Revised January 2004 MM74C73 Dual J-K Flip-Flops with Clear and Preset General Description Features The MM74C73 dual J-K flip-flops are monolithic complementary MOS (CMOS) integrated circuits constructed with N- and P-channel enhancement transistors. Each flip-flop has independent J, K, clock and clear inputs and Q and Q outputs. This flip-flop is edge sensitive to the clock input and change state on the negative going transition of the clock pulse. Clear or preset is independent of the clock and is accomplished by a low level on the respective input. ■ Supply voltage range: 3V to 15V ■ Tenth power TTL compatible: Drive 2 LPTTL loads ■ High noise immunity: 0.45 VCC (typ.) ■ Low power: 50 nW (typ.) ■ Medium speed operation: 10 MHz (typ.) Applications • Automotive • Data terminals • Instrumentation • Medical electronics • Alarm systems • Industrial electronics • Remote metering • Computers Ordering Code: Order Number MM74C73N Package Number N14A Package Description 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Connection Diagram Truth Table tn tn+1 J K Q 0 0 Qn 0 1 0 1 0 1 1 1 Qn Preset Clear Qn Qn 0 0 0 0 0 1 1 0 1 0 0 1 1 1 Qn Qn (Note 1) (Note 1) tn = bit time before clock pulse tn+1 = bit time after clock pulse Note: A logic “0” on clear sets Q to logic “0”. Top View Note 1: No change in output from previous state © 2004 Fairchild Semiconductor Corporation DS005884 www.fairchildsemi.com MM74C73 Dual J-K Flip-Flops with Clear and Preset October 1987 MM74C73 Logic Diagrams Transmission Gate www.fairchildsemi.com 2 MM74C73 Absolute Maximum Ratings(Note 2) Voltage at Any Pin −0.3V to VCC + 0.3V Operating Temperature Range −55°C to +125°C Storage Temperature −65°C to +150°C Power Dissipation Dual-In-Line 700 mW Small Outline 500 mW Note 2: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they are not meant to imply that the devices should be operated at these limits. The table of Electrical Characteristics provides conditions for actual device operation. Lead Temperature 260°C (Soldering, 10 seconds) +3V to 15V Operating VCC Range VCC (Max) 18V DC Electrical Characteristics Min/Max limits apply across temperature range unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CMOS TO CMOS VIN(1) VIN(0) VOUT(1) VOUT(0) Logical “1” Input Voltage Logical “0” Input Voltage Logical “1” Output Voltage Logical “0” Output Voltage VCC = 5V 3.5 VCC = 10V 8 V VCC = 5V 1.5 VCC = 10V 2 VCC = 5V 4.5 VCC = 10V 9 V VCC = 5V 0.5 VCC = 10V 1 IIN(1) Logical “1” Input Current VCC = 15V IIN(0) Logical “0” Input Current VCC = 15V ICC Supply Current VCC = 15V V 1 −1 V µA µA 0.050 60 µA 0.8 V LOW POWER TTL TO CMOS INTERFACE VIN(1) Logical “1” Input Voltage VCC = 4.75V VIN(0) Logical “0” Input Voltage VCC = 4.75V VCC − 1.5 VOUT(1) Logical “1” Output Voltage VCC = 4.75V, IO = −360 µA VOUT(0) Logical “0” Output Voltage VCC = 4.75V, IO = 360 µA V 2.4 V 0.4 V OUTPUT DRIVE (See Family Characteristics Data Sheet) (Short Circuit Current) ISOURCE Output Source Current VCC = 5V, VIN(0) = 0V ISOURCE Output Source Current VCC = 10V, VIN(0) = 0V ISINK Output Sink Current ISINK Output Sink Current TA = 25°C, VOUT = 0V TA = 25°C, VOUT = 0V VCC = 5V, VIN(1) = 5V TA = 25°C, VOUT = V CC VCC = 10V, VIN(1) = 10V TA = 25°C, VOUT = V CC 3 −1.75 mA −8 mA 1.75 mA 8 mA www.fairchildsemi.com MM74C73 AC Electrical Characteristics (Note 3) TA = 25°C, CL = 50 pF, unless otherwise noted Symbol Parameter Conditions Min Typ Max CIN Input Capacitance Any Input 5 tpd0, tpd1 Propagation Delay Time to a VCC = 5V 180 300 Logical “0” or Logical “1” from VCC = 10V 70 110 Propagation Delay Time to a VCC = 5V 200 300 Logical “0” from Preset or Clear VCC = 10V 80 130 Propagation Delay Time to a VCC = 5V 200 300 Logical “1” from Preset or Clear VCC = 10V 80 130 Time Prior to Clock Pulse that VCC = 5V 110 175 Data must be Present VCC = 10V 45 70 Time after Clock Pulse that J VCC = 5V −40 0 and K must be Held VCC = 10V −20 0 Minimum Clock Pulse Width VCC = 5V 120 190 tWL = tWH VCC = 10V 50 80 Units pF ns Clock to Q or Q tpd0 tpd tS tH tPW tPW tMAX tr, tf Minimum Preset and Clear VCC = 5V 90 130 Pulse Width VCC = 10V 40 60 Maximum Toggle Frequency VCC = 5V 2.5 4 VCC = 10V 7 11 Clock Pulse Rise and Fall Time www.fairchildsemi.com 15 VCC = 10V 5 4 ns ns ns ns ns MHz VCC = 5V Note 3: AC Parameters are guaranteed by DC correlated testing. ns µs Switching Time Waveforms CMOS to CMOS tr = tf = 20 ns Typical Applications Ripple Binary Counters Shift Registers 74C Compatibility Guaranteed Noise Margin as a Function of VCC 5 www.fairchildsemi.com MM74C73 AC Test Circuit MM74C73 Dual J-K Flip-Flops with Clear and Preset Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com www.fairchildsemi.com 6