VS-MURD620CTHM3 www.vishay.com Vishay Semiconductors Ultrafast Rectifier, 2 x 3 A FRED Pt® FEATURES Base common cathode 4 • Ultrafast recovery time • Low forward voltage drop • Low leakage current • 175 °C operating junction temperature • AEC-Q101 qualified 2 Common cathode 1 3 Anode Anode TO-252AA (D-PAK) • Meets JESD 201 class 2 whisker test • Meets MSL level 1, per LF maximum peak of 260 °C J-STD-020, • Material categorization: for definitions of compliance please see www.vishay.com/doc?99912 DESCRIPTION / APPLICATIONS PRODUCT SUMMARY Package TO-252AA (D-PAK) IF(AV) 2x3A VR 200 V VF at IF 0.96 V trr typ. See Recovery table TJ max. 175 °C Diode variation Common cathode VS-MURD620CTHM3 is the state of the art ultrafast recovery rectifier specifically designed with optimized performance of forward voltage drop and ultrafast recovery time. The planar structure and the platinum doped life time control, guarantee the best overall performance, ruggedness and reliability characteristics. These devices are intended for use in the output rectification stage of SMPS, UPS, DC/DC converters as well as freewheeling diode in low voltage inverters and chopper motor drives. Their extremely optimized stored charge and low recovery current minimize the switching losses and reduce over dissipation in the switching element and snubbers. ABSOLUTE MAXIMUM RATINGS PARAMETER SYMBOL Peak repetitive reverse voltage VRRM Average rectified forward current per device IF(AV) Non-repetitive peak surge current IFSM Peak repetitive forward current per diode IFM Operating junction and storage temperatures TEST CONDITIONS Total device, rated VR, TC = 146 °C MAX. UNITS 200 V 6 A 50 Rated VR, square wave, 20 kHz, TC = 146 °C 6 TJ, TStg -65 to +175 °C ELECTRICAL SPECIFICATIONS (TJ = 25 °C unless otherwise specified) PARAMETER Breakdown voltage, blocking voltage Forward voltage SYMBOL VBR, VR VF TEST CONDITIONS MIN. TYP. MAX. 200 - - IF = 3 A - - 1.0 IF = 3 A, TJ = 125 °C - - 0.96 IF = 6 A - - 1.2 1.13 IR = 100 μA IF = 6 A, TJ = 125 °C - - VR = VR rated - - 5 TJ = 125 °C, VR = VR rated - - 250 UNITS V Reverse leakage current IR Junction capacitance CT VR = 200 V - 12 - pF Series inductance LS Measured lead to lead 5 mm from package body - 8.0 - nH μA Revision: 10-Jul-15 Document Number: 94742 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MURD620CTHM3 www.vishay.com Vishay Semiconductors DYNAMIC RECOVERY CHARACTERISTICS (TJ = 25 °C unless otherwise specified) PARAMETER Reverse recovery time Peak recovery current SYMBOL trr IRRM TEST CONDITIONS MIN. TYP. MAX. IF = 1.0 A, dIF/dt = 50 A/μs, VR = 30 V - 20 35 TJ = 25 °C - 19 - TJ = 125 °C - 26 - TJ = 25 °C TJ = 125 °C IF = 3 A dIF/dt = 200 A/μs VR = 160 V - 3.1 - - 4.6 - UNITS ns A TJ = 25 °C - 30 - TJ = 125 °C - 60 - MIN. TYP. MAX. UNITS TJ, TStg -65 - 175 °C Thermal resistance, junction to case per leg RthJC - - 9.0 Thermal resistance, junction to ambient per leg RthJA - - 80 Thermal resistance, case to heatsink RthCS - - - - 0.3 - - 0.01 - oz. - 12 (10) kgf · cm (lbf · in) Reverse recovery charge Qrr nC THERMAL - MECHANICAL SPECIFICATIONS PARAMETER Maximum junction and storage temperature range SYMBOL TEST CONDITIONS Mounting surface, flat, smooth and greased Weight 6.0 (5.0) Mounting torque Marking device Case style TO-252AA (D-PAK) °C/W g MURD620CTH Revision: 10-Jul-15 Document Number: 94742 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MURD620CTHM3 Vishay Semiconductors 100 100 10 TJ = 175 °C TJ = 150 °C TJ = 25 °C 1 TJ = 175 °C IR - Reverse Current (µA) IF - Instantaneous Forward