VEMT2500X01, VEMT2520X01 www.vishay.com Vishay Semiconductors Silicon NPN Phototransistor FEATURES • Package type: surface mount • Package form: GW, RGW VEMT2520X01 • Dimensions (L x W x H in mm): 2.3 x 2.3 x 2.8 VEMT2500X01 • AEC-Q101 qualified • High radiant sensitivity • Suitable for visible and near infrared radiation • Fast response times • Angle of half sensitivity: = ± 15° • Package matched with IR emitter series VSMB2000X01 16758-10 • Floor life: 4 weeks, MSL 2a, acc. J-STD-020 • Lead (Pb)-free reflow soldering DESCRIPTION • Compliant to RoHS Directive 2002/95/EC and in accordance to WEEE 2002/96/EC VEMT2500X01 series are silicon NPN epitaxial planar phototransistors in a miniature dome lens, clear epoxy package for surface mounting. The device is sensitive to visible and near infrared radiation. Note ** Please see document “Vishay Material Category Policy”: www.vishay.com/doc?99902 APPLICATIONS • Detector in automotive applications • Photo interrupters • Miniature switches • Counters • Encoders • Position sensors PRODUCT SUMMARY COMPONENT Ica (mA) (deg) 0.1 (nm) VEMT2500X01 6 ± 15 470 to 1090 VEMT2520X01 6 ± 15 470 to 1090 Note • Test condition see table “Basic Characteristics” ORDERING INFORMATION ORDERING CODE PACKAGING REMARKS PACKAGE FORM VEMT2500X01 Tape and reel MOQ: 6000 pcs, 6000 pcs/reel Reverse gullwing VEMT2520X01 Tape and reel MOQ: 6000 pcs, 6000 pcs/reel Gullwing Note • MOQ: minimum order quantity ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) SYMBOL VALUE Collector emitter voltage PARAMETER TEST CONDITION VCEO 20 V Emitter collector voltage VECO 7 V Collector current Power power dissipation Junction temperature Operating temperature range Rev. 1.2, 24-Aug-11 Tamb 75 °C UNIT IC 50 mA PV 100 mW Tj 100 °C Tamb - 40 to + 100 °C Document Number: 81134 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMT2500X01, VEMT2520X01 www.vishay.com Vishay Semiconductors ABSOLUTE MAXIMUM RATINGS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL VALUE Tstg - 40 to + 100 °C Acc. reflow profile fig. 8 Tsd 260 °C Acc. J-STD-051 RthJA 250 K/W Storage temperature range Soldering temperature Thermal resistance junction/ambient UNIT PV - Power Dissipation (mW) 120 100 80 60 RthJA = 250 K/W 40 20 0 0 10 21619 20 30 40 50 60 70 80 90 100 Tamb - Ambient Temperature (°C) Fig. 1 - Power Dissipation Limit vs. Ambient Temperature BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) PARAMETER TEST CONDITION SYMBOL MIN. IC = 0.1 mA VCEO 20 VCE = 5 V, E = 0 VCE = 0 V, f = 1 MHz, E = 0 Collector emitter breakdown voltage Collector dark current Collector emitter capacitance Collector light current Ee = 1 = 950 nm, VCE = 5 V mW/cm2, TYP. MAX. UNIT ICEO 1 100 nA CCEO 25 ICA 3 V 6 pF 9 mA Angle of half sensitivity ± 15 deg Wavelength of peak sensitivity p 850 nm Range of spectral bandwidth 0.1 470 to 1090 Collector emitter saturation voltage Temperature coefficient of Ica Rev. 1.2, 24-Aug-11 IC = 0.05 mA VCEsat Ee = 1 mW/cm2, = 950 nm, VCE = 5 V TkIca nm 0.4 1.1 V %/K Document Number: 81134 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMT2500X01, VEMT2520X01 www.vishay.com Vishay Semiconductors BASIC CHARACTERISTICS (Tamb = 25 °C, unless otherwise specified) 1.2 S (λ)rel - Relative Spectral Sensitivity IF = 0 1000 VCE = 70 V VCE = 25 V VCE = 5 V 100 10 1.0 0.8 0.6 0.4 0.2 1 0 0 10 20594 20 30 40 50 60 70 80 90 100 400 500 600 700 800 900 1000 1100 λ - Wavelength (nm) 21555 Tamb - Ambient Temperature (°C) Fig. 5 - Relative Spectral Sensitivity vs. Wavelength Fig. 2 - Collector Dark Current vs. Ambient Temperature 0° 10° 20° 30° Srel - Relative Sensitivity Ica - Collector Light Current (mA) 100 10 1 VCE = 5 V, λ = 950 nm 0.1 0.9 50° 0.8 60° 70° 0.7 80° 0.01 0.01 0.1 1 0.6 10 Ee - Irradiance (mW/cm²) 21573 Fig. 3 - Collector Light Current vs. Irradiance 0.4 0.2 0 94 8248 Fig. 6 - Relative Radiant Sensitivity vs. Angular Displacement 2.0 90 80 RL = 100 Ω 70 60 50 40 tf 30 tr 20 10 Ica rel - Relative Collector Current 100 tr/tf - Rise/Fall Time (µs) 40° 1.0 ϕ - Angular