VS-GT50TP60N www.vishay.com Vishay Semiconductors Half Bridge IGBT Power Module, 600 V, 50 A FEATURES • Low VCE(on) trench IGBT technology • 5 μs short circuit capability • VCE(on) with positive temperature coefficient • Maximum junction temperature 175 °C • Low inductance case • Fast and soft reverse recovery antiparallel FWD • Isolated copper baseplate using DCB (Direct Copper Bonding) technology INT-A-PAK • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 PRODUCT SUMMARY TYPICAL APPLICATIONS VCES 600 V • UPS (Uninterruptable Power Supply) IC at TC = 80 °C 50 A • Electronic welders VCE(on) (typical) at IC = 50 A, 25 °C 1.65 V • Switching mode power supplies Speed 8 kHz to 30 kHz Package INT-A-PAK Circuit Half bridge DESCRIPTION Vishay’s IGBT power module provides ultra low conduction loss as well as short circuit ruggedness. It is designed for applications such as UPS and SMPS. ABSOLUTE MAXIMUM RATINGS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL TEST CONDITIONS MAX. Collector to emitter voltage VCES 600 Gate to emitter voltage VGES ± 20 Collector current Pulsed collector current TC = 25 °C IC ICM (1) Diode continuous forward current IF Diode maximum forward current IFM (1) UNITS V 85 TC = 80 °C 50 tp = 1 ms 100 TC = 80 °C 50 tp = 1 ms 100 A Maximum power dissipation PD TJ = 175 °C 208 W Short circuit withstand time tSC TC = 125 °C 5 μs 4000 V RMS isolation voltage VISOL f = 50 Hz, t = 1 min Note (1) Repetitive rating: pulse width limited by maximum junction temperature. IGBT ELECTRICAL SPECIFICATIONS (TC = 25 °C unless otherwise noted) PARAMETER Collector to emitter breakdown voltage SYMBOL V(BR)CES Collector to emitter voltage VCE(on) Gate to emitter threshold voltage TEST CONDITIONS TJ = 25 °C MIN. TYP. MAX. 600 - - VGE = 15 V, IC = 50 A, TJ = 25 °C - 1.65 2.10 VGE = 15 V, IC = 50 A, TJ = 175 °C - 2.05 6.5 UNITS V VGE(th) VCE = VGE, IC = 1.4 mA, TJ = 25 °C 4.0 4.9 Collector cut-off current ICES VCE = VCES, VGE = 0 V, TJ = 25 °C - - 1.0 mA Gate to emitter leakage current IGES VGE = VGES, VCE = 0 V, TJ = 25 °C - - 400 nA Revision: 11-Jun-15 Document Number: 94666 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GT50TP60N www.vishay.com Vishay Semiconductors SWITCHING CHARACTERISTICS PARAMETER SYMBOL Turn-on delay time TEST CONDITIONS td(on) Rise time tr Turn-off delay time td(off) Fall time tf VCC = 300 V, IC = 50 A, Rg = 3.3 , VGE = ± 15 V, TJ = 25 °C MIN. TYP. MAX. - 58 - - 31 - - 80 - - 100 - Turn-on switching loss Eon - 0.41 - Turn-off switching loss Eoff - 0.42 - Turn-on delay time td(on) - 64 - tr - 37 - - 90 - Rise time Turn-off delay time td(off) Fall time tf VCC = 300 V, IC = 50 A, Rg = 3.3 , VGE = ± 15 V, TJ = 125 °C - 117 - Turn-on switching loss Eon - 0.69 - Turn-off switching loss Eoff - 0.69 - - 3.03 - - 0.25 - - 0.09 - - 450 - Input capacitance Cies Output capacitance Coes Reverse transfer capacitance Cres SC data ISC Stray inductance Module lead resistance, terminal to chip VGE = 0 V, VCE = 30 V, f = 1.0 MHz tp 5 μs, VGE = 15 V, TJ = 125 °C, VCC = 360 V, VCEM 600 V UNITS ns mJ ns mJ nF A LCE - - 30 nH RCC’+EE’ - 0.75 - m UNITS DIODE ELECTRICAL SPECIFICATIONS (TC = 25 °C unless otherwise noted) PARAMETER