New Product SiZ730DT Vishay Siliconix N-Channel 30 V (D-S) MOSFETs FEATURES PRODUCT SUMMARY VDS (V) Channel-1 30 Channel-2 30 RDS(on) () ID (A) 0.0093 at VGS = 10 V 16a 0.0130 at VGS = 4.5 V 16a 0.0039 at VGS = 10 V 35a 0.0053 at VGS = 4.5 V 35a Qg (Typ.) 7.7 nC 21.2 nC G1 1 D1 2 D1 S1/D2 Pin 7 G2 S2 6 S2 5 APPLICATIONS • System Power - Notebook - Server • POL • Synchronous Buck Converter PowerPAIR® 6 x 3.7 Pin 1 • Halogen-free According to IEC 61249-2-21 Definition • TrenchFET® Power MOSFETs • 100 % Rg and UIS Tested • Compliant to RoHS Directive 2002/95/EC 3.73 mm D1 D1 G1 3 N-Channel 1 MOSFET S1/D2 6 mm G2 4 N-Channel 2 MOSFET Ordering Information: SiZ730DT-T1-GE3 (Lead (Pb)-free and Halogen-free) S2 ABSOLUTE MAXIMUM RATINGS (TA = 25 °C, unless otherwise noted) Parameter Symbol VDS VGS Drain-Source Voltage Gate-Source Voltage Continuous Drain Current (TJ = 150 °C) TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C ID Continuous Source Drain Diode Current TC = 25 °C TA = 25 °C IS Single Pulse Avalanche Current Single Pulse Avalanche Energy L = 0.1 mH IAS EAS Maximum Power Dissipation TC = 25 °C TC = 70 °C TA = 25 °C TA = 70 °C PD Unit V a 16 16a 35 35a 12.9b, c 10.3b, c 70 16a 26.4b, c 21.1b, c 100 3.2 16 13 27 17 35a 3.8b, c 30 45 48 31 3.9b, c 2.5b, c 4.6b, c 3b, c b, c TJ, Tstg Operating Junction and Storage Temperature Range Soldering Recommendations (Peak Temperature)d, e Channel-2 30 ± 20 a IDM Pulsed Drain Current (t = 300 µs) Channel-1 A mJ W - 55 to 150 260 °C THERMAL RESISTANCE RATINGS Channel-1 Parameter b, f t 10 s Symbol RthJA RthJC Channel-2 Typ. Max. Typ. Max. 24 3.5 32 4.6 20 2 27 2.6 Unit Maximum Junction-to-Ambient °C/W Maximum Junction-to-Case (Drain) Steady State Notes: a. Package limited. b. Surface mounted on 1" x 1" FR4 board. c. t = 10 s. d. See solder profile (www.vishay.com/doc?73257). The PowerPAIR is a leadless package. The end of the lead terminal is exposed copper (not plated) as a result of the singulation process in manufacturing. A solder fillet at the exposed copper tip cannot be guaranteed and is not required to ensure adequate bottom side solder interconnection. e. Rework conditions: manual soldering with a soldering iron is not recommended for leadless components. f. Maximum under steady state conditions is 67 °C/W for channel-1 and 65 °C/W for channel-2. Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 www.vishay.com 1 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) Parameter Symbol Test Conditions Min. Typ. Max. Unit Static Drain-Source Breakdown Voltage VDS Temperature Coefficient VGS(th) Temperature Coefficient Gate Threshold Voltage Gate Source Leakage Zero Gate Voltage Drain Current On-State Drain Currentb Drain-Source On-State Resistanceb Forward Transconductanceb VDS VDS/TJ VGS(th)/TJ VGS(th) IGSS IDSS ID(on) RDS(on) gfs VGS = 0 V, ID = 250 µA Ch-1 30 VGS = 0 V, ID = 250 µA Ch-2 30 ID = 250 µA Ch-1 ID = 250 µA Ch-2 32 ID = 250 µA Ch-1 -5 V 34 mV/°C ID = 250 µA Ch-2 VDS = VGS, ID = 250 µA Ch-1 1 2.2 VDS = VGS, ID = 250 µA Ch-2 1 2.2 VDS = 0 V, VGS = ± 20 V -5 Ch-1 ± 100 Ch-2 ± 100 VDS = 30 V, VGS = 0 V Ch-1 1 VDS = 30 V, VGS = 0 V Ch-2 1 VDS = 30 V, VGS = 0 V, TJ = 55 °C Ch-1 5 VDS = 30 V, VGS = 0 V, TJ = 55 °C Ch-2 VDS 5 V, VGS = 10 V Ch-1 15 VDS 5 V, VGS = 10 V Ch-2 20 VGS = 10 V, ID = 15 A Ch-1 0.0075 0.0093 VGS = 10 V, ID = 20 A Ch-2 0.0032 0.0039 VGS = 4.5 V, ID = 13 A Ch-1 