1N457A thru 1N459A Qualified Level: JAN Switching Diode Available on commercial versions Qualified per MIL-PRF-19500/193 DESCRIPTION These popular 1N457 – 1N459 series of JEDEC registered switching/signal diodes are metallurgically bonded. These small low capacitance diodes with very fast switching speeds are hermetically sealed and bonded into a double-plug DO-35 package. They may be used in a variety of fast switching applications. Microsemi also offers a variety of other switching/signal diodes. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES DO-35 Package • • • • • • JEDEC registered 1N457A thru 1N459A series. Tightened V F of 1 V max at 100 mA. Metallurgically bonded. Hermetically sealed. Double plug construction. JAN qualification per MIL-PRF-19500/193 available. • RoHS compliant versions available (commercial grade only). APPLICATIONS / BENEFITS • • Small size for high density mounting using flexible thru-hole leads (see package illustration). High frequency data lines: • RS-232 & RS–422 interface networks • Ethernet 10 Base T links • Switching core drivers • Local area networks • Computers MAXIMUM RATINGS @ 25 oC unless stated otherwise. Parameters/Test Conditions Junction Temperature Storage Temperature Maximum Reverse Voltage 1N457A 1N458A 1N459A Working Peak Reverse Voltage 1N457A 1N458A 1N459A o (1) Maximum Average dc Output Current @ TA = +25 C Forward Current 1N457A 1N458A 1N459A Steady-State Power Dissipation Notes: Symbol Value TJ TSTG V RM -65 to +150 -65 to +175 70 150 200 60 125 175 150 225 165 120 500 V RWM IO IF PD 1. Derate I O linearly to 0.0 mA at +150 °C. T4-LDS-0023, Rev. 1 (112020) Unit o C C V o V mA mA mW MSC – Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 (978) 620-2600 Fax: (978) 689-0803 MSC – Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 Website: www.microsemi.com ©2011 Microsemi Corporation Page 1 of 3 1N457A thru 1N459A MECHANICAL and PACKAGING • • • • • • • CASE: Hermetically sealed glass package. TERMINALS: Tin/Lead or RoHS compliant matte/tin (commercial grade only) plated copper clad steel. MARKING: Blue body coat with black digits. POLARITY: Cathode end is banded. TAPE & REEL option: Standard per EIA-296. Consult factory for quantities. WEIGHT: 0.2 grams. See Package Dimensions on last page. PART NOMENCLATURE JAN 1N457 A (e3) Reliability Level JAN = JAN Level Blank = Commercial RoHS Compliance e3 = RoHS Compliant (available on commercial grade only) Blank = non-RoHS Compliant JEDEC type number (see Electrical Characteristics table) SYMBOLS & DEFINITIONS Definition Symbol IF IO IR VF V RWM V WM Commercial Grade (omitted in JAN level part number) Forward Current. Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range excluding all transient voltages (ref JESD282-B). Also sometimes known as PIV. Working Peak Voltage: The maximum peak voltage that can be applied over the operating temperature range. This is also referred to as Standoff Voltage. T4-LDS-0023, Rev. 1 (112020) ©2011 Microsemi Corporation Page 2 of 3 1N457A thru 1N459A ELECTRICAL CHARACTERISTICS @ 25 oC unless stated otherwise. Forward Voltage Part Number 1N457 1N458 1N459 V F1 @ I F V 1.0 1.0 1.0 (Note 1) Reverse Current I R1 @ V RWM o T A = +25 C nA 25 25 25 I R2 @ V RM o T A = +25 C µA 1 1 1 I R3 @ V RWM o T A = +150 C µA 5 5 5 Low Temp Operating Forward Voltage V F2 @ I F = 100 mA pulsed o T A = -55 C V 1.2 1.2 1.2 NOTES: 1. I F = 100 mA, t p = 8.5 ms, max duty cycle 2 percent (pulsed). PACKAGE DIMENSIONS NOTES: 1. Dimensions are in inches. 2. Millimeters are given for general information only. 3. In accordance with ASME Y14.5M, diameters are equivalent to Φx symbology. T4-LDS-0023, Rev. 1 (112020) ©2011 Microsemi Corporation Ltr BD BL LD LL Dimensions Inches Millimeters Min Max Min Max .056 .075 1.42 1.90 .140 .180 3.56 4.57 .018 .022 0.46 0.56 1.000 1.500 25.40 38.10 Page 3 of 3