Trifab Trifab VG VG (VersaGlaze (VersaGlaze )) ® ® ® ® Trifab VG 450, 451 & 451T (Thermal) Framing Systems & Trifab®VG 450, 451 & 451T (Thermal) Framing Systems Trifab 451UT (Ultra Thermal) Framing System ® Design Design Versatility + Performance with Unmatched Versatility with Unmatched Fabrication Fabrication Flexibility Flexibility Preston Pointe, Louisville, KY Architect: Potter & Associates Architects PLLC, Louisville, KY Glazing Contractor: Kentucky Mirror & Plate Glass Company, Louisville, KY Trifab® VG (VersaGlaze®) is built on the proven and successful Trifab® platform – with all the versatility its name implies. There are enough framing system choices, fabrication methods, design options and performance levels to please the most discerning building owner, architect and installer. The Trifab® VG family’s newest addition, Trifab® 451UT (Ultra Thermal) framing system, is designed for the most demanding thermal performance and employs a “dual” Isolock® Thermal Break. Aesthetics Trifab® VG framing systems offer designers a choice of front-, center-, back- or multi-plane glass applications. Structural silicone glazing (SSG) and Weatherseal glazing options further expand the designers’ choices, allowing for a greater range of design possibilities for specific project requirements and architectural styles. All systems have a 4-1/2" frame depth – Trifab® VG 450 has 1-3/4" sightlines, while Trifab® VG 451/451T and Trifab® 451UT have 2" sightlines. With seamless incorporation of Kawneer entrances or windows, including GLASSvent® visually frameless ventilators, Trifab® VG can be used on almost any project. These framing systems can also be packaged with Kawneer curtain walls and overhead glazing, thereby providing a full range of proven, and tested, quality products for the owner, architect and installer from a single source supplier. Performance Kawneer’s Isolock® Thermal Break process creates a composite section, prevents dry shrinkage and is available on Trifab® VG 451T. For even greater thermal performance, a “dual” Isolock® Thermal Break is used on Trifab® 451UT. Economy Trifab® VG 450, 451 and 451T framing systems offer four fabrication choices to suit your project (Trifab® 451UT available as screw spline fabrication only): • Screw Spline – for economical continuous runs utilizing two piece vertical members that provide the option to pre-assemble units with controlled shop labor costs and smaller field crews for handling and installation. • Shear Block – for punched openings or continuous runs using tubular moldings with shear block clips that provide tight joints for transporting large pre-assembled multi-lite units. • Stick – for fast, easy field fabrication. Field measurements and material cuts can be done when metal is on the job. • Type B – Same fabrication benefits as shear block except head and sill run through. All systems can be flush glazed from either the inside or outside. The Weatherseal option provides an alternative to SSG vertical mullions for Trifab® VG 450, 451 and 451T. This ABS/ASA rigid polymer extrusion allows complete inside glazing and creates a flush glass appearance on the building exterior without the added labor of scaffolding or swing stages. Additionally, High-Performance (HP) Flashing options are Brighton