PANASONIC XP04601

Composite Transistors
XP04601 (XP4601)
Silicon NPN epitaxial planer transistor (Tr1)
Silicon PNP epitaxial planer transistor (Tr2)
0.2±0.05
5
6
●
4
Features
0.2±0.1
Two elements incorporated into one package.
Reduction of the mounting area and assembly cost by one half.
5°
●
0.12+0.05
–0.02
1.25±0.10
2.1±0.1
■
Unit: mm
(0.425)
For general amplification
1
2
3
(0.65) (0.65)
1.3±0.1
2.0±0.1
■ Basic Part Number of Element
■ Absolute Maximum Ratings
Parameter
Tr1
Tr2
0.9±0.1
(Ta=25˚C)
Symbol
Ratings
Unit
Collector to base voltage
VCBO
60
V
Collector to emitter voltage
VCEO
50
V
Emitter to base voltage
VEBO
7
V
Collector current
IC
100
mA
Peak collector current
ICP
200
mA
Collector to base voltage
VCBO
–60
V
Collector to emitter voltage
VCEO
–50
V
Emitter to base voltage
VEBO
–7
V
Collector current
IC
–100
mA
Peak collector current
ICP
–200
mA
Total power dissipation
PT
150
mW
Tj
150
˚C
Tstg
–55 to +150
˚C
Overall Junction temperature
Storage temperature
0.9+0.2
–0.1
2SD0601A(2SD601A) + 2SB0709A(2SB709A)
0 to 0.1
●
10°
1 : Emitter (Tr1)
4 : Emitter (Tr2)
2 : Base (Tr1)
5 : Base (Tr2)
3 : Collector (Tr2) 6 : Collector (Tr1)
EIAJ : SC–88
SMini6-G1 Package
Marking Symbol: 5C
Internal Connection
1
Tr1
5
2
3
6
Tr2
4
Note) The Part number in the Parenthesis shows conventional part number.
1
Composite Transistors
■ Electrical Characteristics
●
(Ta=25˚C)
Tr1
Parameter
Collector to base voltage
Symbol
Conditions
min
typ
max
Unit
VCBO
IC = 10µA, IE = 0
60
V
Collector to emitter voltage
VCEO
IC = 2mA, IB = 0
50
V
Emitter to base voltage
VEBO
IE = 10µA, IC = 0
7
V
Collector cutoff current
ICBO
VCB = 20V, IE = 0
0.1
µA
ICEO
VCE = 10V, IB = 0
100
µA
Forward current transfer ratio
hFE
VCE = 10V, IC = 2mA
Collector to emitter saturation voltage
VCE(sat)
IC = 100mA, IB = 10mA
0.1
Transition frequency
fT
VCB = 10V, IE = –2mA, f = 200MHz
150
MHz
Collector output capacitance
Cob
VCB = 10V, IE = 0, f = 1MHz
3.5
pF
●
160
460
0.3
V
Tr2
Parameter
Collector to base voltage
Symbol
Conditions
min
typ
max
Unit
VCBO
IC = –10µA, IE = 0
–60
Collector to emitter voltage
VCEO
IC = –2mA, IB = 0
–50
V
Emitter to base voltage
VEBO
IE = –10µA, IC = 0
–7
V
Collector cutoff current
2
XP04601
V
ICBO
VCB = –20V, IE = 0
– 0.1
µA
ICEO
VCE = –10V, IB = 0
–100
µA
Forward current transfer ratio
hFE
VCE = –10V, IC = –2mA
Collector to emitter saturation voltage
VCE(sat)
IC = –100mA, IB = –10mA
160
460
Transition frequency
fT
VCB = –10V, IE = 1mA, f = 200MHz
80
MHz
Collector output capacitance
Cob
VCB = –10V, IE = 0, f = 1MHz
2.7
pF
– 0.3
– 0.5
V
Composite Transistors
XP04601
Common characteristics chart
PT — Ta
Total power dissipation PT (mW)
250
200
150
100
50
0
0
20
40
60
80 100 120 140 160
Ambient temperature Ta (˚C)
Characteristics charts of Tr1
IC — VCE
IB — VBE
IC — VBE
240
1200
60
Ta=25˚C
200
40
120µA
100µA
30
80µA
20
60µA
40µA
Base current IB (µA)
140µA
Collector current IC (mA)
1000
50
Collector current IC (mA)
VCE=10V
VCE=10V
Ta=25˚C
IB=160µA
800
600
400
25˚C
120
Ta=75˚C
–25˚C
80
40
200
10
160
20µA
