V complementary bipolar DI process. The super-beta NPN input stage with bias current cancellation provides bipolar-like levels of AC performance with the low input bias currents approaching JFET levels. The temperature stabilization provided by bias current cancellation removes the high input bias current temperature coefficient commonly found in JFET amplifiers. Figures 7 and 8 show the input bias current variation over temperature. The input offset voltage (VOS) has an very low, worst case value of 75µV max at +25°C and a maximum TC of 0.65µV/°C. Figure 36 shows VOS as a function of supply voltage and temperature with the common mode voltage at 0V for split supply operation. The complimentary bipolar output stage maintains stability driving large capacitive loads (to 10nF) without external compensation. The small signal overshoot vs. load capacitance is shown in Figure 52. Output Current Limiting The output current is internally limited to approximately ±40mA at +25°C and can withstand a short circuit to either rail as long as the power dissipation limits are not exceeded. This applies to only 1 amplifier at a time for the dual op-amp. Continuous operation under these conditions may degrade long term reliability. Output Phase Reversal Output phase reversal is a change of polarity in the amplifier transfer function when the input voltage exceeds the supply voltage. The ISL28107 and ISL28207 are immune to output phase reversal, even when the input voltage is 1V beyond the supplies. Using Only One Channel The ISL28207 is a dual op-amp. If the application only requires one channel, the user must configure the unused channel to prevent it from oscillating. The unused channel will oscillate if the input and output pins are floating. This will result in higher than expected supply currents and possible noise injection into the channel being used. The proper way to prevent this oscillation is to short the output to the inverting input and ground the positive input (as shown in Figure 53). - Operating Voltage Range The devices are designed to operate over the 4.5V (±2.25V) to 40V (±20V) range and are fully characterized at 10V (±5V) and 30V (±15V). Both DC and AC performance remain virtually unchanged over the complete 4.5V to 40V operating voltage range. Parameter variation with operating voltage is shown in the “Typical Performance Curves” beginning on page 6. The input common mode voltage range sensitivity to temperature is shown in Figure 36 (±15V). Input ESD Diode Protection The input terminals (IN+ and IN-) each have internal ESD protection diodes to the positive and negative supply rails, a series connected 500Ω current limiting resistor followed by an anti-parallel diode pair across the input NPN transistors (Circuit 1 in “Pin Descriptions” on page 2). The resistor-ESD diode configuration enables a wide differential input voltage range equal to the lesser of the Maximum Supply Voltage in the “Absolute Maximum Ratings” on page 3 (42V) or, a maximum of 0.5V beyond the V+ and V- supply voltage. The internal protection resistors eliminate the need for external input current limiting resistors in unity gain connections and other circuit applications where large voltages or high slew rate signals are present. Although the amplifier is fully protected, high input slew rates that exceed the amplifier slew rate (±0.32V/µs) may cause output distortion. 