VS-HFA70FA120 www.vishay.com Vishay Semiconductors HEXFRED® Ultrafast Soft Recovery Diode, 70 A FEATURES • Fast recovery time characteristic • Electrically isolated base plate • Large creepage distance between terminal • Simplified mechanical designs, rapid assembly • Designed and qualified for industrial level • UL approved file E78996 SOT-227 • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION / APPLICATIONS PRODUCT SUMMARY The dual diode series configuration (VS-HFA70FA120) is used for output rectification or freewheeling/clamping operation and high voltage application. VR 1200 V VF (typical) 2.3 V trr (typical) 51 ns IF(AV) per module at TC 70 A at 94 °C Package SOT-227 The semiconductor in the SOT-227 package is isolated from the copper base plate, allowing for common heatsinks and compact assemblies to be built. These modules are intended for general applications such as HV power supplies, electronic welders, motor control and inverters. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Cathode to anode voltage VR Continuous forward current per leg IF Single pulse forward current per leg IFSM Maximum power dissipation per module RMS isolation voltage PD VISOL Operating junction and storage temperature range TEST CONDITIONS MAX. UNITS 1200 V TC = 110 °C 35 TJ = 25 °C 380 A TC = 110 °C 174 W Any terminal to case, t = 1 min 2500 V -55 to +150 °C TJ, TStg ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Cathode to anode breakdown voltage Forward voltage Reverse leakage current SYMBOL VBR VFM IRM TEST CONDITIONS MIN. TYP. MAX. 1200 - - IF = 30 A - 2.30 3.00 IF = 60 A - 2.89 3.80 IF = 30 A, TJ = 125 °C - 2.14 2.44 IF = 60 A, TJ = 125 °C - 2.82 3.27 VR = VR rated - 1.2 75 TJ = 125 °C, VR = VR rated - 1.0 - TJ = 150 °C, VR = VR rated - 2.7 10 IR = 100 μA UNITS V μA mA Revision: 31-May-16 Document Number: 94289 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA70FA120 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER SYMBOL TEST CONDITIONS MIN. TYP. MAX. - 51 - TJ = 25 °C - 134 - TJ = 125 °C - 204 - - 12 - - 18 - TJ = 25 °C - 790 - TJ = 125 °C - 1770 - VR = 1200 V - 24 - pF MIN. TYP. MAX. UNITS - - 0.46 TJ = 25 °C Reverse recovery time trr Peak recovery current TJ = 25 °C IRRM Reverse recovery charge Qrr Junction capacitance CT TJ = 125 °C IF = 1 A dIF/dt = 200 A/μs VR = 30 V UNITS ns IF = 50 A dIF/dt = - 200 A/μs VR = 200 V A nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Junction to case, single leg conducting TEST CONDITIONS RthJC Junction to case, both legs conducting Case to heatsink RthCS Flat, greased surface Weight Mounting torque - - 0.23 - 0.10 - - 30 - g Nm (lbf.in) Torque to terminal - - 1.1 (9.7) Torque to heatsink - - 1.3 (11.5) Nm (lbf.in) Case style SOT-227 1000 10 000 TJ = 150 °C IR - Reverse Current (μA) IF - Instantaneous Forward Current (A) °C/W TJ = 150 °C 100 TJ = 125 °C TJ = 25 °C 10 1 1000 TJ = 125 °C 100 10 1 TJ = 25 °C 0.1 0.01 0.5 1 1.5 2 2.5 3 3.5 4 4.5 5 0 200 400 600 800 1000 1200 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage Revision: 31-May-16 Document Number: 94289 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA70FA120 www.vishay.com Vishay Semiconductors CT - Junction Capacitance (pF) 1000 100 10 10 100 1000 10 000 VR - Reverse Voltage (V) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage ZthJC - Thermal Impedance (°C/W) 1 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 DC 0.01 PDM t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC Single pulse (thermal resistance) 0.001 0.0001 0.001 0.01 0.1 1 . 10 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) 200 150 Average Power Loss (W) Allowable Case Temperature (°C) 175 125 100 DC 75 Square wave (d = 0.5) 80 % rated VR applied 50 25 150 RMS Limit 100 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 50 DC 0 0 0 10 20 30 40 50 60 70 80 90 IF - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) 0 10 20 30 40 50 60 70 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Losses Characteristics (Per Leg) Revision: 31-May-16 Document Number: 94289 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA70FA120 www.vishay.com Vishay Semiconductors 250 3000 VR = 200 V IF = 50 A 200 VR = 200 V IF = 50 A IF = 30 A 2500 IF = 30 A 125 °C 2000 100 Qrr (nC) trr (ns) 150 25 °C 125 °C 1500 1000 50 25 °C 500 0 0 100 1000 100 1000 dIF/dt (A/μs) dIF/dt (A/μs) Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt Fig. 8 - Typical Stored Charge vs. dIF/dt 35 VR = 200 V 30 IF = 30 A IF = 50 A Irr (nC) 25 20 125 °C 15 10 25 °C 5 0 100 1000 dIF/dt (A/μs) Fig. 9 - Typical Reverse Recovery Current vs. dIF/dt VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D G IRFP250 S Fig. 10 - Reverse Recovery Parameter Test Circuit Revision: 31-May-16 Document Number: 94289 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-HFA70FA120 www.vishay.com Vishay Semiconductors (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (4) Qrr - area under curve defined by trr and IRRM (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current Qrr = (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 11 - Reverse Recovery Waveform and Definitions ORDERING INFORMATION TABLE Device code VS- HF A 70 F A 120 1 2 3 4 5 6 7 1 - Vishay Semiconductors product 2 - HEXFRED® family 3 - Process designator (A = electron irradiated) 4 - Current rating (70 = 70 A) 5 - Circuit configuration (2 separate diodes, parallel pin-out) 6 - Package indicator (SOT-227 standard insulated base) 7 - Voltage rating (120 = 1200 V) CIRCUIT CONFIGURATION CIRCUIT CIRCUIT CONFIGURATION CODE CIRCUIT DRAWING Lead Assignment 2 separate diodes, parallel pin-out 4 3 1 2 4 3 1 2 F Revision: 31-May-16 Document Number: 94289 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000