Landing, Cambridge, MA engineered to eliminate Architects: ADD Inc., Cambridge, MA perimeter sill fasteners and Glazing Contractors: Ipswich Bay associated blind seals. Glass Company, Inc., Rowley, MA Finishes Architectural Class I anodized aluminum finishes are available in clear and Permanodic® color choices. Painted finishes, including fluoropolymer that meet or exceed AAMA 2605, are offered in many standard choices and an unlimited number of specially-designed colors. Trifab® 451UT uses a “dual” Isolock® Thermal Break (right) and features a new HP (High Performance) sill design, which incorporates a screwapplied end dam (left), ensuring positive engagement and tight joints between the sill flashing and end dam. U-factor, CRF values and STC ratings for Trifab® VG vary depending upon the glass plane application. Project specific U-factors can be determined for each individual project. (See the Kawneer Architectural Manual or Kawneer.com for additional information). Thermal simulations showing temperature variations from exterior/cold side to interior/warm side. Trifab® VG 451 Trifab® VG 451T Performance Test Standards Air Performance Water Structural Thermal Thermal Break Acoustical Trifab® 451UT ASTM E 283 AAMA 501 and ASTM E 331 ASTM E 330 AAMA 1503 AAMA 505 and AAMA TIR-A8 AAMA 1801 and ASTM E 1425 Trifab® VG 450, 451 and 451T glazing options (note: Trifab® 451UT available as center set glass plane only). Solvent-free powder coatings add the “green” element with high performance, durability and scratch resistance that meet the standards of AAMA 2604. Front Kawneer Company, Inc. Technology Park / Atlanta 555 Guthridge Court Norcross, GA 30092 © Kawneer Company, Inc. 2010 kawneer.com 770 . 449 . 5555 LITHO IN U.S.A. Form No. 07-2007-06.10 Center Back SSG Weatherseal Multi-Plane TRIFAB® 451UT FEBRUARY, 2012 EC 97911-37 Features TRIFAB® 451UT is 4-1/2" deep with a 2" sightline Center Plane glass applications Flush glazed from either the inside or outside Screw Spline fabrication Dual Isolock® lanced and debridged thermal break Infill options up to 1-1/8" thickness Permanodic® anodized finishes in 7 choices Painted finishes in standard and custom choices Optional Features • High performance sill flashing • Acoustical rating per AAMA 1801 and ASTM E 1425 • Project specific U-factors (See Thermal Charts) Product Applications • • • • Storefront, Ribbon Window or Punched Openings Single-span Integrated entrance framing allowing Kawneer standard entrances or other specialty entrances to be incorporated Kawneer windows or GLASSvent ® are easily incorporated © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. • • • • • • • • For specific product applications, Consult your Kawneer representative. kawneer.com 1 kawneer.com © Kawneer Company, Inc., 2012 BLANK PAGE Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. TRIFAB® 451UT Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 2 FEBRUARY, 2012 EC 97911-37 FEBRUARY, 2012 EC 97911-37 3 INDEX (CENTER) BASIC FRAMING DETAILS (CENTER - Outside Glazed)................. 4 BASIC FRAMING DETAILS (CENTER - Inside Glazed).................... 5 MISCELLANEOUS FRAMING (CENTER).......................................... 6 CURVING & TRIM DETAILS................................................................ 