Analog Devices Welcomes Hittite Microwave Corporation NO CONTENT ON THE ATTACHED DOCUMENT HAS CHANGED www.analog.com www.hittite.com THIS PAGE INTENTIONALLY LEFT BLANK HMC1084LC4 v00.0313 SWITCHES - SP4T - SMT GaAs MMIC SP4T REFLECTIVE SWITCH 23 - 30 GHz Typical Applications Features The HMC1084LC4 is ideal for: Broadband Performance: 23 - 30 GHz • Telecom Infrastructure High Isolation: 26 dB • Microwave Radio & VSAT Insertion Loss: 2.8 dB • Military & Space Hybrids High Power Handling: >27 dBm • Test Instrumentation 24 Lead 4x4mm SMT Package: 16mm² • SATCOM & Sensors Functional Diagram General Description The HMC1084LC4 is a broadband reflective GaAs MESFET SP4T switch in a compact 4x4 mm ceramic package. Covering 23 - 30 GHz, this switch offers high isolation and low insertion loss. The HMC1084LC4 is controlled with 0/-3V logic, exhibits fast switching speed and consumes much less DC current than pin diode based solutions. With its compact form factor, the HMC1084LC4 is ideal for microwave radio as well as SATCOM and sensor applications. The HMC1084LC4 is housed in a leadless 4x4 mm SMT package which is compatible with surface mount manufacturing techniques. Electrical Specifications, TA = +25° C, With 0/-3V Control, 50 Ohm System Parameter Frequency Typ. Max. Units 23 - 26 GHz 3.2 3.6 3.6 3.8 3.9 4.3 4.3 4.5 dB dB dB dB (RFC to RF1) (RFC to RF2) (RFC to RF3) (RFC to RF4) 26 - 30 GHz 2.8 2.8 2.8 3.3 3.5 3.5 3.4 4.0 dB dB dB dB (RFC to RF1, RF4) 23 - 30 GHz 21 26 21 26 Insertion Loss (RFC to RF1) (RFC to RF2) (RFC to RF3) (RFC to RF4) Insertion Loss Isolation Isolation (RFC to RF2, RF3) 23 - 30 GHz Return Loss [1] “On State” 23 - 30 GHz Loss [2] “Off State” Return Min. dB 11 dB 23 - 30 GHz 6 dB Input Third Order Intercept (Two-Tone Input Power= 10 dBm Each Tone) 23 - 25 GHz 25 - 30 GHz 47 43 dBm Switching Characteristics tRISE, tFALL (10/90% RF) tON, tOFF (50% CTL to 10/90% RF) 23 - 30 GHz 23- 30 GHz 15 53 ns ns [1] Return loss with switch path in insertion loss state. [2] Return loss with switch path in isolation state. 1 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC1084LC4 v00.0313 GaAs MMIC SP4T REFLECTIVE SWITCH 23 - 30 GHz 0 0 -1 -1 -2 -3 -4 -5 -2 -3 -4 -5 -6 -6 23 24 25 26 27 28 29 30 23 24 25 +25 C +85 C +25 C -40 C 27 28 29 30 +85 C -40 C Insertion Loss RFIN to RF3 vs. Temperature 0 0 -1 -1 INSERTION LOSS (dB) INSERTION LOSS (dB) Insertion Loss RFIN to RF2 vs. Temperature -2 -3 -4 -5 -2 -3 -4 -5 -6 -6 23 24 25 26 27 28 29 30 23 24 25 FREQUENCY (GHz) +25 C 26 27 28 29 30 FREQUENCY (GHz) +85 C -40 C Isolation, Worst Case +25 C +85 C -40 C Return Loss On State [1] 0 0 -5 RETURN LOSS (dB) -10 ISOLATION (dB) 26 FREQUENCY (GHz) FREQUENCY (GHz) SWITCHES - SP4T - SMT Insertion Loss RFIN to RF4 vs. Temperature INSERTION LOSS (dB) INSERTION LOSS (dB) Insertion Loss RFIN to RF1 vs. Temperature -20 -30 -40 -10 -15 -20 -25 -30 -50 -35 -60 -40 23 24 25 26 27 28 29 30 23 24 25 FREQUENCY (GHz) RF1 RF2 26 27 28 29 30 FREQUENCY (GHz) RF3 RF4 RFC RF1 RF2 RF3 RF4 [1] Return loss with switch path in insertion loss state. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 2 HMC1084LC4 v00.0313 GaAs MMIC SP4T REFLECTIVE SWITCH 23 - 30 GHz Insertion Loss vs. Input Power Return Loss Off State [1] 0 -5 -1 -10 INSERTION LOSS (dB) RETURN LOSS (dB) SWITCHES - SP4T - SMT 0 -15 -20 -25 -30 -2 -3 -4 -5 -35 -6 -40 23 24 25 26 27 28 29 0 30 3 6 9 RFC RF1 12 15 18 21 24 27 INPUT POWER (dBm) FREQUENCY (GHz) RF2 RF3 25GHz 26GHz RF4 27GHz 28GHz 29GHz 30GHz Input IP3 vs. Temperature @ 10dBm/tone 55 50 IP3 (dBm) 45 40 35 30 25 20 23 24 25 26 27 28 29 30 FREQUENCY (GHz) +25 C +85 C -40 C [1] Return loss with switch path in isolation state. 3 For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC1084LC4 v00.0313 GaAs MMIC SP4T REFLECTIVE SWITCH 23 - 30 GHz Control Voltage Range (VC1, VC2, VC3, VC4) +5V Maximum Input Power 30 dBm Channel Temperature 175 °C Thermal Resistance Channel to die bottom (Insertion Loss Path) 24 °C/W Storage Temperature -65 to +150 °C Operating Temperature -55 to +85 °C ESD Sensitivity (HBM) Class1A Bias Voltage & Current VC (V) IC (µA) VC1 = -3V IC1 < 10 µA VC2 = -3V IC2 < 10 µA VC3 = -3V IC3 < 10 µA VC4 = -3V IC4 < 10 µA Truth Table ELECTROSTATIC SENSITIVE DEVICE OBSERVE HANDLING PRECAUTIONS VC1 VC2 VC3 VC4 -3V 0V 0V 0V RFIN to: RF1 0V -3V 0V 0V RF2 0V 0V -3V 0V RF3 0V 0V 0V -3V RF4 Control Voltages State Bias Condition Low +1V to -0.25V High -2.75V to -5V, < 10 µA SWITCHES - SP4T - SMT Absolute Maximum Ratings Outline Drawing NOTES: 1. PACKAGE BODY MATERIAL: ALUMINA 2. LEAD AND GROUND PADDLE PLATING: 30-80 MICROINCHES GOLD OVER 50 MICROINCHES MINIMUM NICKEL. 3. DIMENSIONS ARE IN INCHES [MILLIMETERS]. 4. LEAD SPACING TOLERANCE IS NON-CUMULATIVE 5. PACKAGE WARP SHALL NOT EXCEED 0.05mm DATUM -C6. ALL GROUND LEADS AND GROUND PADDLE MUST BE SOLDERED TO PCB RF GROUND. 7. CLASSIFIED AS MOISTURE SENSITIVITY LEVEL (MSL) 1. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 4 HMC1084LC4 v00.0313 GaAs MMIC SP4T REFLECTIVE SWITCH 23 - 30 GHz Pin Descriptions SWITCHES - SP4T - SMT Pin Number Function Description 1, 2, 6, 8, 23 N/C These pins are not connected internally; however, all data shown herein was measured with these pins connected to RF/DC ground externally 3, 5, 9, 11, 13, 15, 16, 18, 20, 22 GND These pins and the exposed ground paddle must be connected to RF/DC ground. 4, 10, 14, 17, 21 RFIN, RF1, RF2, RF3, RF4 These pins are DC coupled (to GND) and matched to 50 Ohms 7, 12, 19, 24 VC1, VC2, VC3, VC4 See Truth Table Interface Schematic Evaluation PCB List of Materials for Evaluation PCB EVAL01-HMC1084LC4[1] Item Description J1 - J5 PCB Mount K connector C6 - C9 1000pF Capacitor, 0402 Pkg. U1 HMC1084LC4, Switch PCB [2] 600-00698-00, Evaluation PCB [1] Reference this number when ordering complete evaluation PCB [2] Circuit Board Material: Rogers 4350 or Arlon FR4 5 The circuit board used in the application should use RF circuit design techniques. Signal lines should have 50 Ohm impedance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. A sufficient number of via holes should be used to connect the top and bottom ground planes. The evaluation board should be mounted to an appropriate heat sink. The evaluation circuit board shown is available from Hittite upon request. For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] HMC1084LC4 v00.0313 GaAs MMIC SP4T REFLECTIVE SWITCH 23 - 30 GHz SWITCHES - SP4T - SMT Notes: For price, delivery and to place orders: Hittite Microwave Corporation, 2 Elizabeth Drive, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373 Order On-line at www.hittite.com Application Support: Phone: 978-250-3343 or [email protected] 6