IRFH5206PbF HEXFET® Power MOSFET VDS 60 V RDS(on) max 6.7 m 40 1.7 nC 89 A (@VGS = 10V) Qg (typical) RG (typical) ID (@Tc(Bottom) = 25°C) : : PQFN 5X6 mm Applications • • • • Secondary Side Synchronous Rectification Inverters for DC Motors DC-DC Brick Applications Boost Converters Features and Benefits Benefits Features Low RDSon (≤ 7.0mΩ at Vgs=10V) Low Thermal Resistance to PCB (≤ 1.2°C/W) 100% Rg tested Low Profile (≤ 0.9 mm) Lower Conduction Losses Enable better thermal dissipation Increased Reliability results in Increased Power Density ⇒ Multi-Vendor Compatibility Industry-Standard Pinout Easier Manufacturing Compatible with Existing Surface Mount Techniques Environmentally Friendlier RoHS Compliant Containing no Lead, no Bromide and no Halogen MSL1, Industrial Qualification Increased Reliability Orderable part number Package Type IRFH5206TRPBF IRFH5206TR2PBF Standard Pack Form Quantity PQFN 5mm x 6mm Tape and Reel 4000 PQFN 5mm x 6mm Tape and Reel 400 Note EOL notice # 259 Absolute Maximum Ratings VDS VGS ID @ TA = 25°C ID @ TA = 70°C ID @ TC(Bottom) = 25°C ID @ TC(Bottom) = 100°C IDM PD @TA = 25°C PD @ TC(Bottom) = 25°C Parameter Drain-to-Source Voltage Gate-to-Source Voltage Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Continuous Drain Current, VGS @ 10V Pulsed Drain Current Power Dissipation Power Dissipation TJ TSTG Linear Derating Factor (Bottom) Operating Junction and Storage Temperature Range g f c f Max. 60 ± 20 16 13 89 56 350 3.6 100 Units 0.83 -55 to + 150 W/°C V A W °C Notes through are on page 9 1 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback March 19, 2015 IRFH5206PbF Static @ TJ = 25°C (unless otherwise specified) BVDSS ΔΒVDSS/ΔTJ RDS(on) VGS(th) ΔVGS(th) IDSS IGSS Parameter Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Gate Threshold Voltage Coefficient Drain-to-Source Leakage Current Output Charge Min. 60 ––– ––– 2.0 ––– ––– ––– ––– ––– 73 ––– ––– ––– ––– ––– ––– ––– Typ. ––– 0.07 5.6 ––– -9.7 ––– ––– ––– ––– ––– 40 6.2 3.4 12 18.4 15.4 14 Max. Units Conditions ––– V VGS = 0V, ID = 250μA ––– V/°C Reference to 25°C, ID = 1mA 6.7 mΩ VGS = 10V, ID = 50A 4.0 V VDS = VGS, ID = 100μA ––– mV/°C 20 VDS = 60V, VGS = 0V μA 250 VDS = 60V, VGS = 0V, TJ = 125°C 100 VGS = 20V nA -100 VGS = -20V ––– S VDS = 25V, ID = 50A 60 ––– VDS = 30V ––– VGS = 10V nC ID = 50A ––– ––– See Fig.17 & 18 ––– ––– nC VDS = 16V, VGS = 0V Gate Resistance Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance ––– ––– ––– ––– ––– ––– ––– ––– 1.7 6.4 11 22 8.2 2490 360 160 ––– ––– ––– ––– ––– ––– ––– ––– Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Forward Transconductance Total Gate Charge Pre-Vth Gate-to-Source Charge Post-Vth Gate-to-Source Charge Gate-to-Drain Charge Gate Charge Overdrive Switch Charge (Qgs2 + Qgd) gfs Qg Qgs1 Qgs2 Qgd Qgodr Qsw Qoss RG td(on) tr td(off) tf Ciss Coss Crss e Ω ns pF VDD = 30V, VGS = 10V ID = 50A RG=1.8Ω See Fig.15 VGS = 0V VDS = 25V ƒ = 1.0MHz Avalanche Characteristics Parameter Single Pulse Avalanche Energy Avalanche Current EAS IAR c Typ. ––– ––– d Units mJ A Max. 87 50 Diode Characteristics IS Parameter Continuous Source Current ISM (Body Diode) Pulsed Source Current c (Body Diode) Diode Forward Voltage Reverse Recovery Time VSD trr Qrr ton Reverse Recovery Charge Forward Turn-On Time Min. Typ. ––– ––– Max. Units 89 ––– ––– 350 ––– ––– ––– 26 1.3 39 Conditions MOSFET symbol D A showing the integral reverse V ns p-n junction diode. TJ = 25°C, IS = 50A, VGS = 0V TJ = 25°C, IF = 50A, VDD = 30V di/dt = 500A/μs G S e ––– 110 165 nC Time is dominated by parasitic Inductance e Thermal Resistance RθJC (Bottom) RθJC (Top) RθJA RθJA (<10s) 2 f f Junction-to-Case Junction-to-Case