Baumer electric Actuator-Sensor-Interface AS-Interface module ASIA 36A3021 Art.-Code: 148114 59,6 • Specification 2.11 / Mini-Module 52 • Extended addressing mode as A/B-Slave; up to 62 modules 27,2 14 LED's 18 36 3 4 ø 5,2 2 4,4 1 • Bus interconnection for round cable with cage clamp and standard AS-i flat cable possible 7,6 • Power supply for sensors via bus max. 50 • Connection for three 3-wire sensors - + • Profile S - 0.A.E 2,2 ø 2,8 to 5,0 13,6 ø 13 20,5 • Fault diagnosis LED‘s bus data voltage supply range supply current reverse polarity protection E/A configuration ID-Code / ID-2 AS-i voltage indicator / error indicator inputs supply voltage for sensors short-circuit protection with feedback total current for sensors -25...+70 °C polarity of the inputs input current high / low input voltage high / low input indicator general protection class temperature range / storage temperature housing material mounting EMC certificate nr. connection diagram 26,5 - 33,1 VDC ≤ 170 mA yes 0 HEX A HEX / E HEX green LED / red LED AS-i + 1 AS-i - AS-i + 18 - 30 VDC yes ≤ 125 mA PNP ≥ 1,5 mA / ≤ 0,5 mA > 10 VDC / < 5 VDC yellow LED IP 65 (with EPDM cable) -25...+70 °C / -25...+85 °C PBT / PC (UL 94 V-0) screws (2 x M4) refer to the AS-i brochure 59902 AS-i AS-i - D1 . . D3 + IN 2 + IN 3 + IN 4 general port assignment: D1, D2, D3 D0 input n.c. possible conductor cross-sections: sensor terminals: 0,08...0,5 mm2 max. outer cable diameter: ø 2,8...5 mm diagnosis ASI Error (green) (red) Status Description POWER OFF Address = 0 No data exchange No ASi power Address = 0 Watchdog activated, Address = 0 ok -Sensor supply overload -Sensor supply shorted ok External RESET, overload LED dark Baumer Electric AG Hummelstrasse 17 Postfach CH-8501 Frauenfeld Drawn: 03.12.03/rue Checked: 20.08.04/phw LED light LED flashing Technical specifications subject to change Tel. +41 52 728 11 22 Fax +41 52 728 11 44 Released: 20.08.04/phw Last change: 04.11.04/phw