2830 S. Fairview St. Santa Ana, CA 92704 PH: (714) 979-8220 FAX: (714) 966-5256 MM054 Features • High current capability, easy to parallel to further boost up performance • Compact and rugged construction offering weight and space savings • Available with PC board solderable pins (see mechanical outline below) or threaded terminals (add “T”suffix to part number, see option below) • HPM (Hermetic Power Module) • Isolation voltage capability (in reference to the base) in excess of 3kV • Very low thermal resistance • Thermally matched construction provides excellent temperature and power cycling capability • Additional voltage ratings or terminations available upon request • MIL-PRF-19500 screening available upon request DISCHARGE: 100 A CHARGE: 20 A BATTERY BYPASS CIRCUIT Maximum Ratings per leg @ 25°C (unless otherwise specified) PART NUMBER SYMBOL MAX. UNIT 100 20 500 200 -55 to +175 Amps Amps Amps Amps °C Thermal resistance, junction to base, discharge ID IC IDSM ICSM Tj Tstg RΘ jbD °C/W Thermal resistance, junction to base , charge RΘ jbC 0.7 (typ. 0.5) 0.9 (typ. 0.75) Discharge Current Charge Current Non-Repetitive Peak Surge Current (discharge) Non-Repetitive Peak Surge Current (charge) Operating and Storage Junction Temperature Range °C/W Mechanical Outline Datasheet# MSC0322A MM054 Electrical Parameters, DISCHARGE circuit @ 25°C (unless otherwise specified) DESCRIPTION Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 SYMBOL VD1 VD2 VD3 VD4 VD5 VD6 VD7 CONDITIONS IF= 10 A, IF= 20 A, IF= 40 A, IF= 80 A, IF= 100 A, IF= 20 A, TA= -55°C IF= 20 A, TA= 125°C MIN TYP. 350 400 490 530 750 490 320 MAX 340 470 600 800 590 - UNIT mV mV mV mV mV mV mV note: see 1N6790 data sheet for full electrical characteristics of the discharge schottky diode Electrical Parameters, CHARGE circuit @ 25°C (unless otherwise specified) DESCRIPTION Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 Forward Voltage, note 1 Notes (1) Pulse test, t ≤ 300 µs, duty cycle δ≤ 2% SYMBOL VC1 VC2 VC3 VC4 VC5 VC4 CONDITIONS IF= 50 mA IF= 100 mA IF= 5 A, IF= 10 A, IF= 20 A, IF= 10 A, TA= 125°C MIN TYP. MAX UNIT 2 - 2.1 2.2 2.6 2.7 2.85 2.35 2.7 3.0 3.3 2.7 V V V V V V