7 260 INSULCLAD ENTRANCE DETAILS ............................................ 8 STOREFRONT GLASSvent ® DETAILS.............................................. 9 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. STOREFRONT GLASSvent ® HARDWARE...................................... 10 8225TL VENT .................................................................................... 11 WINDLOAD / DEADLOAD CHARTS ........................................... 12-15 THERMAL CHARTS .................................................................... 16-22 © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. TRIFAB® 451UT kawneer.com 452T-CG-001 5 2 3 2" (50.8) 2" (50.8) 4 JAMB 5 VERTICAL DUAL ISOLOCK THERMAL BREAK SCREW SPLINE 452T-CG-126 452T-CG-001 451T-CG-002 451-CG-004 2 HORIZONTAL 451-CG-004 3 SILL 452T-CG-021 4-1/2" (114.3) 452T-CG-014 452T-CG-037 kawneer.com © Kawneer Company, Inc., 2012 BASIC FRAMING DETAILS (CENTER - Outside Glazed) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. TRIFAB® 451UT Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 1 HEAD 2" (50.8) ELEVATION IS NUMBER KEYED TO DETAILS 2" (50.8) 4 2" (50.8) SCALE 3" = 1'-0" 1/2" (12.7) 452T-CG-126 4-1/2" (114.3) 4 FEBRUARY, 2012 EC 97911-37 1 452T-CG-001 4-1/2" (114.3) 1/2" (12.7) © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 4 1 HEAD 452T-CG-001 kawneer.com 2 HORIZONTAL 2" (50.8) 2" (50.8) 4 JAMB 5 VERTICAL 3 SILL 2" (50.8) SCALE 3" = 1'-0" 2" (50.8) EC 97911-37 2" (50.8) 452T-CG-126 4-1/2" (114.3) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FEBRUARY, 2012 TRIFAB® 451UT 452T-CG-003 452T-CG-011 451-CG-004 5 BASIC FRAMING DETAILS (CENTER - Inside Glazed) 1 5 2 3 ELEVATION IS NUMBER KEYED TO DETAILS DUAL ISOLOCK THERMAL BREAK SCREW SPLINE 452T-CG-126 451-CG-004 4-1/2" (114.3) 452T-CG-001 451T-CG-002 451-CG-004 4-1/2" (114.3) 452T-CG-014 452T-CG-037 TRIFAB® 451UT FEBRUARY, 2012 MISCELLANEOUS FRAMING (CENTER) EC 97911-37 452T-CG-013 451T-CG-002 451T-CG-002 451T-CG-002 450-110 STEEL REINFORCING 2-1/4" (57.2) 2" (50.8) 2" (50.8) 2-1/4" MULLION W/ STEEL MEDIUM WEIGHT MULLION HEAVY WEIGHT MULLION 452T-CG-010 452T-CG-540 452T-CG-010 452T-CG-540 400-110 STEEL REINFORCING 2-1/2" (63.5) 2-1/2" (63.5) TUBULAR EXPANSION MULLION TUBULAR EXPANSION MULLION WITH OPTIONAL STEEL kawneer.com © Kawneer Company, Inc., 2012 452T-CG-012 452T-CG-112 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. SCALE 3" = 1'-0" Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 6 TRIFAB® 451UT FEBRUARY, 2012 EC 97911-37 CURVING & TRIM DETAILS SCALE 3" = 1'-0" Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1 1 2" (50.8) TYPICAL CAD Details - SCREW SPLINE (TF451) = TF_VG_451-SS-Center--CAD.zip (TF451T)= TF_VG_451T-SS-Center--CAD.zip 175-186 3 175-188 175-187 4-1/2" (114.3) TYPICAL 2 CURVING DETAILS (Center Plane Only) 2 175-190 175-190 175-186 175-191 3 BRAKE METAL FILLERS 069-271 STOOL TRIM STOOL TRIM CLIP WITH HIGH PERFORMANCE FLASHING 451T-VG-150 Seal over Stool Trim fasteners to prevent water infiltration. BRAKE METAL ADAPTOR AT HORIZONTAL © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 451T-VG-150 BRAKE METAL FILLERS 451T-VG-150 451T-VG-150 BRAKE METAL ADAPTOR AT VERTICAL kawneer.com 7 3/32" (2.4) 2" (50.8) 2-1/8" (54.0) 2-3/16" (55.6) 9/16" (14.3) Door Opening DOOR JAMB 4 TYP . 