Datasheet connectPower PRO DC/DC Converter The new electrically isolated PRO DC/DC Converter from Weidmuller compliments the PROmax power supply series. Optimized for the Process, Transportation and Machinery Industry, this converter provides a host of advantages including avoidance of critical earth loops. From an unregulated or distorted input voltage, it generates a stable, low-distortion output voltage. The DC/DC Converter is a versatile solution for all 24 V DC power supply applications. With its HazLoc and Class III protection, it’s also ideal for use in floating ground systems, such as battery backup systems found in marine technology. Integrated features such as LED indicators, status relay and transistor outputs facilitate status and rapid error analysis, monitors the status of the 24V output voltage, and a LED that indicates DC OK status for the output voltage; all providing clear visual aids making trouble shooting quick and easy and optimize machine up-time. • HazLoc C1D2 and ATEX • High efficiency up to 94% • High shock and vibration immunity • Narrow housing • Galvanic isolation: Protection Class III • Super boost with more than 600% * IN for 16ms • Integrated status relay and active switching outputs • Comprehensive international approvals: TUV, UL, GL, DNV, ABS, BV, RINA, LR LISTED Weidmuller, Canada 10 Spy Court Markham, Ontario L3R 5H6 Telephone: (800) 268-4080 Facsimile: (877) 300-5635 Email: [email protected] Website: www.weidmuller.ca Weidmuller, Mexico Blvd. Hermanos Serdán 698, Col. San Rafael Oriente Puebla, Puebla, Mexico C.P. 72029 Telephone: 01 222 2686267 Facsimile: 01 222 2686219 Email: [email protected] Website: www.weidmuller.com.mx Weidmuller, United States 821 Southlake Blvd. Richmond, Virginia 23236 Telephone: (800) 849-9343 Facsimile: (804) 379-2593 Email: [email protected] Website: www.weidmuller.com connectPower PRO DC/DC Converter connectPower PRO DC/DC Converter DC voltage converter for preparation and potential isolation in 24 V DC systems • Overvoltage category III • Class III protection • Status of relay contact • DC OK transistor output Technical data Nominal output current [%] Temperature derating 120 100 80 60 40 20 0 0 -25 10 20 30 40 50 60 70 Nominal output voltage [%] Ambient Temperature [°C] General technical specifications Current limiting Housing version Operating temperature Humidity Humidity at operating temperature Max. perm. air humidity (operational) Storage temperature MTBF Protection against reverse voltages from the load Protective circuit Start-up Clip-in foot Degree of efficiency Mounting position, installation notice 100 75 50 25 0 0 20 40 60 80 100 120 140 160 Nominal output current [%] LED (Gr/Ye/Rd) g r = “DC OK” Ye = “i > 90% iN” LED (Ye) Event Input Output UIN < 14 V – I < 90 % IN UIN = 14…19.2 V I > 90 % IN *1) U < 20.4 V I < 90 % IN UIN > 19.2 V Rd = “FAul T” “l ow u IN” Transistor status outputs Status DC OK i > 90% iN l ow u IN relay OFF ON Low Low Low Gr ON High Low Low Ye ON High High Low ON Rd ON Low Low Low OFF Gr High OFF ON OFF High Low I > 90 % IN Ye OFF High High High ON U < 20.4 V Rd OFF Low Low High OFF ON Gr = grün / green / verte / verde / verde / verde / Ye = gelb / yellow / jaune / giallo / amarillo / amarelo / ௰ Rd = rot / red / rouge / rosso / rojo / vermelho / *1) während des Betriebes / during operations / en cours de fonctionnement / durante l’esercizio / durante el servicio / durante a operação / ੧ଋ३И Short-circuit protection Protection against over-heating Protection degree Surge voltage category EMC / shock / vibration Limiting of mains voltage harmonic currents Vibration resistance IEC 60068-2-6 Shock resistance IEC 60068-2-27 Noise emission acc. to EN55022 Interference immunity test acc. to Insulation coordination Class of protection Insulation voltage input / earth Insulation voltage output / earth Insulation voltage, input / output Surge voltage category Pollution severity Electrical safety (applied standards) Electrical machine equipment Protection against dangerous shock currents Safety extra-low voltage For use with electronic equipment Protective separation / protection against electrical shock Safety transformers for switch-mode power supplies Accessories Diode module 10A for redundancy power Diode module 20A for redundancy power DC UPS for 10A/20A DC UPS for 40A 2 150% Iout Metal, corrosion resistant -25°C...70°C 5 … 95%, no condensation 5 … 95%, no condensation 5% … 95% RH -40°C … 85°C 1,250,000 h 33 … 34 V DC Overtemperature, Short-circuit, Inverse voltage ≥ -40°C Metal typ. 92% Horizontal on TS35 mounting rail. 50mm of clearance at top and bottom for air circulation. Can mount side by side with no space in between. 50mm clearance at top and bottom for free air circulation, mountable side by side without clearance Yes Yes IP20 III in accordance with EN 61000-3-2 2.3 g (15 Hz …150 Hz) 30 g in all directions Class B EN 61000-4-2 (ESD), EN 61000-4-4 (burst), EN 61000-4-5 (surge), EN 61000-4-6 (conducted), EN61000-4-3 (HF field) III, with no ground connection, for SELV 1.5 kV 0.5 kV 1.5 kV III 2 Acc. to EN60204 Acc. to VDE0106-101 SELV acc. to EN60950, PELV acc. to EN60204 Acc. to EN50178 / VDE0160 VDE0100-410 / acc. to DIN57100-410 nach EN61558-2-16 Type CP DM 10 CP M DM 20 CP DC UPS 24V 20A/10A CP DC UPS 24V 40A Qty. 1 1 1 1 Part No. 8710620000 1222210000 1370050010 1370040010 connectPower PRO DC/DC Converter connectPower PRO DC/DC Converter D PRO DCDC 120W 24V 5A + – DC H DC W + + – – – DC OK I > 90 % IN Low UIN Technical data Input data Rated input voltage DC input voltage range Inrush current Input fuse (internal) Turn-on current limit Recommended back-up fuse Output data Capacitive load Output current Output voltage Parallel connection option Protection against inverse voltage Rated output voltage Continuous output current @ URated Output power Short-circuit protection Overload protection Power boost @ URated Ramp-up time Residual ripple, breaking spikes General data AC failure bridging time @ INom Power loss, nominal load Power loss, idling Protection against reverse voltages from the load Width x Height x Depth in. (mm) Net weight Signaling Contact Load (NO contact) Floating contact Relay on/off Transistor output, positive-switching Connection data Connection system Number of terminals Conductor cross-section, AWG/kcmil, min/max Conductor cross-section, flexible, min/max mm² Conductor cross-section, rigid, min/max mm² Tightening torque Wire connection cross section, flexible (input), max. Reverse polarity protection Approvals Classifications Approvals Ordering data 24 V DC 14…32 V (during operation), 18…32 V (commissioning) max. 10 A Yes Yes 10 A, Char. B circuit breaker, 10 A, Char. C circuit breaker unrestricted 5A 22.5...29.5 V Yes, max. 5 (without diode module) Yes 24 V DC ± 1% 5 A @ 60°C, 6 A @ 45°C, 3.75 A @ 70°C 120W Yes Yes 600% IN for 16 ms ≤ 9 ms (Uout: 10%...90%) max. 20 mVpp @ 24 V DC, IN > 10 ms @ 24 V DC 11 W 2W 33...34 V DC 1.26” x 5.118” x 4.724” (32 x 130 x 120) 791 g DC OK: 20 mA max., short-circuit-proof, I > 90%: 20 mA max., short-circuit-proof, Low UIN: 20 mA max., short-circuit-proof Input Output Screw connection pluggable 2 for (+, -) 8 (+ / - / signal) 30 / 12 24 / 14 0.2 / 4 0.2 / 2.5 0.2 / 4 0.2 / 2.5 0.4 … 0.5 Nm 4 mm² Yes eClass 6.2, 27-14-91-90 ROHS Conform Type PRO DCDC 120W 24V 5A Qty. 1 Part No. 2001800000 3 connectPower PRO DC/DC Converter connectPower PRO DC/DC Converter D PRO DCDC 240W 24V 10A + – + + – – – DC OK I > 90 % IN Low UIN 13 14 DC H PRO DCDC 480W 24V 20A DC W + – + + – – – DC OK I > 90 % IN Low UIN 13 14 DC DC Technical data Input data Rated input voltage DC input voltage range Inrush current Input fuse (internal) Turn-on current limit Recommended back-up fuse Output data Capacitive load Output current Output voltage Parallel connection option Protection against inverse voltage Rated output voltage Continuous output current @ URated Output power Short-circuit protection Overload protection Power boost @ URated Ramp-up time Residual ripple, breaking spikes General data AC failure bridging time @ INom Power loss, nominal load Power loss, idling Protection against reverse voltages from the load Width x Height x Depth in. (mm) Net weight Signaling Contact Load (NO contact) Floating contact Relay on/off Transistor output, positive-switching Connection data Connection system Number of terminals Conductor cross-section, AWG/kcmil, min/max Conductor cross-section, flexible, min/max mm² Conductor cross-section, rigid, min/max mm² Tightening torque Wire connection cross section, flexible (input), max. Reverse polarity protection Approvals Classifications Approvals Ordering data 4 24 V DC 14…32 V (during operation), 18…32 V (commissioning) max. 15 A Yes Yes 25 A, Char. B circuit breaker, 25 A, Char. C circuit breaker 24 V DC 14…32 V (during operation), 18…32 V (commissioning) max. 30 A Yes Yes 40 A, Char. B circuit breaker, 40 A, Char. C circuit breaker unrestricted 10 A 22.5...29.5 V Yes, max. 5 (without diode module) Yes 24 V DC ± 1% 10 A @ 60°C, 12 A @ 45°C, 7.5 A @ 70°C 240W Yes Yes 600% IN for 16 ms ≤ 9 ms (Uout: 10%...90%) max. 20 mVpp @ 24 V DC, IN unrestricted 20 A 22.5...29.5 V Yes, max. 3 Yes 24 V DC ± 1% 20 A @ 60°C, 24 A @ 45°C, 15 A @ 70°C 480W Yes Yes 600% IN for 16 ms ≤ 9 ms (Uout: 10%...90%) max. 20 mVpp @ 24 V DC, IN > 12 ms @ 24 V DC 22 W 2W 33...34 V DC 1.693” x 5.118” x 4.724” (43 x 130 x 120) 1,112 g > 10 ms @ 24 V DC 40 W 3W 33...34 V DC 2.953” x 5.118” x 4.724” (75 x 130 x 120) 1,300 g max. 30 V / 0.5 A Yes Output voltage > 21.6 V / < 20.4 V DC OK: 20 mA max., short-circuit-proof, I > 90%: 20 mA max., short-circuit-proof, Low UIN: 20 mA max., short-circuit-proof Input Output Screw connection pluggable 2 for (+, -) 10 (+ / - / signal) 30 / 12 24 / 14 0.8 / 4 0.2 / 2.5 0.8 / 4 0.2 / 2.5 0.4 … 0.5 Nm 4 mm² Yes max. 30 V / 0.5 A Yes Output voltage > 21.6 V / < 20.4 V DC OK: 20 mA max., short-circuit-proof, I > 90%: 20 mA max., short-circuit-proof, Low UIN: 20 mA max., short-circuit-proof Input Output Screw connection pluggable 2 for (+, -) 10 (+ / - / signal) 22 / 8 26 / 10 0.5 / 16 0.18 / 6 0.5 / 16 0.18 / 6 0.4 … 0.5 Nm 16 mm² Yes eClass 6.2, 27-14-91-90 ROHS Conform eClass 6.2, 27-14-91-90 ROHS Conform Type PRO DCDC 240W 24V 10A Qty. Part No. 1 2001810000 Type PRO DCDC 480W 24V 20A Qty. Part No. 1 2001820000 Subject to technical changes · 04/16 · LIT1606E