Trifab VG 450 Framing

Trifab
Trifab VG
VG (VersaGlaze
(VersaGlaze ))
®
®
®
®
Trifab VG 450, 451 & 451T (Thermal) Framing Systems &
Trifab®VG 450, 451 & 451T (Thermal) Framing Systems
Trifab 451UT (Ultra Thermal) Framing System
®
Design
Design Versatility
+ Performance
with
Unmatched
Versatility with Unmatched
Fabrication
Fabrication Flexibility
Flexibility
Preston Pointe, Louisville, KY
Architect: Potter & Associates Architects PLLC, Louisville, KY
Glazing Contractor: Kentucky Mirror & Plate Glass Company, Louisville, KY
Trifab® VG (VersaGlaze®) is built on the proven and successful Trifab®
platform – with all the versatility its name implies. There are enough
framing system choices, fabrication methods, design options and
performance levels to please the most discerning building owner,
architect and installer. The Trifab® VG family’s newest addition,
Trifab® 451UT (Ultra Thermal) framing system, is designed for the
most demanding thermal performance and employs a “dual” Isolock®
Thermal Break.
Aesthetics
Trifab® VG framing systems offer designers a choice of front-, center-,
back- or multi-plane glass applications. Structural silicone glazing (SSG)
and Weatherseal glazing options further expand the designers’ choices,
allowing for a greater range of design possibilities for specific project
requirements and architectural styles. All systems have a 4-1/2" frame
depth – Trifab® VG 450 has 1-3/4" sightlines, while Trifab® VG 451/451T
and Trifab® 451UT have 2" sightlines.
With seamless incorporation of Kawneer entrances or windows,
including GLASSvent® visually frameless ventilators, Trifab® VG can be
used on almost any project. These framing systems can also be
packaged with Kawneer curtain walls and overhead glazing, thereby
providing a full range of proven, and tested, quality products for the
owner, architect and installer from a single source supplier.
Performance
Kawneer’s Isolock® Thermal Break process creates a composite section,
prevents dry shrinkage and is available on Trifab® VG 451T. For even
greater thermal performance, a “dual” Isolock® Thermal Break is used
on Trifab® 451UT.
Economy
Trifab® VG 450, 451 and 451T framing systems offer four fabrication
choices to suit your project (Trifab® 451UT available as screw spline
fabrication only):
• Screw Spline – for economical continuous runs utilizing two piece
vertical members that provide the option to pre-assemble units
with controlled shop labor costs and smaller field crews for
handling and installation.
• Shear Block – for punched openings or continuous runs using
tubular moldings with shear block clips that provide tight joints for
transporting large pre-assembled multi-lite units.
• Stick – for fast, easy field fabrication. Field measurements and
material cuts can be done when metal is on the job.
• Type B – Same fabrication benefits as shear block except head and
sill run through.
All systems can be flush glazed from either the inside or outside.
The Weatherseal option provides an alternative to SSG vertical
mullions for Trifab® VG 450,
451 and 451T. This ABS/ASA
rigid polymer extrusion allows
complete inside glazing and
creates a flush glass appearance
on the building exterior
without the added labor of
scaffolding or swing stages.
Additionally, High-Performance
(HP) Flashing options are
Brighton Landing, Cambridge, MA
engineered
to
eliminate
Architects: ADD Inc., Cambridge, MA
perimeter sill fasteners and
Glazing Contractors: Ipswich Bay
associated blind seals.
Glass Company, Inc., Rowley, MA
Finishes
Architectural Class I anodized aluminum finishes are available in clear
and Permanodic® color choices.
Painted finishes, including fluoropolymer that meet or exceed AAMA
2605, are offered in many standard choices and an unlimited number
of specially-designed colors.
Trifab® 451UT uses a “dual” Isolock® Thermal Break (right) and features
a new HP (High Performance) sill design, which incorporates a screwapplied end dam (left), ensuring positive engagement and tight joints
between the sill flashing and end dam.
U-factor, CRF values and STC ratings for Trifab® VG vary depending upon
the glass plane application. Project specific U-factors can be determined
for each individual project. (See the Kawneer Architectural Manual or
Kawneer.com for additional information).
Thermal simulations showing temperature variations from exterior/cold
side to interior/warm side.
Trifab® VG 451
Trifab® VG 451T
Performance Test Standards
Air Performance
Water
Structural
Thermal
Thermal Break
Acoustical
Trifab® 451UT
ASTM E 283
AAMA 501 and ASTM E 331
ASTM E 330
AAMA 1503
AAMA 505 and AAMA TIR-A8
AAMA 1801 and ASTM E 1425
Trifab® VG 450, 451 and 451T glazing options
(note: Trifab® 451UT available as center set glass plane only).
Solvent-free powder coatings add the “green” element with high
performance, durability and scratch resistance that meet the
standards of AAMA 2604.
Front
Kawneer Company, Inc.
Technology Park / Atlanta
555 Guthridge Court
Norcross, GA 30092
© Kawneer Company, Inc. 2010
kawneer.com
770 . 449 . 5555
LITHO IN U.S.A.
Form No. 07-2007-06.10
Center
Back
SSG
Weatherseal Multi-Plane
TRIFAB® VG 450
JANUARY, 2009
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-07
FEATURES
Features
s Trifab® VG 450 is 4-1/2" deep with a 1-3/4" sight line
s Front, Center, Back or Multi-Plane glass applications
s Flush glazed from either the inside or outside
s Screw Spline, Shear Block, Stick or Type-B fabrication
s SSG / Weatherseal option
s 1/8", 1/4" or 3/8" infill options
s Permanodic® anodized finishes in 7 choices
s Painted finishes in standard and custom choices
Optional Features
s High performance interlocking flashing
Product Applications
specialty entrances to be incorporated
s Kawneer Sealair® windows or GLASSvent™ are easily incorporated
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
s Storefront, Ribbon Window or Punched Openings
s Single-span
s Integrated entrance framing allowing Kawneer standard entrances or other
For specific product applications,
Consult your Kawneer representative.
kawneer.com
1
kawneer.com
© Kawneer Company, Inc., 2009
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
JANUARY, 2009
EC 97911-07
TRIFAB® VG 450
JANUARY, 2009
INDEX
PICTORIAL VIEWS ........................................................................................ 5-9
CENTER ......................................................................................................... 11
FRONT ........................................................................................................... 23
BACK ............................................................................................................... 39
MULTI-PLANE ................................................................................................. 47
CHARTS (WINDLOAD, DEADLOAD, END REACTION & THERMAL) ..................... 55-73
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED
ENTRANCE, WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT
CONTROL THE SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR
GLAZING MATERIALS, AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference.
Numbers in parentheses (
) are millimeters unless otherwise noted.
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-07
3
The following metric (SI) units are found in these details:
m – meter
cm – centimeter
mm – millimeter
s – second
Pa – pascal
MPa – megapascal
Kawneer reserves the right to change configurations without prior notice when deemed necessary
for product improvement.
kawneer.com
kawneer.com
© Kawneer Company, Inc., 2009
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
JANUARY, 2009
EC 97911-07
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
5
PICTORIAL VIEW (CENTER)
THE SHEAR BLOCK SYSTEM OF FABRICATION ALLOWS A FRAME
TO BE PRE-ASSEMBLED AND INSTALLED AS A SINGLE UNIT.
HORIZONTALS ARE ATTACHED TO THE VERTICALS WITH SHEAR
BLOCKS.
SCREW SPLINE
ASSEMBLY
SHEAR BLOCK
ASSEMBLY
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
THE SPLIT VERTICAL IN THE SCREW SPLINE SYSTEM ALLOWS A
FRAME TO BE INSTALLED FROM UNITIZED ASSEMBLIES.
SCREWS ARE DRIVEN THROUGH THE BACK OF THE VERTICALS
INTO SPLINES EXTRUDED IN THE HORIZONTAL FRAMING
MEMBERS. THE INDIVIDUAL UNITS ARE THEN SNAPPED
TOGETHER TO FORM A COMPLETED FRAME.
MULLION
MULLION
SNAP-IN FILLER
SHEAR BLOCK
SPLINE SCREWS
HEAD
HEAD
GLASS STOP
GLASS STOP
SHEAR BLOCK
HORIZONTAL
HORIZONTAL
GLASS STOP
GLASS STOP
SILL
SILL
SILL FLASHING
SILL FLASHING
STICK
ASSEMBLY
THE STICK SYSTEM ALLOWS ON-SITE ASSEMBLY.
HEAD AND SILL RECEPTORS ARE FASTENED TO
THE SURROUND. VERTICAL MULLIONS ARE THEN
INSTALLED IN THESE RECEPTORS AND ARE HELD
IN PLACE BY SNAP-IN INSERTS. INTERMEDIATE
HORIZONTAL MEMBERS ARE ATTACHED TO THE
VERTICALS WITH SHEAR BLOCKS. FLASHING IS
NOT REQUIRED.
HEAD RECEPTOR
MULLION
HEAD INSERT
GLASS STOP
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SHEAR BLOCK
SHEAR BLOCK
HORIZONTAL
NOTE:
If the end reaction of the mullion (mullion spacing (ft.)
times height (ft.) times specified windload (psf) divided
by two) is more than 500 lbs., the optional mullion
anchors must be used. (See page 14)
GLASS STOP
SILL INSERT
SILL RECEPTOR
kawneer.com
TRIFAB® VG 450
JANUARY, 2009
PICTORIAL VIEW (FRONT)
EC 97911-07
THE SPLIT VERTICAL IN THE SCREW SPLINE SYSTEM ALLOWS A
FRAME TO BE INSTALLED FROM UNITIZED ASSEMBLIES.
SCREWS ARE DRIVEN THROUGH THE BACK OF THE VERTICALS
INTO SPLINES EXTRUDED IN THE HORIZONTAL FRAMING
MEMBERS. THE INDIVIDUAL UNITS ARE THEN SNAPPED
TOGETHER TO FORM A COMPLETED FRAME.
THE SHEAR BLOCK SYSTEM OF FABRICATION ALLOWS A FRAME
TO BE PRE-ASSEMBLED AND INSTALLED AS A SINGLE UNIT.
HORIZONTALS ARE ATTACHED TO THE VERTICALS WITH SHEAR
BLOCKS.
SCREW SPLINE
ASSEMBLY
SHEAR BLOCK
ASSEMBLY
MULLION
SNAP-IN FILLER
SPLINE SCREWS
MULLION
HEAD
SHEAR BLOCK
HEAD
GLASS STOP
GLASS STOP
SHEAR BLOCK
HORIZONTAL
HORIZONTAL
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6
FLAT FILLER
FLAT FILLER
GLASS STOP
GLASS STOP
SILL
SILL
SILL FLASHING
SHEAR BLOCK
STICK
ASSEMBLY
HEAD RECEPTOR
HEAD INSERT
GLASS STOP
SHEAR BLOCK
MULLION
NOTE:
If the end reaction of the mullion (mullion spacing (ft.)
times height (ft.) times specified windload (psf) divided
by two) is more than 500 lbs., the optional mullion
anchors must be used. (See page 32)
HORIZONTAL
GLASS STOP
SILL INSERT
SILL RECEPTOR
kawneer.com
© Kawneer Company, Inc., 2009
THE STICK SYSTEM ALLOWS ON-SITE ASSEMBLY.
HEAD AND SILL RECEPTORS ARE FASTENED TO
THE SURROUND. VERTICAL MULLIONS ARE THEN
INSTALLED IN THESE RECEPTORS AND ARE HELD
IN PLACE BY SNAP-IN INSERTS. INTERMEDIATE
HORIZONTAL MEMBERS ARE ATTACHED TO THE
VERTICALS WITH SHEAR BLOCKS. FLASHING IS
NOT REQUIRED.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SILL FLASHING
JANUARY, 2009
TRIFAB® VG 450
EC 97911-07
PICTORIAL VIEW (FRONT)
7
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
THE STICK SYSTEM ALLOWS ON-SITE ASSEMBLY. HEAD AND SILL RECEPTORS ARE FASTENED TO THE SURROUND. VERTICAL
MULLIONS ARE THEN INSTALLED IN THESE RECEPTORS AND ARE HELD IN PLACE BY SNAP-IN INSERTS. INTERMEDIATE HORIZONTAL
MEMBERS ARE ATTACHED TO THE VERTICALS WITH SHEAR BLOCKS. FLASHING IS NOT REQUIRED.