2 BOTTOM RAIL 3 2-1/4" (57.2) 2 452T-CG-126 5 452T-CG-001 4-1/2" (114.3) 3 2-1/8" (54.0) 1/8" (3.2) MEETING STILES 5 260 INSULCLAD® DOOR kawneer.com Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 1/8" (3.2) 260 INSULCLAD ENTRANCE DETAILS © Kawneer Company, Inc., 2012 NOTE: Butt Hung or Offset Pivot Doors Only. TRANSOM BAR 3-7/8" (98.4) ELEVATION IS NUMBER KEYED TO DETAILS. 2" (50.8) TRIFAB® 451UT Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 11/16" (17.5) 4 2" (50.8) 1 Door Opening HEAD Door Opening 8 FEBRUARY, 2012 EC 97911-37 SCALE 3" = 1'-0" TRIFAB® VG 451T CENTER FRAMING SHOWN. OTHER FRAMING OPTIONS AVAILABLE. CONSULT YOUR KAWNEER REPRESENTATIVE. 1 TRIFAB® 451UT FEBRUARY, 2012 EC 97911-37 9 STOREFRONT GLASSvent ® DETAILS SCALE 3" = 1'-0" Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. TRIFAB® 451UT FRAMING SHOWN. OTHER FRAMING OPTIONS AVAILABLE. CONSULT YOUR KAWNEER REPRESENTATIVE. OUTSWING CASEMENT VERTICAL SECTION PROJECT-OUT VERTICAL SECTION 452T-CG-126 452T-CG-001 1 452T-CG-001 1 452T-CG-126 3 5 6 469-407 2 3 7 8 4 ELEVATION IS NUMBER KEYED TO DETAILS 469-407 469-407 451-CG-004 451-CG-004 4 2 452T-CG-037 452T-CG-014 OUTSWING CASEMENT HORIZONTAL SECTION PROJECT-OUT HORIZONTAL SECTION 452T-CG-001 452T-CG-001 452T-CG-001 452T-CG-001 451T-CG-002 469-407 469-407 469-407 451T-CG-002 469-407 451T-CG-002 452T-CG-126 5 © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 452T-CG-021 6 7 NOTE: Bronze spacer is recommended when 1" insulating glass is used. MAXIMUM / MINIMUM SIZES (1" INFILL) PROJECT-OUT MAXIMUM 60" x 36" MINIMUM 14" x 14" OUTSWING CASEMENT MAXIMUM 36" x 60" MINIMUM 14" x 14" kawneer.com 8 TRIFAB® 451UT FEBRUARY, 2012 STOREFRONT GLASSvent HARDWARE EC 97911-37 ® STOREFRONT GLASSvent ® HARDWARE SELECTION GUIDE PROJECT - OUT OUTSWING CASEMENT Stainless steel 4-bar hinge STANDARD STANDARD Cast white bronze cam lock STANDARD STANDARD Cast white bronze cam lock with pole ring OPTIONAL OPTIONAL Cast white bronze custodial lock with removable handle OPTIONAL OPTIONAL Cast white bronze concealed lock with removable hex key OPTIONAL OPTIONAL Cast white bronze pole/pull ring OPTIONAL Pivot-shoe roto-operator OPTIONAL OPTIONAL OPTIONAL Insect screen CAM LOCK REMOVABLE HANDLE CONCEALED LOCK CAM LOCK WITH POLE RING PULL RING PIVOT SHOE ROTO-OPERATOR INSECT SCREEN WITH STANDARD WICKET OPTIONAL CUSTODIAL LOCK STAINLESS STEEL 4 BAR HINGES INSECT SCREEN WITH FULL WICKET kawneer.com © Kawneer Company, Inc., 2012 Multi-point lock with cast white bronze locking handle Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. DESCRIPTION Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 10 © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FEBRUARY, 2012 kawneer.com TRIFAB® 451UT EC 97911-37 8225TL VENT SCALE 3" = 1'-0" PROJECT-OUT VERTICAL SECTION 452T-CG-021 1 451-CG-004 8225T•L VENTS SHOWN NOTE: OTHER VENT TYPES CAN BE ACCOMMODATED, CONSULT YOUR KAWNEER REPRESENTATIVE FOR OTHER OPTIONS 469-407 1 3 452T-CG-021 452T-CG-001 451T-CG-002 469-407 3 4 2 ELEVATION IS NUMBER KEYED TO DETAILS 469-407 2 451-CG-004 PROJECT-OUT HORIZONTAL SECTION 452T-CG-001 469-407 451T-CG-002 4 11 12 TRIFAB® 451UT WIND LOAD / DEADLOAD CHARTS FEBRUARY, 2012 EC 97911-37 DEADLOAD CHARTS Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1/4" (6.35) thick