0.0105 0.0130 VGS = 4.5 V, ID = 20 A Ch-2 0.0043 0.0053 VDS = 15 V, ID = 15 A Ch-1 48 VDS = 15 V, ID = 20 A Ch-2 80 V nA µA 5 A S Dynamica Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Total Gate Charge Gate-Source Charge Gate-Drain Charge Gate Resistance Crss Qg Channel-1 VDS = 15 V, VGS = 0 V, f = 1 MHz Channel-2 VDS = 10 V, VGS = 0 V, f = 1 MHz Rg 830 Ch-2 2370 Ch-1 185 Ch-2 475 pF Ch-1 80 Ch-2 220 VDS = 15 V, VGS = 10 V, ID = 15 A Ch-1 15.6 24 VDS = 15 V, VGS = 10 V, ID = 20 A Ch-2 43 65 Ch-1 7.7 12 Channel-1 VDS = 15 V, VGS = 4.5 V, ID = 15 A Ch-2 21.2 32 Ch-1 2.6 Channel-2 VDS = 15 V, VGS = 4.5 V, ID = 20 A Ch-2 7 Ch-1 3 Qgs Qgd Ch-1 Ch-2 f = 1 MHz nC 7.4 Ch-1 0.2 1 2 Ch-2 0.2 0.8 1.6 Notes: a. Guaranteed by design, not subject to production testing. b. Pulse test; pulse width 300 µs, duty cycle 2 %. www.vishay.com 2 Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix SPECIFICATIONS (TJ = 25 °C, unless otherwise noted) Parameter Symbol Test Conditions Min. Typ. Max. Ch-1 10 20 Ch-2 20 40 Ch-1 15 30 Ch-2 18 35 Ch-1 15 30 Ch-2 30 60 Ch-1 7 15 Unit Dynamica Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time td(on) tr td(off) tf td(on) tr Channel-1 VDD = 15 V, RL = 1.5 ID 10 A, VGEN = 4.5 V, Rg = 1 Channel-2 VDD = 15 V, RL = 1.5 ID 10 A, VGEN = 4.5 V, Rg = 1 Channel-1 VDD = 15 V, RL = 1.5 ID 10 A, VGEN = 10 V, Rg = 1 tf Channel-2 VDD = 15 V, RL = 1.5 ID 10 A, VGEN = 10 V, Rg = 1 IS TC = 25 °C td(off) Ch-2 10 20 Ch-1 5 10 Ch-2 10 20 Ch-1 15 30 Ch-2 15 30 Ch-1 17 35 Ch-2 30 60 Ch-1 7 15 Ch-2 10 20 ns Drain-Source Body Diode Characteristics Continuous Source-Drain Diode Current Pulse Diode Forward Currenta Body Diode Voltage Body Diode Reverse Recovery Time ISM VSD Ch-1 16 Ch-2 35 Ch-1 70 Ch-2 100 IS = 10 A, VGS = 0 V Ch-1 0.8 1.2 IS = 10 A, VGS = 0 V Ch-2 0.78 1.2 Ch-1 15 30 Ch-2 25 50 Ch-1 6 12 Ch-2 15 32 trr Body Diode Reverse Recovery Charge Qrr Channel-1 IF = 10 A, dI/dt = 100 A/µs, TJ = 25 °C Reverse Recovery Fall Time ta Channel-2 IF = 10 A, dI/dt = 100 A/µs, TJ = 25 °C Reverse Recovery Rise Time tb A Ch-1 9 Ch-2 13 Ch-1 6 Ch-2 12 V ns nC ns Notes: a. Guaranteed by design, not subject to production testing. b. Pulse test; pulse width 300 µs, duty cycle 2 %. Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 www.vishay.com 3 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix CHANNEL-1 TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 70 20 VGS = 10 V thru 4 V 60 50 ID - Drain Current (A) ID - Drain Current (A) 16 40 30 VGS = 3 V 20 12 TC = 25 °C 8 TC = 125 °C 4 10 0 0.0 0.5 1.0 1.5 2.0 0.0 0.5 1.0 1.5 2.0 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 0.014 2.5 3.0 25 30 1200 1000 C - Capacitance (pF) 0.012 RDS(on) - On-Resistance (Ω) TC = - 55 °C 0 VGS = 4.5 V 0.010 VGS = 10 V 0.008 0.006 Ciss 800 600 400 Coss 200 Crss 0.004 0 0 10 20 30 40 50 60 0 70 5 10 20 VDS - Drain-to-Source Voltage (V) ID - Drain Current (A) Capacitance On-Resistance vs. Drain Current 10 1.8 ID = 15.2 A 1.6 6 VDS = 15 V VDS = 24 V 4 VGS = 10 V ID = 15 A VDS = 7.5 V 8 RDS(on) - On-Resistance (Normalized) VGS - Gate-to-Source Voltage (V) 15 VGS = 4.5 V 1.4 1.2 1.0 2 0.8 0 0 3 6 9 12 Qg - Total Gate Charge (nC) Gate Charge www.vishay.com 4 15 18 0.6 - 50 - 25 0 25 50 75 100 125 150 TJ - Junction Temperature (°C) On-Resistance vs. Junction Temperature Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix CHANNEL-1 TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 0.030 100 ID = 15 A 0.025 RDS(on) - On-Resistance (Ω) IS - Source Current (A) TJ = 150 °C 10 TJ = 25 °C 1 0.020 0.015 TJ = 125 °C 0.010 TJ = 25 °C 0.005 0.1 0.0 0.000 0.2 0.4 0.6 0.8 1.0 1.2 0 2 4 6 8 10 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source Voltage 50 2.0 1.8 40 Power (W) VGS(th) (V) 1.6 1.4 ID = 250 μA 1.2 20 10 1.0 0.8 - 50 30 - 25 0 25 50 75 100 125 0 0.001 150 0.01 0.1 1 10 TJ - Temperature (°C) Time (s) Threshold Voltage Single Pulse Power 100 1000 1000 ID - Drain Current (A) 100 Limited by RDS(on)* 10 100 μs 1 ms 1 0.1 10 ms 100 ms 1s 10 s DC TA = 25 °C Single Pulse BVDSS Limited 0.01 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 www.vishay.com 5 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix CHANNEL-1 TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 50 30 25 20 30 Power (W) ID - Drain Current (A) 40 20 15 10 Package Limited 10 5 0 0 0 25 50 75 100 125 150 25 50 75 100 125 TC - Case Temperature (°C) TC - Case Temperature (°C) Current Derating* Power, Junction-to-Case 150 * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. www.vishay.com 6 Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix CHANNEL-1 TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.2 Notes: 0.1 PDM 0.1 0.05 t1 t2 1. Duty Cycle, D = t1 t2 2. Per Unit Base = RthJA = 67 °C/W 0.02 3. TJM - TA = PDMZthJA(t) Single Pulse 0.01 0.0001 0.001 4. Surface Mounted 0.01 0.1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.05 0.02 Single Pulse 0.1 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 www.vishay.com 7 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix CHANNEL-2 TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 20 100 VGS = 10 V thru 4 V 16 ID - Drain Current (A) ID - Drain Current (A) 80 VGS = 3 V 60 40 TC = 25 °C 12 8 TC = 125 °C 20 4 0 0 TC = - 55 °C 0.0 0.5 1.0 1.5 0.0 2.0 1.0 1.5 2.0 VDS - Drain-to-Source Voltage (V) VGS - Gate-to-Source Voltage (V) Output Characteristics Transfer Characteristics 2.5 3.0 25 30 3500 0.0050 3000 0.0045 VGS = 4.5 V C - Capacitance (pF) RDS(on) - On-Resistance (Ω) 0.5 0.0040 0.0035 VGS = 10 V 0.0030 Ciss 2500 2000 1500 1000 Coss 0.0025 500 Crss 0 0.0020 0 20 40 60 80 0 100 10 15 20 ID - Drain Current (A) VDS - Drain-to-Source Voltage (V) On-Resistance vs. Drain Current Capacitance 1.8 10 ID = 20 A VDS = 7.5 V ID = 20 A 1.6 8 RDS(on) - On-Resistance (Normalized) VGS - Gate-to-Source Voltage (V) 5 6 VDS = 15 V VDS = 24 V 4 2 VGS = 10 V 1.4 VGS = 4.5 V 1.2 1.0 0.8 0 0 10 20 30 Qg - Total Gate Charge (nC) Gate Charge www.vishay.com 8 40 50 0.6 - 50 - 25 0 25 50 75 100 125 150 TJ - Junction Temperature (°C) On-Resistance vs. Junction Temperature Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix CHANNEL-2 TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) 0.010 100 ID = 20 A RDS(on) - On-Resistance (Ω) IS - Source Current (A) TJ = 150 °C 10 TJ = 25 °C 1 0.008 0.006 TJ = 125 °C 0.004 TJ = 25 °C 0.002 0.1 0.0 0.000 0.2 0.4 0.6 0.8 1.0 0 1.2 2 4 6 8 VSD - Source-to-Drain Voltage (V) VGS - Gate-to-Source Voltage (V) Source-Drain Diode Forward Voltage On-Resistance vs. Gate-to-Source 1.8 10 50 1.6 40 Power (W) VGS(th) (V) 1.4 1.2 ID = 250 μA 1.0 20 10 0.8 0.6 - 50 30 - 25 0 25 50 75 100 125 0 0.01 150 0.1 TJ - Temperature (°C) 1 10 100 1000 Time (s) Single Pulse Power Threshold Voltage 1000 ID - Drain Current (A) 100 Limited by