SYMBOL Forward voltage VF Reverse recovery charge Qrr Peak reverse recovery current Irr Reverse recovery energy TEST CONDITIONS IF = 50 A IF = 50 A, VR = 300 V, RG = 3.3 VGE = -15 V Erec MIN. TYP. MAX. TJ = 25 °C - 1.35 1.75 TJ = 125 °C - 1.37 - TJ = 25 °C - 2.3 - TJ = 125 °C - 4.3 - TJ = 25 °C - 33 - TJ = 125 °C - 58 - TJ = 25 °C - 0.56 - TJ = 125 °C - 1.11 - V μC A mJ THERMAL AND MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction temperature range Storage temperature range Junction to case per ½ module MIN. TYP. MAX. UNITS TJ TEST CONDITIONS - - 175 °C TStg -40 - 125 °C - - 0.72 - - 1.02 - 0.05 - IGBT Diode Case to sink (Conductive grease applied) RthJC RthCS Power terminal screw: M5 2.5 to 5.0 Mounting screw: M6 3.0 to 5.0 Mounting torque Weight K/W Nm Weight of module - 150 - g Revision: 11-Jun-15 Document Number: 94666 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GT50TP60N www.vishay.com Vishay Semiconductors 100 100 90 90 VGE = 15 V 70 70 25 °C 60 60 IC (A) IC (A) VCE (V) = 50 V 80 80 50 40 175 °C 50 175 °C 40 30 30 20 20 10 10 25 °C 0 0 0 0.5 1 1.5 2 2.5 3 3.5 4 5 6 VCE (V) 8 9 10 11 VGE (V) Fig. 1 - IGBT Typical Output Characteristics Fig. 3 - IGBT Switching Loss vs. IC 1.8 2.4 VCC = 300 V RG = 3.3 Ω VGE = ± 15 V TJ = 125 °C 1.6 1.4 2.2 1.8 1.6 1.0 0.8 0.6 1.4 Eon 1.2 1.0 0.8 Eoff Eoff 0.6 0.4 0.4 Eon 0.2 VCC = 300 V IC = 50 A VGE = ± 15 V TJ = 125 °C 2.0 E (mJ) 1.2 E (mJ) 7 0.2 0 0 0 10 20 30 40 50 60 70 80 0 90 100 5 10 15 20 25 30 35 RG (Ω) IC (A) Fig. 4 - IGBT Switching Loss vs. RG Fig. 2 - IGBT Transfer Characteristics 120 Module 100 IC (A) 80 60 40 RG = 3.3 Ω VGE = ± 15 V TJ = 125 °C 20 0 0 100 200 300 400 500 600 700 VCE (V) Fig. 5 - RBSOA Revision: 11-Jun-15 Document Number: 94666 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GT50TP60N www.vishay.com Vishay Semiconductors 1 ZthJC (K/W) IGBT 0.1 1 2 3 4 i: r i [K/W]: 0.0432 0.2376 0.2304 0.2088 0.01 0.02 0.05 0.1 τ i [s]: 0.01 0.001 0.01 0.1 1 10 t (s) Fig. 6 - IGBT Transient Thermal Impedance 100 1.8 90 1.6 80 1.4 1.2 60 E (mJ) IF (A) 70 VCC = 300 V RG = 3.3 Ω VGE = - 15 V TJ = 125 °C 50 40 1.0 Erec 0.8 0.6 30 125 °C 20 0.4 25 °C 0.2 10 0 0 0 0.25 0.5 0.75 1 1.25 1.5 1.75 0 2 10 20 30 40 50 60 70 80 90 100 IF (A) VF (V) Fig. 7 - Diode Forward Characteristics Fig. 8 - Diode Switching Loss vs. IF 1.2 1.1 Erec E (mJ) 1.0 0.9 0.8 VCC = 300 V IF = 50 A VGE = - 15 V TJ = 125 °C 0.7 0.6 0 5 10 15 20 25 30 35 RG (Ω) Fig. 9 - Diode Switching Loss vs. RG Revision: 11-Jun-15 Document Number: 94666 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-GT50TP60N www.vishay.com Vishay Semiconductors 10 Diode ZthJC (K/W) 1 0.1 1 2 3 4 i: ri [K/W]: 0.0612 0.3366 0.3264 0.2958 τ i [s]: 0.01 0.02 0.05 0.1 0.01 0.001 0.01 0.1 1 10 t (s) Fig. 10 - Diode Transient Thermal Impedance CIRCUIT CONFIGURATION 6 7 1 2 3 5 4 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95524 Revision: 11-Jun-15 Document Number: 94666 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Outline Dimensions www.vishay.com Vishay Semiconductors INT-A-PAK DIMENSIONS in millimeters (inches) Revision: 06-Aug-12 Document Number: 95524 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000