Displacement ICE0 - Collector Dark Current (nA) 10 000 1.8 VCE = 5 V Ee = 1 mW/cm2 λ = 950 nm 1.6 1.4 1.2 1.0 0.8 0.6 0 0 20599 250 IC - Collector Current (µA) Fig. 4 - Rise/Fall Time vs. Collector Current Rev. 1.2, 24-Aug-11 0 500 750 1000 1250 1500 1750 2000 94 8239 20 40 60 80 100 Tamb - Ambient Temperature (°C) Fig. 7 - Relative Collector Current vs. Ambient Temperature Document Number: 81134 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMT2500X01, VEMT2520X01 www.vishay.com Vishay Semiconductors REFLOW SOLDER PROFILE DRYPACK Devices are packed in moisture barrier bags (MBB) to prevent the products from moisture absorption during transportation and storage. Each bag contains a desiccant. 300 Temperature (°C) max. 260 °C 245 °C 255 °C 240 °C 217 °C 250 FLOOR LIFE 200 Floor life (time between soldering and removing from MBB) must not exceed the time indicated on MBB label: Floor life: 4 weeks Conditions: Tamb < 30 °C, RH < 60 % Moisture sensitivity level 2a, acc. to J-STD-020. max. 30 s 150 max. 100 s max. 120 s 100 max. ramp up 3 °C/s max. ramp down 6 °C/s 50 DRYING 0 0 50 100 19841 150 200 250 In case of moisture absorption devices should be baked before soldering. Conditions see J-STD-020 or label. Devices taped on reel dry using recommended conditions 192 h at 40 °C (+ 5 °C), RH < 5 %. 300 Time (s) Fig. 8 - Lead (Pb)-free Reflow Solder Profile acc. J-STD-020 PACKAGE DIMENSIONS VEMT2500X01 in millimeters Ø 1.8 ± 0.1 1.6 0.1 9 2.77 ± 0.2 0.05 0.3 ± 0.1 0.4 2.2 5.8 2.2 ± 0.2 Exposed copper ± 0.2 1.1 ± 0.1 Z 20:1 2.3 0.254 ± 0.2 0.4 0.5 2.3 Collector PIN ID 1.7 Emitter 0.75 Solder pad proposal acc. IPC 7351 Technical drawings according to DIN specifications Not indicated to Ø 2.3 lerances ±0.1 ± 0.1 6.7 Drawing-No.: 6.544-5391.01-4 Issue: 1; 26.09.08 21570 Rev. 1.2, 24-Aug-11 Document Number: 81134 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMT2500X01, VEMT2520X01 www.vishay.com Vishay Semiconductors PACKAGE DIMENSIONS VEMT2520X01 in millimeters Ø 1.8 0 .1 9 2.77 ± 0.2 0.05 1.6 0.3 0.4 2.2 2.2 4.2 ± 0.2 Exposed copper 0.6 0.75 Collector Pin ID Solder pad proposal acc. IPC 7351 0.254 2.3 ± 0.2 0.4 0.5 2.3 ± 0.2 Emitter Technical drawings according to DIN specifications Not indicated tolerances ± 0.1 2.45 5.15 Drawing-No.: 6.544-5383.01-4 Issue: 4; 28.01.09 21569 Rev. 1.2, 24-Aug-11 Document Number: 81134 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMT2500X01, VEMT2520X01 www.vishay.com Vishay Semiconductors TAPE AND REEL DIMENSIONS VEMT2500X01 in millimeters Unreel direction X 2. Ø 62 ± 0.5 Reel Ø 13 ± 0.5 Ø 330 ± 1 0.5 5± Tape position coming out from reel 6000 pcs/reel Label posted here Technical drawings according to DIN specifications 12.4 ± 1.5 Leader and trailer tape: Empty (160 mm min.) Parts mounted Direction of pulling out Devicce Lead I Lead II Collector Emitter Cathode Anode Anode Cathode Ø 1.55 ± 0.05 I VEMT2000 VEMT2500 X 2:1 4 ± 0.1 2 ± 0.05 VEMD2000 5.5 ± 0.05 VEMD2500 VSMB2000 VSMG2000 VSMY2850RG 3.05 ± 0.1 II 12 ± 0.3 Terminal position in tape 1.75 ± 0.1 Empty (400 mm min.) 4 ± 0.1 Drawing-No.: 9.800-5100.01-4 Issue: 2; 18.03.10 21572 Rev. 1.2, 24-Aug-11 Document Number: 81134 6 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VEMT2500X01, VEMT2520X01 www.vishay.com Vishay Semiconductors TAPE AND REEL DIMENSIONS VEMT2520X01 in millimeters Reel X Unreel direction 5± Ø 62 ± 0.5 2. Ø 13 ± 0.5 Ø 330 ± 1 0.5 Tape position coming out from reel 6000 pcs/reel Label posted here technical drawings according to DIN specifications 12.4 ± 1.5 Leader and trailer tape: Empty (160 mm min.) Parts mounted Direction of pulling out Ø 1.55 ± 0.05 Devicce Lead I Lead II Collector Emitter Cathode Anode Anode Cathode I VEMT2020 VEMT2520 X 2:1 4 ± 0.1 2 ± 0.05 VSMB2020 VEMD2020 VEMD2520 VSMY2850G 3.05 ± 0.1 II 4 ± 0.1 5.5 ± 0.05 VSMG2020 12 ± 0.3 Terminal position in tape 1.75 ± 0.1 Empty (400 mm min.) Drawing-No.: 9.800-5091.01-4 Issue: 3; 18.03.10 21571 Rev. 1.2, 24-Aug-11 Document Number: 81134 7 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000