STICK
ASSEMBLY
(SSG)
STICK
ASSEMBLY
(WEATHERSEAL)
HEAD RECEPTOR
HEAD RECEPTOR
HEAD INSERT
HEAD INSERT
GLASS STOP
GLASS STOP
SHEAR BLOCK
SHEAR BLOCK
HORIZONTAL
GLASS STOP
SSG MULLION
SSG MULLION
GLASS STOP
SILL INSERT
NOTE:
If the end reaction of the mullion (mullion spacing (ft.)
times height (ft.) times specified windload (psf) divided
by two) is more than 500 lbs., the optional mullion
anchors must be used. (See page 32)
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SILL RECEPTOR
kawneer.com
HORIZONTAL
WEATHERSEAL
GLASS STOP
GLASS STOP
SILL INSERT
SILL RECEPTOR
8
TRIFAB® VG 450
JANUARY, 2009
PICTORIAL VIEW (FRONT)
EC 97911-07
TYPE-B ASSEMBLY
PUNCHED OPENING
(CAPTURED)
TYPE-B ASSEMBLY
PUNCHED OPENING
(SSG)
SPLINE SCREWS
SPLINE SCREWS
HEAD COPE
HEAD
HEAD
GLASS STOP
SSG MULLION
GLASS STOP
MULLION
SHEAR BLOCK
SHEAR BLOCK
HORIZONTAL
HORIZONTAL
GLASS STOP
GLASS STOP
SSG COVER
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
THE PUNCHED OPENING FABRICATION ALLOWS A FRAME TO BE PRE-ASSEMBLED AND INSTALLED AS A SINGLE UNIT. SCREWS ARE
DRIVEN THROUGH THE BACK OF THE HEAD AND SILL MEMBERS INTO SPLINES EXTRUDED IN THE VERTICAL FRAMING MEMBERS.
INTERMEDIATE HORIZONTALS ARE ATTACHED TO THE VERTICALS WITH SHEAR BLOCKS.
SILL
SILL
SPLINE SCREWS
TYPE-B ASSEMBLY
PUNCHED OPENING
(WEATHERSEAL)
SPLINE SCREWS
WEATHERSEAL
HEAD
GLASS STOP
SSG MULLION
SHEAR BLOCK
HORIZONTAL
GLASS STOP
SSG COVER
SILL
SPLINE SCREWS
kawneer.com
© Kawneer Company, Inc., 2009
THE PUNCHED OPENING FABRICATION ALLOWS A FRAME
TO BE PRE-ASSEMBLED AND INSTALLED AS A SINGLE
UNIT. SCREWS ARE DRIVEN THROUGH THE BACK OF THE
HEAD AND SILL MEMBERS INTO SPLINES EXTRUDED IN
THE VERTICAL FRAMING MEMBERS.
INTERMEDIATE HORIZONTALS ARE ATTACHED TO THE
VERTICALS WITH SHEAR BLOCKS.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SPLINE SCREWS
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
PICTORIAL VIEW (BACK)
THE SHEAR BLOCK SYSTEM OF FABRICATION ALLOWS A FRAME
TO BE PRE-ASSEMBLED AND INSTALLED AS A SINGLE UNIT.
HORIZONTALS ARE ATTACHED TO THE VERTICALS WITH SHEAR
BLOCKS.
SCREW SPLINE
ASSEMBLY
SHEAR BLOCK
ASSEMBLY
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
THE SPLIT VERTICAL IN THE SCREW SPLINE SYSTEM ALLOWS A
FRAME TO BE INSTALLED FROM UNITIZED ASSEMBLIES.
SCREWS ARE DRIVEN THROUGH THE BACK OF THE VERTICALS
INTO SPLINES EXTRUDED IN THE HORIZONTAL FRAMING
MEMBERS. THE INDIVIDUAL UNITS ARE THEN SNAPPED
TOGETHER TO FORM A COMPLETED FRAME.
MULLION
MULLION
SNAP-IN FILLER
SPLINE SCREWS
SHEAR BLOCK
HEAD
HEAD
GLASS STOP
GLASS STOP
SHEAR BLOCK
HORIZONTAL
HORIZONTAL
GLASS STOP
GLASS STOP
SILL
SILL
SILL FLASHING
SILL FLASHING
SHEAR BLOCK
THE STICK SYSTEM ALLOWS ON-SITE ASSEMBLY.
HEAD AND SILL RECEPTORS ARE FASTENED TO
THE SURROUND. VERTICAL MULLIONS ARE THEN
INSTALLED IN THESE RECEPTORS AND ARE HELD
IN PLACE BY SNAP-IN INSERTS. INTERMEDIATE
HORIZONTAL MEMBERS ARE ATTACHED TO THE
VERTICALS WITH SHEAR BLOCKS. FLASHING IS
NOT REQUIRED.
STICK
ASSEMBLY
HEAD RECEPTOR
MULLION
HEAD INSERT
GLASS STOP
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
9
SHEAR BLOCK
HORIZONTAL
NOTE:
If the end reaction of the mullion (mullion spacing (ft.)
times height (ft.) times specified windload (psf) divided
by two) is more than 500 lbs., the optional mullion
anchors must be used. (See page 43)
GLASS STOP
SILL INSERT
SILL RECEPTOR
kawneer.com
kawneer.com
© Kawneer Company, Inc., 2009
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
10
JANUARY, 2009
EC 97911-07
JANUARY, 2009
EC 97911-07
TRIFAB® VG 450
11
INDEX (CENTER)
MISCELLANEOUS FRAMING..................................................... 14,15
CORNERS......................................................................................... 16
CURVING & TRIM DETAILS ............................................................. 17
ENTRANCE FRAMING .................................................................... 18
ENTRANCE FRAMING (OPEN BACK) ............................................ 19
GLASSvent™ .............................................................................. 20,21
VENTS............................................................................................... 22
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
BASIC FRAMING DETAILS......................................................... 12,13
kawneer.com
TRIFAB® VG 450
12
JANUARY, 2009
BASIC FRAMING DETAILS (CENTER - Outside Glazed)
EC 97911-07
SCALE 3" = 1'-0"
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
SCREW SPLINE
CAD Details = TF_VG_450-SS-Center--CAD.zip
450-CG-001
450-CG-001
SHEAR BLOCK
STICK
CAD Details = TF_VG_450-SB-Center--CAD.zip
CAD Details = TF_VG_450-Stick-Center--CAD.zip
1-3/4"
(44.5)
TYP.
450-CG-001
450-CG-001
450-CG-005
4
JAMB
5
VERTICAL
450-CG-005
4-1/2"
(114.3) TYP.
450-CG-002
5
VERTICAL
1
HEAD
1
HEAD
1-3/4"
(44.5)
TYP.
1
HEAD
4
JAMB
450-CG-004
450-CG-004
450-CG-003
451-VG-006
2-1/4"
(57.2)
5
VERTICAL
4
JAMB
450-CG-003
450-CG-004
450-CG-008
4-1/2"
(114.3) TYP.
450-CG-002
2
HORIZONTAL
2
HORIZONTAL
2
HORIZONTAL
450-CG-004
450-CG-011
450-CG-004
450-CG-011
450-CG-004
450-CG-003
450-CG-007
450-CG-001
450-037
*See page 14 for Optional High
Performance Flashing.
3
SILL
450-037
3
SILL
2-1/4"
(57.2)
3
SILL
450-CG-001
451-VG-106
*See page 14 for Optional High
Performance Flashing.
kawneer.com
© Kawneer Company, Inc., 2009
5
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
13
BASIC FRAMING DETAILS (CENTER - Inside Glazed)
SCALE 3" = 1'-0"
4
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
SCREW SPLINE
CAD Details = TF_VG_450-SS-Center--CAD.zip
450-CG-001
450-CG-001
SHEAR BLOCK
STICK
CAD Details = TF_VG_450-SB-Center--CAD.zip
CAD Details = TF_VG_450-Stick-Center--CAD.zip
1-3/4"
(44.5)
TYP.
450-CG-001
450-CG-001
450-CG-005
4
JAMB
5
VERTICAL
450-CG-005
450-CG-002
1-3/4"
(44.5)
TYP.
1
HEAD
4
JAMB
5
VERTICAL
1
HEAD
1
HEAD
450-CG-003
450-CG-003
450-CG-004
451-VG-006
2-1/4"
(57.2)
5
VERTICAL
4
JAMB
450-CG-004
450-CG-008
4-1/2"
(114.3) TYP.
450-CG-004
450-CG-002
2
HORIZONTAL
2
HORIZONTAL
2
HORIZONTAL
450-CG-011
450-CG-004
450-CG-011
450-CG-003
450-CG-004
450-CG-004
450-CG-007
450-CG-001
3
SILL
450-037
*See page 14 for Optional High
Performance Flashing.
kawneer.com
450-CG-001
3
SILL
450-037
*See page 14 for Optional High
Performance Flashing.
3
SILL
2-1/4"
(57.2)
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
5
4-1/2"
(114.3) TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
451-VG-106
14
TRIFAB® VG 450
JANUARY, 2009
MISCELLANEOUS FRAMING (CENTER)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Center--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Center--CAD.zip
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Center--CAD.zip
451-HP-126
CLIP
450-CG-540
450-CG-010
451-HP-037
HIGH PERFORMANCE
FLASHING
EXPANSION
MULLION
450-026
450-520
450-087
450-110
STEEL
REINFORCING
SNAP-IN
DOOR STOP
STEEL
REINFORCEMENT
450-VG-006
2"
(50.8)
2"
(50.8)
2"
(50.8)
2"
(50.8)
450-VG-006
450-CG-362
450-VG-106
MULLION ANCHOR
NOTE:
If the end reaction of the mullion (mullion spacing (ft.)
times height (ft.) times specified windload (psf) divided
by two) is more than 500 lbs., the optional Mullion
Anchors must be used.
OPTIONAL LIGHTWEIGHT
CAN RECEPTORS
(Stick System)
450-VG-006
OPTIONAL UNEQUAL LEG
CAN RECEPTORS
(Stick System)
NOTE:
Mullion Anchor not used with Lightweight Receptor.
kawneer.com
© Kawneer Company, Inc., 2009
SNAP-IN
FLAT POCKET
FILLER
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SNAP-IN
FLAT FILLER
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
15
MISCELLANEOUS FRAMING (CENTER)
SCALE 3" = 1'-0"
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Center--CAD.zip
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Center--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Center--CAD.zip
451-VG-570
2"
(50.8)
TYPICAL
451-VG-570
451-VG-573
451-VG-572
5-1/2"
(139.7)
TYPICAL
451-VG-374
CLIP
HEAVY WEIGHT
HEAD
COMPENSATING RECEPTOR
STANDARD HEAD
COMPENSATING RECEPTOR
451-VG-571
451-VG-570
451-VG-572
JAMB
COMPENSATING RECEPTOR
450-030
4-1/2"
(114.3)
450-CG-004
450-CG-004
450-CG-004
450-029
450-027
4-1/2"
(114.3)
450-028
450-CG-004
4-1/2"
(114.3)
450-030
6-5/16" MIN. - 8-3/16" MAX.
(160.3)
(208)
4-5/16" MIN. - 5-9/16" MAX.
(109.5)
(141.3)
2"
(50.8)
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
ONE PIECE
HEAD
COMPENSATING RECEPTOR
450-027
450-037
450-109
450-031
NARROW
SIDELITE BASE
450-CG-002
450-031
NARROW
SIDELITE BASE
SIDELITE BASE
4-1/2" X 4-1/2"
HORIZONTAL
NOTE: SIDELITE BASES SHOWN ARE FOR USE WITH SCREW SPLINE AND SHEAR BLOCK SYSTEMS ONLY.
kawneer.com
16
TRIFAB® VG 450
JANUARY, 2009
CORNERS (CENTER)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details STICK
= TF_VG_450-Stick-Center--CAD.zip
450-017
450-017
4-1/2"
(114.3) TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Center--CAD.zip
450-017
4-1/2"
(114.3) TYP.