glass supported on two setting blocks placed at the loading points shown. kawneer.com © Kawneer Company, Inc., 2012 Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4" above 13'-6". These curves are for mullions WITH and WITHOUT HORIZONTALS and are based on engineering calculations for stress and deflection. Allowable wind load stress for ALUMINUM 15,152 p.s.i. (104MPa), STEEL 30,000 p.s.i. (207MPa.). Charted curves, in all cases are for the limiting value. A 4/3 increase in allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact your Kawneer representative for additional information. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. WIND LOAD CHARTS TRIFAB® 451UT FEBRUARY, 2012 EC 97911-37 WINDLOAD CHARTS A = 15 PSF (720 Pa) B = 20 PSF (960 Pa) C = 25 PSF (1200 Pa) D = 30 PSF (1440 Pa) E = 40 PSF (1920 Pa) WIDTH IN METERS 1.0 2.0 15 1.0 14 10 3.0 9 8 A B 7 6 2.0 C D E 5 452T-CG-001 3 4 5 6 7 8 WIDTH IN FEET 10 3.0 9 7 A B C D 6 E 8 1 2 3 4 5 6 7 8 WIDTH IN FEET WIDTH IN METERS WIDTH IN METERS 2.0 1.0 2.0 15 14 14 3.0 9 HEIGHT IN FEET 10 HEIGHT IN METERS 11 7 A B C 6 D 452T-CG-010 / 452T-CG-009 5 E WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-8 AND AAMA 505 8 2 3 4 5 6 7 WIDTH IN FEET B 10 C D E 9 8 5 4 1 2 3 4 5 6 7 8 WIDTH IN FEET WITHOUT HORIZONTALS WIDTH IN METERS WIDTH IN METERS 1.0 2.0 14 14 13 13 11 10 3.0 9 A 8 B 7 C 6 D E 5 4 4 5 6 WIDTH IN FEET 7 8 2.0 HEIGHT IN FEET 12 HEIGHT IN METERS 4.0 3 2.0 15 15 2 3.0 2.0 6 WITH HORIZONTALS 1.0 1 A 11 7 2.0 8 12 452T-CG-012 WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-8 AND AAMA 505 4.0 12 11 A 10 9 3.0 B C D E 8 7 2.0 6 5 4 1 2 3 4 5 6 WIDTH IN FEET 7 8 HEIGHT IN METERS 1 4.0 13 HEIGHT IN METERS 4.0 12 kawneer.com 2.0 4 15 HEIGHT IN FEET 11 WITHOUT HORIZONTALS 1.0 HEIGHT IN FEET 12 WITH HORIZONTALS 4 © Kawneer Company, Inc., 2012 4.0 5 WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-8 AND AAMA 505 4 2 HEIGHT IN FEET 11 2.0 15 13 HEIGHT IN METERS 12 13 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. WIDTH IN METERS 4.0 13 HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 14 WITHOUT HORIZONTALS HEIGHT IN METERS WITH HORIZONTALS 1 13 TRIFAB® 451UT FEBRUARY, 2012 WINDLOAD CHARTS EC 97911-37 A = 15 PSF (720 Pa) B = 20 PSF (960 Pa) C = 25 PSF (1200 Pa) D = 30 PSF (1440 Pa) E = 40 PSF (1920 Pa) 2.0 15 14 1.0 14 10 A 9 3.0 B 8 C D 7 6 2.0 E 2 3 4 5 6 7 8 WIDTH IN FEET B C D 9 8 3.0 E 2.0 5 4 1 2 3 4 5 6 7 8 WIDTH IN FEET WITHOUT HORIZONTALS WIDTH IN METERS WIDTH IN METERS 2.0 1.0 15 2.0 15 14 14 10 3.0 9 8 A 7 B 6 C D E 5 2.0 452T-CG-112 3 4 5 6 7 8 WIDTH IN FEET 11 10 7 A B C D 6 E 8 1 2 3 4 5 6 7 8 WIDTH IN FEET WITHOUT HORIZONTALS WIDTH IN METERS WIDTH IN METERS 1.0 2.0 14 14 13 13 11 10 B 9 8 3.0 C 7 D 6 E 5 4 4 5 6 WIDTH IN FEET 7 8 2.0 HEIGHT IN FEET A 12 HEIGHT IN METERS 4.0 3 2.0 15 15 2 2.0 4 WITH HORIZONTALS 1.0 1 3.0 9 452T-CG-112 with 450-110 STEEL WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-8 AND AAMA 505 A 12 4.0 B 11 10 C 9 D 8 3.0 E 7 2.0 6 HEIGHT IN METERS 2 12 5 WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-8 AND AAMA 505 4 1 HEIGHT IN FEET 11 HEIGHT IN METERS 12 4.0 13 HEIGHT IN METERS 4.0 13 HEIGHT IN FEET A 10 WITH HORIZONTALS 1.0 HEIGHT IN FEET 11 6 WINDLOAD CHARTS ARE BASED ON COMPOSITE PROPERTIES