Supertex inc. HV57708 32MHz, 64-Channel Serial to Parallel Converter with Push-Pull Outputs Features current sourcing and sinking capability such as driving plasma panels, vacuum fluorescent displays, or large matrix LCD displays. ►► HVCMOS® technology ►► 5.0V CMS Logic ►► Output voltage up to +80V ►► Low power level shifting ►► 32MHz equivalent data rate ►► Latched data outputs ►► Foreward and reverse shifting options (DIR pin) ►► Diode to VPP allows efficient power recovery ►► Outputs may be hot switched General Description The HV57708 is a low voltage serial to high voltage parallel converter with push-pull outputs. The device has been designed for use as a driver for EL displays. It can also be used in any application requiring multiple output high voltage The device has 4 parallel 16-bit registers, permitting data rates 4x the speed of one (they are clocked together). There are also 64 latches and control logic to perform the polarity select and blanking of the outputs. HVOUT1 is connected to the first stage of the first shift register through the polarity and blanking logic. Data is shifted through the shift registers on the logic low to high transition of the clock. The DIR pin causes CCW shifting when connected to GND, and CW shifting when connected to VDD. A data output buffer is provided for cascading devices. This output reflects the current status of the last bit of the shift register (HVOUT64). Operation of the shift register is not affected by the LE (latch enable), BL (blanking), or the POL (polarity) inputs. Transfer of data from the shift registers to the latches occurs when the LE input is high. The data in the latches is stored when the LE is low. Functional Block Diagram DO1 DI4 DO2 DI3 DO3 DI2 DO4 DI1 VDD LE BL POL VPP HVOUT1 5 9 • • • HVOUT61 DIR SR1 HVOUT2 6 10 • • • HVOUT62 SR2 CLK HVOUT3 7 11 • • • HVOUT63 SR3 HVOUT4 8 12 • • • HVOUT64 SR4 DO4 DI1 DO3 DI2 DO2 DI3 DO1 DI4 GND Note: Each SR (shift register) provides 16 outputs. SR1 supplies every fourth output starting with 1; SR2 supplies every fourth output with 2, etc. Doc.# DSFP-HV57708 A061913 Supertex inc. www.supertex.com HV57708 Ordering Information Pin Configuration Part Number Package Option Packing HV57708PG-G 80-Lead PQFP 66/Tray -G denotes a lead (Pb)-free / RoHS compliant package Absolute Maximum Ratings Parameter Value Supply voltage, VDD -0.5V to +7.5V Output voltage , VPP -0.5V to +90V Logic input levels 80 1 -0.3V to VDD +0.3V Ground current1 1.5A Continuous total power dissipation2 Operating temperature range Storage temperature range 1200mW 80-Lead PQFP Product Marking -40°C to +85°C L = Lot Number YY = Year Sealed WW = Week Sealed C = Country of Origin A = Assembler ID = “Green” Packaging HV57708PG -65°C to +150°C LLLLLLLLLL YYWW CCCCCCCC AAA Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these conditions is not implied. Continuous operation of the device at the absolute rating level may affect device reliability. All voltages are referenced to device ground. Package may or may not include the following marks: Si or Notes: 1. Limited by the total power dissipated in the package. 2. For operation above 25°C ambient derate linearly to maximum operating temperature at 20mW/°C. 80-Lead PQFP Typical Thermal Resistance Package θja 80-Lead PQFP 37OC/W Recommended Operating Conditions Sym Parameter Min Max Units VDD Logic supply voltage 4.5 5.5 V VPP Output voltage 8.0 80 V VIH High-level input voltage VDD -0.5V - V VIL Low-level input voltage 0 0.5 V fCLK Clock frequency per register - 8.0 MHz TA Operating free-air temperature -40 +85 °C Notes: Power-up sequence should be the following: 1. Apply ground. 