4-1/2" x 4-1/2" TUBE
450-CG-015
TWO PIECE
NO POCKET CORNER
ONE POCKET
CORNER
450-CG-016
450-CG-015
450-CG-035
450-CG-015
TWO POCKET
90o CORNER
450-CG-015
450-CG-015
TWO POCKET
VERTICAL POST
THREE POCKET
90o CORNER
451-CG-034
450-CG-016
450-CG-028
450-CG-028
450-CG-028
450-CG-028
450-CG-016
451-CG-034
FOUR POCKET
90o CORNER
450-CG-010
135o INSIDE
CORNER
135o OUTSIDE
CORNER
451-CG-071
451-CG-071
450-CG-010
450-CG-541
450-CG-541
BRAKE METAL
FILLERS
VARIABLE DEGREE
BRAKE METAL CORNER
450-CG-541
155° TO 180° PIVOT MULLION
(OUTSIDE CORNER)
450-CG-541
155° TO 180° PIVOT MULLION
(INSIDE CORNER)
kawneer.com
© Kawneer Company, Inc., 2009
060-119
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Center--CAD.zip
JANUARY, 2009
TRIFAB® VG 450
EC 97911-07
CURVING & TRIM DETAILS
SCALE 3" = 1'-0"
1
1
1-3/4"
(44.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Center--CAD.zip
175-181
3
175-183
175-182
175-190
175-181
4-1/2"
(114.3)
2
CURVING DETAILS
(Center Plane Only)
2
175-190
3
175-191
CAD Details SCREW SPLINE
= TF_VG_450-SS-Center--CAD.zip
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Center--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Center--CAD.zip
STOOL TRIM
450-VG-640
STOOL TRIM CLIP
WITH STANDARD FLASHING
BRAKE METAL
FILLERS
STOOL TRIM
451-VG-150
450-VG-640
BRAKE METAL ADAPTOR
AT HORIZONTAL
STOOL TRIM CLIP
WITH HIGH PERFORMANCE
FLASHING
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
451-VG-150
BRAKE METAL
FILLERS
STOOL TRIM
451-VG-150
451-VG-150
069-271
STOOL TRIM CLIP
FOR STICK/TYPE-B ASSEMBLY
kawneer.com
BRAKE METAL ADAPTOR
AT VERTICAL
17
TRIFAB® VG 450
18
JANUARY, 2009
ENTRANCE FRAMING (CENTER)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details ENTRANCE
= TF_VG_450_Ent-Center--CAD.zip
NOTE: OTHER TYPES OF KAWNEER DOORS MAY BE USED WITH THIS FRAMING SYSTEM.
SEE ENTRANCE DETAILS FOR ADDITIONAL INFORMATION.
6
7
1
450-033
INSERT
10
2
4
5
9
8
450-110 STEEL
(As Required)
450-501
or
450-019
3
3
Transom area for both double or single acting doors with
glass surround. Jambs above transom bar are routed
out to accept glass holding insert with or without steel
reinforcing.
ELEVATIONS ARE NUMBER KEYED TO DETAILS
1-3/4"
(44.5)
SINGLE ACTING
1
450-081
1
450-502
450-500
450-CG-001
450-CG-001
4-1/2"
(114.3)
10
10
450-022
STOPS
450-022
STOPS
450-501
450-081
2
DOUBLE ACTING
4
5
450-501
2
450-502
4-1/2"
(114.3)
450-500
1-3/4"
(44.5)
450-019
3
SINGLE ACTING DOOR
8
9
450-019
3
Optional
Bottom Rail Sweep
069-139
SINGLE ACTING DOOR
WITH TRANSOM
069-143
DOUBLE ACTING DOOR
WITH TRANSOM
DOUBLE ACTING DOOR
kawneer.com
© Kawneer Company, Inc., 2009
7
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
6
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450 FRAMING INCORPORATING KAWNEER® “190” DOORS.
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
19
ENTRANCE FRAMING (CENTER-Open Back))
SCALE 3" = 1'-0"
CAD Details ENTRANCE
= TF_VG_450_Ent-Center--CAD.zip
NOTE: OTHER TYPES OF KAWNEER DOORS MAY BE USED WITH THIS FRAMING SYSTEM.
SEE ENTRANCE DETAILS FOR ADDITIONAL INFORMATION.
6
7
1
6
7
450-033
INSERT
10
450-CG-002
450-CG-028
2
4
5
9
8
450-110 STEEL
(As Required)
3
3
Transom area for both double or single acting doors with
glass surround. Jambs above transom bar are routed
out to accept glass holding insert with or without steel
reinforcing.
ELEVATIONS ARE NUMBER KEYED TO DETAILS
SINGLE ACTING
1-3/4"
(44.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450 FRAMING INCORPORATING KAWNEER® “190” DOORS.
1
DOUBLE ACTING
450-081
1
450-502
450-500
450-CG-001
450-CG-001
10
10
4
5
450-022
STOPS
450-022
STOPS
450-081
2
450-599
2
450-500
450-599
450-CG-002
450-CG-028
4-1/2"
(114.3)
450-502
1-3/4"
(44.5)
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4-1/2"
(114.3)
SINGLE ACTING
SINGLE ACTING DOOR
DOUBLE ACTING
450-064
450-081
8
9
450-502
450-500
10
10
DOUBLE ACTING DOOR
kawneer.com
450-064
TRIFAB® VG 450
20
TM
GLASSvent
JANUARY, 2009
(CENTER)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Center--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Center--CAD.zip
PROJECT-OUT
VERTICAL SECTION SHOWN
OUTSWING CASEMENT
VERTICAL SECTION SHOWN
450-CG-011
1
1
3
450-CG-004
450-CG-001
5
6
2
3
7
8
4
450-CG-011
450-CG-001
ELEVATION IS NUMBER KEYED TO DETAILS
2
4
450-CG-004
450-CG-001
450-CG-002
450-CG-002
5
450-CG-001
450-CG-001
450-CG-002
6
7
450-CG-002
8
MAXIMUM / MINIMUM SIZES (1/4" INFILL)
PROJECT-OUT
MAXIMUM 60" x 36"
MINIMUM 12" x 12"
OUTSWING CASEMENT
MAXIMUM 36" x 60"
MINIMUM 12" x 12"
kawneer.com
© Kawneer Company, Inc., 2009
450-CG-001
PROJECT-OUT
HORIZONTAL SECTION SHOWN
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
OUTSWING CASEMENT
HORIZONTAL SECTION SHOWN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Center--CAD.zip
TRIFAB® VG 450
JANUARY, 2009
GLASSventTM (CENTER)
EC 97911-07
STOREFRONT GLASSvent™ HARDWARE SELECTION GUIDE
PROJECT - OUT
OUTSWING CASEMENT
Stainless steel 4-bar hinge
STANDARD
STANDARD
Cast white bronze cam lock
STANDARD
STANDARD
Cast white bronze cam lock with pole ring
OPTIONAL
OPTIONAL
Cast white bronze custodial lock
with removable handle
OPTIONAL
OPTIONAL
Cast white bronze concealed lock
with removable hex key
OPTIONAL
OPTIONAL
Cast white bronze pole/pull ring
OPTIONAL
Pivot-shoe roto-operator
OPTIONAL
Multi-point lock with cast white
bronze locking handle
OPTIONAL
Insect screen
CAM LOCK
REMOVABLE
HANDLE
OPTIONAL
CAM LOCK
WITH POLE RING
ROTO-OPERATOR
OPTIONAL
PULL RING
CUSTODIAL
LOCK
STAINLESS STEEL
4 BAR HINGES
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
DESCRIPTION
CONCEALED
LOCK
kawneer.com
INSECT SCREEN
WITH STANDARD WICKET
INSECT SCREEN
WITH FULL WICKET
21
TRIFAB® VG 450
22
JANUARY, 2009
VENTS (CENTER)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Center--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Center--CAD.zip
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Center--CAD.zip
PROJECT-OUT
VERTICAL SECTION
7225 VENTS SHOWN
NOTE: OTHER VENT TYPES CAN BE
ACCOMMODATED, CONSULT YOUR KAWNEER
REPRESENTATIVE FOR OTHER OPTIONS
450-CG-011
1
450-CG-004
1
4
3
2
2
450-CG-004
450-CG-011
PROJECT-OUT
HORIZONTAL SECTION
450-CG-005
3
450-CG-005
4
kawneer.com
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
ELEVATION IS NUMBER KEYED TO DETAILS
JANUARY, 2009
EC 97911-07
TRIFAB® VG 450
23
INDEX (FRONT)
MISCELLANEOUS FRAMING..................................................... 31,32
CORNERS......................................................................................... 33
ENTRANCE FRAMING..................................................................... 34
GLASSvent™ .............................................................................. 35-36
VENTS............................................................................................... 37
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
BASIC FRAMING DETAILS......................................................... 24-30
kawneer.com
TRIFAB® VG 450
24
JANUARY, 2009
BASIC FRAMING DETAILS (FRONT - Outside Glazed)
EC 97911-07
SCALE 3" = 1'-0"
5
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
SCREW SPLINE
SHEAR BLOCK
STICK
CAD Details = TF_VG_450-SS-Front--CAD.zip
CAD Details = TF_VG_450-SB-Front--CAD.zip
CAD Details = TF_VG_450-Stick-Front--CAD.zip
1-3/4"
(44.5)
450-VG-012
450-VG-001
450-VG-001
450-VG-005
4-1/2"
(114.3)
450-VG-026
1-3/4"
(44.5)
1
HEAD
4
JAMB
5
VERTICAL
1
HEAD
450-VG-004
1
HEAD
450-VG-004
450-VG-003
4
JAMB
450-VG-004
450-VG-011
450-VG-011
450-VG-004
450-VG-004
450-VG-008
450-VG-011
2
HORIZONTAL
2
HORIZONTAL
450-VG-026
451-VG-006
450-VG-003
4-1/2"
(114.3)
2
HORIZONTAL
5
VERTICAL
2-1/4"
(57.15)
5
VERTICAL
4
JAMB
4-1/2"
(114.3)
450-VG-005
450-VG-026
450-VG-004
450-VG-026
450-VG-007
450-VG-001
450-037
*See page 31 for Optional High
Performance Flashing.
3
SILL
450-037
3
SILL
2-1/4"
(57.15)
3
SILL
450-VG-001
451-VG-106
*See page 31 for Optional High
Performance Flashing.
kawneer.com
© Kawneer Company, Inc., 2009
450-VG-001
1-3/4"
(44.5)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
BASIC FRAMING DETAILS (FRONT - Inside Glazed)
1
4
5
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
SCREW SPLINE
SHEAR BLOCK
STICK
CAD Details = TF_VG_450-SS-Front--CAD.zip
CAD Details = TF_VG_450-SB-Front--CAD.zip
CAD Details = TF_VG_450-Stick-Front--CAD.zip
1-3/4"
(44.5)
450-VG-001
450-VG-012
1-3/4"
(44.5)
450-VG-001
450-VG-001
450-VG-005
450-VG-026
1-3/4"
(44.5)
1
HEAD
450-VG-103
4
JAMB
5
VERTICAL
1
HEAD
450-VG-103
4
JAMB
1
HEAD
5
VERTICAL
2-1/4"
(57.15)
5
VERTICAL
4
JAMB
4-1/2"
(114.3)
450-VG-005
4-1/2"
(114.3)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SCALE 3" = 1'-0"
450-VG-104
4-1/2"
(114.3)
450-VG-111
450-VG-111
2
HORIZONTAL
451-VG-006
450-VG-108
450-VG-104
450-VG-104
450-VG-111
2
HORIZONTAL
2
HORIZONTAL
450-VG-104
450-VG-104
450-VG-001
450-VG-001
450-VG-104
450-VG-007
3
SILL
450-037
*See page 31 for Optional High
Performance Flashing.
kawneer.com
3
SILL
450-037
*See page 31 for Optional High
Performance Flashing.
3
SILL
2-1/4"
(57.15)
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
25
451-VG-106
TRIFAB® VG 450
JANUARY, 2009
BASIC FRAMING DETAILS (FRONT)
EC 97911-07
1
4
1A
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SCALE 3" = 1'-0"
5
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
STICK SYSTEM (INSIDE GLAZED)
TWO COLOR OPTION
STANDARD RECEPTOR with SSG ADAPTOR
CAD Details STICK = TF_VG_450-Stick-Front--CAD.zip
1-3/4"
(44.5)
TYP.
450-VG-131
450-SSG-005
450-SSG-005
450-SSG-005
4-1/2"
(114.3) TYP.
450-VG-131
450-VG-130
4
JAMB
5
VERTICAL
450-SSG-129
5B
WEATHERSEAL
VERTICAL
5A
SSG
VERTICAL
4A
SSG
JAMB
1
HEAD
2-1/4"
(57.15)
450-SSG-328
451-VG-130
451-VG-006
451-VG-006
450-VG-108
1A
HEAD
450-VG-104
450-VG-108
451-VG-130
2
HORIZONTAL
1-3/4"
(44.5)
450-SSG-111
450-VG-104
450-SSG-111
2A
HORIZONTAL
450-SSG-004
450-SSG-004
451-VG-130
450-VG-104
450-VG-104
450-VG-007
450-VG-007
3
SILL
2-1/4"
(57.15)
451-VG-130
3A
SILL
451-VG-106
451-VG-106
450-SSG-328
kawneer.com
© Kawneer Company, Inc., 2009
450-SSG-250
450-VG-130
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
26
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
BASIC FRAMING DETAILS (FRONT)
1
4
1A
5
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
STICK SYSTEM (INSIDE GLAZED)
SSG RECEPTOR
STICK SYSTEM (OUTSIDE GLAZED)
SSG RECEPTOR
CAD Details STICK SSG = TF_VG_450-Stick-SSG-Front--CAD.zip
CAD Details STICK SSG = TF_VG_450-Stick-SSG-Front--CAD.zip
1-3/4"
(44.5)
TYP.
