FF-2142-6.3 This filter has been designed to operate with the VICOR (HAM) Harmonic Attenuator Module. The combination is designed to meet the conducted emissions requirements of EN 55015. The filter will also function very well with most other fixed frequency switching power supplies. Order P/N: FF-2142-6.3 Operating Voltage = _________________ DC—250 Vac Operating Current (Max)= ____________________ 6.3A INSERTION LOSS vs. FREQUENCY Frequency = _________________ 50/60 HZ @ 250 Vac = ___________________ 400 Hz @ 120 Vac Temp. Range (Storage) = ______________-25°—100°C Temp. Range (Operating) (-13)@ 13.0 A = _ -25°—60ºC (See temp graph) Diel. Withstanding (Ph—Case) = __ 1500 Vac; For 1 Min Diel. Withstanding (Ph—Ph) = ____ 1500 Vdc; For 1 Min Leakage Current @ 250 Vac, 60 HZ = ____ 0.5 MA max. Discharge Voltage after 3 sec = ___________ 20 V max. Weight = _______________________________ 2.5 Lbs DCR = _________________________0.85 Ohm; ea. leg USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884 EUR JMK Inc Glasgow G13 1DN Scotland UK FF-2142-6.3 Conducted Emission Test Results: Specification EN55015 Input Voltage: 220 V Frequency: 60 Hz Input Current: 6.3 amp Output Power: ~600 Watt Temperature: 23°C Comments: The “worst case” emissions occurred full load. The results for both the Primary line and the Neutral line were similar. OPERATING CURRENT vs. AMBIENT TEMPERATURE USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884 EUR JMK Inc Glasgow G13 1DN Scotland UK