15 + FIGURE 53. PREVENTING OSCILLATIONS IN UNUSED CHANNELS Power Dissipation It is possible to exceed the +150°C maximum junction temperatures under certain load and power supply conditions. It is therefore important to calculate the maximum junction temperature (TJMAX) for all applications to determine if power supply voltages, load conditions, or package type need to be modified to remain in the safe operating area. These parameters are related using Equation 1: (EQ. 1) T JMAX = T MAX + θ JA xPD MAXTOTAL where: • PDMAXTOTAL is the sum of the maximum power dissipation of each amplifier in the package (PDMAX) • PDMAX for each amplifier can be calculated using Equation 2: V OUTMAX PD MAX = V S × I qMAX + ( V S - V OUTMAX ) × ---------------------------R L (EQ.2) FN6631.1 November 16, 2009 ISL28107, ISL28207 where: LICENSE STATEMENT • TMAX = Maximum ambient temperature The information in this SPICE model is protected under the United States copyright laws. Intersil Corporation hereby grants users of this macro-model hereto referred to as “Licensee”, a nonexclusive, nontransferable licence to use this model as long as the Licensee abides by the terms of this agreement. Before using this macro-model, the Licensee should read this license. If the Licensee does not accept these terms, permission to use the model is not granted. • θJA = Thermal resistance of the package • PDMAX = Maximum power dissipation of 1 amplifier • VS = Total supply voltage • IqMAX = Maximum quiescent supply current of 1 amplifier • VOUTMAX = Maximum output voltage swing of the application • RL = Load resistance ISL28107, ISL28207 SPICE Model Figure 54 shows the SPICE model schematic and Figure 55 shows the net list for the ISL28107, ISL28207 SPICE model. The model is a simplified version of the actual device and simulates important AC and DC parameters. AC parameters incorporated into the model are: 1/f and flatband noise, Slew Rate, CMRR, Gain and Phase. The DC parameters are VOS, IOS, total supply current and output voltage swing. The model uses typical parameters given in the “Electrical Specifications” Table beginning on page 3. The AVOL is adjusted for 155dB with the dominate pole at 0.01Hz. The CMRR is set (145dB, fcm = 100Hz). The input stage models the actual device to present an accurate AC representation. The model is configured for ambient temperature of +25°C. The Licensee may not sell, loan, rent, or license the macro-model, in whole, in part, or in modified form, to anyone outside the Licensee’s company. The Licensee may modify the macro-model to suit his/her specific applications, and the Licensee may make copies of this macro-model for use within their company only. This macro-model is provided “AS IS, WHERE IS, AND WITH NO WARRANTY OF ANY KIND EITHER EXPRESSED OR IMPLIED, INCLUDING BUY NOT LIMITED TO ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.” In no