Junction-to-Ambient Junction-to-Ambient Parameter g g www.irf.com © 2015 International Rectifier Typ. ––– ––– ––– ––– Submit Datasheet Feedback Max. 1.2 15 35 22 Units °C/W March 19, 2015 IRFH5206PbF 1000 1000 100 BOTTOM 10 3.8V 1 TOP ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) TOP VGS 10V 8.0V 6.0V 5.0V 4.5V 4.3V 4.0V 3.8V 100 BOTTOM 10 3.8V ≤60μs PULSE WIDTH ≤60μs PULSE WIDTH Tj = 150°C Tj = 25°C 0.1 1 0.1 1 10 100 0.1 VDS, Drain-to-Source Voltage (V) 100 2.0 RDS(on) , Drain-to-Source On Resistance (Normalized) ID, Drain-to-Source Current (A) 10 Fig 2. Typical Output Characteristics 1000 100 TJ = 150°C 10 TJ = 25°C 1 VDS = 25V ≤ 60μs PULSE WIDTH 0.1 2.0 3.0 4.0 5.0 6.0 7.0 8.0 ID = 50A VGS = 10V 1.5 1.0 0.5 9.0 -60 -40 -20 VGS, Gate-to-Source Voltage (V) 10000 40 60 80 100 120 140 160 14.0 VGS, Gate-to-Source Voltage (V) ID= 50A Coss = Cds + Cgd Ciss 1000 Coss Crss 100 10 20 Fig 4. Normalized On-Resistance Vs. Temperature VGS = 0V, f = 1 MHZ Ciss = Cgs + Cgd, Cds SHORTED Crss = Cgd 1 0 TJ , Junction Temperature (°C) Fig 3. Typical Transfer Characteristics C, Capacitance (pF) 1 VDS, Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics 100 12.0 VDS = 48V VDS = 30V 10.0 VDS= 12V 8.0 6.0 4.0 2.0 0.0 0 10 VDS , Drain-to-Source Voltage (V) Fig 5. Typical Capacitance Vs.Drain-to-Source Voltage 3 VGS 10V 8.0V 6.0V 5.0V 4.5V 4.3V 4.0V 3.8V www.irf.com © 2015 International Rectifier 20 30 40 50 60 QG, Total Gate Charge (nC) Fig 6. Typical Gate Charge Vs.Gate-to-Source Voltage Submit Datasheet Feedback March 19, 2015 IRFH5206PbF 1000 ID, Drain-to-Source Current (A) ISD, Reverse Drain Current (A) 1000 100 10 1 OPERATION IN THIS ARE LIMITED BY R DS (on) 100 1msec 100μsec 10 10msec 1 Tc = 25°C Tj = 150°C Single Pulse 0.1 0.1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 0.1 1.6 VSD, Source-to-Drain Voltage (V) 10 100 Fig 8. Maximum Safe Operating Area Fig 7. Typical Source-Drain Diode Forward Voltage 4.0 VGS(th), Gate threshold Voltage (V) 100 80 60 40 20 0 25 50 75 100 125 3.5 3.0 2.5 ID = 150μA ID = 500μA ID = 1.0mA 2.0 ID = 1.0A 1.5 150 -75 -50 -25 TC , CaseTemperature (°C) 0 25 50 75 100 125 150 TJ , Temperature ( °C ) Fig 9. Maximum Drain Current Vs. Case (Bottom) Temperature Fig 10. Threshold Voltage Vs. Temperature 10 Thermal Response ( Z thJC ) ID , Drain Current (A) 1 VDS, Drain-to-Source Voltage (V) 1 D = 0.50 0.20 0.10 0.1 0.05 0.02 0.01 0.01 Notes: 1. Duty Factor D = t1/t2 2. Peak Tj = P dm x Zthjc + Tc SINGLE PULSE ( THERMAL RESPONSE ) 0.001 1E-006 1E-005 0.0001 0.001 0.01 0.1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Case (Bottom) 4 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback March 19, 2015 400 20 EAS , Single Pulse Avalanche Energy (mJ) RDS(on), Drain-to -Source On Resistance (mΩ) IRFH5206PbF ID = 50A 15 TJ = 125°C 10 TJ = 25°C ID 5.1A 13A BOTTOM 50A TOP 300 200 100 0 5 4 6 8 10 12 14 16 18 25 20 50 75 100 125 150 Starting TJ , Junction Temperature (°C) VGS, Gate -to -Source Voltage (V) Fig 13. Maximum Avalanche Energy vs. Drain Current Fig 12. On-Resistance vs. Gate Voltage V(BR)DSS tp 15V DRIVER L VDS D.U.T RG + V - DD IAS 20V A Fig 14a. Unclamped Inductive Test Circuit VDS VGS RG RD Fig 14b. Unclamped Inductive Waveforms VDS 90% D.U.T. + -VDD V10V GS Pulse Width ≤ 1 µs Duty Factor ≤ 0.1 Fig 15a. Switching Time Test Circuit 5 I AS 0.01Ω tp www.irf.com © 2015 International Rectifier 10% VGS td(on) tr td(off) tf Fig 15b. Switching Time Waveforms Submit Datasheet Feedback March 19, 2015 IRFH5206PbF D.U.T Driver Gate Drive + - - * D.U.T. ISD Waveform Reverse Recovery Current + RG • • • • dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test P.W. Period VGS=10V Circuit Layout Considerations • Low Stray Inductance • Ground Plane • Low Leakage Inductance Current Transformer - D= Period P.W. + V DD + Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt Re-Applied Voltage - Body Diode VDD Forward Drop Inductor Curent ISD Ripple ≤ 5% * VGS = 5V for Logic Level Devices Fig 16. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET® Power MOSFETs Id Vds Vgs L DUT 0 1K S VCC Vgs(th) Qgs1 Qgs2 Fig 17. Gate Charge Test Circuit 6 www.irf.com © 2015 International Rectifier Qgd Qgodr Fig 18. Gate Charge Waveform Submit Datasheet Feedback March 19, 2015 IRFH5206PbF PQFN 5x6 Outline "B" Package Details For more information on board mounting, including footprint and stencil recommendation, please refer to application note AN-1136: http://www.irf.com/technical-info/appnotes/an-1136.pdf For more information on package inspection techniques, please refer to application note AN-1154: http://www.irf.com/technical-info/appnotes/an-1154.pdf PQFN 5x6 Part Marking INTERNATIONAL RECTIFIER LOGO DATE CODE ASSEMBLY SITE CODE (Per SCOP 200-002) PIN 1 IDENTIFIER XXXX XYWWX XXXXX PART NUMBER (“4 or 5 digits”) MARKING CODE (Per Marking Spec) LOT CODE (Eng Mode - Min last 4 digits of EATI#) (Prod Mode - 4 digits of SPN code) Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 7 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback March 19, 2015 IRFH5206PbF PQFN Tape and Reel REEL DIMENSIONS TAPE DIMENSIONS CODE Ao Dimension design to accommodate the component width Bo Dimension design to accommodate the component lenght Ko Dimension design to accommodate the component thickness Overall width of the carrier tape Pitch between s ucces sive cavity centers W P1 DES CRIPTION QUADRANT ASSIGNMENTS FOR PIN 1 ORIENTATION IN TAPE Note: All dimens ion are nominal Package T ype Reel Diameter (Inch) QTY Reel Width W1 (mm) Ao (mm) Bo (mm) Ko (mm) P1 (mm) W (mm) Pin 1 Quadrant 5 X 6 PQFN 13 4000 12.4 6.300 5.300 1.20 8.00 12 Q1 Note: For the most current drawing please refer to IR website at: http://www.irf.com/package/ 8 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback March 19, 2015 IRFH5206PbF Qualification information† Indus trial Qualification level (per JE DE C JE S D47F Moisture Sensitivity Level RoHS compliant PQFN 5mm x 6mm †† ††† guidelines ) MS L1 ††† (per JE DE C J-S T D-020D ) Yes Qualification standards can be found at International Rectifier’s web site http://www.irf.com/product-info/reliability Higher qualification ratings may be available should the user have such requirements. Please contact your International Rectifier sales representative for further information: http://www.irf.com/whoto-call/salesrep/ Applicable version of JEDEC standard at the time of product release. Notes: Repetitive rating; pulse width limited by max. junction temperature. Starting TJ = 25°C, L = 0.07mH, RG = 25Ω, IAS = 50A. Pulse width ≤ 400μs; duty cycle ≤ 2%. Rθ is measured at TJ of approximately 90°C. When mounted on 1 inch square 2 oz copper pad on 1.5x1.5 in. board of FR-4 material. Calculated continuous current based on maximum allowable junction temperature. Package is limited to 100A by production test capability Revision History Date 5/14/2014 3/19/2015 Comment • Updated ordering information to reflect the End-Of-life (EOL) of the mini-reel option (EOL notice #259) • Updated Package outline on page 7. • Updated data sheet based on corporate template. • Updated package outline and tape and reel on pages 7 and 8. IR WORLD HEADQUARTERS: 101 N. Sepulveda Blvd., El Segundo, California 90245, USA To contact International Rectifier, please visit http://www.irf.com/whoto-call/ 9 www.irf.com © 2015 International Rectifier Submit Datasheet Feedback March 19, 2015