data sheet - family

Baumer electric
Actuator-Sensor-Interface
AS-Interface module
ASIA 36A2211
Art.-Code: 131709
59,6
• Specification 2.11 / Mini-Module
52
• Standard addressing mode as
S-slave; up to 31 modules
27,2
14
LED's
• Spring loaded terminals (cage
clamp)
18
36
3
4
ø 5,2
2
4,4
1
7,6
• Power supply for sensors and
actuators via bus
max. 50
• Connection for two 3-wire sensors
and two actuators
- +
• Profile S - 3.F.F
2,2
ø 2,8 to 5,0
13,6
ø 13
20,5
• Fault diagnosis LED‘s
bus data
voltage supply range
supply current
reverse polarity protection
E/A configuration
ID-Code / ID-2 code
AS-i voltage indicator / error indicator
inputs
supply voltage for sensors
short-circuit protection with feedback
total current for sensors -25...+40 °C
total current for sensors +40...+70 °C
polarity of the inputs
input current high / low
input voltage high / low
input indicator
outputs
switching element / polarity
total current for actuators -25...+40 °C
total current for actuators +40...+70 °C
switching current per output lmax
short-circuit protection with feedback
watchdog for bus monitoring
output indicator
general
protection class
temperature range / storage temperature
housing material
mounting
EMC
certificate no.
connection diagram
26,5 - 33,1 VDC
≤ 200 mA
yes
3 HEX
F HEX / F HEX
green LED / red LED
AS-i +
AS-i
AS-i -
18 - 30 VDC
yes
≤ 170 mA minus total current actuators
≤ 130 mA minus total current actuators
PNP
≥ 1,5 mA / ≤ 0,5 mA
> 10 VDC / < 5 VDC
yellow LED
transistor / sourcing (PNP)
≤ 170 mA minus total current sensors
≤ 130 mA minus total current sensors
100 mA
yes
yes
yellow LED
+
IN
1
+
IN
2
IN
D0
D1
D2
D3
0+
0+
0+
0+
3
OUT
4
general
port assignment:
D0, D1
input
D2, D3
output
possible conductor cross-sections:
sensor terminals:
0,08...0,5 mm2
actuator terminals:
0,08...0,5 mm2
max. outer cable diameter: ø 2,8...5 mm
diagnosis
IP 65 (with EPDM cable)
-25...+70 °C / -25...+85 °C
PBT / PC (UL 94 V-0)
screws (2 x M4)
refer to the AS-i brochure
60202
ASI
Error
(green) (red)
Status
Description
POWER OFF
Address = 0
No data exchange
No ASi power
Address = 0
Watchdog activated,
Address = 0
ok
-Sensor supply overload
-Sensor supply shorted
-Actuator supply overload
-Actuator supply shorted
ok
External RESET,
overload
Error actuators
LED dark
Baumer Electric AG Hummelstrasse 17 Postfach CH-8501 Frauenfeld
Drawn: 03.12.03/rue
Checked: 05.12.03/phw
LED light
LED flashing
Technical specifications subject to change
Tel. +41 52 728 11 22 Fax +41 52 728 11 44
Released: 23.08.04/phw
Last change: 29.11.04/phw
Baumer electric
Actuator-Sensor-Interface
AS-Interface module
ASIA 36A2221
Art.-Code: 148300
59,6
• Specification 2.11 / Mini-Module
52
• Extended addressing mode as
A/B-slave; up to 62 modules
27,2
14
LED's
• Spring loaded terminals (cage
clamp)
18
36
3
4
ø 5,2
2
4,4
1
7,6
• Power supply for sensors and
actuators via bus
max. 50
• Connection for two 3-wire sensors
and two actuators
- +
• Profile S - B.A.E
2,2
ø 2,8 to 5,0
13,6
ø 13
20,5
• Fault diagnosis LED‘s
bus data
voltage supply range
supply current
reverse polarity protection
E/A configuration
ID-Code / ID-2 code
AS-i voltage indicator / error indicator
inputs
supply voltage for sensors
short-circuit protection with feedback
total current for sensors -25...+70 °C
polarity of the inputs
input current high / low
input voltage high / low
input indicator
outputs
switching element / polarity
total current for actuators -25...+70 °C
switching current per output Imax
short-circuit protection with feedback
watchdog for bus monitoring
output indicator
general
protection class
temperature range / storage temperature
housing material
mounting
EMC
certificate no.
connection diagram
26,5 - 33,1 VDC
≤ 170 mA
yes
B HEX
A HEX / E HEX
green LED / red LED
AS-i +
AS-i
AS-i -
18 - 30 VDC
yes
≤ 125 mA minus total current actuators
PNP
≥ 1,5 mA / ≤ 0,5 mA
> 10 VDC / < 5 VDC
yellow LED
transistor / sourcing (PNP)
≤ 125 mA minus total current sensors
100 mA
yes
yes
yellow LED
IP 65 (with EPDM cable)
-25...+70 °C / -25...+85 °C
PBT / PC (UL 94 V-0)
screws (2 x M4)
refer to the AS-i brochure
60201
1
+
IN
2
IN
D0
D1
D2
D3
0+
0+
0+
0+
3
OUT
4
general
port assignment:
D0, D1
output
D2, D3
input
possible conductor cross-sections:
sensor terminals:
0,08...0,5 mm2
actuator terminals:
0,08...0,5 mm2
max. outer cable diameter: ø 2,8...5 mm
diagnosis
ASI
Error
(green) (red)
Status
Description
POWER OFF
Address = 0
No data exchange
No ASi power
Address = 0
Watchdog activated,
Adresse = 0
ok
-Sensor supply overload
-Sensor supply shorted
-Actuator supply overload
-Actuator supply shorted
ok
External RESET,
overload
Error actuators
LED dark
Baumer Electric AG Hummelstrasse 17 Postfach CH-8501 Frauenfeld
Drawn: 03.12.03/rue
Checked: 20.08.04/phw
+
IN
LED light
LED flashing
Technical specifications subject to change
Tel. +41 52 728 11 22 Fax +41 52 728 11 44
Released: 23.08.04/phw
Last change: 16.11.04/phw