2. Apply VDD. 3. Set all inputs (DIN, CLK, Enable, etc.) to a known state. 4. Apply VPP. 5. The VPP should not drop below VDD or float during operation. Power-down sequence should be the reverse of the above. Doc.# DSFP-HV57708 A061913 2 Supertex inc. www.supertex.com HV57708 DC Electrical Characteristics (Over recommended operating conditions unless otherwise noted) Sym Parameter Min Max Units Conditions - 15 mA VDD = VDD max, fCLK = 8.0MHz - 100 µA Outputs high - 100 µA Outputs low - 100 µA All VIN = VDD 65 - V IO = -15mA, VPP = +80V VDD -0.5 - V IO = -100µA HVOUT - 7.0 V IO = 12mA, VPP = +80V Data out - 0.5 V IO = 100µA IDD VDD supply current IPP High voltage supply current IDDQ Quiescent VDD supply current VOH High level output VOL Low level output IIH High-level logic input current - 1.0 µA VIH = VDD IIL Low-level logic input current - -1.0 µA VIL = 0V High voltage clamp diode - 1.0 V IOC = 1.0mA VOC HVOUT Data out AC Electrical Characteristics (T A Sym Min Max Units Conditions - 8.0 MHz Per register Clock width high or low 62 - ns --- tSU Data set-up time before clock rises 10 - ns --- tH Data hold time after clock rises 15 - ns --- tON, tOFF Time from latch enable to HVOUT - 500 ns CL = 15pF tDHL Delay time clock to data high to low - 70 ns CL = 15pF tDLH Delay time clock to data low to high - 70 ns CL = 15pF tDLE* Delay time clock to LE low to high 25 - ns --- tWLE LE pulse width 25 - ns --- tSLE LE set-up time before clock rises 0 - ns --- fCLK tWL, tWH Parameter = 85°C max. Logic signal inputs and Data inputs have tr, tf ≤ 5ns [10% and 90% points]) Clock frequency * tDLE is not required but is recommended to produce stable HV outputs and thus minimize power dissipation and current spikes (allows internal SR output to stabilize). Doc.# DSFP-HV57708 A061913 3 Supertex inc. www.supertex.com HV57708 Input and Output Equivalent Circuits VDD VDD VPP DATA OUT DATA INPUT GND GND Logic Inputs HVOUT GND Logic Data Output High Voltage Outputs Switching Waveforms VIH DATA INPUT 50% Data Valid 50% CLK 50% tf tH tSU 90% 50% 50% tWL tr 10% 10% tWH VOH 50% VOL tDHL tWLE HVOUT w/ S/R LOW tSLE 90% 10% tOFF HVOUT w/ S/R HIGH VIH 50% 50% tDLE 10% VIL VOL tDLH LE VIH VOH 50% DATA OUT 90% 50% VIL 90% VOL VOH VOL VOH VOL tON Doc.# DSFP-HV57708 A061913 4 Supertex inc. www.supertex.com HV57708 Function Table Inputs Function Outputs Data CLK LE BL POL DIR Shift Reg HV Outputs Data Out All O/P high X X X L L X - H - All O/P low X X X L H X - L - O/P normal X X X H H X - No inversion - O/P inverted X X H L X - Inversion - H H H X L L - H H H X H H - H H L X L H - H X _ _↑ _ _↑ _ _↑ _ _↑ H H L X H L - X X L H H X * Stored Data - X X _ _↑ _ _↑ _ _↑ _ _↑ L H L X * Inversion of stored data - H H H H Qn→Qn+1 New H or L DI/O1-4B L H H H Qn→Qn+1 Previous H or L DI/O1-4B L H H L Qn→Qn-1 Previous H or L DI/O1-4A H H H L Qn→Qn-1 New H or L DI/O1-4A Data falls through (latches transparent) Data stored/ latches loaded L H L DI/O1-4A I/O relation DI/O1-4A DI/O1-4B DI/O1-4B Note: * = dependent on previous stage’s state. See Pin configuration for DIN and DOUT pin designation for CW and CCW shift. Shift Register Operation HVOUT32 • DIR = H; CW (HVOUT1 → HVOUT64) DIR = L; CCW (HVOUT64 → HVOUT1) DIR = H • DIR = L • • 1 SR1 4 • HVOUT33 • 2 SR1 3 • • 3 SR1 2 • • 4 SR1 1 HVOUT2 HVOUT63 HVOUT64 HVOUT1 Pin Doc.