WHICH ARE CALCULATED IN ACCORDANCE WITH AAMA TIR-8 AND AAMA 505 4 12 7 452T-CG-013 5 1 HEIGHT IN FEET 11 4.0 13 HEIGHT IN METERS 12 2.0 15 4.0 13 HEIGHT IN FEET WIDTH IN METERS 5 4 1 2 3 4 5 6 7 8 WIDTH IN FEET kawneer.com © Kawneer Company, Inc., 2012 1.0 WITHOUT HORIZONTALS Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. WIDTH IN METERS Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. WITH HORIZONTALS HEIGHT IN METERS 14 HEIGHT IN FEET © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 10 kawneer.com 7 8 6 2.0 5 3 4 1.0 2 1 0 1 1 2 2 3 3 4 4 5 5 6 1.0 7 10 7 8 6 2.0 5 4 3 1.0 2 1 0 C B A WIDTH IN FEET 6 7 8 HEIGHT IN METERS 1.0 HEIGHT IN METERS HEIGHT IN FEET Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FEBRUARY, 2012 TRIFAB® 451UT EC 97911-37 DEADLOAD CHARTS A = (1/4 POINT LOADING) B = (1/6 POINT LOADING) C = (1/8 POINT LOADING) WITH HORIZONTALS WIDTH IN METERS 11 2.0 9 3.0 452T-CG-011 C B A WIDTH IN FEET 8 WITH HORIZONTALS WIDTH IN METERS 11 2.0 9 3.0 452T-CG-021 15 TRIFAB® 451UT FEBRUARY, 2012 EC 97911-37 THERMAL CHARTS Project Specific U-factor Example Calculation 15'-8" 2'-0" 9'-6" 7'-0" Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 5'-0" Example Glass U-factor= 0.42 Btu/hr·ft2·oF Total Daylight Opening = 3(5' x 7') + 3(5' x 2') = 135ft2 Total Projected Area = (Total Daylight Opening + Total Area of Framing System) = 15'-8" x 9'-6" = 148.83ft2 Percent of Glass = (Total Daylight Opening ÷ Total Projected Area) = (135 ÷ 148.83)100 = 91% System U-factor vs Percent of Glass Area 0.80 0.70 X E 0.65 0.60 A COG U-factor 0.55 M 0.48 0.46 0.44 0.42 0.40 0.38 0.36 0.34 0.32 0.30 0.28 0.26 0.24 0.22 0.20 0.50 P 0.49 0.45 L E 0.40 0.35 0.30 0.25 70 75 80 90 91% 85 0.20 Percent of Glass Based on 91% glass and center of glass (COG) U-factor of 0.42 System U-factor is equal to 0.49 Btu/hr x ft2 x oF kawneer.com © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 0.75 95 16 © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. COG U-factor 0.48 (2.73) 0.46 (2.61) 0.44 (2.50) 0.42 (2.39) 0.40 (2.27) kawneer.com System U-Factor (Btu/h·ft2·°F) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FEBRUARY, 2012 TRIFAB® 451UT EC 97911-37 THERMAL CHARTS Note: Values in parentheses are metric. COG=Center of Glass. Charts are generated per AAMA 507. System U-Factor for Vision Glass 0.38 (2.16) 0.36 (2.05) 0.34 (1.93) 0.32 (1.82) 0.30 (1.71) 0.28 (1.59) 0.26 (1.48) 0.24 (1.37) 0.22 (1.25) 0.20 (1.14) Vision Area / Total Area (%) 17 COG SHGC Vision Area / Total Area (%) COG VT System Visible Transmittance (VT) vs Percent of Vision Area Vision Ares / Total Area (%) Charts are generated per AAMA 507. kawneer.com © Kawneer Company, Inc., 2012 THERMAL CHARTS Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. System SHGC TRIFAB® 451UT Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. System VT 18 FEBRUARY, 2012 EC 97911-37 System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area Charts are generated per AAMA 507. TRIFAB® 451UT FEBRUARY, 2012 EC 97911-37 THERMAL PERFORMANCE MATRIX (NFRC SIZE) Glass U-Factor 3 Overall U-Factor 4 0.48 0.52 0.46 0.51 0.44 0.49 0.42 0.48 0.40 0.46 0.38 0.44 0.36 0.43 0.34 0.41 0.32 0.39 0.30 0.38 0.28 0.36 0.26 0.35 0.24 0.33 0.22 0.31 0.20 0.30 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.66 0.75 0.66 0.70 0.62 0.70 0.61 0.65 0.58 0.65 0.57 0.60 0.53 0.60 0.53 0.55 0.49 0.55 0.48 0.50 0.45 0.50 0.44 0.45 0.40 0.45 0.39 0.40 0.36 0.40 0.35 0.35 0.31 0.35 0.31 0.30 0.27 0.30 0.26 0.25 0.23 0.25 0.22 0.20 0.18 0.20 0.18 0.15 0.14 0.15 0.13 0.10 0.09 0.10 0.09 0.05 0.05 0.05 0.04 © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. Thermal Transmittance 1 (BTU/hr • ft 2 • °F) NOTE: For glass values that are not listed, linear interpolation is permitted. 