event will Intersil be liable for special, collateral, incidental, or consequential damages in connection with or arising out of the use of this macro-model. Intersil reserves the right to make changes to the product and the macro-model without prior notice. Figures 56 through 66 show the characterization vs simulation results for the Noise Voltage, Closed Loop Gain vs Frequency, Closed Loop Gain vs RL, Large Signal Step Response, Open Loop Gain Phase and Simulated CMRR vs Frequency. 16 FN6631.1 November 16, 2009 ISL28107, ISL28207 V++ V++ R3 R4 4.45k 4.45k 4 5 CASCODE Q4 C4 2pF Vin- VIN- D1 3 SUPERB SUPERB DX R1 C6 1.2pF 0.1V 7 EOS 1 IOS Mirror VCM 15pA + - 5E11 + - En In+ VIN+ Vmid 9 IEE 200E-6 R2 600 Vc + - + - Q3 R17 C5 2pF 8 5E11 25 5 Q1 Q2 24 D12 4 6 - + CASCODE Q5 2 V5 DN IEE1 96E-6 + VOS - 5E-6 V-VCM Voltage Noise Input Stage V++ V++ 10 + - 4 5 D2 DX + V1 - 1.86V G3 13 + - R5 1 D4 DX + V3 - 1.86V 11 G5 R7 2.55E10 Vg 12 - R8 G4 V2 1.86V + + - + D3 DX + V-VCM R6 1 G2 1ST Gain Stage 14 - 1.59E-3 17 R11 1 Vc Vmid Vc Vmid + - R9 1 C2 6.25pF R10 1 C3 2.55E10 V4 1.86V L1 6.25pF R12 1 G6 18 VCM D5 DX Vg + - G1 L2 1.59E-3 V-- 2nd Gain Stage Mid Supply Ref Common Mode Gain Stage V++ + - D9 DX G7 + E2 22 ISY 0.21mA Vg D6 DX 23 V5 20 1.12V V- 1.12V G8 + E3 V- V-- D10 DY + G9 + - D11 DY R16 90 + - + VOUT VOUT V6 21 + DX - D7 R15 90 - + - D8 DX V+ + V+ G10 Output Stage Supply Isolation Stage FIGURE 54. SPICE SCHEMATIC 17 FN6631.1 November 16, 2009 ISL28107, ISL28207 * source ISL28107_SPICEmodel * Revision A, October 28th 2009 LaFontaine * Model for Noise, supply currents, 145dB f=100Hz CMRR, *155dB f=0.01Hz AOL *Copyright 2009 by Intersil Corporation *Refer to data sheet “LICENSE STATEMENT” Use of *this model indicates your acceptance with the *terms and provisions in the License Statement. * Connections: +input * | -input * | | +Vsupply * | | | -Vsupply * | | | | output * | | | | | .subckt ISL28107subckt Vin+ Vin-V+ V- VOUT * source ISL28127_SPICEMODEL_0_0 * *Voltage Noise E_En IN+ VIN+ 25 0 1 R_R17 25 0 600 D_D12 24 25 DN V_V7 24 0 0.1 * *Input Stage I_IOS IN+ VIN- DC 15e-12 C_C6 IN+ VIN- 1.2E-12 R_R1 VCM VIN- 5e11 R_R2 IN+ VCM 5e11 Q_Q1 2 VIN- 1 SuperB Q_Q2 3 8 1 SuperB Q_Q3 V-- 1 7 Mirror Q_Q4 4 6 2 Cascode Q_Q5 5 6 3 Cascode R_R3 4 V++ 4.45e3 R_R4 5 V++ 4.45e3 C_C4 VIN- 0 2e-12 C_C5 8 0 2e-12 D_D1 6 7 DX I_IEE 1 V-- DC 200e-6 I_IEE1 V++ 6 DC 96e-6 V_VOS 9 IN+ 5e-6 E_EOS 8 9 VC VMID 1 * *1st Gain Stage G_G1 V++ 11 4 5 101.6828e-3 G_G2 V-- 11 4 5 101.6828e-3 R_R5 11 V++ 1 R_R6 V-- 11 1 D_D2 10 V++ DX D_D3 V-- 12 DX V_V1 10 11 1.86 V_V2 11 12 1.86 * *2nd Gain Stage G_G3 V++ VG 11 VMID 2.21e-3 G_G4 V-- VG 11 VMID 2.21e-3 R_R7 VG V++ 2.55e10 R_R8 V-- VG 2.55e10 C_C2 VG V++ 6.25e-10 C_C3 V-- VG 6.25e-10 D_D4 13 V++ DX D_D5 V-- 14 DX V_V3 13 VG 1.86 V_V4 VG 14 1.86 * *Mid supply Ref R_R9 VMID V++ 1 R_R10 V-- VMID 1 I_ISY V+ V- DC 0.21E-3 E_E2 V++ 0 V+ 0 1 E_E3 V-- 0 V- 0 1 * *Common Mode Gain Stage with Zero G_G5 V++ VC VCM VMID 5.62e-8 G_G6 V-- VC VCM VMID 5.62e-8 R_R11 VC 17 1 R_R12 18 VC 1 L_L1 17 V++ 1.59e-3 L_L2 18 V-- 1.59e-3 * *Output Stage with Correction Current Sources G_G7 VOUT V++ V++ VG 1.11e-2 