Baumer electric Actuator-Sensor-Interface AS-Interface module ASIA 36A0411 Art.-Code: 136152 59,6 • Specification 2.11 / Mini-Module 52 • Standard addressing mode as S-slave; up to 31 modules 27,2 14 LED's 36 2 3 4 • Spring loaded terminals (cage clamp) • Fault diagnosis LED‘s bus data voltage supply range supply current reverse polarity protection E/A configuration ID-Code / ID-2-Code AS-i voltage indicator / error indicator outputs switching element / polarity total current for actuators -25...+40 °C total current for actuators +40...+70 °C switching current per output lmax short-circuit protection with feedback watchdog for bus monitoring output indicators general protection class temperature range / storage temperature housing material mounting EMC certificate no. ø 5,2 1 4,4 • Power supply for actuators via bus 7,6 • Connection for four actuators max. 50 18 - + • Profile S - 8.0.F 2,2 ø 2,8 to 5,0 13,6 ø 13 20,5 connection diagram 26,5 - 33,1 VDC ≤ 230 mA yes 8 HEX 0 HEX / F HEX green LED / red LED AS-i + AS-i AS-i - transistor / sourcing (PNP) ≤ 170 mA ≤ 130 mA 100 mA yes yes yellow LED IP 65 (with EPDM cable) -25...+70 °C / -25...+85 °C PBT / PC (UL 94 V-0) screws (2 x M4) refer to the AS-i brochure 60002 0+ 0+ 1 0+ 0+ 2 D0 D1 D2 D3 0+ 0+ 0+ 0+ 3 4 general port assignment: D0, D1, D2, D3 output possible conductor cross-sections: actuator terminals: 0,08...0,5 mm2 max. outer cable diameter: ø 2,8...5 mm diagnosis ASI Error (green) (red) Status Description POWER OFF Adresse = 0 No data exchange No ASi power Adresse = 0 Watchdog activated, Adresse = 0 ok -Actuator supply overload -Actuator supply shorted ok Error actuators LED dark Baumer Electric AG Hummelstrasse 17 Postfach CH-8501 Frauenfeld Drawn: 03.12.03/rue Checked: 05.12.03/phw LED light LED flashing Technical specifications subject to change Tel. +41 52 728 11 22 Fax +41 52 728 11 44 Released: 23.08.04/phw Last change: 15.11.04/phw Baumer electric Actuator-Sensor-Interface AS-Interface module ASIA 36A1321 Art.-Code: 148592 59,6 • Specification 2.11 / Mini-Module 52 • Extended addressing mode as A/B-slave; up to 62 modules 27,2 14 LED's • Spring loaded terminals (cage clamp) 18 36 3 4 ø 5,2 2 4,4 1 7,6 • Power supply for sensor and actuators via bus max. 50 • Connection for one 3-wire sensor and three actuators - + • Profile S - 9.A.E 2,2 ø 2,8 to 5,0 13,6 ø 13 20,5 • Fault diagnosis LED‘s bus data voltage supply range supply current reverse polarity protection E/A configuration ID-Code / ID-2 code AS-i voltage indicator / error indicator input supply voltage for sensor short-circuit protection with feedback total current for sensor -25...+70 °C polarity of the input input current high / low input voltage high / low input indicator outputs switching element / polarity total current for actuators -25...+70 °C switching current per output Imax short-circuit protection with feedback watchdog for bus monitoring output indicator general protection class temperature range / storage temperature housing material mounting EMC certificate no. connection diagram 26,5 - 33,1 VDC ≤ 190 mA yes 9 HEX A HEX / E HEX green LED / red LED 18 - 30 VDC yes ≤ 125 mA minus total current actuators PNP ≥ 1,5 mA / ≤ 0,5 mA > 10 VDC / < 5 VDC yellow LED transistor / sourcing (PNP) ≤ 125 mA minus total current sensor 100 mA yes yes yellow LED IP 65 (with EPDM cable) -25...+70 °C / -25...+85 °C PBT / PC (UL 94 V-0) screws (2 x M4) refer to the AS-i brochure 60001 AS-i + - AS-i AS-i D0 . . . D3 0+ 0+ + IN 1 2 3 4 general port assignment: D0, D1, D2 output D3 input possible conductor cross-sections: sensor terminals: 0,08...0,5 mm2 actuator terminals: 0,08...0,5 mm2 max. outer cable diameter: ø 2,8...5 mm diagnosis ASI Error (green) (red) Status Description POWER OFF Address = 0 No data exchange No ASi power Address = 0 Watchdog activated, Address = 0 ok -Sensor supply overload -Sensor supply shorted -Actuator supply overload -Actuator supply shorted ok External RESET, overload Error actuators LED dark Baumer Electric AG Hummelstrasse 17 Postfach CH-8501 Frauenfeld Drawn: 03.12.03/rue Checked: 12.03.04/phw 0+ 0+ 0+ 0+ LED light LED flashing Technical specifications subject to change Tel. +41 52 728 11 22 Fax +41 52 728 11 44 Released: 23.08.04/phw Last change: 20.12.04/phw