450-SSG-005
450-SSG-005
450-SSG-005
450-SSG-005
4-1/2"
(114.3) TYP.
450-SSG-005
1-3/4"
(44.5)
TYP.
4-1/2"
(114.3) TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SCALE 3" = 1'-0"
450-SSG-129
4
SSG
JAMB
5
SSG
VERTICAL
4
SSG
JAMB
5
WEATHERSEAL
VERTICAL
5
SSG
VERTICAL
2
HORIZONTAL
450-SSG-008
1
HEAD
2-1/4"
(57.15)
2-1/4"
(57.15)
450-SSG-006
1
HEAD
450-SSG-007
450-SSG-111
450-SSG-111
2
HORIZONTAL
450-SSG-004
450-VG-104
450-VG-104
450-SSG-007
kawneer.com
450-SSG-007
3
SILL
450-SSG-106
2-1/4"
(57.15)
3
SILL
450-SSG-106
450-SSG-104
450-SSG-004
2-1/4"
(57.15)
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
450-SSG-250
450-SSG-129
450-SSG-106
27
TRIFAB® VG 450
JANUARY, 2009
BASIC FRAMING DETAILS (FRONT)
EC 97911-07
1
4
1A
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SCALE 3" = 1'-0"
5
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
STICK SYSTEM (INSIDE GLAZED)
SSG RECEPTOR
TWO COLOR OPTION
CAD Details STICK SSG = TF_VG_450-Stick-SSG-Front--CAD.zip
450-SSG-005
450-SSG-005
450-SSG-005
450-SSG-250
450-SSG-129
4
SSG
JAMB
5
SSG
VERTICAL
5
WEATHERSEAL
VERTICAL
2-1/4"
(57.15)
450-SSG-006
1
HEAD
451-VG-130
450-SSG-008
450-SSG-104
450-SSG-111
2
HORIZONTAL
450-SSG-004
450-VG-104
3
SILL
2-1/4"
(57.15)
451-VG-130
450-SSG-106
kawneer.com
© Kawneer Company, Inc., 2009
4-1/2"
(114.3) TYP.
1-3/4"
(44.5)
TYP.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
28
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
BASIC FRAMING DETAILS (FRONT)
SCALE 3" = 1'-0"
1A
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
4
5
TYPE-B MULTI-LITE PUNCHED OPENINGS
(20 FEET MAXIMUM UNIT WIDTH)
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
TYPE-B (INSIDE GLAZED)
PUNCHED OPENING
CAD Details TYPE-B = TF_VG_450_Type-B_Front--CAD.zip
1-3/4"
(44.5)
450-VG-101
4
JAMB
5
VERTICAL
450-VG-103
450-VG-104
4-1/2"
(114.3) TYP.
450-VG-111
2
HORIZONTAL
450-VG-104
450-VG-101
3
SILL
kawneer.com
450-VG-325
1A
HEAD
1-3/4"
(44.5)
TYP.
1-3/4"
(44.5)
TYP.
450-VG-327
1
HEAD
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4-1/2"
(114.3)
450-VG-005
450-VG-103
450-VG-104
4-1/2"
(114.3) TYP.
29
30
TRIFAB® VG 450
JANUARY, 2009
BASIC FRAMING DETAILS (FRONT)
EC 97911-07
SCALE 3" = 1'-0"
4
5
TYPE B: MULTI-LITE PUNCHED OPENINGS
(20 FEET MAXIMUM UNIT WIDTH)
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
TYPE-B (INSIDE GLAZED)
SSG/WEATHERSEAL
PUNCHED OPENING
CAD Details TYPE-B = TF_VG_450_Type-B_Front--CAD.zip
1-3/4"
(44.5)
TYP.
450-VG-101
450-SSG-005
450-SSG-005
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1A
1
5
SSG
VERTICAL
5A
WEATHERSEAL
VERTICAL
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
JAMB
450-VG-103
450-VG-104
2
HORIZONTAL
450-SSG-004
4-1/2"
(114.3) TYP.
1A
HEAD
1-3/4"
(44.5)
TYP.
1
HEAD
1-3/4"
(44.5)
TYP.
450-VG-327
450-VG-103
450-VG-104
4-1/2"
(114.3) TYP.
450-SSG-111
450-VG-104
450-VG-101
3
SILL
450-VG-325
kawneer.com
© Kawneer Company, Inc., 2009
450-SSG-250
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
MISCELLANEOUS FRAMING (FRONT)
SCALE 3" = 1'-0"
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Front--CAD.zip
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Front--CAD.zip
450-VG-540
450-VG-010
450-026
450-087
EXPANSION
MULLION
SNAP-IN FLAT
POCKET FILLER
SNAP-IN
FLAT FILLER
451-VG-570
2"
(50.8)
TYPICAL
451-VG-570
451-VG-573
451-VG-572
5-1/2"
(139.7)
TYPICAL
451-VG-374
CLIP
HEAVY WEIGHT
HEAD
COMPENSATING RECEPTOR
STANDARD HEAD
COMPENSATING RECEPTOR
451-VG-571
451-VG-570
ONE PIECE
HEAD
COMPENSATING RECEPTOR
451-VG-572
JAMB
COMPENSATING RECEPTOR
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
CAD Details STICK
= TF_VG_450-Stick-Front--CAD.zip
451-HP-126
CLIP
451-HP-037
HIGH PERFORMANCE FLASHING
kawneer.com
31
32
TRIFAB® VG 450
JANUARY, 2009
MISCELLANEOUS FRAMING (FRONT)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details STICK
= TF_VG_450-Stick-Front--CAD.zip
450-VG-006
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Front--CAD.zip
2"
(50.8)
2"
(50.8)
450-VG-006
450-VG-362
2"
(50.8)
2"
(50.8)
MULLION ANCHOR
450-VG-006
450-VG-106
OPTIONAL LIGHTWEIGHT
CAN RECEPTORS
(Stick System)
SSG MULLION ANCHOR
NOTE:
If the end reaction of the mullion (mullion spacing (ft.)
times height (ft.) times specified windload (psf) divided
by two) is more than 500 lbs., the optional Mullion
Anchors must be used.
NOTE:
Mullion Anchor not used with Lightweight Receptor.
451-VG-150
BRAKE METAL
FILLERS
BRAKE METAL
FILLERS
451-VG-150
451-VG-150
451-VG-150
BRAKE METAL ADAPTOR
AT HORIZONTAL
BRAKE METAL ADAPTOR
AT VERTICAL
STOOL TRIM
450-VG-640
STOOL TRIM CLIP
WITH STANDARD FLASHING
STOOL TRIM
450-VG-640
STOOL TRIM CLIP
WITH HIGH PERFORMANCE
FLASHING
STOOL TRIM
069-271
STOOL TRIM CLIP
FOR STICK/TYPE-B ASSEMBLY
kawneer.com
© Kawneer Company, Inc., 2009
450-SSG-362
OPTIONAL UNEQUAL LEG
CAN RECEPTORS
(Stick System)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Front--CAD.zip
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
33
CORNERS (FRONT)
SCALE 3" = 1'-0"
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Front--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Front--CAD.zip
450-VG-015
450-017
450-017
4-1/2"
(114.3) TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Front--CAD.zip
060-119
450-VG-015
450-017
450-VG-035
4-1/2"
(114.3) TYP.
4-1/2" x 4-1/2" TUBE
450-VG-010
TWO PIECE
NO POCKET CORNER
ONE POCKET
CORNER
450-VG-010
450-VG-010
BRAKE METAL
FILLERS
TWO POCKET
90o CORNER
450-VG-010
BRAKE METAL
FILLERS
BRAKE METAL
FILLERS
TWO POCKET
BRAKE METAL POST
VARIABLE DEGREE
BRAKE METAL
OUTSIDE CORNER
450-VG-010
VARIABLE DEGREE
BRAKE METAL
INSIDE CORNER
450-SSG-016
450-SSG-116
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
450-VG-010
450-SSG-115
450-SSG-116
450-SSG-115
450-SSG-015
450-SSG-135
90o SSG CORNER
o
90 CORNER
kawneer.com
135o CORNER
135o SSG CORNER
TRIFAB® VG 450
34
JANUARY, 2009
ENTRANCE FRAMING (FRONT)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details ENTRANCE = TF_VG_450-Entrance-Front--CAD.zip
NOTE: OTHER TYPES OF KAWNEER DOORS MAY BE USED WITH THIS FRAMING SYSTEM.
SEE ENTRANCE DETAILS FOR ADDITIONAL INFORMATION.
1
450-VG-033
INSERT
6
7
10
2
4
5
9
8
450-VG-019
7
6
3
3
450-VG-019
Transom area for both double or single acting doors with
glass surround. Jambs above transom bar are routed out
to accept glass holding insert.
ELEVATIONS ARE NUMBER KEYED TO DETAILS
1-3/4"
(44.5)
TYP.
SINGLE ACTING
1
DOUBLE ACTING
450-081
1
450-502
450-500
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450 FRAMING INCORPORATING KAWNEER® “190” DOORS.
450-VG-001
450-VG-001
450-VG-022
10
4
5
450-022
450-VG-022
2
450-VG-019
450-081
450-VG-019
450-502
450-500
4-1/2"
(114.3)
TYP.
069-177
1-3/4"
(44.5)
TYP.
069-177
SINGLE ACTING DOOR
450-VG-019
450-VG-019
8
3
9
3
069-139
SINGLE ACTING DOOR
WITH TRANSOM
069-143
DOUBLE ACTING DOOR
WITH TRANSOM
DOUBLE ACTING DOOR
kawneer.com
© Kawneer Company, Inc., 2009
451-VG-004
450-022
10
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
451-VG-004
4-1/2"
(114.3) TYP.
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
35
GLASSvent™ (FRONT)
SCALE 3" = 1'-0"
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Front--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Front--CAD.zip
PROJECT-OUT
VERTICAL SECTION SHOWN
OUTSWING CASEMENT
VERTICAL SECTION SHOWN
3
450-VG-003
5
450-VG-026
6
2
3
7
8
4
ELEVATION IS NUMBER KEYED TO DETAILS
2
450-VG-011
450-VG-001
4
450-VG-026
OUTSWING CASEMENT
HORIZONTAL SECTION SHOWN
450-VG-005
5
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
450-VG-004
450-VG-011
1
450-VG-004
1
450-VG-004
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Front--CAD.zip
PROJECT-OUT
HORIZONTAL SECTION SHOWN
450-VG-005
450-VG-005
450-VG-005
6
7
8
MAXIMUM / MINIMUM SIZES (1/4" INFILL)
kawneer.com
PROJECT-OUT
MAXIMUM 60" x 36"
MINIMUM 12" x 12"
OUTSWING CASEMENT
MAXIMUM 36" x 60"
MINIMUM 12" x 12"
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
GLASSvent™ (FRONT)
OUTSWING CASEMENT
Stainless steel 4-bar hinge
STANDARD
STANDARD
Cast white bronze cam lock
STANDARD
STANDARD
Cast white bronze cam lock with pole ring
OPTIONAL
OPTIONAL
Cast white bronze custodial lock
with removable handle
OPTIONAL
OPTIONAL
Cast white bronze concealed lock
with removable hex key
OPTIONAL
OPTIONAL
Cast white bronze pole/pull ring
OPTIONAL
Pivot-shoe roto-operator
OPTIONAL
Multi-point lock with cast white
bronze locking handle
OPTIONAL
Insect screen
CAM LOCK
REMOVABLE
HANDLE
CONCEALED
LOCK
OPTIONAL
CAM LOCK
WITH POLE RING
ROTO-OPERATOR
INSECT SCREEN
WITH STANDARD WICKET
OPTIONAL
PULL RING
CUSTODIAL
LOCK
STAINLESS STEEL
4 BAR HINGES
INSECT SCREEN
WITH FULL WICKET
kawneer.com
© Kawneer Company, Inc., 2009
PROJECT - OUT
DESCRIPTION
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
STOREFRONT GLASSvent™ HARDWARE SELECTION GUIDE
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
36
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
VENTS (FRONT)
SCALE 3" = 1'-0"
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Front--CAD.zip
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Front--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Front--CAD.zip
PROJECT-OUT
VERTICAL SECTION
450-VG-111
7225 VENTS SHOWN
NOTE: OTHER VENT TYPES CAN BE
ACCOMMODATED, CONSULT YOUR KAWNEER
REPRESENTATIVE FOR OTHER OPTIONS
1
450-VG-104
1
4
3
2
ELEVATION IS NUMBER KEYED TO DETAILS
2
450-VG-104
PROJECT-OUT
HORIZONTAL SECTION
450-VG-005
450-VG-005
3
4
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
450-VG-111
kawneer.com
37
kawneer.com
© Kawneer Company, Inc., 2009
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
38
JANUARY, 2009
EC 97911-07
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JANUARY, 2009
EC 97911-07
kawneer.com
TRIFAB® VG 450
39
INDEX (BACK)
BASIC FRAMING DETAILS......................................................... 40,41
MISCELLANEOUS FRAMING..................................................... 42,43
CORNERS......................................................................................... 44
ENTRANCE FRAMING..................................................................... 45
TRIFAB® VG 450
40
JANUARY, 2009
BASIC FRAMING DETAILS (BACK - Outside Glazed)
EC 97911-07
SCALE 3" = 1'-0"
5
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
SCREW SPLINE
SHEAR BLOCK
STICK
CAD Details = TF_VG_450-SS-Back--CAD.zip
CAD Details = TF_VG_450-SB-Back--CAD.zip
CAD Details = TF_VG_450-Stick-Back--CAD.zip
450-VG-001
4-1/2"
(114.3) TYP.