Current (A) www.vishay.com 10 TJ = 150 °C TJ = 125 °C 1 TJ = 100 °C 0.1 TJ = 25 °C 0.01 0.001 0.1 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 50 0 1.6 100 200 150 VF - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Typical Forward Voltage Drop Characteristics Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage CT - Junction Capacitance (pF) 100 TJ = 25 °C 10 1 10 100 1000 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (°C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage 10 1 PDM 0.1 Single pulse (thermal resistance) 0.01 0.00001 0.0001 D = 0.50 D = 0.20 D = 0.10 D = 0.05 D = 0.02 D = 0.01 0.001 t1 t2 Notes: 1. Duty factor D = t1/t2 . 2. Peak TJ = PDM x ZthJC + TC 0.01 0.1 . 1 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics Revision: 10-Jul-15 Document Number: 94742 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MURD620CTHM3 www.vishay.com Vishay Semiconductors 50 40 IF = 3 A IF = 6 A 160 DC 150 Square wave (D = 0.50) Rated VR applied 140 30 20 130 See note (1) 10 100 120 0 1 2 3 4 5 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current Fig. 7 - Typical Reverse Recovery Time vs. dIF/dt 4.5 140 4.0 120 3.5 VR = 30 V TJ = 125 °C TJ = 25 °C 100 3.0 RMS limit 2.5 Qrr (nC) Average Power Loss (W) VR = 30 V TJ = 125 °C TJ = 25 °C 170 trr (ns) Allowable Case Temperature (°C) 180 D = 0.01 D = 0.02 D = 0.05 D = 0.10 D = 0.20 D = 0.50 2.0 1.5 1.0 DC 0.5 1 2 3 4 80 60 40 20 0 0 IF = 6 A IF = 3 A 5 0 100 1000 IF(AV) - Average Forward Current (A) dIF/dt (A/µs) Fig. 6 - Forward Power Loss Characteristics Fig. 8 - Typical Stored Charge vs. dIF/dt Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = Rated VR (1) Revision: 10-Jul-15 Document Number: 94742 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MURD620CTHM3 www.vishay.com Vishay Semiconductors VR = 200 V 0.01 Ω L = 70 μH D.U.T. dIF/dt adjust D IRFP250 G S Fig. 9 - Reverse Recovery Parameter Test Circuit (3) trr IF ta tb 0 Qrr (2) IRRM (4) 0.5 IRRM dI(rec)M/dt (5) 0.75 IRRM (1) dIF/dt (1) dIF/dt - rate of change of current through zero crossing (2) IRRM - peak reverse recovery current (3) trr - reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current. (4) Qrr - area under curve defined by trr and IRRM Qrr = trr x IRRM 2 (5) dI(rec)M/dt - peak rate of change of current during tb portion of trr Fig. 10 - Reverse Recovery Waveform and Definitions Revision: 10-Jul-15 Document Number: 94742 5 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 VS-MURD620CTHM3 www.vishay.com Vishay Semiconductors ORDERING INFORMATION TABLE Device code VS- MUR 1 D 6 20 CT TRL H M3 3 4 5 6 7 8 9 2 1 - Vishay Semiconductors product 2 - Ultrafast MUR series 3 - D = D-PAK 4 - Current rating (6 = 6 A) 5 - Voltage rating (20 = 200 V) 6 - CT = center tap (dual) TR = tape and reel TRL = tape and reel (left oriented) TRR = tape and reel (right oriented) 7 - Tape and reel suffix 8 - H = AEC-Q101 qualified 9 - Environmental digit: M3 = halogen-free, RoHS-compliant, and terminations lead (Pb)-free ORDERING INFORMATION (Example) PREFERRED P/N QUANTITY PER T/R MINIMUM ORDER QUANTITY PACKAGING DESCRIPTION 75 3000 Antistatic plastic tube VS-MURD620CTTRHM3 2000 2000 13" diameter reel VS-MURD620CTTRLHM3 3000 3000 13" diameter reel VS-MURD620CTTRRHM3 3000 3000 13" diameter reel VS-MURD620CTHM3 LINKS TO RELATED DOCUMENTS Dimensions www.vishay.com/doc?95519 Part marking information www.vishay.com/doc?95518 Packaging information www.vishay.com/doc?95033 Revision: 10-Jul-15 Document Number: 94742 6 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000