# DSFP-HV57708 A061913 25 26 27 28 36 37 38 39 5 Supertex inc. www.supertex.com HV57708 Pin Function Pin # Function Pin # Function Pin # Function Pin # Function 1 HVOUT24/41 21 HVOUT4/61 41 HVOUT64/1 61 HVOUT44/21 2 HVOUT23/42 22 HVOUT3/62 42 HVOUT63/2 62 HVOUT43/22 3 HVOUT22/43 23 HVOUT2/63 43 HVOUT62/3 63 HVOUT42/23 4 HVOUT21/44 24 HVOUT1/64 44 HVOUT61/4 64 HVOUT41/24 5 HVOUT20/45 25 DIN1/DOUT4(A) 45 HVOUT60/5 65 HVOUT40/25 6 HVOUT19/46 26 DIN2/DOUT3(A) 46 HVOUT59/6 66 HVOUT39/26 7 HVOUT18/47 27 DIN3/DOUT2(A) 47 HVOUT58/7 67 HVOUT38/27 8 HVOUT17/48 28 DIN4/DOUT1(A) 48 HVOUT57/8 68 HVOUT37/28 9 HVOUT16/49 29 LE 49 HVOUT56/9 69 HVOUT36/29 10 HVOUT15/50 30 CLK 50 HVOUT55/10 70 HVOUT35/30 11 HVOUT14/51 31 BL 51 HVOUT54/11 71 HVOUT34/31 12 HVOUT13/52 32 VDD 52 HVOUT53/12 72 HVOUT33/32 13 HVOUT12/53 33 DIR 53 HVOUT52/13 73 HVOUT32/33 14 HVOUT11/54 34 GND 54 HVOUT51/14 74 HVOUT31/34 15 HVOUT10/55 35 POL 55 HVOUT50/15 75 HVOUT30/35 16 HVOUT9/56 36 DOUT4/DIN1(B) 56 HVOUT49/16 76 HVOUT29/36 17 HVOUT8/57 37 DOUT3/DIN2(B) 57 HVOUT48/17 77 HVOUT28/37 18 HVOUT7/58 38 DOUT2/DIN3(B) 58 HVOUT47/18 78 HVOUT27/38 19 HVOUT6/59 39 DOUT1/DIN4(B) 59 HVOUT46/19 79 HVOUT26/39 20 HVOUT5/60 40 VPP 60 HVOUT45/20 80 HVOUT25/40 Note: Pin designation for DIR = H/L. Example: For DIR = H, pin 41 is HVOUT64. For DIR = L, pin 41 is HVOUT1. For CW/CCW Shift see function table QN → QN+1. Doc.# DSFP-HV57708 A061913 6 Supertex inc. www.supertex.com HV57708 80-Lead PQFP Package Outline (PG) 20.00x14.00mm body, 3.40mm height (max), 0.80mm pitch, 3.90mm footprint D D1 E1 E Note 1 (Index Area D1/4 x E1/4) 80 1 e b Top View θ1 View B A A2 Seating Plane A1 L L1 Side View L2 Gauge Plane θ Seating Plane View B Note: 1. A Pin 1 identifier must be located in the index area indicated. The Pin 1 identifier can be: a molded mark/identifier; an embedded metal marker; or a printed indicator. Symbol Dimension (mm) A A1 MIN 2.80* 0.25 NOM - - MAX 3.40 A2 b D D1 E E1 2.55 0.30 23.65* 19.80* 17.65* 13.80* 2.80 - 23.90 20.00 17.90 14.00 0.50* 3.05 0.45 24.15* 20.20* 18.15* 14.20* e 0.80 BSC L 0.73 0.88 1.03 L1 1.95 REF L2 0.25 BSC θ θ1 0 5O O 3.5O - 7 16O O JEDEC Registration MO-112, Variation CB-1, Issue B, Sept.1995. * This dimension is not specified in the JEDEC drawing. Drawings not to scale. Supertex Doc. #: DSPD-80PQFPPG, Version C041309. (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to http://www.supertex.com/packaging.html.) Supertex inc. does not recommend the use of its products in life support applications, and will not knowingly sell them for use in such applications unless it receives an adequate “product liability indemnification insurance agreement.” Supertex inc. does not assume responsibility for use of devices described, and limits its liability to the replacement of the devices determined defective due to workmanship. No responsibility is assumed for possible omissions and inaccuracies. Circuitry and specifications are subject to change without notice. For the latest product specifications refer to the Supertex inc. (website: http//www.supertex.com) Supertex inc. ©2013 Supertex inc. All rights reserved. Unauthorized use or reproduction is prohibited. Doc.# DSFP-HV57708 A061913 7 1235 Bordeaux Drive, Sunnyvale, CA 94089 Tel: 408-222-8888 www.supertex.com