450-VG-026
450-VG-005
1-3/4"
(44.5)
TYP.
1
HEAD
450-VG-103
4
JAMB
1
HEAD
450-VG-005
4
JAMB
5
VERTICAL
450-VG-103
1
HEAD
2-1/4"
(57.15)
5
VERTICAL
4
JAMB
5
VERTICAL
451-VG-006
450-VG-108
450-VG-104
450-VG-104
450-VG-104
4-1/2"
(114.3) TYP.
450-VG-111
450-VG-111
2
HORIZONTAL
450-VG-104
450-VG-104
450-VG-001
3
SILL
450-037
*See page 42 for Optional High
Performance Flashing.
450-VG-111
2
HORIZONTAL
450-VG-104
450-VG-001
3
SILL
450-037
450-VG-007
3
SILL
2-1/4"
(57.15)
2
HORIZONTAL
451-VG-106
*See page 42 for Optional High
Performance Flashing.
kawneer.com
© Kawneer Company, Inc., 2009
450-VG-001
1-3/4"
(44.5)
TYP.
4-1/2"
(114.3) TYP.
450-VG-012
450-VG-001
1-3/4"
(44.5)
TYP.
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
41
BASIC FRAMING DETAILS (BACK - Inside Glazed)
SCALE 3" = 1'-0"
4
5
2
3
ELEVATION IS NUMBER KEYED TO DETAILS
SCREW SPLINE
SHEAR BLOCK
STICK
CAD Details = TF_VG_450-SS-Back--CAD.zip
CAD Details = TF_VG_450-SB-Back--CAD.zip
CAD Details = TF_VG_450-Stick-Back--CAD.zip
450-VG-001
450-VG-026
450-VG-001
450-VG-005
1
HEAD
2-1/4"
(57.15)
450-VG-004
450-VG-004
450-VG-008
450-VG-011
*See page 42 for Optional High
Performance Flashing.
kawneer.com
2
HORIZONTAL
450-VG-026
450-VG-001
450-VG-026
451-VG-130
450-VG-001
3
SILL
450-037
*See page 42 for Optional High
Performance Flashing.
3
SILL
2-1/4"
(57.15)
450-037
450-VG-011
450-VG-004
450-VG-004
450-VG-011
2
HORIZONTAL
450-VG-026
3
SILL
450-VG-006
450-VG-003
4-1/2"
(114.3) TYP.
2
HORIZONTAL
5
VERTICAL
450-VG-004
1-3/4"
(44.5)
TYP.
450-VG-005
4
JAMB
5
VERTICAL
1
HEAD
450-VG-003
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
HEAD
4
JAMB
450-VG-004
5
VERTICAL
4
JAMB
1-3/4"
(44.5)
TYP.
4-1/2"
(114.3) TYP.
450-VG-012
450-VG-001
1-3/4"
(44.5)
TYP.
4-1/2"
(114.3) TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
451-VG-106
450-VG-007
42
TRIFAB® VG 450
JANUARY, 2009
MISCELLANEOUS FRAMING (BACK)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Back--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Back--CAD.zip
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
450-087
450-026
450-VG-010
EXPANSION MULLION
SNAP-IN
FLAT FILLER
FLAT FILLER
451-VG-570
2"
(50.8)
TYPICAL
451-VG-570
451-VG-573
451-VG-572
5-1/2"
(139.7)
TYPICAL
451-VG-374
CLIP
HEAVY WEIGHT
HEAD
COMPENSATING RECEPTOR
STANDARD HEAD
COMPENSATING RECEPTOR
451-VG-571
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
450-VG-540
451-VG-570
ONE PIECE
HEAD
COMPENSATING RECEPTOR
451-VG-572
JAMB
COMPENSATING RECEPTOR
451-HP-126
CLIP
451-HP-037
HIGH PERFORMANCE FLASHING
kawneer.com
© Kawneer Company, Inc., 2009
CAD Details SCREW SPLINE
= TF_VG_450-SS-Back--CAD.zip
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
43
MISCELLANEOUS FRAMING (BACK)
SCALE 3" = 1'-0"
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Back--CAD.zip
CAD Details STICK
= TF_VG_450-Stick-Back--CAD.zip
450-VG-006
2"
(50.8)
450-VG-006
450-VG-362
2"
(50.8)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
CAD Details SCREW SPLINE
= TF_VG_450-SS-Back--CAD.zip
MULLION ANCHOR
NOTE:
If the end reaction of the mullion (mullion spacing (ft.)
times height (ft.) times specified windload (psf) divided
by two) is more than 500 lbs., the optional Mullion
Anchors must be used.
450-VG-106
OPTIONAL LIGHTWEIGHT
CAN RECEPTORS
450-VG-006
OPTIONAL UNEQUAL LEG
CAN RECEPTORS
(Stick System)
NOTE:
Mullion Anchor not used with Lightweight Receptor.
BRAKE METAL
FILLERS
BRAKE METAL
FILLERS
451-VG-150
451-VG-150
451-VG-150
BRAKE METAL ADAPTOR
AT HORIZONTAL
BRAKE METAL ADAPTOR
AT VERTICAL
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
451-VG-150
STOOL TRIM
450-VG-640
STOOL TRIM CLIP
WITH STANDARD FLASHING
kawneer.com
STOOL TRIM
STOOL TRIM
450-VG-640
STOOL TRIM CLIP
WITH HIGH PERFORMANCE
FLASHING
069-271
STOOL TRIM CLIP
FOR STICK ASSEMBLY
44
TRIFAB® VG 450
JANUARY, 2009
CORNERS (BACK)
EC 97911-07
SCALE 3" = 1'-0"
CAD Details SHEAR BLOCK
= TF_VG_450-SB-Back--CAD.zip
450-VG-015
4-1/2"
(114.3) TYP.
450-017
CAD Details STICK
= TF_VG_450-Stick-Back--CAD.zip
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
060-119
450-017
4-1/2"
(114.3) TYP.
4-1/2" x 4-1/2" TUBE
450-017
TWO PIECE
NO POCKET CORNER
ONE POCKET
CORNER
450-VG-010
450-VG-010
450-VG-010
BRAKE METAL
FILLERS
450-VG-010
BRAKE METAL
FILLERS
BRAKE METAL
FILLERS
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
450-VG-010
450-VG-010
90o OUTSIDE
BRAKE METAL CORNER
TWO POCKET
BRAKE METAL POST
VARIABLE DEGREE
BRAKE METAL
OUTSIDE CORNER
450-VG-010
BRAKE METAL
FILLERS
BRAKE METAL
FILLERS
450-VG-010
450-VG-010
450-VG-010
90o INSIDE
BRAKE METAL CORNER
VARIABLE DEGREE
BRAKE METAL
INSIDE CORNER
kawneer.com
© Kawneer Company, Inc., 2009
CAD Details SCREW SPLINE
= TF_VG_450-SS-Back--CAD.zip
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
45
ENTRANCE FRAMING (BACK)
SCALE 3" = 1'-0"
CAD Details ENTRANCE = TF_VG_450-Entrance-Back--CAD.zip
NOTE: OTHER TYPES OF KAWNEER DOORS MAY BE USED WITH THIS FRAMING SYSTEM.
SEE ENTRANCE DETAILS FOR ADDITIONAL INFORMATION.
1
6
7
10
450-VG-033
INSERT
2
4
9
8
5
450-VG-019
3
3
450-VG-019
Transom area for both double or single acting doors with
glass surround. Jambs above transom bar are routed out
to accept glass holding insert.
ELEVATIONS ARE NUMBER KEYED TO DETAILS
SINGLE ACTING
1
DOUBLE ACTING
450-081
1
450-502
450-500
450-VG-001
450-VG-001
4-1/2"
(114.3) TYP.
10
450-022
450-022
450-VG-022
450-VG-022
451-VG-004
2
2
450-VG-019
451-VG-004
450-081
4
10
5
450-VG-019
450-502
450-500
069-177
4-1/2"
(114.3)
TYP.
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
7
6
1-3/4"
(44.5)
TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450 FRAMING INCORPORATING KAWNEER® “190” DOORS.
1-3/4"
(44.5)
TYP.
069-177
SINGLE ACTING DOOR
450-VG-019
450-VG-019
8
3
3
069-139
SINGLE ACTING DOOR
WITH TRANSOM
kawneer.com
9
069-143
DOUBLE ACTING DOOR
WITH TRANSOM
DOUBLE ACTING DOOR
kawneer.com
© Kawneer Company, Inc., 2009
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
46
JANUARY, 2009
EC 97911-07
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JANUARY, 2009
EC 97911-07
kawneer.com
TRIFAB® VG 450
(See appropriate Center, Front or Back Section
for Miscellaneous Details.)
47
INDEX (MULTI-PLANE)
BASIC FRAMING DETAILS......................................................... 48-53
TRIFAB® VG 450
48
JANUARY, 2009
BASIC FRAMING DETAILS (MULTI-PLANE - Outside Glazed)
EC 97911-07
SCREW SPLINE ASSEMBLY
BACK
FRONT
10
7
FRONT
CENTER
11
12
13
2
5
8
3
6
9
14
ELEVATION IS NUMBER KEYED TO DETAILS
CAD Details MULTI-PLANE (SCREW SPLINE)
= TF_VG_450-SS+SB-MULTI--CAD.zip
10
JAMB
11
VERTICAL
450-CG-002
450-VG-001
12
VERTICAL
450-VG-052
450-VG-001
13
VERTICAL
14
JAMB
450-CG-028
450-VG-069
4-1/2"
(114.3) TYP.
450-VG-001
1-3/4"
(44.5)
TYP.
1
HEAD
450-VG-004
4
HEAD
450-VG-003
450-VG-026
8
HORIZONTAL
450-VG-104
450-CG-004
450-VG-001
450-VG-001
450-CG-011
450-CG-001
9
SILL
6
SILL
450-037
450-CG-003
4-1/2"
(114.3) TYP.
450-VG-111
5
HORIZONTAL
3
SILL
450-CG-004
4-1/2"
(114.3) TYP.
450-VG-011
2
HORIZONTAL
7
HEAD
450-VG-104
4-1/2"
(114.3)
450-VG-004
450-VG-103
1-3/4"
(44.5)
TYP.
CENTER
See Pages 12 thru 22 for all CENTER details.
1-3/4"
(44.5)
TYP.
BACK
See Pages 40 thru 45 for all BACK details.
1-3/4"
(44.5)
FRONT
See Pages 24 thru 37 for all FRONT details.
450-037
450-037
kawneer.com
© Kawneer Company, Inc., 2009
4
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SCALE 3" = 1'-0"
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
49
BASIC FRAMING DETAILS (MULTI-PLANE - Inside Glazed)
SCREW SPLINE ASSEMBLY
SCALE 3" = 1'-0"
1
4
BACK
11
12
2
5
8
3
6
9
14
ELEVATION IS NUMBER KEYED TO DETAILS
1-3/4"
(44.5)
TYP.
11
VERTICAL
450-CG-002
450-VG-001
450-VG-052
450-VG-001
13
VERTICAL
14
JAMB
450-CG-028
450-VG-069
4-1/2"
(114.3) TYP.
450-VG-001
12
VERTICAL
4
HEAD
450-VG-104
450-VG-104
kawneer.com
8
HORIZONTAL
450-VG-026
450-CG-011
450-VG-001
450-VG-001
450-CG-004
450-CG-001
9
SILL
6
SILL
450-037
450-CG-004
4-1/2"
(114.3) TYP.
450-VG-011
5
HORIZONTAL
3
SILL
450-CG-003
4-1/2"
(114.3) TYP.
450-VG-111
2
HORIZONTAL
7
HEAD
450-VG-003
4-1/2"
(114.3)
450-VG-004
450-VG-103
1-3/4"
(44.5)
TYP.