G_G8 V-- VOUT VG V-- 1.11e-2 G_G9 22 V-- VOUT VG 1.11e-2 G_G10 23 V-- VG VOUT 1.11e-2 D_D6 VG 20 DX D_D7 21 VG DX D_D8 V++ 22 DX D_D9 V++ 23 DX D_D10 V-- 22 DY D_D11 V-- 23 DY V_V5 20 VOUT 1.12 V_V6 VOUT 21 1.12 R_R15 VOUT V++ 9E1 R_R16 V-- VOUT 9E1 * .model SuperB npn + is=184E-15 bf=30e3 va=15 ik=70E-3 rb=50 + re=0.065 rc=35 cje=1.5E-12 cjc=2E-12 + kf=0 af=0 .model Cascode npn + is=502E-18 bf=150 va=300 ik=17E-3 rb=140 + re=0.011 rc=900 cje=0.2E-12 cjc=0.16E-12f + kf=0 af=0 .model Mirror pnp + is=4E-15 bf=150 va=50 ik=138E-3 rb=185 + re=0.101 rc=180 cje=1.34E-12 cjc=0.44E-12 + kf=0 af=0 .model DN D(KF=6.69e-9 AF=1) .MODEL DX D(IS=1E-12 Rs=0.1) .MODEL DY D(IS=1E-15 BV=50 Rs=1) .ends ISL28107subckt FIGURE 55. SPICE NET LIST 18 FN6631.1 November 16, 2009 ISL28107, ISL28207 Characterization vs Simulation Results 1000 INPUT NOISE VOLTAGE (nV/√Hz) INPUT NOISE VOLTAGE (nV/√Hz) 1000 V+ = ±19V AV = 1 100 10 0.1 1 10 100 1k 10k 100 10 100m 100k 1.0 10 100 1k FREQUENCY (Hz) FREQUENCY (Hz) FIGURE 56. CHARACTERIZED INPUT NOISE VOLTAGE 70 Rg = 100, Rf = 100k AV = 1000 AV = 100 30 AV = 10 20 Rg = 10k, Rf = 100k 10 40 AV = 10 20 Rg = 10k, Rf = 100k AV = 1 0 -10 Rg = OPEN, Rf = 0 -20 10 100 Rg = OPEN, Rf = 0 1k 10k 100k FREQUENCY (Hz) 1M -20 10M 10 1 0 0 RL = 100k RL = 10k -4 RL = 1k -5 -6 -7 -8 -9 NORMALIZED GAIN (dB) -1 -3 RL = 499 V+ = ±20V CL = 4pF AV = +1 VOUT = 100mVP-P 1k 10k 100k FREQUENCY (Hz) 1M 10M FIGURE 60. CHARACTERIZED CLOSED LOOP GAIN vs RL 19 10k 100k 1M 10M FIGURE 59. SIMULATED CLOSED LOOP GAIN vs FREQUENCY 1 -2 1k 100 FREQUENCY (Hz) FIGURE 58. CHARACTERIZED CLOSED LOOP GAIN vs FREQUENCY NORMALIZED GAIN (dB) AV = 100 AV = 1 0 Rg = 100, Rf = 100k Rg = 1k, Rf = 100k 60 V+ = ±20V CL = 4pF RL = 10k VOUT = 100mVP-P GAIN (dB) GAIN (dB) AV = 1000 Rg = 1k, Rf = 100k 50 40 100k FIGURE 57. SIMULATED INPUT NOISE VOLTAGE 70 60 10k RL = 100k RL = 1k -2 RL = 10k -4 RL = 499 V+ = ±15V -6 CL = 4pF AV = +1 -8 VOUT = 100mVP-P -9 1k 10k 100k FREQUENCY (Hz) 1M 10M FIGURE 61. SIMULATED CLOSED LOOP GAIN vs RL FN6631.1 November 16, 2009 ISL28107, ISL28207 Characterization vs Simulation Results (Continued) 20 6 LARGE SIGNAL (V) 2 0 LARGE SIGNAL (V) V+ = ±15V CL = 4pF AV = 11 Rf = 10k, Rg = 1k VOUT = 10VP-P 4 RL = 10k -2 RL = 2k 10 OUTPUT 0 INPUT -10 -4 0 50 100 150 200 250 TIME (µs) 300 350 -20 0 400 OPEN LOOP GAIN (dB)/PHASE (°) 50 100 150 TIME (µs) 200 250 300 FIGURE 63. SIMULATED LARGE SIGNAL 10V STEP RESPONSE FIGURE 62. CHARACTERIZED LARGE SIGNAL 10V STEP RESPONSE 200 180 160 140 PHASE 120 100 80 60 40 20 GAIN 0 -20 R = 10k L -40 CL = 10pF -60 SIMULATION -80 -100 0.1m 1m 10m 100m 1 10 100 1k 10k 100k 1M 10M 100M FREQUENCY (Hz) FIGURE 64. SIMULATED OPEN-LOOP GAIN, PHASE vs FREQUENCY 200 OPEN LOOP GAIN (dB)/PHASE (°) -6 150 PHASE 100 50 0 RL = 10k CL = 10pF SIMULATION -50 1m 10m 1 GAIN 100 10K FREQUENCY (Hz) 1M 100M FIGURE 65. SIMULATED OPEN-LOOP GAIN, PHASE vs FREQUENCY CMRR (dB) 150 100 50 SIMULATION 0 1m 100m 10 1k 100k FREQUENCY (Hz) 10M 100M FIGURE 66. SIMULATED CMRR vs FREQUENCY 20 FN6631.1 November 16, 2009 ISL28107, ISL28207 Revision History The revision history provided is for informational purposes only and is believed to be accurate, but not warranted. Please go to Web to make sure you have the latest Rev. DATE REVISION CHANGE 11/10/09 FN6631.1 1. 