RDS(on)* 100 μs 10 1 ms 10 ms 1 100 ms 0.1 1s 10 s DC TA = 25 °C Single Pulse BVDSS Limited 0.01 0.01 0.1 1 10 100 VDS - Drain-to-Source Voltage (V) * VGS > minimum VGS at which RDS(on) is specified Safe Operating Area, Junction-to-Ambient Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 www.vishay.com 9 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix 100 50 80 40 60 30 Power (W) ID - Drain Current (A) CHANNEL-2 TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Package Limited 40 20 10 20 0 0 0 25 50 75 100 125 150 25 50 75 100 125 TC - Case Temperature (°C) TC - Case Temperature (°C) Current Derating* Power, Junction-to-Case 150 * The power dissipation PD is based on TJ(max) = 150 °C, using junction-to-case thermal resistance, and is more useful in settling the upper dissipation limit for cases where additional heatsinking is used. It is used to determine the current rating, when this rating falls below the package limit. www.vishay.com 10 Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 New Product SiZ730DT Vishay Siliconix CHANNEL-2 TYPICAL CHARACTERISTICS (25 °C, unless otherwise noted) Normalized Effective Transient Thermal Impedance 1 Duty Cycle = 0.5 0.1 0.2 Notes: 0.1 PDM 0.05 t1 t2 1. Duty Cycle, D = 0.02 t1 t2 2. Per Unit Base = RthJA = 65 °C/W 3. TJM - TA = PDMZthJA(t) Single Pulse 0.01 0.0001 4. Surface Mounted 0.001 0.01 0.1 1 10 100 1000 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Ambient 1 Normalized Effective Transient Thermal Impedance Duty Cycle = 0.5 0.2 0.1 0.05 0.02 Single Pulse 0.1 0.0001 0.001 0.01 0.1 Square Wave Pulse Duration (s) Normalized Thermal Transient Impedance, Junction-to-Case Vishay Siliconix maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for Silicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see www.vishay.com/ppg?67648. Document Number: 67648 S11-2380-Rev. B, 28-Nov-11 www.vishay.com 11 This document is subject to change without notice. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Package Information Vishay Siliconix PowerPAIRTM 6 x 3.7 CASE OUTLINE A D 0.10 C 2X Pin 5 K2 K2 Pin 4 Pin 4 Pin 5 Pin 6 K L Pin 6 E E1 D1 K1 Pin #1 Ident (Optional) Pin 1 Pin 2 0.10 C Pin 3 Pin 2 Pin 3 2X E2 D1 Pin 1 e b BACK SIDE VIEW b1 C A1 C A 0.08 c 0.10 C Z Z MILLIMETERS INCHES DIM. MIN. NOM. MAX. MIN. NOM. MAX. A 0.70 0.75 0.80 0.028 0.030 0.032 A1 0.00 - 0.05 0.000 - 0.002 b 0.46 0.51 0.56 0.018 0.020 0.022 b1 0.20 0.25 0.38 0.008 0.010 0.015 C 0.18 0.20 0.23 0.007 0.008 0.009 D 3.65 3.73 3.81 0.144 0.147 0.150 D1 2.41 2.53 2.65 0.095 0.100 0.104 E 5.92 6.00 6.08 0.233 0.236 0.239 E1 2.62 2.67 2.72 0.103 0.105 0.107 E2 0.87 0.92 0.97 0.034 0.036 0.038 e 1.27 BSC 0.05 BSC K 0.45 TYP. 0.018 TYP. K1 0.66 TYP. 0.026 TYP. K2 L 0.60 TYP. 0.38 0.43 0.024 TYP. 0.48 0.015 0.017 0.019 ECN: S-82772-Rev. B, 17-Nov-08 DWG: 5979 Document Number: 69028 17-Nov-08 www.vishay.com 1 PAD Pattern Vishay Siliconix RECOMMENDED PAD FOR PowerPAIR™ 6 x 3.7 0.3520 (8.941) 0.0220 (0.559) 0.0190 (0.483) 0, 0.11 0.0170 (0.432) 0, 0.03 0.1070 (2.718) 0.1040 (2.642) 0.4390 (11.151) 0, 0 0.0220 (0.559) 0, - 0.0645 0.0170 (0.432) 0.0380 (0.965) - 0.05, - 0.11 0, - 0.11 1 0.0500 (1.27) Recommended PAD for PowerPAIR 6 x 3.7 Dimensions in inches (mm) Keep-out 0.3520 (8.94) x 0.4390 (11.151) Document Number: 65278 Revision: 04-Aug-09 www.vishay.com 1 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000