CENTER
See Pages 12 thru 22 for all CENTER details.
450-VG-004
BACK
See Pages 40 thru 45 for all BACK details.
1-3/4"
(44.5)
FRONT
See Pages 24 thru 37 for all FRONT details.
1
HEAD
© Kawneer Company, Inc., 2009
13
CAD Details MULTI-PLANE (SCREW SPLINE)
= TF_VG_450-SS+SB-MULTI--CAD.zip
10
JAMB
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
FRONT
CENTER
1-3/4"
(44.5)
TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
FRONT
10
7
450-037
450-037
TRIFAB® VG 450
50
JANUARY, 2009
BASIC FRAMING DETAILS (MULTI-PLANE - Outside Glazed)
EC 97911-07
SHEAR BLOCK ASSEMBLY
BACK
FRONT
10
7
FRONT
CENTER
11
12
13
2
5
8
3
6
9
14
ELEVATION IS NUMBER KEYED TO DETAILS
CAD Details MULTI-PLANE (SHEAR BLOCK)
= TF_VG_450-SS+SB-MULTI--CAD.zip
10
JAMB
11
VERTICAL
450-CG-002
450-VG-001
12
VERTICAL
450-VG-052
450-VG-001
13
VERTICAL
14
JAMB
450-CG-028
450-VG-069
4-1/2"
(114.3) TYP.
450-VG-001
Note: Transition verticals are required to be two piece.
1-3/4"
(44.5)
TYP.
1
HEAD
450-VG-004
4
HEAD
450-VG-003
450-VG-103
7
HEAD
1-3/4"
(44.5)
TYP.
CENTER
See Pages 12 thru 22 for all CENTER details.
1-3/4"
(44.5)
TYP.
BACK
See Pages 40 thru 45 for all BACK details.
1-3/4"
(44.5)
TYP.
FRONT
See Pages 24 thru 37 for all FRONT details.
450-CG-004
450-VG-104
4-1/2"
(114.3) TYP.
4-1/2"
(114.3) TYP.
450-VG-011
450-VG-004
450-VG-111
8
HORIZONTAL
5
HORIZONTAL
2
HORIZONTAL
450-VG-026
450-VG-104
450-CG-011
450-CG-001
9
SILL
6
SILL
450-037
450-CG-004
450-VG-001
450-VG-001
3
SILL
450-CG-003
450-037
450-037
kawneer.com
© Kawneer Company, Inc., 2009
4
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SCALE 3" = 1'-0"
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
51
BASIC FRAMING DETAILS (MULTI-PLANE - Inside Glazed)
SHEAR BLOCK ASSEMBLY
SCALE 3" = 1'-0"
1
4
BACK
11
12
2
5
8
3
6
9
14
ELEVATION IS NUMBER KEYED TO DETAILS
Note: Transition verticals are required to be two piece
1-3/4"
(44.5)
TYP.
11
VERTICAL
450-CG-002
450-VG-001
450-VG-052
450-VG-001
13
VERTICAL
14
JAMB
450-CG-028
450-VG-069
4-1/2"
(114.3) TYP.
450-VG-001
12
VERTICAL
4
HEAD
450-VG-111
450-VG-104
kawneer.com
450-CG-011
450-CG-004
8
HORIZONTAL
450-VG-026
450-VG-001
450-VG-001
450-CG-001
9
SILL
6
SILL
450-037
450-CG-004
450-VG-011
5
HORIZONTAL
3
SILL
450-CG-003
4-1/2"
(114.3) TYP.
4-1/2"
(114.3) TYP.
2
HORIZONTAL
7
HEAD
450-VG-003
450-VG-104
450-VG-004
450-VG-103
1-3/4"
(44.5)
TYP.
CENTER
See Pages 12 thru 22 for all CENTER details.
450-VG-004
BACK
See Pages 40 thru 45 for all BACK details.
1-3/4"
(44.5)
TYP.
FRONT
See Pages 24 thru 37 for all FRONT details.
1
HEAD
© Kawneer Company, Inc., 2009
13
CAD Details MULTI-PLANE (SHEAR BLOCK)
= TF_VG_450-SS+SB-MULTI--CAD.zip
10
JAMB
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
FRONT
CENTER
1-3/4"
(44.5)
TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
FRONT
10
7
450-037
450-037
TRIFAB® VG 450
52
JANUARY, 2009
BASIC FRAMING DETAILS (MULTI-PLANE - Outside Glazed)
EC 97911-07
STICK ASSEMBLY
FRONT
4
BACK
FRONT
10
12
13
2
5
8
3
6
9
14
ELEVATION IS NUMBER KEYED TO DETAILS
Note: Transition verticals are required to be two piece.
1-3/4"
(44.5)
TYP.
11
VERTICAL
450-VG-052
450-VG-001
13
VERTICAL
14
JAMB
450-CG-028
450-CG-002
450-VG-001
4-1/2"
(114.3) TYP.
450-VG-069
10
JAMB
FRONT
CENTER
11
CAD Details MULTI-PLANE (STICK)
= TF_VG_450-Stick-MULTI--CAD.zip
450-VG-001
7
12
VERTICAL
450-VG-111
450-VG-026
450-VG-104
3
SILL
2-1/4"
(57.2)
450-CG-004
450-CG-003
8
HORIZONTAL
450-CG-007
450-VG-007
2-1/4"
(57.15)
451-VG-106
450-CG-002
5
HORIZONTAL
450-VG-007
450-CG-008
7
HEAD
4
HEAD
450-VG-011
451-VG-006
450-CG-004
450-VG-104
2
HORIZONTAL
2-1/4"
(57.15)
450-VG-108
450-VG-008
1
HEAD
450-VG-004
451-VG-006
451-VG-106
6
SILL
2-1/4"
(57.2)
450-VG-004
451-VG-006
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
CENTER
See Pages 12 thru 22 for all CENTER details.
2-1/4"
(57.15)
BACK
See Pages 40 thru 45 for all BACK details.
2-1/4"
(57.15)
FRONT
See Pages 24 thru 37 for all FRONT details.
451-VG-106
9
SILL
kawneer.com
© Kawneer Company, Inc., 2009
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SCALE 3" = 1'-0"
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
53
BASIC FRAMING DETAILS (MULTI-PLANE - Inside Glazed)
STICK ASSEMBLY
SCALE 3" = 1'-0"
1
BACK
FRONT
10
11
12
5
8
3
6
9
1-3/4"
(44.5)
TYP.
11
VERTICAL
450-VG-001
13
VERTICAL
14
JAMB
BACK
CENTER
See Pages 40 thru 45 for all BACK details.
See Pages 12 thru 22 for all CENTER details.
450-VG-006
451-VG-006
2-1/4"
(57.2)
2-1/4"
(57.15)
451-VG-006
450-VG-108
450-VG-052
450-CG-028
12
VERTICAL
FRONT
See Pages 24 thru 37 for all FRONT details.
450-CG-002
450-VG-001
2-1/4"
(57.15)
14
13
2
450-VG-069
450-VG-001
FRONT
CENTER
ELEVATION IS NUMBER KEYED TO DETAILS
Note: Transition verticals are required to be two piece
CAD Details MULTI-PLANE (STICK)
= TF_VG_450-Stick-MULTI--CAD.zip
10
JAMB
450-VG-004
450-VG-104
450-VG-008
1
HEAD
450-CG-008
450-CG-002
450-VG-004
450-VG-011
450-VG-104
450-CG-003
450-VG-026
2
HORIZONTAL
3
SILL
kawneer.com
450-CG-007
450-VG-007
2-1/4"
(57.2)
2-1/4"
(57.15)
2-1/4"
(57.15)
451-VG-106
451-VG-130
450-CG-004
8
HORIZONTAL
5
HORIZONTAL
450-VG-007
450-CG-004
7
HEAD
4
HEAD
450-VG-111
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
7
4-1/2"
(114.3) TYP.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
FRONT
4
451-VG-106
6
SILL
451-VG-106
9
SILL
kawneer.com
© Kawneer Company, Inc., 2009
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
54
JANUARY, 2009
EC 97911-07
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
55
INDEX (CHARTS)
CENTER .................................................................................... 56-58
FRONT or BACK....................................................................... 59,60
FRONT (SSG/WEATHERSEAL) .................................................... 61
MULTI-PLANE................................................................................ 62
EXPANSION MULLIONS ............................................................... 63
ENTRANCE FRAMING ............................................................. 64-66
DEADLOAD CHARTS ................................................................ 67,68
END REACTION CHARTS ............................................................... 69
THERMAL CHARTS .................................................................... 70,73
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WINDLOAD CHARTS
kawneer.com
TRIFAB® VG 450
56
JANUARY, 2009
WINDLOAD CHARTS (CENTER)
EC 97911-07
NOTE:
If the end reaction of the mullion (mullion spacing (ft.) times height (ft.) times specified windload (psf) divided by two) is more than 500 lbs., the optional
Mullion Anchors must be used. Consult Application Engineering. (Mullion Anchor not used with Lightweight Receptor.)
WIDTH IN METERS
1
1.5
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
2
2
10
3
9
A
8
B
C
D
7
E
6
5
2.5
2
1.5
4
1
2
3
4
5
6
7
8
HEIGHT IN FEET
3.5
11
4
13
HEIGHT IN METERS
12
12
3.5
11
A3
10
B
C 2.5
D
E
9
8
7
2
450-CG-001
450-CG-002
6
I = 2.899 (120.67 x 104)
S = 1.288 (21.11 x 103)
4
5
1.5
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
HEIGHT IN METERS
4
13
WIDTH IN METERS
.5
2
1
1.5
2
15
15
14
14
4
12
B 3.5
11
C
D
10
3
E
9
2.5
8
7
2
6
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
A
11
4
B
C 3.5
D
10
E3
13
HEIGHT IN FEET
A
HEIGHT IN METERS
13
12
9
2.5
8
7
450-CG-001
450-CG-002
WITH 450-110 STEEL
4
IA = 2.899 (120.67 x 10 )
SA = 1.288 (21.11 x 103)
HEIGHT IN METERS
HEIGHT IN FEET
1.5
14
14
HEIGHT IN FEET
1
15
15
2
6
5
1.5
4
1
2
3
4
5
6
7
8
WIDTH IN FEET
IS = 1.935 (80.54 x 104)
SS = 0.938 (15.37 x 103)
kawneer.com
© Kawneer Company, Inc., 2009
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
E = 40 PSF (1920 Pa)
WITH HORIZONTALS
.5
(720 Pa)
(960 Pa)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
A = 15 PSF
B = 20 PSF
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L\175 up to 13'-6" and L\240 + 1/4" above 13'-6".
These curves are for mullions WITH and WITHOUT HORIZONTALS and are based on precise engineering calculations for stress and deflection.
Allowable windload stress for ALUMINUM 15,152 P.S.I. (104 MPa), FORMED STEEL 30,000 P.S.I. (207 MPa), STEEL BAR 20,000 P.S.I. (138 MPa).
Charted curves, in all cases, are for the limiting value. For special situations not covered by these curves, contact your Kawneer representative for
additional information.
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
WINDLOAD CHARTS (CENTER)
(720 Pa)
(960 Pa)
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
E = 40 PSF (1920 Pa)
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
.5
2
A3
10
9
B
C 2.5
D
E
2
8
1.5
4
1
2
3
4
5
6
7
12
A
10
B
3
C
D
E 2.5
9
8
7
8
450-CG-013
450-CG-002
6
I = 4.481 (186.51 x 104)
S = 1.991 (32.63 x 103)
4
5
1.5
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
1
1.5
3.5
11
2
6
5
HEIGHT IN FEET
3.5
11
4
13
HEIGHT IN METERS
12
7
WIDTH IN METERS
2
.5
15
1
1.5
2
15
14
14
B
C
11
10
D
E
9
3.5
3
2.5
8
7
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
A
12
B
3.5
C
D
3
E
11
10
9
2.5
8
7
2
6
4
13
2
450-CG-013
450-CG-002
with 400-110 STEEL
IA = 4.481 (186.51 x 104)
SA = 1.991 (32.63 x 103)
IS = 0.970 (40.37 x 104)
SS = 0.535 (8.76 x 103)
6
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
HEIGHT IN METERS
12
HEIGHT IN FEET
A
HEIGHT IN METERS
4
13
HEIGHT IN FEET
2
HEIGHT IN METERS
4
13
.5
© Kawneer Company, Inc., 2009
1.5
14
14
kawneer.com
1
15
15
HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = 15 PSF
B = 20 PSF
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
57
TRIFAB® VG 450
JANUARY, 2009
WINDLOAD CHARTS (CENTER)
EC 97911-07
(720 Pa)
(960 Pa)
E = 40 PSF (1920 Pa)
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
2
.5
15
2
14
4
3.5
11
10
3
9
A
8
B
C
D
7
6
2.5
3
4
5
6
7
10
3
A
B
C 2.5
D
E
2
9
8
6
5
I = 2.523 (105.01 x 104)
S = 1.121 (18.37 x 103)
4
2
3.5
11
7
450-CG-005
1.5
1
12
2
E
5
4
13
HEIGHT IN FEET
12
HEIGHT IN METERS
13
8
1.5
4
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
2
.5
15
1
1.5
2
15
14
14
12
4
B 3.5
11
10
C
D
9
E
3
2.5
8
7
A
13
HEIGHT IN FEET
A
HEIGHT IN METERS
13
4
B
12
3.5
C
D
E3
11
10
9
2.5
8
7
2
HEIGHT IN METERS
HEIGHT IN FEET
1.5
HEIGHT IN METERS
14
HEIGHT IN FEET
1
15
2
6
6
5
1.5
450-CG-005
with 450-110 STEEL
4
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
IA = 2.523 (105.01 x 104)
SA = 1.121 (18.37 x 103)
1
2
3
4
5
6
7
8
WIDTH IN FEET
IS = 1.935 (80.54 x 104)
SS = 0.938 (15.37 x 103)
kawneer.com
© Kawneer Company, Inc., 2009
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = 15 PSF
B = 20 PSF
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
58
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
WINDLOAD CHARTS (FRONT or BACK)
(720 Pa)
(960 Pa)
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
E = 40 PSF (1920 Pa)
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
2
.5
15
3
A
B 2.5
9
8
7
C
D
6
E
3
4
5
6
7
3.5
11
A3
B
C
2.5
D
E
10
9
8
2
1.5
2
12
7
2
4
1
4
8
450-VG-012
450-VG-026
6
I = 3.074 (127.95 x 104)
S = 1.192 (19.53 x 103)
4
5
1.5
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
WIDTH IN METERS
1
1.5
HEIGHT IN METERS
10
HEIGHT IN FEET
3.5
11
5
2
.5
15
1
1.5
2
15
14
14
11
B
10
C3
D
3.5
9
E
8
2.5
7
13
HEIGHT IN FEET
A
HEIGHT IN METERS
12
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
4
B 3.5
11
C
D
10
E
9
3
2.5
8
7
2
6
A
12
2
450-VG-012
450-VG-026
with 1" x 2-1/2" STEEL BAR
IA = 3.074 (127.95 x 104)
SA = 1.192 (19.53 x 103)
IS = 1.302 (54.19 x 104)
SS = 1.042 (17.08 x 103)
6
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
HEIGHT IN METERS
4
13
HEIGHT IN FEET
2
13
HEIGHT IN METERS
12
.5
© Kawneer Company, Inc., 2009
1.5
14
4
13
kawneer.com
1
15
14
HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = 15 PSF
B = 20 PSF
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
59
TRIFAB® VG 450
JANUARY, 2009
WINDLOAD CHARTS (FRONT or BACK)
(720 Pa)
(960 Pa)
E = 40 PSF (1920 Pa)
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
.5
2
2
10
3
A
B 2.5
9
8
7
C
D
6
E
5
3
4
5
6
7
3.5
11
A3
B
C
2.5
D
E
10
9
8
7
2
6
450-VG-005
5
I = 2.978 (123.95 x 104)
S = 1.192 (19.53 x 103)
4
2
12
2
1.5
1
HEIGHT IN FEET
3.5
11
HEIGHT IN METERS
12
4
13
8
1.5
4
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
HEIGHT IN METERS
4
13
WIDTH IN METERS
2
.5
15
1
1.5
2
15
14
14
4
A
11
B
C3
D
10
9
E
8
3.5
2.5
7
HEIGHT IN FEET
12
4
13
HEIGHT IN METERS
13
A
12
B 3.5
11
C
D
10
E
9
3
2.5
8
7
2
HEIGHT IN METERS
HEIGHT IN FEET
1.5
14
14
HEIGHT IN FEET
1
15
15
2
6
6
5
1.5
450-VG-005
with 1" x 2-1/2" STEEL BAR
4
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
IA = 2.978 (123.95 x 104)
SA = 1.192 (19.53 x 103)
1
2
3
4
5
6
7
8
WIDTH IN FEET
IS = 1.302 (54.19 x 104)
SS = 1.042 (17.08 x 103)
kawneer.com
© Kawneer Company, Inc., 2009
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = 15 PSF
B = 20 PSF
EC 97911-07
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
60
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
WINDLOAD CHARTS (SSG/WEATHERSEAL)
(720 Pa)
(960 Pa)
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
E = 40 PSF (1920 Pa)
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
.5
2
1.5
2
14
4
3.5
11
10
3
9
A
8
E
D
C
2.5
B
7
HEIGHT IN FEET
12
4
13
HEIGHT IN METERS
13
12
3.5
11
10
3
A
9
2.5
8
E
D
C
B
7
2
2
6
6
5
450-SSG-005
1.5
1
2
3
4
5
6
7
5
I = 2.445 (101.76 x 104)
S = 1.352 (22.15 x 103)
4
8
1.5
4
1
3
4
5
6
7
8
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
1
1.5
WIDTH IN METERS
2
.5
15
1
1.5
2
15
14
14
3.5
E
D
C
B
10
3
9
2.5
8
7
HEIGHT IN FEET
A
11
HEIGHT IN METERS
12
4
13
A
12
3.5
11
E
D
C
B
10
3
9
2.5
8
7
2
2
6
6
5
1.5
450-SSG-005
with 1" x 2-1/2" STEEL BAR
4
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
IA = 2.445 (101.76 x 104)
SA = 1.352 (22.15 x 103)
IS = 1.302 (54.19 x 104)
SS = 1.042 (17.08 x 103)
1
2
3
4
5
6
WIDTH IN FEET
7
8
HEIGHT IN METERS
4
13
HEIGHT IN FEET
2
WIDTH IN FEET
WIDTH IN METERS
kawneer.com
HEIGHT IN METERS
14
.5
© Kawneer Company, Inc., 2009
1
15
15
HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = 15 PSF
B = 20 PSF
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
61
TRIFAB® VG 450
62
JANUARY, 2009
WINDLOAD CHARTS (MULTI-PLANE)
A = 15 PSF
B = 20 PSF
WITH HORIZONTALS
1
1.5
(720 Pa)
(960 Pa)
WITHOUT HORIZONTALS
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
WIDTH IN METERS
.5
EC 97911-07
2
WIDTH IN METERS
.5
E = 40 PSF (1920 Pa)
15
B 2.5
8
C
D
7
6
1.5
2
3
4
5
6
7
8
E
7
2
4
1
9
2
E
5
A
3
B
C
D 2.5
10
8
WIDTH IN FEET
450-VG-069
450-VG-069
6
I = 3.246 (135.10 x 104)
S = 1.132 (18.55 x 103)
4
5
1.5
2
1
WITH HORIZONTALS
1
1.5
4
5
6
7
8
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
3
WIDTH IN FEET
WIDTH IN METERS
2
.5
15
1
1.5
2
15
14
14
10
6
3
A
B 2.5
C
D
2
E
5
1.5
9
8
7
2
3
4
5
6
7
12
3.5
11
A3
B
C
2.5
D
E
10
9
8
7
2
4
1
HEIGHT IN FEET
3.5
11
HEIGHT IN METERS
12
4
13
8
450-VG-001
450-CG-002
6
I = 3.031 (126.15 x 104)
S = 1.239 (23.30 x 103)
4
5
1.5
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
HEIGHT IN METERS
4
13
WIDTH IN METERS
.5
2
1
1.5
2
15
15
14
4
3.5
11
10
3
A
B 2.5
9
8
7
C
D
6
E
5
1
2
3
4
5
6
WIDTH IN FEET
7
8
12
3.5
11
A3
10
B
C
2.5
D
E
9
8
7
2
2
1.5
4
HEIGHT IN FEET
12
4
13
HEIGHT IN METERS
13
HEIGHT IN METERS
14
450-VG-052
450-CG-028
6
I = 2.998 (124.79 x 104)
S = 1.235 (20.24 x 103)
4
5
1.5
1
2
3
4
5
6
7
8
WIDTH IN FEET
kawneer.com
© Kawneer Company, Inc., 2009
3
A
9
3.5
11
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
10
12
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
3.5
11
4
13
HEIGHT IN FEET
12
HEIGHT IN METERS
HEIGHT IN FEET
2
HEIGHT IN METERS
4
13
HEIGHT IN FEET
1.5
14
14
HEIGHT IN FEET
1
15
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
WINDLOAD CHARTS (EXPANSION MULLIONS)
A = 15 PSF
B = 20 PSF
WITH HORIZONTALS
.5
1
1.5
(720 Pa)
(960 Pa)
WITHOUT HORIZONTALS
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
WIDTH IN METERS
2
WIDTH IN METERS
.5
E = 40 PSF (1920 Pa)
15
2
11
A
10
9
3
B
C 2.5
D
E
2
8
7
1.5
4
1
2
3
4
5
6
7
3.5
11
A
B3
10
C
D
2.5
E
9
8
7
2
6
5
12
8
WIDTH IN FEET
450-CG-540
450-CG-010
6
I = 3.846 (160.08 x 104)
S = 1.710 (28.02 x 103)
4
5
1.5
1
2
1.5
4
5
6
7
8
WITHOUT HORIZONTALS
WIDTH IN METERS
1
3
WIDTH IN FEET
WITH HORIZONTALS
.5
WIDTH IN METERS
.5
2
1
1.5
2
15
15
14
12
A
3.5
B
C3
D
11
10
9
E
8
2.5
7
4
13
HEIGHT IN FEET
4
HEIGHT IN METERS
13
A
12
B 3.5
11
C
D
10
E
9
2.5
8
7
2
2
1.5
4
1
WIDTH IN FEET
I = 3.846 (160.08 x 104)
S = 1.710 (28.02 x 103)
WITH HORIZONTALS
IS = 0.970 (40.37 x 104)
SS = 0.535 (8.76 x 103)
2
3
4
5
6
7
6
450-CG-540
450-CG-010
WITH 400-110 STEEL
6
5
8
5
1.5
4
1
1
1.5
4
5
6
7
8
WIDTH IN METERS
2
.5
1
1.5
2
15
14
4
3.5
11
A
10
3
B
C 2.5
D
E
2
9
8
7
6
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
HEIGHT IN FEET
12
4
13
HEIGHT IN METERS
13
12
3.5
11
A
B3
C
D
2.5
E
10
9
8
7
2
450-VG-540
450-VG-010
6
I = 4.117 (171.36 x 104)
S = 1.704 (27.92 x 103)
4
5
1.5
1
2
3
4
5
6
WIDTH IN FEET
7
8
HEIGHT IN METERS
14
HEIGHT IN FEET
3
WITHOUT HORIZONTALS
15
© Kawneer Company, Inc., 2009
2
WIDTH IN FEET
WIDTH IN METERS
.5
3
HEIGHT IN METERS
14
kawneer.com
HEIGHT IN METERS
3.5
HEIGHT IN FEET
12
4
13
HEIGHT IN METERS
HEIGHT IN FEET
1.5
14
4
13
HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1
15
14
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
63
TRIFAB® VG 450
JANUARY, 2009
WINDLOAD CHARTS (ENTRANCES)
EC 97911-07
(720 Pa)
B = 20 PSF (960 Pa)
C = 25 PSF (1200 Pa)
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
2
.5
15
14
2
3
9
A
8
7
B
C
D
6
E
5
2.5
2
1.5
2
1
3
4
5
6
7
3
A
B
C 2.5
D
E
9
8
7
6
450-019
5
I = 2.813 (117.08 x 104)
S = 1.250 (20.48 x 103)
8
10
2
450-501
4
3.5
11
1.5
4
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
HEIGHT IN METERS
10
12
HEIGHT IN FEET
3.5
11
4
13
HEIGHT IN METERS
12
WIDTH IN METERS
.5
2
1
1.5
2
15
15
14
14
12
B 3.5
11
C
D
10
3
E
9
2.5
8
7
2
6
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
4
11
B
C 3.5
D
10
E3
12
9
2.5
8
7
2
450-019
6
WITH 450-110 STEEL
5
450-501
5
A
13
HEIGHT IN FEET
A
HEIGHT IN METERS
13
4
4
IA = 2.813 (117.08 x 10 )
SA = 1.250 (20.48 x 103)
HEIGHT IN METERS
HEIGHT IN FEET
1.5
14
4
13
HEIGHT IN FEET
1
15
1.5
4
1
2
3
4
5
6
7
8
WIDTH IN FEET
IS = 1.935 (80.57 x 104)
SS = 0.938 (15.37 x 103)
kawneer.com
© Kawneer Company, Inc., 2009
D = 30 PSF (1440 Pa)
E = 40 PSF (1920 Pa)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = 15 PSF
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
64
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
WINDLOAD CHARTS (ENTRANCES)
(720 Pa)
(960 Pa)
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
E = 40 PSF (1920 Pa)
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
.5
2
10
3
A
9
B 2.5
C
D
E2
8
1.5
2
3
4
5
6
7
3.5
11
A
3
B
C
D 2.5
E
10
9
8
7
450-599
450-CG-002
4
1
12
2
6
5
HEIGHT IN FEET
3.5
11
4
13
HEIGHT IN METERS
12
7
6
450-064
450-CG-002
5
8
1.5
4
I = 3.226 (134.28 x 104)
S = 1.467 (24.04 x 103)
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
2
.5
15
1
1.5
2
15
14
12
B
11
C
D
10
E
9
3.5
3
2.5
8
7
5
1.5
1
2
3
4
5
6
WIDTH IN FEET
7
8
12
11
C 3.5
D
10
E
3
9
2.5
8
2
450-599
450-CG-002
450-064
450-CG-002
WITH 450-110 STEEL
4
4
B
7
2
6
A
13
HEIGHT IN FEET
13
4
HEIGHT IN METERS
A
IA = 3.226 (134.28 x 104)
SA = 1.467 (24.04 x 103)
IS = 1.935 (80.57 x 104)
SS = 0.938 (15.37 x 103)
6
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
HEIGHT IN METERS
14
HEIGHT IN FEET
2
HEIGHT IN METERS
4
13
© Kawneer Company, Inc., 2009
1.5
14
14
kawneer.com
1
15
15
HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = 15 PSF
B = 20 PSF
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
65
TRIFAB® VG 450
JANUARY, 2009
WINDLOAD CHARTS (ENTRANCES)
EC 97911-07
(720 Pa)
E = 40 PSF (1920 Pa)
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
WIDTH IN METERS
2
.5
15
14
2
10
3
9
A
B 2.5
8
7
C
D
6
E
5
3
4
5
6
7
A3
10
B
C
2.5
D
E
9
8
2
6
450-VG-019
5
I = 2.985 (124.24 x 104)
S = 1.244 (20.38 x 103)
4
2
3.5
11
7
2
1.5
1
12
8
1.5
4
1
2
3
4
5
6
7
8
WIDTH IN FEET
WIDTH IN FEET
WITH HORIZONTALS
WITHOUT HORIZONTALS
WIDTH IN METERS
.5
1
1.5
HEIGHT IN METERS
3.5
11
HEIGHT IN FEET
12
4
13
HEIGHT IN METERS
WIDTH IN METERS
.5
2
1
1.5
2
15
15
14
14
4
A
11
B
C3
D
10
9
E
8
3.5
2.5
7
HEIGHT IN FEET
12
4
13
HEIGHT IN METERS
13
A
12
B 3.5
11
C
D
10
E
9
2.5
8
7
2
2
6
5
1.5
4
1
2
3
4
5
6
WIDTH IN FEET
7
8
3
HEIGHT IN METERS
HEIGHT IN FEET
1.5
14
4
13
HEIGHT IN FEET
1
15
450-VG-019
WITH 1" x 2-1/2" STEEL BAR
6
IA = 2.985 (124.24 x 104)
SA = 1.244 (20.38 x 103)
4
5
1.5
1
2
3
4
5
6
7
8
WIDTH IN FEET
IS = 1.302 (54.19 x 104)
SS = 1.042 (17.08 x 103)
kawneer.com
© Kawneer Company, Inc., 2009
B = 20 PSF (960 Pa)
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = 15 PSF
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
66
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
67
DEADLOAD CHARTS
Horizontal or deadload limitations are based upon 1/8" (3.2) maximum allowable deflection at the center of an intermediate horizontal member.
The accompanying charts are calculated for 1/4" (6.4) thick glass supported on two setting blocks at the loading points shown.
C = (1/8 POINT LOADING)
WIDTH IN METERS
1
1.5
WIDTH IN METERS
2
1
11
10
3
7
2
6
5
1.5
4
3
C
B
A
2
1
450-CG-011
450-CG-003
2.5
8
7
2
6
5
1.5
4
1
3
2
.5
1
C
B .5
A
1
0
1
2
3
4
5
6
7
0
8
1
2
3
4
5
6
7
WIDTH IN FEET
WIDTH IN FEET
WIDTH IN METERS
WIDTH IN METERS
1.5
2
1
11
HEIGHT IN METERS
2.5
8
HEIGHT IN FEET
9
HEIGHT IN METERS
1.5
8
2
11
10
10
3
9
3
7
2
6
5
1.5
C
4
B
3
1
A
2
.5
1
450-VG-011
450-VG-111
HEIGHT IN FEET
2.5
8
HEIGHT IN METERS
9
2.5
8
7
2
6
5
1.5
4
3
C
B
2
A
1
.5
1
0
1
2
3
4
5
6
WIDTH IN FEET
kawneer.com
7
8
0
1
2
3
4
5
6
WIDTH IN FEET
7
8
HEIGHT IN METERS
HEIGHT IN FEET
2
10
3
9
HEIGHT IN FEET
1.5
11
1
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = (1/4 POINT LOADING)
B = (1/6 POINT LOADING)
TRIFAB® VG 450
68
JANUARY, 2009
DEADLOAD CHARTS
EC 97911-07
Horizontal or deadload limitations are based upon 1/8" (3.2) maximum allowable deflection at the center of an intermediate horizontal member.
The accompanying charts are calculated for 1/4" (6.4) thick glass supported on two setting blocks at the loading points shown.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
A = (1/4 POINT LOADING)
B = (1/6 POINT LOADING)
C = (1/8 POINT LOADING)
WIDTH IN METERS
1
1.5
2
11
10
3
2.5
8
7
2
6
5
1.5
4
1
3
HEIGHT IN METERS
HEIGHT IN FEET
9
450-SSG-011
C
B
2
.5
A
1
0
1
2
3
4
5
6
7
8
WIDTH IN FEET
DEADLOADS ON ENTRANCE TRANSOM BARS
WIDTH IN METERS
WIDTH IN METERS
1
1.5
1
2
2
10
3
3
7
2
6
5
1.5
4
C
3
B
A
2
1
.5
450-500
TRAY
450-502
SINGLE ACTING
T-BAR
450-081
DOUBLE ACTING
T-BAR
HEIGHT IN FEET
2.5
8
HEIGHT IN METERS
9
9
2.5
8
7
2
6
5
1.5
4
1
3
2
C
B
A
1
1
0
0
1
2
3
4
5
6
WIDTH IN FEET
7
8
1
2
3
4
5
6
7
HEIGHT IN METERS
10
HEIGHT IN FEET
1.5
11
11
.5
8
WIDTH IN FEET
kawneer.com
© Kawneer Company, Inc., 2009
A = (1/4 POINT LOADING)
B = (1/6 POINT LOADING)
C = (1/8 POINT LOADING)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Height limitations for transom glass over a doorway are based upon a 1/16" (1.6) maximum allowable deflection at the center of a transom bar.
The accompanying charts are calculated for 1/4" (6.4) thick glass supported on two setting blocks placed at the loading points shown.
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
69
END REACTION CHARTS
A = 15 PSF
B = 20 PSF
(720 Pa)
(960 Pa)
C = 25 PSF (1200 Pa)
D = 30 PSF (1440 Pa)
WITH HORIZONTALS
1
1.5
WIDTH IN METERS
2
.5
15
451-VG-006
2
14
4
13
12
4
13
A
12
3.5
11
3.5
3
9
A 2.5
8
7
B
6
2
5
C 1.5
4
D
3
E
451-VG-106
451-SSG-006
HEIGHT IN FEET
10
HEIGHT IN METERS
11
10
B
9
C
8
D
7
E
1
2
5
1.5
1
2
.5
1
0
0
2
3
4
5
6
7
8
2.5
6
3
.5
1
3
4
1
451-SSG-106
WIDTH IN FEET
1
2
3
4
5
6
WIDTH IN FEET
500lbs. Max. End Reaction
© Kawneer Company, Inc., 2009
1.5
7
8
HEIGHT IN METERS
14
kawneer.com
1
15
2
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
WITHOUT HORIZONTALS
E = 40 PSF (1920 Pa)
WIDTH IN METERS
.5
HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
For each application, end reactions MUST be checked. These charts are used to verify that the end reactions at the head and sill receptors are
500 lbs. (2224N) or less and will meet the specified windload.
TRIFAB® VG 450
JANUARY, 2009
THERMAL CHARTS
EC 97911-07
Project Specific U-factor Example Calculation
15'-8"
2'-0"
9'-6"
7'-0"
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
5'-0"
Example Glass U-factor = 0.42 Btu/hr·ft2·oF
Total Daylight Opening = 3(5' x 7') + 3(5' x 2') = 135ft2
Total Projected Area
= (Total Daylight Opening + Total Area of Framing System)
= 15'-8" x 9'-6" = 148.83ft2
Percent of Glass
= (Total Daylight Opening ÷ Total Projected Area)
= (135 ÷ 148.83)100 = 91%
System U-factor vs Percent of Glass Area
0.80
0.60
0.55
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.50
0.45
0.40
0.35
0.49
0.30
0.25
91%
70
75
80
85
90
0.20
Percent of Glass
Based on 91% glass and Center of Glass (COG) U-factor of 0.42
System U-factor is equal to 0.49 Btu/hr·ft2·oF
kawneer.com
© Kawneer Company, Inc., 2009
0.65
System U-factor (BTU/hr·ft2·oF)
0.70
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.75
95
70
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
71
THERMAL CHARTS
TRIFAB® VG 450 (CENTER)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-factor vs Percent of Glass Area
1.50
1.45
1.35
1.30
1.25
COG
U-factor
1.20
1.15
1.10
1.06
1.04
1.02
1.00
0.98
0.96
0.94
0.92
0.90
1.05
1.00
0.95
Percent of Glass = Vision Area/Total Area
(Total Daylight Opening / Projected Area)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values and are obtained from your glass supplier.
kawneer.com
70
75
80
85
90
95
0.85
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.90
System U-factor (BTU/hr·ft2·oF)
1.40
TRIFAB® VG 450
JANUARY, 2009
THERMAL CHARTS
EC 97911-07
TRIFAB® VG 450 (CENTER)
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
0.85
0.85
0.80
0.80
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.90
0.90
0.75
0.75
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
System SHGC
0.70
0.70
0.15
70
75
80
85
90
95
0.10
Vision Area / Total Area (%)
0.90
0.90
0.85
0.85
0.80
0.80
0.75
0.75
0.70
0.70
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
System VT
0.65
0.65
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
70
75
80
85
90
0.10
Vision Area / Total Area (%)
kawneer.com
© Kawneer Company, Inc., 2009
COG
VT
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
System Visible Transmittance (VT) vs Percent of Vision Area
95
72
TRIFAB® VG 450
JANUARY, 2009
EC 97911-07
THERMAL PERFORMANCE MATRIX
TRIFAB® VG 450 (CENTER)
Glass U-Factor 3
Overall U-Factor 4
0.90
0.99
0.92
1.00
0.94
1.02
0.96
1.03
0.98
1.05
1.00
1.07
1.02
1.08
1.04
1.10
1.06
1.11
SHGC Matrix 2
Visible Transmittance 2
Glass SHGC 3
Overall Glass U-Factor 4
Glass VT 3
Overall VT 4
0.90
0.81
0.90
0.81
0.85
0.77
0.85
0.76
0.80
0.72
0.80
0.72
0.75
0.68
0.75
0.67
0.70
0.63
0.70
0.63
0.65
0.59
0.65
0.58
0.60
0.54
0.60
0.54
0.55
0.50
0.55
0.49
0.50
0.45
0.50
0.45
0.45
0.41
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.32
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.23
0.25
0.22
0.20
0.19
0.20
0.18
© Kawneer Company, Inc., 2009
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Thermal Transmittance 1
NOTE: For glass values that are not listed, linear interpolation is permitted.
1. U-Factors are determined in accordance with NFRC 100.
2. SHGC and VT values are determined in accordance with NFRC 200.
3. Glass properties are based on center of glass values and are obtained from your glass supplier.
4. Overall U-Factor, SHGC, and VT Matricies are based on the standard NFRC specimen size of
2000mm wide by 2000mm high (78-3/4" by 78-3/4").
kawneer.com
73
kawneer.com
© Kawneer Company, Inc., 2009
BLANK PAGE
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
TRIFAB® VG 450
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
74
JANUARY, 2009
EC 97911-07