0
0
0
2
4
6
8
0
10
0.2
0.6
0.8
IC — IB
Collector to emitter saturation voltage VCE(sat) (V)
100
VCE=10V
Ta=25˚C
200
160
120
80
40
0
200
400
600
0.4
800
Base current IB (µA)
1000
10
3
1
0.3
25˚C
0.01
0.1
Ta=75˚C
–25˚C
0.3
1
3
10
1.6
2.0
600
IC/IB=10
0.03
1.2
hFE — IC
30
0.1
0.8
Base to emitter voltage VBE (V)
VCE(sat) — IC
240
0
0
1.0
Base to emitter voltage VBE (V)
Collector to emitter voltage VCE (V)
Collector current IC (mA)
0.4
30
Collector current IC (mA)
VCE=10V
Forward current transfer ratio hFE
0
100
500
Ta=75˚C
400
25˚C
300
–25˚C
200
100
0
0.1
0.3
1
3
10
30
100
Collector current IC (mA)
3
Composite Transistors
XP04601
fT — IE
NV — IC
240
1200
60
Ta=25˚C
IB=160µA
200
40
120µA
100µA
30
80µA
20
60µA
40µA
Base current IB (µA)
140µA
Collector current IC (mA)
1000
50
Collector current IC (mA)
VCE=10V
VCE=10V
Ta=25˚C
800
600
400
160
Ta=75˚C
–25˚C
80
40
200
10
25˚C
120
20µA
0
0
0
0
2
4
6
8
0
10
0.2
0.4
0.6
0.8
0
1.0
0.4
0.8
1.2
1.6
2.0
Base to emitter voltage VBE (V)
Base to emitter voltage VBE (V)
Collector to emitter voltage VCE (V)
Characteristics charts of Tr2
IC — VCE
IC — I B
–60
–400
–60
Ta=25˚C
–40
–200µA
–150µA
–20
–100µA
–10
Base current IB (µA)
–250µA
–30
–40
–30
–20
–250
–200
–150
0
0
–2 –4 –6 –8 –10 –12 –14 –16 –18
0
Collector to emitter voltage VCE (V)
–100
–200
–300
25˚C
–25˚C
–160
–120
–80
–40
–3
Ta=75˚C
25˚C
–0.3
–25˚C
–0.1
–0.03
–0.01
–0.003
0
–0.4
–0.8
–1.2
–1.6
–2.0
Base to emitter voltage VBE (V)
–0.001
–1
–3
–10
–30
–1.2
–1.6
hFE — IC
IC/IB=10
–1
–0.8
600
–100 –300 –1000
Collector current IC (mA)
VCE= –10V
Forward current transfer ratio hFE
VCE= – 5V
Collector to emitter saturation voltage VCE(sat) (V)
–240
0
–0.4
Base to emitter voltage VBE (V)
VCE(sat) — IC
–10
Ta=75˚C
0
–400
Base current IB (µA)
IC — VBE
–200
–100
–50
0
4
–300
–10
–50µA
0
VCE=–5V
Ta=25˚C
–350
–50
Collector current IC (mA)
Collector current IC (mA)
VCE=–5V
Ta=25˚C
IB= –300µA
–50
Collector current IC (mA)
IB — VBE
500
400
Ta=75˚C
300
25˚C
–25˚C
200
100
0
–1
–3
–10
–30
–100 –300 –1000
Collector current IC (mA)
Composite Transistors
XP04601
fT — IE
Cob — VCB
140
120
100
80
60
40
20
0
0.1
0.3
1
3
10
30
f=1MHz
IE=0
Ta=25˚C
7
6
5
4
3
2
2
–2 –3 –5
–10
–20 –30 –50
0
0.01 0.03
–100
h Parameter — IE
VCB=–5V
Rg=50kΩ
Ta=25˚C
0.3
1
3
10
h Parameter — VCE
300
300
200
200
IE=2mA
f=270Hz
Ta=25˚C
hfe
hfe
16
0.1
Emitter current IE (mA)
Collector to base voltage VCB (V)
NF — IE
100
100
14
f=100Hz
10
1kHz
8
hoe (µS)
30
20
10
50
30
20
hoe (µS)
10
10kHz
6
5
4
5
hie (kΩ)
3
3
VCE=–5V
f=270Hz
Ta=25˚C
2
2
0
0.1
50
Parameter h
12
Parameter h
Noise figure NF (dB)
3
1
Emitter current IE (mA)
18
4
1
0
–1
100
VCB=–5V
f=1kHz
Rg=2kΩ
Ta=25˚C
5
Noise figure NF (dB)
Collector output capacitance Cob (pF)
VCB=–10V
Ta=25˚C
Transition frequency fT (MHz)
6
8
160
20
NF — IE
0.2 0.3 0.5
1
2
3
5
Emitter current IE (mA)
10
1
0.1
hre (×10–4)
0.2 0.3 0.5
1
2
3
5
Emitter current IE (mA)
10
hre (×10–4)
hie (kΩ)
2
1
0.1
0.2 0.3 0.5
1
2
3
5
10
Collector to emitter voltage VCE (V)
5
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR