Download

Signal converters in 6 mm width
Contents
Signal converters in 6 mm width
Signal converters in 6 mm width
2028820000
Universal signal converter in 6 mm width – Overview
C.2
ACT20M – Overview
C.4
CH20M rail bus
C.26
MCZ-SERIES – Overview
C.30
MCZ SERIES – DC/DC passive isolator
C.32
MCZ-SERIES – PT100 /RTD signal converter
C.33
MCZ-SERIES – Frequency signal converter
C.34
MCZ-SERIES – Threshold monitoring
C.35
C
C.1
Signal converters in 6 mm width
Universal signal converter in 6 mm width – Overview
Analogue signal converter in 6 mm width
The thinnest signal converter for isolating,
converting and monitoring analogue signals
The signal converters and the signal separators in the
product family ACT20M, MICROSERIES and the MCZ
enables the user to integrate many signal channels within
a compact space. In addition to galvanic separation, these
products offer the conversion and conditioning of DC and
C
C.2
temperature signals (TC and RTD) to standard norm signals
(e.g. 4…20 mA, 0…10 V). The pluggable cross-connections
option for MAS/MAZ and MCZ ranges, or the Weidmüller
rail bus option for the ACT20M ensure a quick installation.
2028820000
Signal converters in 6 mm width
Universal signal converter in 6 mm width – Overview
C
=RQH
&ODVV'LY
ACT20M
MCZ-SERIES
2028820000
C.3
Signal converters in 6 mm width
ACT20M – Overview
ACT20M – a narrow 6 mm signal converter
The new dimension for converting and isolating –
housed in a 6 mm width
The new ACT20M range combines innovative technologies
with the highest levels of functionality in an electronics
housing measuring just 6 mm in width. Up to two channels
per module result in space savings in the electrical cabinet.
The high electrical isolation of 2.5 kV and an accuracy of
up to 0.05 % both help to ensure a high degree of process
reliability.
C
C.4
The product line consists of Input Loop Powered, Output
Loop Powered and Auxiliary Powered analog isolators and
converters, including a universal input converter.
The eight-connection housing allows additional functionality
such as 2 channel ILP, 2 channel OLP isolation and signal
splitting with input powering option. The configuration is
carried out via DIP switches or the FDT/ DTM software. The
ACT20M modules are supplied via direct wiring or a rail bus.
2028820000
Signal converters in 6 mm width
ACT20M – Overview
The DIP switch can be configured
simply on the module
In the “ACT20M Tool” software, simply
select the type of input and output,
and set the DIP switch configuration as
displayed.
C
Easy configuration
DIP switches on the side are used
to configure the input and output
parameters, as well as the response
time.
Signal splitter
Signal converter
High level of galvanic isolation
U, I,
R, T
U,I
PS
2.5 kV of electrical isolation
(300 V rated voltage) ensures excellent
process reliability.
Universal measurement and
signal converter
Installation is simple and quick
The power supply is simply snapped
onto the rail bus for fast and easy
installation. The supply can be through
any ACT20M module or a separate
power-feed unit.
\
;
Passive isolator
Temperature transducer
Approvals
Fulfils the strict standards and requirements of the process industry. Can be
used worldwide due to international and
local approvals ATEX, IECEX, CULUS,
FM, GL and DNV.
CH20M rail bus
Power-feed modules
2028820000
C.5
Signal converters in 6 mm width
ACT20M - Overview
ACT20M – Selection table
Current
Power supply
C
0 … 20 mA
24 V DC and rail bus
Function
0 … 20 mA
1-channel
4 … 20 mA
1-channel
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
2 x 0 … 20 mA
2-channel / splitter
2 x 4 … 20 mA
2-channel / splitter
U/I
ACT20M-AI-2AO-S
ACT20M-AI-2AO-S
Current
ACT20M-CI-2CO-S
ACT20M-CI-2CO-S
U/I
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
U/I
ACT20M-AI-AO-S
ACT20M-AI-AO-S
Current
ACT20M-CI-CO-S
ACT20M-CI-CO-S
U/I
Input Loop Powered
Current
Output Loop Powered
Current
ACT20M-CI-CO-OLP-S
Current
2 x 0 … 20 mA
Current
Current
24 V DC
Current
24 V DC and rail bus
Current
4 … 20 mA
Output Loop Powered
Input Loop Powered
universal
ACT20M-2CI-2CO-OLP-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
U/I
ACT20M-AI-2AO-S
ACT20M-AI-2AO-S
Current
ACT20M-CI-2CO-S
ACT20M-CI-2CO-S
U/I
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
U/I
ACT20M-AI-AO-S
ACT20M-AI-AO-S
Current
ACT20M-CI-CO-S
ACT20M-CI-CO-S
U/I
1 x 4 … 20 mA
Output Loop Powered
Current
ACT20M-CI-CO-OLP-S
Input
Current
2 x 4 … 20 mA
Output Loop Powered
Current
24 V DC
Current
Input Loop Powered
Current
ACT20M-2CI-2CO-OLP-S
Current
ACT20M-2CI-2CO-ILP-S
ACT20M-2CI-2CO-ILP-S
1 x 4 … 20 mA
Input Loop Powered
Current
ACT20M-CI-CO-ILP-S
–10 mA…0…10 mA
24 V DC and rail bus
bipolar
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
–20 mA…0…20 mA
24 V DC and rail bus
bipolar
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
with sensor power supply 24 V DC and rail bus
0…5V
1…5V
24 V DC and rail bus
Current
ACT20M-CI-CO-ILP-S
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
U/I
ACT20M-AI-AO-S
ACT20M-AI-AO-S
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
U/I
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
U/I
ACT20M-AI-AO-S
ACT20M-AI-AO-S
U/I
Voltage
Output Loop Powered
0 …10 V
2 … 10 V
24 V DC and rail bus
U/I
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
U/I
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
U/I
ACT20M-AI-AO-S
ACT20M-AI-AO-S
U/I
Output Loop Powered
U/I
–5 V … 0 … 5 V
24 V DC and rail bus
bipolar
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
–10 V… 0 …10 V
24 V DC and rail bus
bipolar
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
bipolar
Note:
C.6
*) available from July 2013
2028820000
Signal converters in 6 mm width
ACT20M - Overview
Output
Voltage
–10 mA … 0 … 10 mA
1-channel bipolar
–20 mA … 0 … 20 mA
1-channel bipolar
0…5V/1…5V
1-channel
0 … 10 V / 2 … 10 V
1-channel
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-AI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-AI-AO-S
2x0…5V/2x1…5V
2-channel / splitter
2 x 0 … 10 V / 2 x 2 … 10 V -10 V… 0 … 10 V
2-channel / splitter
1-channel
ACT20M-AI-2AO-S
ACT20M-AI-2AO-S
ACT20M-AI-2AO-S
ACT20M-AI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-S
ACT20M-AI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-AI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-E-S
ACT20M-AI-AO-S
ACT20M-AI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-AO-S
ACT20M-BAI-2AO-S
ACT20M-BAI-2AO-S
2028820000
C
C.7
Signal converters in 6 mm width
ACT20M - Overview
ACT20M – Selection table
Current
C
PT100
Power supply
Function
Output Loop Powered
Temp.
0 … 20 mA
1-channel
2-, 3-, 4-conductor
Input
24 V DC and rail bus
C.8
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
Temp.
ACT20M-RTI-AO-S
ACT20M-RTI-AO-S
Temp.
PT1000
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
Ni100
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
NI1000
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
B
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
E
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
J
Output Loop Powered
Temp.
24 V DC
Temp.
ACT20M-TCI-AO-E-S
ACT20M-TCI-AO-E-S
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
Temp.
ACT20M-TCI-AO-S
ACT20M-TCI-AO-S
ACT20M-RTI-AO-S
ACT20M-RTI-AO-S
ACT20M-RTCI-CO-OLP-S
Temp.
Temp.
K
ACT20M-RTCI-CO-OLP-S
Output Loop Powered
Temp.
24 V DC and rail bus
Temp.
ACT20M-TCI-AO-E-S
ACT20M-TCI-AO-E-S
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
Temp.
ACT20M-TCI-AO-S
ACT20M-TCI-AO-S
Temp.
ACT20M-RTI-AO-S
ACT20M-RTI-AO-S
TC
Note:
ACT20M-RTI-AO-E-S
Temp.
24 V DC
Poti
R
2 x 4 … 20 mA
2-channel / splitter
ACT20M-RTI-CO-EOLP-S
ACT20M-RTI-AO-E-S
Temp.
2 x 0 … 20 mA
2-channel / splitter
ACT20M-RTCI-CO-OLP-S
Temp.
24 V DC
4 … 20 mA
1-channel
Temp.
L
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
LR
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
N
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
R
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
S
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
T
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
U
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
W3
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
W5
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
10R …100k
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
10R …100k
24 V DC and rail bus
universal
ACT20M-UI-AO-S
ACT20M-UI-AO-S
*) available from July 2013
2028820000
Signal converters in 6 mm width
ACT20M - Overview
Output
Voltage
–10 mA … 0 … 10 mA
1-channel bipolar
2028820000
–20 mA … 0 … 20 mA
1-channel bipolar
0…5V/1…5V
1-channel
0 … 10 V / 2 … 10 V
1-channel
ACT20M-RTI-AO-E-S
ACT20M-RTI-AO-E-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-RTI-AO-S
ACT20M-RTI-AO-S
ACT20M-RTCI-AO-S
ACT20M-RTCI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-TCI-AO-E-S
ACT20M-TCI-AO-E-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-TCI-AO-S
ACT20M-TCI-AO-S
ACT20M-RTI-AO-S
ACT20M-RTI-AO-S
ACT20M-TCI-AO-E-S
ACT20M-TCI-AO-E-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-TCI-AO-S
ACT20M-TCI-AO-S
ACT20M-RTI-AO-S
ACT20M-RTI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
ACT20M-UI-AO-S
2x0…5V/2x1…5V
2-channel / splitter
2 x 0 … 10 V / 2 x 2 … 10 V -10 V… 0 … 10 V
2-channel / splitter
1-channel
C
C.9
Signal converters in 6 mm width
ACT20M
Signal splitter
ACT20M-CI-2CO-S
• Isolation and doubling of DC signals
• Power supply via the mounting rail bus
• 4-way isolation
+
-
Input
Output
ch. 1
+
mA
-
Output
ch. 2
Supply
+
mA
-
+
-
Supply
I IN
C
I OUT 2
4
5
3
6
2
7
1
82
83
I OUT 1
Supply
8
PLC
24 V
DC
230 V
AC
Supply
Technical data
Electrical connections
ACT20M-CI-2CO-S
Input
Input current
Voltage drop, current input
Output
Output current
load impedance current
General data
Configuration
Supply voltage
Ambient temperature
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
Power consumption, typ.
Power consumption, max.
Step response time
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
0...20 mA, 4…20mA
< 1.5 V
Terminal
Input
mA
0...20 mA, 4...20 mA
< 300 Ω, per channel, @ max 23mA
1
2
3
4
5
6
7
8
◼=+
◻=–
none
24 V DC ± 30 %
-25 °C...70 °C
< 0.05 % of measuring range
≤ 0.01 % / °C
100 Hz
400 mW
0.8 W
≤ 7 ms
Power
Supply
Output 1
mA
Output 2
mA
◻
◼
◻
◼
◼
◻
◼
◻
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
CE; cULus; DETNORVER; EAC; FMEX; GL; GOSTME25; IECEXKEM;
KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Power supply optionally over the DIN mounting rail CH20M
Ordering data
Screw connection
Type
ACT20M-CI-2CO-S
Qty.
1
Order No.
1175990000
Note
Accessories
Note
C.10
DIN mounting rail, see Accessories
2028820000
Signal splitter
Signal converters in 6 mm width
ACT20M
ACT20M-AI-2AO-S
• Isolation, conversion and doubling of DC signals
• Configuration via DIP switches
• Power supply via the mounting rail bus
• 4-way isolation
• Support for adjustment by ACT20M Tool software,
download link at www.weidmueller.com
+
-
+
+
-
Tx
+
mA
-
-
Output
ch. 1
+
V
Input
Output
ch. 2
Supply
+
+
-
-
V
mA
+
-
Supply
I, U
4
5
I, U
IN
3
6
OUT 1
I, U
2
7
OUT 2
1
82
83
Supply
8
PLC
24 V
DC
C
230 V
AC
Supply
Technical data
Electrical connections
ACT20M-AI-2AO-S
Input
Input current
Input voltage
Sensor supply
Input resistance, voltage
Voltage drop, current input
Output
Output current
Output voltage
load impedance current
load impedance voltage
General data
Configuration
Supply voltage
Ambient temperature
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
Power consumption, typ.
Power consumption, max.
Step response time
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
0...20 mA, 4…20mA
0…10 V, 0…5 V
> 17 V DC at 20 mA
500 kΩ
< 1.5 V
Input
Terminal
V
1
2
3
4
5
6
7
8
◼=+
◻=–
adjustable, 0...20 mA, 4...20 mA
adjustable, 0...10 V, 0...5 V
< 300 Ω, per channel, @ max 23mA
≥ 10 kΩ
DIP switch
24 V DC ± 30 %
-25 °C...70 °C
< 0.05 % of measuring range
≤ 0.01 % / °C
100 Hz
400 mW
1.2 W
≤ 7 ms
◼
◻
mA
mA Loop
◻
◼
Output 1
Power
supply
V
mA
Output 2
V
mA
◻
◼
◻
◼
◼
◻
◼
◻
◼
◻
◼
◻
DIP switch settings
Input
Range
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
CE; cULus; DETNORVER; EAC; FMEX; GL; GOSTME25; IECEXKEM;
KEMAATEX
Output 1
Output 2
1
2
3
4
5
6
7
8
9
10
0 … 20 mA
4 … 20 mA
0 … 10 V
2 … 10 V
0…5V
1 …5 V
0 ... 20 mA loop ◼
4 ... 20 mA loop ◼
◻
◻
◼
◼
◼
◼
◻
◻
◻
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
◻
◻
◻
◻
◼
◼
◼
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
◻
◻
◼
◼
◼
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
◼ = on
◻ = off
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Power supply optionally over the DIN mounting rail CH20M
Ordering data
Screw connection
Type
ACT20M-AI-2AO-S
Qty.
1
Order No.
1176020000
Note
Accessories
Note
2028820000
DIN mounting rail, see Accessories
C.11
Signal converters in 6 mm width
ACT20M
Signal splitter
ACT20M-BAI-2AO-S
• Isolation and conversion of bipolar DC signals
• Splitting into standard signal or bipolar output
• Configuration via DIP switches
• Power supply via the mounting rail bus
• 4-way isolation
• Support for adjustment by ACT20M Tool software,
download link at www.weidmueller.com
-
+
(±)
+
(±)
-
+
V
-
Input
+
mA
-
Output
ch. 1
Output
ch. 2
Supply
+
+
-
-
V
mA
+
-
Supply
C
I, U
4
5
I, U
IN
3
6
OUT 1
I, U
2
7
OUT 2
1
82
83
Supply
PLC
24 V
DC
8
230 V
AC
Supply
Technical data
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Electrical connections
ACT20M-BAI-2AO-S
-10 mA…0…+10 mA, -20 mA…0…+20 mA
-5 V…0…+5 V, -10 V…0…+10 V
Input
Terminal
V
adjustable, 0...20 mA, 4...20 mA, ± 10mA, ± 20mA
adjustable, 0...10 V, 0...5 V
< 300 Ω, per channel
≥ 10 kΩ
1
2
3
4
5
6
7
8
◼=+
◻=–
24 V DC ± 30 %
-25 °C...70 °C
-40 °C...85 °C
< 0.05 % of measuring range
< 0.01% of span/°C (TU)
≥ 100 Hz, 10 Hz
mA
◼
◻
Output 1
Power
supply
V
Output 2
mA
V
mA
◻
◼
◻
◼
◻
◼
◼
◻
◼
◻
◼
◻
DIP switch settings
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
Range
Bandwidth
Input
Input current
Input voltage
Output
Output current
Output voltage
load impedance current
load impedance voltage
General data
Supply voltage
Ambient temperature
Storage temperature
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
Approvals
1
cULus; DETNORVER; EAC; FMEX; GL; IECEXKEM; KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
10 Hz
100 Hz
-10...+10 mA
-20...+20 mA
-5...+5 V
-10...+10 V
0 … 20 mA
4 … 20 mA
0 … 10 V
2 … 10 V
0…5V
1 …5 V
±20 mA set-up
±10 mA set-up
Input
Output 1
2
3
4
◼
◼
◻
◻
◼
◼
◻
◻
◼
◻
◼
◻
Output 2
5
6
7
8
9
10
◻
◻
◼
◼
◼
◼
◻
◻
◻
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
◼
◼
◻
◻
◼
◼
◼
◼
◻
◻
◻
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
◼
◼
◼
◻
◼ = on
◻ = off
Ordering data
Type
ACT20M-BAI-2AO-S
Qty.
1
Order No.
1375470000
Note
Accessories
Note
C.12
DIN mounting rail, see accessories
2028820000
Signal isolator
Signal converters in 6 mm width
ACT20M
ACT20M-CI-CO-S
• Isolation of DC signals
• Power supply via the mounting rail bus
• 3-way isolation
+
-
Input
+
mA
-
Output
ch. 2
Output
ch. 1
Supply
+
mA
-
+
-
Supply
I IN
4
5
3
6
2
7
1
82
83
8
I OUT
Supply
PLC
24 V
DC
C
230 V
AC
Supply
Technical data
Electrical connections
ACT20M-CI-CO-S
Input
Input current
Voltage drop, current input
Output
Output current
load impedance current
General data
Configuration
Supply voltage
Ambient temperature
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
Power consumption, typ.
Power consumption, max.
Step response time
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
0...20 mA, 4…20mA
< 1.5 V
Terminal
Input
mA
0...20 mA, 4...20 mA
≤ 600 Ω, @ max 23mA
1
2
3
4
5
6
7
8
◼=+
◻=–
none
24 V DC ± 30 %
-25 °C...70 °C
< 0.05 % of measuring range
≤ 0.01 % / °C
100 Hz
400 mW
0.8
≤ 7 ms
Power
Supply
Output 1
mA
◻
◼
◼
◻
◼
◻
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
CE; cULus; DETNORVER; EAC; FMEX; GL; GOSTME25; IECEXKEM;
KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Power supply optionally over the DIN mounting rail CH20M
Ordering data
Screw connection
Type
ACT20M-CI-CO-S
Qty.
1
Order No.
1175980000
Note
Accessories
Note
2028820000
DIN mounting rail, see Accessories
C.13
Signal converters in 6 mm width
ACT20M
Signal converter
ACT20M-AI-AO-S
• Isolation and conversion of DC signals
• Configuration via DIP switches
• Power supply via the mounting rail bus
• 3-way isolation
• Support for adjustment by ACT20M Tool software,
download link at www.weidmueller.com
+
-
+
+
-
Tx
+
mA
-
Output
ch. 1
+
V
Input
-
Output
ch. 2
Supply
+
+
-
-
V
mA
+
-
Supply
I, U
4
5
I, U
IN
3
6
OUT
2
7
C
1
82
83
PLC
Supply
8
24 V
DC
230 V
AC
Supply
Technical data
Electrical connections
ACT20M-AI-AO-S
Input
Input current
Input voltage
Sensor supply
Input resistance, voltage
Voltage drop, current input
Output
Output current
Output voltage
load impedance current
load impedance voltage
General data
Configuration
Supply voltage
Ambient temperature
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
Power consumption, typ.
Power consumption, max.
Step response time
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
0...20 mA, 4…20mA
0…10 V, 0…5 V
> 17 V DC at 20 mA
>500 kΩ
<1,5 V
Input
Terminal
1
2
3
4
5
6
7
8
◼=+
◻=–
adjustable, 0...20 mA, 4...20 mA
adjustable, 0...10 V, 0...5 V
≤ 600 Ω, @ max 23mA
≥ 10 kΩ
DIP switch
24 V DC ± 30 %
-25 °C...70 °C
< 0.05 % of measuring range
≤ 0.01 % / °C
100 Hz
400 mW
1.2 W
≤ 7 ms
V
mA
mA Loop
◼
◻
◻
◼
◼
◻
Output 1
Power
supply
V
mA
◼
◻
◼
◻
◼
◻
DIP switch settings
Input
Range
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
CE; cULus; DETNORVER; EAC; FMEX; GL; GOSTME25; IECEXKEM;
KEMAATEX
Output
1
2
3
4
5
6
7
0 … 20 mA
4 … 20 mA
0 … 10 V
2 … 10 V
0…5V
1 …5 V
0 ... 20 mA loop ◼
4 ... 20 mA loop ◼
◻
◻
◼
◼
◼
◼
◻
◻
◻
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
◻
◻
◻
◻
◼
◼
◼
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
8
9
10
◼ = on
◻ = off
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Power supply optionally over the DIN mounting rail CH20M
Ordering data
Screw connection
Type
ACT20M-AI-AO-S
Qty.
1
Order No.
1176000000
Note
Accessories
Note
C.14
DIN mounting rail, see Accessories
2028820000
Signal converter
Signal converters in 6 mm width
ACT20M
ACT20M-AI-AO-E-S
• Isolation and conversion of DC signals
• Configuration via DIP switches
• Power supply via the mounting rail bus
• 3-way isolation
• Support for adjustment by ACT20M Tool software,
download link at www.weidmueller.com
-
+
+
-
Input
Output
ch. 1
+
+
-
-
Supply
V
mA
+
-
Supply
I, U
4
5
I, U
IN
3
6
OUT
2
7
1
82
83
PLC
Supply
8
24 V
DC
C
230 V
AC
Supply
Technical data
Electrical connections
ACT20M-AI-AO-E-S
Input
Input current
Input voltage
Input resistance, voltage
Voltage drop, current input
Output
Output current
Output voltage
load impedance current
load impedance voltage
General data
Configuration
Supply voltage
Ambient temperature
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
Power consumption, typ.
Power consumption, max.
Step response time
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
0...20 mA, 4…20mA
0…10 V, 0…5 V
>500 kΩ
<1,5 V
Input
Terminal
1
2
3
4
5
6
7
8
◼=+
◻=–
adjustable, 0...20 mA, 4...20 mA
adjustable, 0...10 V, 0...5 V
≤ 600 Ω, @ max 23mA
≥ 10 kΩ
DIP switch
24 V DC ± 30 %
0 °C...70 °C
< 0.2 % of measuring range
≤ 0.015 % / °C
100 Hz
400 mW
1.2 W
≤ 7 ms
V
mA
◼
◻
◻
◼
Output 1
Power
supply
V
mA
◼
◻
◼
◻
◼
◻
DIP switch settings
Input
Range
1
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
CE; cULus; DETNORVER; EAC; GL; GOSTME25
0 … 20 mA
4 … 20 mA
0 … 10 V
2 … 10 V
0…5V
1 …5 V
Output
2
3
4
5
6
7
◻
◻
◼
◼
◼
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
◻
◻
◼
◼
◼
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
8
9
10
◼ = on
◻ = off
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Power supply optionally over the DIN mounting rail CH20M
Ordering data
Screw connection
Type
ACT20M-AI-AO-E-S
Qty.
1
Order No.
1176010000
Note
Accessories
Note
2028820000
DIN mounting rail, see Accessories
C.15
Signal converters in 6 mm width
ACT20M
Signal converter
ACT20M-BAI-AO-S
• Isolation and conversion of bipolar DC signals into
standard signals
• Configuration via DIP switches
• Power supply via the mounting rail bus
• 3-way isolation
• Support for adjustment by ACT20M Tool software,
download link at www.weidmueller.com
-
+
(±)
+
(±)
-
+
V
-
Input
+
mA
-
Output
ch. 1
Output
ch. 2
Supply
+
+
-
-
mA
V
+
-
Supply
I, U
4
5
I, U
IN
3
6
OUT
2
7
C
1
82
83
PLC
Supply
24 V
DC
8
230 V
AC
Supply
Technical data
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Electrical connections
ACT20M-BAI-AO-S
-10 mA…0…+10 mA, -20 mA…0…+20 mA
-5 V…0…+5 V, -10 V…0…+10 V
Input
Terminal
0...20 mA, 4...20 mA
adjustable, 0...10 V, 0...5 V
≤ 600 Ω
≥ 10 kΩ
1
2
3
4
5
6
7
8
◼=+
◻=–
DIP switch
24 V DC ± 30 %
-25 °C...70 °C
-40 °C...85 °C
< 0.05 % of measuring range
< 0.01% of span/°C (TU)
≥ 100 Hz, 10 Hz
V
mA
◼
◻
◻
◼
Output 1
Power
supply
V
mA
◼
◻
◼
◻
◼
◻
DIP switch settings
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
Range
Bandwidth
Input
Input current
Input voltage
Output
Output current
Output voltage
load impedance current
load impedance voltage
General data
Configuration
Supply voltage
Ambient temperature
Storage temperature
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
Approvals
1
cULus; DETNORVER; EAC; FMEX; GL; IECEXKEM; KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
10 Hz
100 Hz
-10...+10 mA
-20...+20 mA
-5...+5 V
-10...+10 V
0 … 20 mA
4 … 20 mA
0 … 10 V
2 … 10 V
0…5V
1 …5 V
±20 mA set-up
±10 mA set-up
Input
Output
2
3
4
◼
◼
◻
◻
◼
◼
◻
◻
◼
◻
◼
◻
5
6
7
◻
◻
◼
◼
◼
◼
◻
◼
◻
◼
◻
◼
◻
◻
◻
◻
◼
◼
8
9
10
◼
◻
◼ = on
◻ = off
Power supply optionally via mounting rail bus CH20M
Ordering data
Type
ACT20M-BAI-AO-S
Qty.
1
Order No.
1375450000
Note
Accessories
Note
C.16
Mounting rail bus, see accessories
2028820000
Universal measurement and
signal converter
ACT20M-UI-AO-S
• Isolation and conversion of temperature signals and DC
signals
• Configuration using FDT/DTM software
• Power supply via the mounting rail bus
• 3-way isolation
+
+
Tx
-
+
-
-
-
Output
Input
+
Supply
+
-
V
+
mA
-
+
-
Signal converters in 6 mm width
ACT20M
Supply
+
Tx
I, U, R
IN
-
4
5
I, U
3
6
OUT
2
1
7
82
83
Supply
PLC
24 V
DC
8
+
-
Output
Input
Supply
230 V
AC
Supply
+
-
V
+
mA
-
+
-
C
Supply
Technical data
Electrical connections
Input
Sensor
Thermocouples: B, E, J, K, L, LR, N, R, N, R, S, T, U, W3, W5, RTD:
PT100, PT1000, Ni100, Ni1000, 2-/3-/4-wire
10 Ω…10 kΩ
10 Ω…10 kΩ
0...20 mA, 4…20mA
0…10 V, 0…5 V
> 10 MΩ
<3V
> 15 V DC at 20 mA
Potentiometer
Resistance
Input current
Input voltage
Input resistance, voltage
Voltage drop, current input
Sensor supply
Output
Output current
Output voltage
load impedance current
load impedance voltage
General data
Configuration
Supply voltage
Ambient temperature
Accuracy
Temperature coefficient
Power consumption, typ.
Power consumption, max.
Step response time
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
adjustable, 0...20 mA, 4...20 mA
adjustable, 0...10 V, 0...5 V
≤ 600 Ω, @ max 28mA
≥ 10 kΩ
ACT20M-UI-AO-S
Input
Terminal
RTD
mA
V mA
POT TC
Loop 2 wire 3 wire 4 wire
1
2
◻ ◻
3
◼
4
◼
5
6
7
8
◼=+
◻=–
R
R
Power
supply
Sense- Sense◼
RR- R ◻
R+
R+ R
Sense+ R
Output
V mA
◻ ◻
◼ ◼
◻ ◻
◼
◻
With FDT/DTM software
24 V DC ± 30 %
-25 °C...70 °C
< 0.1 % of measuring range
≤ 0.01 % / °C
400 mW
1.2 W
400 ms (10...90%) @ U/I, 1 s @ temp
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
cULus; DETNORVER; EAC; FMEX; GL; GOSTME25; IECEXKEM;
KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Power supply optionally over the DIN mounting rail CH20M
Ordering data
Screw connection
Type
ACT20M-UI-AO-S
Qty.
1
Order No.
1176030000
Note
Accessories
Note
2028820000
CBX200 USB configuration adapter - 8978580000
DIN mounting rail, see Accessories
C.17
Signal converters in 6 mm width
ACT20M
Passive isolator
ACT20M-CI-CO-ILP-S
• Isolation of DC signals without additional voltage supply
• Supply from the input measuring circuit
• Optionally available as a 1-channel / 2-channel version
• 2-way isolation
+
-
+
-
I IN 1
C
I IN 2
24 V
DC
4
5
3
6
2
7
1
8
I OUT 1
PLC
I OUT 2
PLC
Input
ch. 1
Output
ch. 1
Input
ch. 2
Output
ch. 2
+
0-20mA
RLoad
-
+
0-20mA
RLoad
-
230 V
AC
Technical data
Electrical connections
ACT20M-CI-2CO-S
Input
Voltage drop, current input
Input current
Output
Output current
load impedance current
General data
Configuration
Ambient temperature
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
Power consumption, max.
Supply voltage
Step response time
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
1.25 V + 0.015 Vout @25°C
0...20 mA, 4…20mA
Terminal
0...20 mA, 4...20 mA
≤ 600 Ω, @ max 23mA
1
2
3
4
5
6
7
8
none
-25 °C...70 °C
< 0.1 % of measuring range
≤ 0.01 % / °C
100 Hz
30 mW per channel
Loop powered, via 4...20 mA input
≤ 5 ms
Input 1
Output 1
mA
mA
Input 2
Output 2
mA
mA
◻
◼
◻
◼
◼
◻
◼
◻
Electrical connections
ACT20M-CI-CO-ILP-S
2.5 kVeff
300 Veff
IEC 61326-1, NE 21
2
II
cULus; DETNORVER; EAC; FMEX; GL; GOSTME25; IECEXKEM;
KEMAATEX
Terminal
1
2
3
4
5
6
7
8
◼=+
◻=–
Input 1
Output 1
mA
mA
◻
◼
◼
◻
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Power supply optionally over the DIN mounting rail CH20M
Ordering data
1-channel version
2-channel version
Type
ACT20M-CI-CO-ILP-S
ACT20M-2CI-2CO-ILP-S
Qty.
1
1
Order No.
1176070000
1176080000
Note
Accessories
Note
C.18
DIN mounting rail, see Accessories
2028820000
Passive isolator
Signal converters in 6 mm width
ACT20M
ACT20M-CI-CO-OLP-S
• Isolation of DC signals without additional voltage supply
• Supply from the output measurement circuit
• Optionally available as a 1-channel / 2-channel version
• 2-way isolation
+
-
+
Tx
Tx
-
I IN 1
I IN 2
4
5
3
6
2
7
1
8
I OUT 1
Input
ch. 1
Output
ch. 1
Input
ch. 2
Output
ch. 2
+24VDC
+
4-20mA
-
+24VDC
+
4-20mA
-
PLC
C
I OUT 2
24 V
DC
230 V
AC
Technical data
Electrical connections
ACT20M-2CI-2CO-OLP-S
Input
Voltage drop, current input
Input current
Output
Output current
General data
Configuration
Ambient temperature
Accuracy
Temperature coefficient
Typical 2.5 V
4...20 mA
Terminal
4...20 mA
1
2
3
4
5
6
7
8
none
-25 °C...70 °C
< 0.05 % of measuring range
≤± 0.07 µA x (Δ °C x V supply) @ Tamb < 25 °C
, ≤±0.02 µA x (Δ °C x V supply) @ Tamb > 25 °C
100 Hz
30 mW per channel
Output loop powered
≤ 5 ms
Cut-off frequency (-3 dB)
Power consumption, max.
Supply voltage
Step response time
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
Input 1
Output 1
mA
mA
Input 2
Output 2
mA
mA
◻
◼
◻
◼
◼
◻
◼
◻
Electrical connections
ACT20M-CI-CO-OLP-S
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
cULus; DETNORVER; EAC; FMEX; GL; GOSTME25; IECEXKEM;
KEMAATEX
Terminal
1
2
3
4
5
6
7
8
◼=+
◻=–
Input 1
Output 1
mA
mA
◻
◼
◼
◻
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Power supply optionally over the DIN mounting rail CH20M
Ordering data
1-channel version
2-channel version
Type
ACT20M-CI-CO-OLP-S
ACT20M-2CI-2CO-OLP-S
Qty.
1
1
Order No.
1176040000
1176050000
Note
Accessories
Note
2028820000
DIN mounting rail, see Accessories
C.19
Signal converters in 6 mm width
ACT20M
Temperature transducer
ACT20M-RTCI-CO-OLP-S
• Isolation and conversion of temperature signals, (RTD
and thermocouple)
• Configuration via DIP switches
• Power supply via the output circuit
• 2-way isolation
4
3
+
+24VDC
4-20mA
*
* optional external
Cold Junction Compensation (CJC)
4
5
I, U
3
6
OUT
-
6
Input
-
IN
2
7
1
8
PLC
2
C
1
24 V
DC
230 V
AC
Technical data
Input
Sensor
Input measurement range
Temperature input range
Output
Output current
Sensor error detection
General data
Configuration
Supply voltage
Power consumption
Storage temperature
Accuracy
Galvanic isolation
Step response time
Ambient temperature
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
Approvals
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Electrical connections
PT100 / 2-/3-/4-wire, Thermocouple acc. to IEC 584, type: J,
Thermocouple acc. to IEC 584, type: K
PT100 -200…+850 °C, Thermocouple type J -100…+1200°C,
Thermocouple type K -200…+1370°C
Configurable, min. measurement range 10°C (RTD), min. measurement
range 50°C (TC)
adjustable, 4...20 mA, 20…4 mA
3.5 mA ⁄ 23 mA ⁄ none
DIP switch
Output loop powered, 6…35 V
ca. 1 W
-40 °C...85 °C
absolute accuracy: < ±0.05 % of the measurement range, RTD
(PT100) Basic accuracy: < ±0.1 °C of the measurement range, TC
(J,K) Basic accuracy: < ±0.5 °C of the measurement range
2-way isolator
≤ 30 ms, < 300 ms
-25 °C...+70 °C
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
cULus; DETNORVER; EAC; FMEX; GL; IECEXKEM; KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Ordering data
Type
ACT20M-RTCI-CO-OLP-S
Note
Accessories
Note
C.20
+
5
Output
DIN mounting rail, see accessories
Qty.
1
Order No.
1435590000
ACT20M-RTCI-CO-OPL-S
Input
Terminal
RTD
2 wire
3 wire
4 wire
R
R
SenseRR+
SenseRR+
Sense+
1
2
3
4
5
6
7
8
* optional
◼=+
◻=–
Configuration
Output 1
TC
mA
CJC+*
TC-/CJC-*
TC+
CJC-*
◼
◻
Temperature range [°C]
Pt100: -200...+850 °C // TC J: -100...+1200°C // TC K: -180...+1372 °C
Min.
S2
Max.
S2
Max.
S2
Temp. 1 2 3 4 Temp. 5 6 7 8 9 10 Temp. 5 6 7 8 9 10
-200
0
170 ◼
-180
◼ 5
◼ 180 ◼
◼
-150
◼
10
◼
190 ◼
◼
-100
◼ ◼ 15
◼ ◼ 200 ◼
◼◼
-50
◼
20
◼
225 ◼
◼
-25
◼ ◼ 25
◼ ◼ 250 ◼
◼ ◼
-10
◼◼
30
◼◼
275 ◼
◼◼
-5
◼ ◼ ◼ 35
◼ ◼ ◼ 300 ◼
◼◼◼
0 ◼
40
◼
325 ◼ ◼
5 ◼
◼ 45
◼
◼ 350 ◼ ◼
◼
10 ◼ ◼
50
◼ ◼
375 ◼ ◼ ◼
20 ◼ ◼ ◼ 55
◼ ◼ ◼ 400 ◼ ◼ ◼ ◼
25 ◼ ◼
60
◼◼
450 ◼ ◼ ◼
50 ◼ ◼ ◼ 65
◼ ◼ ◼ 500 ◼ ◼ ◼ ◼
100 ◼ ◼ ◼
70
◼◼◼
550 ◼ ◼ ◼ ◼
200 ◼ ◼ ◼ ◼ 75
◼ ◼ ◼ ◼ 600 ◼ ◼ ◼ ◼ ◼
80
◼
650 ◼ ◼
85
◼
◼ 700 ◼ ◼
◼
90
◼
◼
750 ◼ ◼
◼
95
◼
◼ ◼ 800 ◼ ◼
◼◼
100
◼ ◼
850 ◼ ◼ ◼
105
◼ ◼ ◼ 900 ◼ ◼ ◼ ◼
110
◼ ◼◼
950 ◼ ◼ ◼ ◼
115
◼ ◼ ◼ ◼ 1000 ◼ ◼ ◼ ◼ ◼
120
◼◼
1050 ◼ ◼ ◼
125
◼◼
◼ 1100 ◼ ◼ ◼
◼
130
◼ ◼ ◼ 1150 ◼ ◼ ◼ ◼
135
◼ ◼ ◼ ◼ 1200 ◼ ◼ ◼ ◼ ◼
140
◼◼◼
1250 ◼ ◼ ◼ ◼
145
◼ ◼ ◼ ◼ 1300 ◼ ◼ ◼ ◼ ◼
150
◼ ◼ ◼ ◼ 1350 ◼ ◼ ◼ ◼ ◼
160
◼ ◼ ◼ ◼ ◼ 1372 ◼ ◼ ◼ ◼ ◼ ◼
◼ = On
2028820000
Temperature transducer
ACT20M-RTI-CO-EOLP-S
• Conversion of temperature signals, RTD
• Configuration via DIP switches
• Power supply via the output circuit
4
5
+
+24VDC
4-20mA
Output
3
6
-
Input
IN
4
5
I, U
3
6
OUT
2
7
1
8
PLC
2
C
1
24 V
DC
230 V
AC
Technical data
Input
Sensor
Input measurement range
Temperature input range
Output
Output current
Sensor error detection
General data
Configuration
Supply voltage
Power consumption
Storage temperature
Accuracy
Galvanic isolation
Step response time
Ambient temperature
EMC standards
Approvals
Approvals
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Electrical connections
PT100 / 2-/3-/4-wire
PT100 -200…+850 °C
Configurable, min. measurement range 10°C (RTD)
adjustable, 4...20 mA, 20…4 mA
3.5 mA ⁄ 23 mA ⁄ none
DIP switch
Output loop powered, 6…35 V
ca. 1 W
-40 °C...85 °C
absolute accuracy: < ±0.1 % of the measurement range, Basic
accuracy: < ±0.2°C
Without isolation
≤ 30 ms, < 300 ms
-25 °C...+70 °C
IEC 61326-1, NE 21
cULus; DETNORVER; EAC; FMEX; GL; IECEXKEM; KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Type
ACT20M-RTI-CO-EOLP-S
Note
Accessories
2028820000
DIN mounting rail, see accessories
Qty.
1
ACT20M-RTCI-CO-OPL-S
Input
RTD
Terminal
Ordering data
Note
Signal converters in 6 mm width
ACT20M
Order No.
1435610000
1
2
3
4
5
6
7
8
* optional
◼=+
◻=–
Configuration
2 wire
3 wire
4 wire
R
R
SenseRR+
SenseRR+
Sense+
Output 1
mA
◼
◻
Temperature range [°C]
Pt100: -200...+850 °C // TC J: -100...+1200°C // TC K: -180...+1372 °C
Min.
S2
Max.
S2
Max.
S2
Temp. 1 2 3 4 Temp. 5 6 7 8 9 10 Temp. 5 6 7 8 9 10
-200
0
170 ◼
-180
◼ 5
◼ 180 ◼
◼
-150
◼
10
◼
190 ◼
◼
-100
◼ ◼ 15
◼ ◼ 200 ◼
◼◼
-50
◼
20
◼
225 ◼
◼
-25
◼ ◼ 25
◼ ◼ 250 ◼
◼ ◼
-10
◼◼
30
◼◼
275 ◼
◼◼
-5
◼ ◼ ◼ 35
◼ ◼ ◼ 300 ◼
◼◼◼
0 ◼
40
◼
325 ◼ ◼
5 ◼
◼ 45
◼
◼ 350 ◼ ◼
◼
10 ◼ ◼
50
◼ ◼
375 ◼ ◼ ◼
20 ◼ ◼ ◼ 55
◼ ◼ ◼ 400 ◼ ◼ ◼ ◼
25 ◼ ◼
60
◼◼
450 ◼ ◼ ◼
50 ◼ ◼ ◼ 65
◼ ◼ ◼ 500 ◼ ◼ ◼ ◼
100 ◼ ◼ ◼
70
◼◼◼
550 ◼ ◼ ◼ ◼
200 ◼ ◼ ◼ ◼ 75
◼ ◼ ◼ ◼ 600 ◼ ◼ ◼ ◼ ◼
80
◼
650 ◼ ◼
85
◼
◼ 700 ◼ ◼
◼
90
◼
◼
750 ◼ ◼
◼
95
◼
◼ ◼ 800 ◼ ◼
◼◼
100
◼ ◼
850 ◼ ◼ ◼
105
◼ ◼ ◼ 900 ◼ ◼ ◼ ◼
110
◼ ◼◼
950 ◼ ◼ ◼ ◼
115
◼ ◼ ◼ ◼ 1000 ◼ ◼ ◼ ◼ ◼
120
◼◼
1050 ◼ ◼ ◼
125
◼◼
◼ 1100 ◼ ◼ ◼
◼
130
◼ ◼ ◼ 1150 ◼ ◼ ◼ ◼
135
◼ ◼ ◼ ◼ 1200 ◼ ◼ ◼ ◼ ◼
140
◼◼◼
1250 ◼ ◼ ◼ ◼
145
◼ ◼ ◼ ◼ 1300 ◼ ◼ ◼ ◼ ◼
150
◼ ◼ ◼ ◼ 1350 ◼ ◼ ◼ ◼ ◼
160
◼ ◼ ◼ ◼ ◼ 1372 ◼ ◼ ◼ ◼ ◼ ◼
◼ = On
C.21
Signal converters in 6 mm width
ACT20M
Temperature transducer
ACT20M-RTI-AO-S
• Isolation and conversion of temperature signals, RTD
(PT100)
• Configuration via DIP switches
• Power supply via the mounting rail bus
• 3-way isolation
4
5
Output
3
6
+
+
V
mA
-
-
Input
2
7
+
8
-
Supply
1
Supply
4
IN
C
3
2
5
I, U
6
OUT
7
1
82 83
Supply
8
PLC
24 V
DC
230 V
AC
Supply
Technical data
Input
Sensor
Input measurement range
Temperature input range
Output
Output current
Output voltage
load impedance current
load impedance voltage
Sensor error detection
General data
Configuration
Supply voltage
Power consumption
Accuracy
Galvanic isolation
Temperature coefficient
Step response time
Ambient temperature
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
Approvals
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Electrical connections
ACT20M-RTI-AO-S
PT100 / 2-/3-/4-wire
PT100 -200…+850 °C
Configurable, min. measurement range 10°C (RTD)
2 wire
adjustable, 0...20 mA, 4...20 mA
adjustable, 0...5 V, 0...10 V
≤ 600 Ω
≥ 10 kΩ
3.5 mA ⁄ 23 mA ⁄ none
DIP switch
24 V DC ± 30 %
0.7 W
absolute accuracy: < ±0.05 % of the measurement range, Basic
accuracy: < ±0.1°C
3-way isolator
≤0.01 % of the measurement range⁄°C or 0.02 °C ⁄ °C
≤ 30 ms, < 300 ms
-25 °C...+70 °C
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
cULus; DETNORVER; EAC; FMEX; GL; IECEXKEM; KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Ordering data
Type
ACT20M-RTI-AO-S
Note
Accessories
Note
C.22
DIN mounting rail, see accessories
Qty.
1
Input
RTD
Terminal
Order No.
1375510000
1
2
3
4
5
6
7
8
◼=+
◻=–
Configuration
R
R
3 wire
4 wire
Power
supply
Output 1
V
mA
◼
◻
◼
◻
Sense- SenseRRR+
R+
Sense+
◼
◻
Temperature range [°C]
Pt100: -200...+850 °C
Min.
S2
Max.
S2
Max.
S2
Temp. 1 2 3 4 Temp. 5 6 7 8 9 10 Temp. 5 6 7 8 9 10
-200
0
170 ◼
-180
◼ 5
◼ 180 ◼
◼
-150
◼
10
◼
190 ◼
◼
-100
◼ ◼ 15
◼ ◼ 200 ◼
◼◼
-50
◼
20
◼
225 ◼
◼
-25
◼ ◼ 25
◼ ◼ 250 ◼
◼ ◼
-10
◼◼
30
◼◼
275 ◼
◼◼
-5
◼ ◼ ◼ 35
◼ ◼ ◼ 300 ◼
◼◼◼
0 ◼
40
◼
325 ◼ ◼
5 ◼
◼ 45
◼
◼ 350 ◼ ◼
◼
10 ◼ ◼
50
◼ ◼
375 ◼ ◼ ◼
20 ◼ ◼ ◼ 55
◼ ◼ ◼ 400 ◼ ◼ ◼ ◼
25 ◼ ◼
60
◼◼
450 ◼ ◼ ◼
50 ◼ ◼ ◼ 65
◼ ◼ ◼ 500 ◼ ◼ ◼ ◼
100 ◼ ◼ ◼
70
◼◼◼
550 ◼ ◼ ◼ ◼
200 ◼ ◼ ◼ ◼ 75
◼ ◼ ◼ ◼ 600 ◼ ◼ ◼ ◼ ◼
80
◼
650 ◼ ◼
85
◼
◼ 700 ◼ ◼
◼
90
◼
◼
750 ◼ ◼
◼
95
◼
◼ ◼ 800 ◼ ◼
◼◼
100
◼ ◼
850 ◼ ◼ ◼
105
◼ ◼ ◼ 900 ◼ ◼ ◼ ◼
110
◼ ◼◼
950 ◼ ◼ ◼ ◼
115
◼ ◼ ◼ ◼ 1000 ◼ ◼ ◼ ◼ ◼
120
◼◼
1050 ◼ ◼ ◼
125
◼◼
◼ 1100 ◼ ◼ ◼
◼
130
◼ ◼ ◼ 1150 ◼ ◼ ◼ ◼
135
◼ ◼ ◼ ◼ 1200 ◼ ◼ ◼ ◼ ◼
140
◼◼◼
1250 ◼ ◼ ◼ ◼
145
◼ ◼ ◼ ◼ 1300 ◼ ◼ ◼ ◼ ◼
150
◼ ◼ ◼ ◼ 1350 ◼ ◼ ◼ ◼ ◼
160
◼ ◼ ◼ ◼ ◼ 1372 ◼ ◼ ◼ ◼ ◼ ◼
◼ = On
2028820000
Temperature transducer
Signal converters in 6 mm width
ACT20M
ACT-20M-RTI-AO-E-S
• Conversion of temperature signals, RTD (PT100)
• Configuration via DIP switches
4
5
Output
3
6
+
+
V
mA
-
-
Input
2
7
+
8
-
Supply
1
4
IN
3
2
1
5
I, U
6
OUT
7
PLC
24 V
DC
Supply
8
Technical data
Input
Sensor
Input measurement range
Temperature input range
Output
Output current
Output voltage
load impedance current
load impedance voltage
Sensor error detection
General data
Configuration
Supply voltage
Power consumption
Accuracy
Galvanic isolation
Temperature coefficient
Step response time
Ambient temperature
EMC standards
Approvals
Approvals
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Electrical connections
ACT20M-RTI-AO-E-S
PT100 / 2-/3-/4-wire
PT100 -200…+850 °C
Configurable, min. measurement range 10°C (RTD)
2 wire
adjustable, 0...20 mA, 4...20 mA
adjustable, 0...5 V, 0...10 V
≤ 600 Ω
≥ 10 kΩ
3.5 mA ⁄ 23 mA ⁄ none
DIP switch
24 V DC ± 30 %
0.7 W
absolute accuracy: < ±0.1 % of the measurement range
Without isolation
≤0.01 % of the measurement range⁄°C or 0.02 °C ⁄ °C
≤ 30 ms, < 300 ms
-25 °C...+70 °C
IEC 61326-1, NE 21
cULus; DETNORVER; EAC; FMEX; GL; IECEXKEM; KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Type
ACT20M-RTI-AO-E-S
Note
Accessories
2028820000
DIN mounting rail, see accessories
Qty.
1
Input
RTD
Terminal
Ordering data
Note
C
230 V
AC
Order No.
1375520000
1
2
3
4
5
6
7
8
◼=+
◻=–
Configuration
R
R
3 wire
4 wire
Power
supply
Output 1
V
mA
◼
◻
◼
◻
Sense- SenseRRR+
R+
Sense+
◼
◻
Temperature range [°C]
Pt100: -200...+850 °C
Min.
S2
Max.
S2
Max.
S2
Temp. 1 2 3 4 Temp. 5 6 7 8 9 10 Temp. 5 6 7 8 9 10
-200
0
170 ◼
-180
◼ 5
◼ 180 ◼
◼
-150
◼
10
◼
190 ◼
◼
-100
◼ ◼ 15
◼ ◼ 200 ◼
◼◼
-50
◼
20
◼
225 ◼
◼
-25
◼ ◼ 25
◼ ◼ 250 ◼
◼ ◼
-10
◼◼
30
◼◼
275 ◼
◼◼
-5
◼ ◼ ◼ 35
◼ ◼ ◼ 300 ◼
◼◼◼
0 ◼
40
◼
325 ◼ ◼
5 ◼
◼ 45
◼
◼ 350 ◼ ◼
◼
10 ◼ ◼
50
◼ ◼
375 ◼ ◼ ◼
20 ◼ ◼ ◼ 55
◼ ◼ ◼ 400 ◼ ◼ ◼ ◼
25 ◼ ◼
60
◼◼
450 ◼ ◼ ◼
50 ◼ ◼ ◼ 65
◼ ◼ ◼ 500 ◼ ◼ ◼ ◼
100 ◼ ◼ ◼
70
◼◼◼
550 ◼ ◼ ◼ ◼
200 ◼ ◼ ◼ ◼ 75
◼ ◼ ◼ ◼ 600 ◼ ◼ ◼ ◼ ◼
80
◼
650 ◼ ◼
85
◼
◼ 700 ◼ ◼
◼
90
◼
◼
750 ◼ ◼
◼
95
◼
◼ ◼ 800 ◼ ◼
◼◼
100
◼ ◼
850 ◼ ◼ ◼
105
◼ ◼ ◼ 900 ◼ ◼ ◼ ◼
110
◼ ◼◼
950 ◼ ◼ ◼ ◼
115
◼ ◼ ◼ ◼ 1000 ◼ ◼ ◼ ◼ ◼
120
◼◼
1050 ◼ ◼ ◼
125
◼◼
◼ 1100 ◼ ◼ ◼
◼
130
◼ ◼ ◼ 1150 ◼ ◼ ◼ ◼
135
◼ ◼ ◼ ◼ 1200 ◼ ◼ ◼ ◼ ◼
140
◼◼◼
1250 ◼ ◼ ◼ ◼
145
◼ ◼ ◼ ◼ 1300 ◼ ◼ ◼ ◼ ◼
150
◼ ◼ ◼ ◼ 1350 ◼ ◼ ◼ ◼ ◼
160
◼ ◼ ◼ ◼ ◼ 1372 ◼ ◼ ◼ ◼ ◼ ◼
◼ = On
C.23
Signal converters in 6 mm width
ACT20M
Temperature transducer
ACT20M-TCI-AO-S
• Isolation and conversion of temperature signals,
(thermocouple)
• Configuration via DIP switches
• Power supply via the mounting rail bus
• 3-way isolation
4
5
Output
3
+
6
+
+
V
mA
-
-
Input
-
2
7
+
8
-
Supply
*
1
* optional external
Cold Junction Compensation (CJC)
Supply
IN
4
5
I, U
3
6
OUT
2
C
7
1
82 83
8
Supply
PLC
24 V
DC
230 V
AC
Supply
Technical data
Input
Sensor
Input measurement range
Temperature input range
Output
Output current
Output voltage
load impedance current
load impedance voltage
Sensor error detection
General data
Configuration
Supply voltage
Power consumption
Accuracy
Galvanic isolation
Temperature coefficient
Step response time
Ambient temperature
Insulation coordination
Insulation voltage
Rated voltage
EMC standards
Pollution degree
Overvoltage category
Approvals
Approvals
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Electrical connections
Thermocouple (type J, K)
Thermocouple type J -100…+1200°C, Thermocouple type K
-200…+1370°C
Configurable, min. measurement range 50°C (TC)
adjustable, 0...20 mA, 4...20 mA
adjustable, 0...5 V, 0...10 V
≤ 600 Ω
≥ 10 kΩ
3.5 mA ⁄ 23 mA ⁄ none
DIP switch
24 V DC ± 30 %
0.7 W
absolute accuracy: < ±0.05 % of the measurement range, Basic
accuracy: < ±0.5°
3-way isolator
0,1 °C ⁄ °C, or, ≤0,01% des Messbereichs⁄°C
≤ 30 ms, < 300 ms, Configurable
-25 °C...+70 °C
2.5 kVeff / 1 min.
300 Veff
IEC 61326-1, NE 21
2
II
cULus; DETNORVER; EAC; FMEX; GL; IECEXKEM; KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Ordering data
Type
ACT20M-TCI-AO-S
Note
Accessories
Note
C.24
DIN mounting rail, see accessories
Qty.
1
Order No.
1375480000
Terminal
ACT20M-TCI-AO-S
Power
Output 1
supply
V
mA
Input
TC
1
2
3
4
5
6
7
8
CJC+ 1,2)
TC-/CJC- 1,2)
TC+
CJC- 1,2)
1) only
2) optional
◼
◻
◼
◻
◼
◻
◼=+
◻=–
Configuration
Temperature range [°C]
TC J: -100...+1200 °C // TC K: -180...+1372 °C
Min.
S2
Max.
S2
Max.
S2
Temp. 1 2 3 4 Temp. 5 6 7 8 9 10 Temp. 5 6 7 8 9 10
-200
0
170 ◼
-180
◼ 5
◼ 180 ◼
◼
-150
◼
10
◼
190 ◼
◼
-100
◼ ◼ 15
◼ ◼ 200 ◼
◼◼
-50
◼
20
◼
225 ◼
◼
-25
◼ ◼ 25
◼ ◼ 250 ◼
◼ ◼
-10
◼◼
30
◼◼
275 ◼
◼◼
-5
◼ ◼ ◼ 35
◼ ◼ ◼ 300 ◼
◼◼◼
0 ◼
40
◼
325 ◼ ◼
5 ◼
◼ 45
◼
◼ 350 ◼ ◼
◼
10 ◼ ◼
50
◼ ◼
375 ◼ ◼ ◼
20 ◼ ◼ ◼ 55
◼ ◼ ◼ 400 ◼ ◼ ◼ ◼
25 ◼ ◼
60
◼◼
450 ◼ ◼ ◼
50 ◼ ◼ ◼ 65
◼ ◼ ◼ 500 ◼ ◼ ◼ ◼
100 ◼ ◼ ◼
70
◼◼◼
550 ◼ ◼ ◼ ◼
200 ◼ ◼ ◼ ◼ 75
◼ ◼ ◼ ◼ 600 ◼ ◼ ◼ ◼ ◼
80
◼
650 ◼ ◼
85
◼
◼ 700 ◼ ◼
◼
90
◼
◼
750 ◼ ◼
◼
95
◼
◼ ◼ 800 ◼ ◼
◼◼
100
◼ ◼
850 ◼ ◼ ◼
105
◼ ◼ ◼ 900 ◼ ◼ ◼ ◼
110
◼ ◼◼
950 ◼ ◼ ◼ ◼
115
◼ ◼ ◼ ◼ 1000 ◼ ◼ ◼ ◼ ◼
120
◼◼
1050 ◼ ◼ ◼
125
◼◼
◼ 1100 ◼ ◼ ◼
◼
130
◼ ◼ ◼ 1150 ◼ ◼ ◼ ◼
135
◼ ◼ ◼ ◼ 1200 ◼ ◼ ◼ ◼ ◼
140
◼◼◼
1250 ◼ ◼ ◼ ◼
145
◼ ◼ ◼ ◼ 1300 ◼ ◼ ◼ ◼ ◼
150
◼ ◼ ◼ ◼ 1350 ◼ ◼ ◼ ◼ ◼
160
◼ ◼ ◼ ◼ ◼ 1372 ◼ ◼ ◼ ◼ ◼ ◼
◼ = On
2028820000
Temperature transducer
Signal converters in 6 mm width
ACT20M
ACT-20M-TCI-AO-E-S
• Conversion of temperature signals, (thermocouple)
• Configuration via DIP switches
4
5
Output
3
+
6
+
+
V
mA
-
-
Input
-
2
7
+
8
-
Supply
1
IN
4
3
2
1
5
I, U
6
OUT
7
Supply
PLC
24 V
DC
8
Technical data
Input
Sensor
Input measurement range
Temperature input range
Output
Output current
Output voltage
load impedance current
load impedance voltage
Sensor error detection
General data
Configuration
Supply voltage
Power consumption
Accuracy
Galvanic isolation
Temperature coefficient
Step response time
Ambient temperature
EMC standards
Approvals
Approvals
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Electrical connections
Thermocouple (type J, K)
Thermocouple type J -100…+1200°C, Thermocouple type K
-200…+1370°C
Configurable, min. measurement range 50°C (TC)
adjustable, 0...20 mA, 4...20 mA
adjustable, 0...5 V, 0...10 V
≤ 600 Ω
≥ 10 kΩ
3.5 mA ⁄ 23 mA ⁄ none
DIP switch
24 V DC ± 30 %
0.7 W
absolute accuracy: < ±0.1 % of the measurement range, Basic
accuracy: < ±1 °C
Without isolation
0,1 °C ⁄ °C, or, ≤0,01% des Messbereichs⁄°C
≤ 30 ms, < 300 ms, Configurable
-25 °C...+70 °C
IEC 61326-1, NE 21
cULus; DETNORVER; EAC; FMEX; GL; IECEXKEM; KEMAATEX
Screw connection
2.5 / 0.5 / 2.5
114.3 / 6.1 / 112.5
Ordering data
Type
ACT20M-TCI-AO-E-S
Note
Accessories
Note
2028820000
C
230 V
AC
DIN mounting rail, see accessories
Qty.
1
Order No.
1375500000
Terminal
ACT20M-TCI-AO-E-S
Power
Output 1
supply
V
mA
Input
TC
1
2
3
4
5
6
7
8
CJC+ 1,2)
TC-/CJC- 1,2)
TC+
CJC- 1,2)
1) only
2) optional
◼
◻
◼
◻
◼
◻
◼=+
◻=–
Configuration
Temperature range [°C]
TC J: -100...+1200 °C // TC K: -180...+1372 °C
Min.
S2
Max.
S2
Max.
S2
Temp. 1 2 3 4 Temp. 5 6 7 8 9 10 Temp. 5 6 7 8 9 10
-200
0
170 ◼
-180
◼ 5
◼ 180 ◼
◼
-150
◼
10
◼
190 ◼
◼
-100
◼ ◼ 15
◼ ◼ 200 ◼
◼◼
-50
◼
20
◼
225 ◼
◼
-25
◼ ◼ 25
◼ ◼ 250 ◼
◼ ◼
-10
◼◼
30
◼◼
275 ◼
◼◼
-5
◼ ◼ ◼ 35
◼ ◼ ◼ 300 ◼
◼◼◼
0 ◼
40
◼
325 ◼ ◼
5 ◼
◼ 45
◼
◼ 350 ◼ ◼
◼
10 ◼ ◼
50
◼ ◼
375 ◼ ◼ ◼
20 ◼ ◼ ◼ 55
◼ ◼ ◼ 400 ◼ ◼ ◼ ◼
25 ◼ ◼
60
◼◼
450 ◼ ◼ ◼
50 ◼ ◼ ◼ 65
◼ ◼ ◼ 500 ◼ ◼ ◼ ◼
100 ◼ ◼ ◼
70
◼◼◼
550 ◼ ◼ ◼ ◼
200 ◼ ◼ ◼ ◼ 75
◼ ◼ ◼ ◼ 600 ◼ ◼ ◼ ◼ ◼
80
◼
650 ◼ ◼
85
◼
◼ 700 ◼ ◼
◼
90
◼
◼
750 ◼ ◼
◼
95
◼
◼ ◼ 800 ◼ ◼
◼◼
100
◼ ◼
850 ◼ ◼ ◼
105
◼ ◼ ◼ 900 ◼ ◼ ◼ ◼
110
◼ ◼◼
950 ◼ ◼ ◼ ◼
115
◼ ◼ ◼ ◼ 1000 ◼ ◼ ◼ ◼ ◼
120
◼◼
1050 ◼ ◼ ◼
125
◼◼
◼ 1100 ◼ ◼ ◼
◼
130
◼ ◼ ◼ 1150 ◼ ◼ ◼ ◼
135
◼ ◼ ◼ ◼ 1200 ◼ ◼ ◼ ◼ ◼
140
◼◼◼
1250 ◼ ◼ ◼ ◼
145
◼ ◼ ◼ ◼ 1300 ◼ ◼ ◼ ◼ ◼
150
◼ ◼ ◼ ◼ 1350 ◼ ◼ ◼ ◼ ◼
160
◼ ◼ ◼ ◼ ◼ 1372 ◼ ◼ ◼ ◼ ◼ ◼
◼ = On
C.25
Signal converters in 6 mm width
CH20M rail bus
CH20M rail bus
Quick and safe power supply through the DIN rail.
C
This customer-friendly infrastructure solution brings power,
signals and data to the rail in a quick and reliable manner.
The rail bus can replace the tedious individual wiring process
with a flexible and uninterrupted system solution. As a result,
the customer saves time and cost-especially if any module
changes are needed later, as other adjacent modules are
not disturbed. The uninterrupted system bus is securely
integrated within the 35 mm standard mounting rail.
Whether 7.5 mm or 15 mm high, the custom-fit rail profiles
are easy to install on all TS 35 standard rails in accordance
with DIN EN 60715.
The supply of 24 V DC to the power rail can be from any
one of the auxiliary powered ACT20M modules, when that
module is itself externally supplied. This allows the rail to
power up to 8 other modules (approximately 400 mA). For
powering additional ACT20Ms, a separate Feed-In module
can be used.
The ACT20-Feed-In-Basic provides a simple and compact
(6 mm width) power supply interface to the rail, for
supplying up to 2.5 A (up to 50 x ACT20M modules).
The resistant gold-plated contacts ensure a permanent and
reliable contact. The ACT20M modules are simply snapped
onto the mounting rail and are automatically in contact with
the DIN rail bus.
The ACT20-Feed-In-Pro is a more powerful 22.5 mm wide
solution. This takes 2 external 24 V DC inputs, and via
internal diodes provides a redundant supply to the rail, and
an alarm output in the case of input failure.
C.26
2028820000
Signal converters in 6 mm width
CH20M rail bus
Rail bus accessories
CH20M BUS-PROFIL TS35x7.5/1000
CH20M BUS-PROFIL TS35x15/1000
CH20M BUS 4.50/05 AU/1000
Support section for bus circuit board
Support section for bus circuit board
Bus PCB
• Support section for TS 35 x 7.5
• Length: 250, 500 or 750 mm
• Support section for TS 35 x 15
• Length: 250, 500 or 750 mm
• Bus circuit board for use on TS 35 x 7.5
and TS 35 x 15
• Length: 250, 500 or 750 mm
• Five conductor paths, gold-plated
• Electrical rating: 63 V AC, 5 A/conductor path
Ordering data
Type
CH20M BUS-PROFIL TS35x7.5/250
CH20M BUS-PROFIL TS35x7.5/500
CH20M BUS-PROFIL TS35x7.5/750
Qty.
10
10
5
Order No.
1248150000
1248160000
1248170000
Ordering data
Type
CH20M BUS-PROFIL TS35x15/250
CH20M BUS-PROFIL TS35x15/500
CH20M BUS-PROFIL TS35x15/750
Qty.
5
5
5
Order No.
1248180000
1248190000
1248210000
Ordering data
Type
CH20M BUS 4.50/05 AU/250
CH20M BUS 4.50/05 AU/500
CH20M BUS 4.50/05 AU/750
Qty.
10
10
5
CH20M BUS-ADP TS35/1000
CH20M BUS-AP LI TS35x7.5 & 15
CH20M BUS-AP RE TS35x7.5 & 15
Cover plate
End plate
End plate
• Cover plate for DIN rail bus
• Length: 250, 500 or 750 mm
• End plate for DIN rail bus
• Fits on TS 35 x 7.5 and TS 35 x 15
• left
• End plate for DIN rail bus
• Fits on TS 35 x 7.5 and TS 35 x 15
• right
Ordering data
Type
CH20M BUS-ADP TS35/250
CH20M BUS-ADP TS35/500
CH20M BUS-ADP TS35/750
Qty.
10
10
5
Order No.
1248250000
1248260000
1248270000
Ordering data
Type
CH20M BUS-AP LI TS35x7.5 & 15
Qty.
50
Order No.
1193160000
Ordering data
Type
CH20M BUS-AP RE TS35x7.5 & 15
SET CH20M BUS 250MM TS 35X15
SET CH20M BUS 250MM TS 35X7.5
TS 35x7.5 / TS 35x15
Set
Set
DIN rail
• SET consists of one each of
CH20M BUS 4.50/05 AU/250
CH20M BUS-ADP TS 35/250
CH20M BUS-AP LI TS 35X7.5 & 15
CH20M BUS-AP RE TS 35X7.5 & 15
CH20M BUS-PROFIL TS 35X15/250
• SET consists of one each of
CH20M BUS 4.50/05 AU/250
CH20M BUS-ADP TS 35/250
CH20M BUS-AP LI TS 35X7.5 & 15
CH20M BUS-AP RE TS 35X7.5 & 15
CH20M BUS-PROFIL TS 35X7.5/250
• DIN rail with slot
• Passivated galvanised steel
Ordering data
Type
SET CH20M BUS 250MM TS 35X15
2028820000
Qty.
1
Order No.
1335150000
Ordering data
Type
SET CH20M BUS 250MM TS 35X7.5
Qty.
1
Order No.
1335140000
Ordering data
Type
TS 35X7.5/LL 1M/ST/ZN
TS 35X15/LL 1M/ST/ZN
C
Order No.
1248220000
1248230000
1248240000
Qty.
50
Order No.
1193170000
Qty.
10
10
Order No.
0514510000
0236510000
C.27
Signal converters in 6 mm width
CH20M rail bus
Power-feed module for the CH20M DIN rail bus
4 A supply with backup supply and
error analysis
C
The power-feed unit ACT20-FEED-IN-PRO-S supplies
the devices on the CH20M DIN rail bus with 24 V DC.
At the same time, the FEED-IN device reads the group error
contact – optionally provided by the installed devices – from
the CH20M rail bus and sends a message through the
status relay to the external controller. Optionally, two power
supplies can be connected as a primary and back-up, to
create a redundant 24 V DC source. An installation in
Zone 2 / Division 2 is also possible. Three LEDs show the
status of the power supply and the error status.
The FEED-IN-PRO can supply a maximum of 4 A to feed
up to 120 devices mounted on a CH20M rail bus. Quick
identification of errors on the DIN rail bus is through the
internal status relay. The FEED-IN-PRO device immediately
recognises and displays when a power supply has failed.
The supply is then switched automatically to the redundant
power supply.
C.28
Weidmüller offers a compact and narrow 6 mm
feed-in module as an alternative. This feeds the 24 V DC
from it‘s field terminals directly to the to the DIN rail bus. Up
to 80 modules can be fed with a maximum available current
of 2.5 A.
2028820000
ACT20 power-feed module
ACT20-Feed-In-PRO-S
Signal converters in 6 mm width
ACT20 power-feed unit
ACT20-Feed-In-BASIC-S
• Distributes the supply onto the busbar
• Compatible with Weidmüller CH20 DIN rail bus
• Optional connection for backup supply
• Approved for use in Ex-Zone 2 /Div. 2
• Monitoring of the supply voltage
• Alarm alerts via the status relay
Alarm
Power supply, 0 V 51
44 NC
Power supply,+24V 52
Power supply, +24 V
43 Status relay, N.C.
Backup, +24 V 53
42 Status relay, shared
Backup, 0 V 54
41 Status relay, N.O.
C
NC
0V
NC
+24 V
81
NC
82
Status
83
0V
84
+24 V
NC
NC
85
Power supply, 0 V
Technical data
Input
Supply voltage
Input current
Trigger level for the power supply
Output, power supply
Output voltage
Output power
Output current
Output, status relay in safe zone
Max. switching voltage, AC / Max. switching voltage, DC
Continuous current
AC power, max.
General data
Degree of efficiency
Ambient temperature
Power consumption
Protection degree
Weight
Humidity
EMC standards
Approvals
Dimensions
Clamping range (nominal / min. / max.)
Length x width x height
Note
21.6...26.4 V DC
Max. 4 A
21.6...26.4 V DC
Fault < 21 V DC
21.6...26.4 V DC
0.5...2.5 A DC
Input voltage -0.5 V DC / 4 A
96 W
Max. 4 A
Corresponds to the input voltage
250 V / 30 V
2 A AC / DC
500 VA / 60 W
250 V / 30 V
0,976
-20 °C...+60 °C
<2W
IP 20
140
95 %, no condensation
IEC 61326-1, NE 21
cULus; DEKRAATEX; DETNORVER; EAC; FMEX; GOSTME25; IECEXDEK
100 %
-25 °C...+70 °C
Screw connection
2.5 / 0.5 / 2.5
/ 22.5 / 117.2
Screw connection
2.5 / 0.5 / 2.5
/ 6.1 / 112.5
Equivalent to input current
IP 20
70
95 %, no condensation
IEC 61326-1, NE 21
cULus; DETNORVER; EAC; FMEX; GL; GOSTME25; IECEXKEM;
KEMAATEX
Ordering data
Screw connection
Type
ACT20-FEED-IN-PRO-S
Qty.
1
Order No.
8965500000
Type
ACT20-FEED-IN-BASIC-S
Qty.
1
Order No.
1282490000
Note
Accessories
Note
2028820000
DIN mounting rail, see Accessories
DIN mounting rail, see Accessories
C.29
The MCZ-SERIES signal converters have a slim terminal
design and convert, isolate and monitor analogue signals.
They have five tension clamp connections. The open side
of the housing can be closed using a standard cover plate
accessory. The housing has a low height of just 6.3 cm.
It also accommodates a cross-connector for reducing the
wiring of multiple module‘s 24 V and 0 V connections.
Two WS10/6 markers can be used for labelling. These
are available in MultiCard format and can be printed using
Weidmüller‘s professional printing system.
Output
Miscellaneous
8425720000
8483680000
8604420000
8473010000
8473020000
8473000000
8604430000
8411190000
8260280000
8227350000
8461480000
8461470000
C.30
Selection table for analog signal converter MCZ series
MCZ PT100/3 CLP 0...100C
1
X
MCZ PT100/3 CLP 0...120C
1
X
MCZ PT100/3 CLP 0...150C
1
X
MCZ PT100/3 CLP 0...200C
1
X
MCZ PT100/3 CLP 0...300C
1
X
MCZ PT100/3 CLP -50C...+150C 1
X
MCZ PT100/3 CLP -40C...100C 1
X
MCZ CCC 0-20mA/0-20mA
1 X X
MCZ SC 0-10V
1
X
MCZ SC 0-20MA
1 X
MCZ CFC 0-20MA
1 X
MCZ VFC 0-10V
1
X
6
6
6
6
6
6
6
6
6
6
6
6
1
1
1
1
1
1
1
1 X
2
2
1
1
X
X
X
X
X
X
X
X
Special characteristics
output loop
output loop
output loop
output loop
output loop
output loop
output loop
output loop
Limit value transistor output potentiometer 24 V DC
Limit value transistor output potentiometer 24 V DC
24 V DC
Frequency: 0...1/ 4/ 8/ 16 kHz DIP switch
24 V DC
Frequency: 0...1/ 4/ 8/ 16 kHz DIP switch
2-way
2-way
2-way
2-way
2-way
2-way
2-way
2-way
100 2-way
100 2-way
Connection system
Input
Isolation
Product
Amount
0…20mA
4…20mA
0…10V
RTD
Frequency
Sensor feed
Width (mm)
Amount
0…20mA
4…20mA
Order No.
Rated voltage (V)
Selection table
Auxiliary power
C
Signal converter in a terminal format
Configuration
Signal converters in 6 mm width
MCZ-SERIES – Overview
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Z
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
Passive converter OLP
Frequency output configurable
Frequency output configurable
2028820000
Signal converters in 6 mm width
MCZ-SERIES – Overview
Security
U/I
U/I
VC
m
6m
Electrical isolation increases the safety
of operations and reduces the risk of
facility malfunctions.
C
Saves space in the electrical cabinet
High product density (modules only
6 mm wide) reduces space taken on
the DIN rail.
Simple wiring
The power supply can easily be
bridged from one module to the next
using pluggable cross-connections.
DC/DC passive disconnector
PT100 /RTD signal converter
Frequency signal converter
Threshold monitoring
2028820000
C.31
Signal converters in 6 mm width
MCZ SERIES - DC/DC passive isolator
Input current loop feed
MCZ CCC / ILP
• Passive isolators for galvanic isolation of 0/4...20 mA
standard signals.
• The component draws power from the measurement
signal and requires no additional auxiliary power
• Low energy consumption, pick-up current of < 100 µA.
• 2-way isolation
I
C
I
Technical data
/ 0...20 mA current loop
< 100 µA
2.5....3 V at 20 mA
15
12
/ 0...20 mA, 4...20 mA
/ ≤ 500 Ω
< 0.1 % of end value
≤ 50 ppm/K of measured value at 0 Ω load resistance
100 Hz
UE [V]
Input
Input voltage / Input current
Pick-up current
Voltage drop
Output
Output voltage / Output current
Load impedance, voltage/current
Accuracy
Temperature coefficient
Cut-off frequency (-3 dB)
General data
Configuration
Ambient temperature
Approvals
Insulation coordination
Standards
EMC standards
Insulation voltage
9
6
3
0
0
100
200
300
RL [Ω]
400
500
600
none
-25 °C...60 °C
CE; CSA; cURus; EAC
DIN EN 60529, DIN EN 61010-1
EN 61000-6
Tension clamp connection
1.5 / 0.5 / 1.5
63.2 / 6 /
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Ordering data
Tension-clamp connection
Type
MCZ CCC 0-20mA/0-20mA
Qty.
10
Order No.
8411190000
Note
Accessories
Note
C.32
Cross-connectors for power supplies and markers: refer to accessories
2028820000
RTD 2-/3-conductor converter
Output-loop powered
Signal converters in 6 mm width
MCZ-SERIES - PT100 / RTD signal converter
MCZ PT100/3 CLP / OLP
• RTD signal converter for galvanic isolation and
conversion of PT100 signals
• The component draws power from the output circuit and
requires no additional auxiliary power
• 2-way isolation
• F or 2- or 3-conductor PT100 sensors
• O utput current loop feed
PT100
J
U/I
C
VC
Technical data
Input
Sensor
Sensor supply
Output
Output current
Load impedance, voltage/current
General data
Configuration
Ambient temperature / Storage temperature
Accuracy
Approvals
Standards
EMC standards
PT100/2-/3-wire (in compliance with IEC 751)
0.8 mA / 9…30 V DC
4…20 mA (current loop) at 9…30V DC
/ ≤ 600 Ω
none
/ -25 °C...50 °C / -25 °C...85 °C
Typical 0.2%, max. 0.5% of FSR
CE; CSA; cURus; EAC
DIN EN 50178, DIN EN 61000-4-2
EN 61000-6
Tension clamp connection
1.5 / 0.5 / 1.5
63.2 / 6 /
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
Ordering data
-40...+100 °C
-50...+150 °C
0...100 °C
0...120 °C
0...150 °C
0...200 °C
0...300 °C
Note
Tension-clamp connection
Tension-clamp connection
Tension-clamp connection
Tension-clamp connection
Tension-clamp connection
Tension-clamp connection
Tension-clamp connection
Type
MCZ PT100/3 CLP -40C...100C
MCZ PT100/3 CLP -50C...+150C
MCZ PT100/3 CLP 0...100C
MCZ PT100/3 CLP 0...120C
MCZ PT100/3 CLP 0...150C
MCZ PT100/3 CLP 0...200C
MCZ PT100/3 CLP 0...300C
Qty.
10
10
10
10
10
10
10
Order No.
8604430000
8473000000
8425720000
8483680000
8604420000
8473010000
8473020000
Accessories
Note
2028820000
Cross-connectors for power supplies and markers: refer to accessories
C.33
Signal converters in 6 mm width
MCZ SERIES - Frequency signal isolator
DC/f converter
MCZ VFC
MCZ CFC
The analogue input signal is converted into a configurable
frequency signal. Thus analogue signals can be read by the
PLC‘s counter inputs.
Vcc
4
+24V
U/I
I
C
Output
5
3 GND
f
f f/2f/4f/16
Input
f
Vcc
5
+24V
1
0...10V
OV
Output
5
2
U
16kHz
3 GND
f
f f/2f/4f/16
Input
1
0...20mA
OV
2
f
I
16kHz
Technical data
Input
Input voltage / Input current
Input resistance, voltage/current
Voltage drop
Output
Output frequency
Output level
Output current
Accuracy
Temperature coefficient
Status indicator
General data
Configuration
Supply voltage
Current consumption
Current-carrying capacity of cross-connect.
Ambient temperature
Approvals
Insulation coordination
Standards
EMC standards
Rated voltage
Impulse withstand voltage
Insulation voltage
Overvoltage category
Pollution degree
Clearance & creepage distances
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
0...10 V /
100 kΩ /
/ 0...20 mA
/ 50 Ω
1 V at 20 mA
0...1/ 4/ 8/ 16 kHz
PNP, Ub-0.7 V
max. 20 mA
0.2% of FSR
≤ 250 ppm/K
LED, pulsing
0...1/ 4/ 8/ 16 kHz
PNP, Ub-0.7 V
max. 20 mA
0.2% of FSR
≤ 250 ppm/K
LED, pulsing
DIP switch
24 V DC ± 10 %
14 mA without load
≤ 20 A
0 °C...50 °C
CE; EAC
DIP switch
24 V DC ± 10 %
14 mA without load
≤ 20 A
0 °C...50 °C
CE; EAC
DIN EN 50178
EN 55011, EN 61000-6
100 V
1.5 kV
1 kV DC
III
2
≥ 1.5 mm
DIN EN 50178
EN 55011, EN 61000-6
100 V
1.5 kV
1 kV DC
III
2
≥ 1.5 mm
Tension clamp connection
1.5 / 0.5 / 1.5
63.2 / 6 /
Tension clamp connection
1.5 / 0.5 / 1.5
63.2 / 6 /
Ordering data
Tension-clamp connection
Type
MCZ VFC 0-10V
Qty.
10
Order No.
8461470000
Type
MCZ CFC 0-20MA
Qty.
10
Order No.
8461480000
Note
Accessories
Note
C.34
Cross-connectors for power supplies and markers: refer to accessories
Cross-connectors for power supplies and markers: refer to accessories
2028820000
Transistor output
MCZ SC 0...10 V
Signal converters in 6 mm width
MCZ SERIES - Threshold monitoring
MCZ SC 0...20 mA
• 2 digital outputs
• Monitoring of upper and lower limit values
• 3 selectable input ranges: 300 mV...10 V, 30 mV...1 V,
10 mV...100 mV
4
U/I
Output1
max.50mA
5
VC
Output2
max.50mA
3
P1
Th1
P2
Th2
4
2
OV
Vcc
+24V
Output1
max.50mA
Input
0-10V
1
5
2
OV
3 Vcc
+24V
P1
Th1
P2
Th2
Input
0...20mA
1
Output2
max.50mA
C
Technical data
Input
Input voltage / Input current
Input resistance, voltage/current
Voltage drop
Output
Contact assembly
Function
Switching thresholds
Hysteresis
Switching current
Step response time
Cut-off frequency (-3 dB)
Temperature coefficient
General data
Configuration
Supply voltage
Ambient temperature
Approvals
Insulation coordination
Standards
EMC standards
Dimensions
Clamping range (nominal / min. / max.)
Depth x width x height
Note
0...10 V /
60 kΩ /
/ 0.5...20 mA
/ 50 Ω
1V
double switch output PNP
UIN<UTH1: output 1 active / UIN>UTH2: output 2 active
Via 2 potentiometers (12 turns)
1% of adjusted final value
50 mA - per channel (voltage drop at
transistor: < 1.2 V at 50 mA)
< 250 µs (switching threshold at 90% of
max. input signal; RI ≤ 1 kΩ)
100 Hz
max. 250 ppm/K
double switch output PNP
IIN<ITH1: Output 1 active / IIN>ITH2: Output 2 active
Via 2 potentiometers (12 turns)
1% of adjusted final value
50 mA - per channel (voltage drop at
transistor: < 1.2 V at 50 mA)
< 250 µs (switching threshold at 90% of
max. input signal; RI ≤ 1 kΩ)
100 Hz
max. 250 ppm/K
Potentiometer
24 V DC ± 20 %
0 °C...50 °C
CE; CSA; cURus; EAC
Potentiometer
24 V DC ± 20 %
0 °C...50 °C
CE; CSA; cURus; EAC
DIN EN 50178
EN 55011, EN 61000-6
DIN EN 50178
EN 55011, EN 61000-6
Tension clamp connection
1.5 / 0.5 / 1.5
63.2 / 6 /
Tension clamp connection
1.5 / 0.5 / 1.5
63.2 / 6 /
Ordering data
Tension-clamp connection
Type
MCZ SC 0-10V
Qty.
10
Order No.
8260280000
Type
MCZ SC 0-20MA
Qty.
10
Order No.
8227350000
Note
Accessories
Note
2028820000
Cross-connectors for power supplies and markers: refer to accessories
Cross-connectors for power supplies and markers: refer to accessories
C.35
C
C.36
2028820000
Signal converters in 6 mm width