2. 3. 4. 5. 6. 7. 6/5/09 FN6631.0 Initial Release. Updated VOS, IB, and IOS electrical specifications. Added Typical performance curves, Figures 1 through 30. Output Short Circuit Current test condition has been clarified with Note 6. Updated POD. Added Spice Model, associated text and Figures 56 through 66. Deleted old figures 6, 7, 8, 10, 11 and 12. Added Licence Statement on page 16 and referenced in spice model. Products Intersil Corporation is a leader in the design and manufacture of high-performance analog semiconductors. The Company's products address some of the industry's fastest growing markets, such as, flat panel displays, cell phones, handheld products, and notebooks. Intersil's product families address power management and analog signal processing functions. Go to www.intersil.com/products for a complete list of Intersil product families. *For a complete listing of Applications, Related Documentation and Related Parts, please see the respective device information page on intersil.com: ISL28107 and ISL28207. To report errors or suggestions for this datasheet, please go to www.intersil.com/askourstaff FITs are available from our website at http://rel.intersil.com/reports/search.php For additional products, see www.intersil.com/product_tree Intersil products are manufactured, assembled and tested utilizing ISO9000 quality systems as noted in the quality certifications found at www.intersil.com/design/quality Intersil products are sold by description only. Intersil Corporation reserves the right to make changes in circuit design, software and/or specifications at any time without notice. Accordingly, the reader is cautioned to verify that data sheets are current before placing orders. Information furnished by Intersil is believed to be accurate and reliable. However, no responsibility is assumed by Intersil or its subsidiaries for its use; nor for any infringements of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of Intersil or its subsidiaries. For information regarding Intersil Corporation and its products, see www.intersil.com 21 FN6631.1 November 16, 2009 ISL28107, ISL28207 Package Outline Drawing M8.15E 8 LEAD NARROW BODY SMALL OUTLINE PLASTIC PACKAGE Rev 0, 08/09 4 4.90 ± 0.10 A DETAIL "A" 0.22 ± 0.03 B 6.0 ± 0.20 3.90 ± 0.10 4 PIN NO.1 ID MARK 5 (0.35) x 45° 4° ± 4° 0.43 ± 0.076 1.27 0.25 M C A B SIDE VIEW “B” TOP VIEW 1.75 MAX 1.45 ± 0.1 0.25 GAUGE PLANE C SEATING PLANE 0.10 C 0.175 ± 0.075 SIDE VIEW “A 0.63 ±0.23 DETAIL "A" (0.60) (1.27) NOTES: (1.50) (5.40) 1. Dimensions are in millimeters. Dimensions in ( ) for Reference Only. 2. Dimensioning and tolerancing conform to AMSE Y14.5m-1994. 3. Unless otherwise specified, tolerance : Decimal ± 0.05 4. Dimension does not include interlead flash or protrusions. Interlead flash or protrusions shall not exceed 0.25mm per side. 5. The pin #1 identifier may be either a mold or mark feature. 6. Reference to JEDEC MS-012. TYPICAL RECOMMENDED LAND PATTERN 22 FN6631.1 November 16, 2009