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with NFRC 200. 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4"). kawneer.com 19 System U-Factor for Vision Glass 0.48 (2.73) 0.46 (2.61) 0.44 (2.50) 0.42 (2.39) Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. THERMAL CHARTS - WITH STEEL 0.40 (2.27) 0.38 (2.16) 0.36 (2.05) 0.34 (1.93) 0.32 (1.82) 0.30 (1.71) 0.28 (1.59) 0.26 (1.48) 0.24 (1.37) 0.22 (1.25) 0.20 (1.14) Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. TRIFAB® 451UT Vision Area / Total Area (%) kawneer.com © Kawneer Company, Inc., 2012 COG U-factor System U-Factor (Btu/h·ft2·°F) 20 FEBRUARY, 2012 EC 97911-37 Note: Values in parentheses are metric. COG=Center of Glass. Charts are generated per AAMA 507. System VT © Kawneer Company, Inc., 2012 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. System SHGC Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. FEBRUARY, 2012 kawneer.com TRIFAB® 451UT EC 97911-37 COG SHGC Vision Ares / Total Area (%) Charts are generated per AAMA 507. 21 THERMAL CHARTS - WITH STEEL System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area Vision Area / Total Area (%) Charts are generated per AAMA 507. COG VT System Visible Transmittance (VT) vs Percent of Vision Area TRIFAB® 451UT FEBRUARY, 2012 EC 97911-37 THERMAL PERFORMANCE MATRIX (NFRC SIZE) - WITH STEEL Thermal Transmittance 1 (BTU/hr • ft • °F) Overall U-Factor 4 0.48 0.57 0.46 0.56 0.44 0.54 0.42 0.53 0.40 0.51 0.38 0.49 0.36 0.48 0.34 0.46 0.32 0.45 0.30 0.43 0.28 0.41 0.26 0.40 0.24 0.38 0.22 0.36 0.20 0.35 SHGC Matrix 2 Visible Transmittance 2 Glass SHGC 3 Overall SHGC 4 Glass VT 3 Overall VT 4 0.75 0.66 0.75 0.65 0.70 0.62 0.70 0.61 0.65 0.58 0.65 0.57 0.60 0.53 0.60 0.52 0.55 0.49 0.55 0.48 0.50 0.45 0.50 0.44 0.45 0.40 0.45 0.39 0.40 0.36 0.40 0.35 0.35 0.32 0.35 0.30 0.30 0.27 0.30 0.26 0.25 0.23 0.25 0.22 0.20 0.19 0.20 0.17 0.15 0.14 0.15 0.13 0.10 0.10 0.10 0.09 0.05 0.05 0.05 0.04 NOTE: For glass values that are not listed, linear interpolation is permitted. 1. U-Factors are determined in accordance with NFRC 100. 2. SHGC and VT values are determined in accordance with NFRC 200. 3. Glass properties are based on center of glass values and are obtained from your glass supplier. 4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of 2000mm wide by 2000mm high (78-3/4" by 78-3/4"). kawneer.com © Kawneer Company, Inc., 2012 Glass U-Factor 3 Laws and building and safety codes governing the design and use of glazed entrance, window, and curtain wall products vary widely. Kawneer does not control the selection of product configurations, operating hardware, or glazing materials, and assumes no responsibility therefor. 2 Kawneer reserves the right to change configuration without prior notice when deemed necessary for product improvement. 22