HH-1355-6.3 The HH-1355-6.3 filter has been designed to operate with the VICOR Harmonic Attenuator Module (HAM) and other associated power converters to meet Mil-Std461C,D, E & F. It will be necessary to add transient protection across the output of the filter to protect the HAM module. It is also recommended that you use 5%, bipolar TVS diodes. 2 x 130V and 1 x 150V diodes connected in series. Order P/N: HH-1355-6.3 (-20—40ºC) HH-1355-6.3HT (-40—55ºC) HH-1355-6.3BHT (-40—70ºC) HH-1355-6.3CHT (-55—70ºC) Operating Voltage = ___________________ 85 to 250 V Operating Current = ______________________6.3 Amp Operating Frequency = __________________50/400 Hz Operating Temperature, High = ______See Temp Curve Operating Temperature, Low = _______________ -20ºC = ______ -40ºC, HT & BHT = ___________-55ºC, CHT INSERTION LOSS vs. FREQUENCY Diel. Withstanding (line - case) = ___________1500 Vac Diel. Withstanding (line - line) = ____________1500 Vdc Leakage Current = ___________2.5 ma @ 220 V, 60 Hz Max Residual Voltage after 1 sec = __________34 Volts Calculated MTBF = ________2,142,107 Hrs @ 30°C GB 4-40 INSERT .25 DP (4 PL) .080 DIA PIN (6 PL) 4.60 0.25 0.94 2.50 LINE 2.40 2.00 0.20 LOAD 0.30 0.50 1.46 1.80 0.50 2.80 0.06 0.13 ±0.02 USA JMK Inc 15 Caldwell Dr. Amherst, NH 03031 PH: 603 886-4100 FX: 603 886-4115 email: [email protected] PH: 44-(0) 7785310729 Fax: 44-(0) 141 589 1884 EUR JMK Inc Glasgow G13 1DN Scotland UK