This product complies with the RoHS Directive (EU 2002/95/EC). DMA20402 Silicon PNP epitaxial planar type For general amplification Features Package High forward current transfer ratio hFE with excellent linearity Contributes to miniaturization of sets, reduction of component count. Eco-friendly Halogen-free package Dual DSA2002 (Individual) Code Mini6-G4-B Pin Name 1: Emitter (Tr1) 2: Base (Tr1) 3: Collector (Tr2) Packaging Marking Symbol: B5 Basic Part Number Embossed type (Thermo-compression sealing): 3000 pcs / reel (standard) Internal Connection Absolute Maximum Ratings Ta = 25°C Parameter 4: Emitter (Tr2) 5: Base (Tr2) 6: Collector (Tr1) Symbol Rating Unit Collector-base voltage (Emitter open) VCBO –60 V Collector-emitter voltage (Base open) VCEO –50 V Emitter-base voltage (Collector open) VEBO –5 V Collector current IC –500 mA Peak collector current ICP –1 A Total power dissipation PT 300 mW Junction temperature Tj 150 °C Storage temperature Tstg –55 to +150 °C (C1) 6 (B2) 5 (E2) 4 Tr1 Tr2 1 (E1) 2 (B1) 3 (C2) Electrical Characteristics Ta = 25°C±3°C Parameter Symbol Conditions Min Typ Max Unit Collector-base voltage (Emitter open) VCBO IC = –10 µA, IE = 0 –60 V Collector-emitter voltage (Base open) VCEO IC = –2 mA, IB = 0 –50 V Emitter-base voltage (Collector open) VEBO IE = –10 µA, IC = 0 –5 V Collector-base cutoff current (Emitter open) ICBO VCB = –20 V, IE = 0 hFE1 VCE = –10 V, IC = –150 mA 120 hFE2 VCE = –10 V, IC = –500 mA 40 Collector-emitter saturation voltage * VCE(sat) IC = –300 mA, IB = –30 mA – 0.2 – 0.6 V Base-emitter saturation voltage * VBE(sat) IC = –300 mA, IB = –30 mA – 0.9 –1.5 V fT VCE = –10 V, IC = –50 mA 130 VCB = –10 V, IE = 0, f = 1 MHz 7.3 Forward current transfer ratio * Transition frequency Collector output capacitance (Common base, input open circuited) Cob – 0.1 340 µA MHz 15 pF Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Pulse measurement Publication date: April 2010 ZJJ00534CED 1 This product complies with the RoHS Directive (EU 2002/95/EC). DMA20402 DMA20402_PT-Ta DMA20402_IC-VCE PT Ta IC VCE DMA20402_hFE-IC hFE IC −120 400 300 VCE = −10 V 300 200 100 −80 −400 µA −60 −300 µA −40 −200 µA −100 µA −20 0 40 80 120 160 0 200 Ambient temperature Ta (°C) 0 −2 −4 −6 DMA20402_IC-VBE VCE(sat) IC IC VBE 600 IC / IB = 10 Collector current IC (mA) −1 Ta = 85°C −30°C −102 −103 25°C Ta = 85°C 400 −30°C 300 200 0 0 0.2 0.4 0.6 DMA20402_fT-IC fT IC Transition frequency fT (MHz) 200 VCE = −10 V Ta = 25°C 120 80 40 0 0.1 1 10 100 Collector current IC (mA) 2 −30°C 100 50 0 −1 ZJJ00534CED −10 −102 −103 Collector current IC (mA) Cob VCB 0.8 1.0 Base-emitter voltage VBE (V) Collector current IC (mA) 160 25°C 150 DMA20402_Cob-VCB 100 25°C −10 200 −12 VCE = 10 V 500 − 0.01 −1 −10 Ta = 85°C Collector-emitter voltage VCE (V) DMA20402_VCEsat-IC −10 − 0.1 −8 250 1.2 Collector output capacitance (Common base, input open circuited) Cob (pF) 0 Collector-emitter saturation voltage VCE(sat) (V) IB = −500 µA Forward current transfer ratio hFE Collector current IC (mA) Total power dissipation PT (mW) Ta = 25°C −100 25 IE = 0 f =1 MHz Ta = 25°C 20 15 10 5 0 1 10 100 Collector-base voltage VCB (V) This product complies with the RoHS Directive (EU 2002/95/EC). DMA20402 Mini6-G4-B Unit: mm +0.20 2.90 −0.05 +0.10 0.50 −0.05 +0.05 0.13 −0.02 +0.10 0.30 −0.05 1 2 3 (0.95) (0.95) 1.9 ±0.1 0.4 ±0.2 (0.65) 6° 1.50 −0.05 +0.2 4 2.8 −0.3 5 +0.25 6 +0.3 1.1 −0.1 0 to 0.1 1.1 −0.1 +0.2 8° ZJJ00534CED 3 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for general applications (such as office equipment, communications equipment, measuring instruments and household appliances), or for specific applications as expressly stated in this book. Consult our sales staff in advance for information on the following applications: – Special applications (such as for airplanes, aerospace, automotive equipment, traffic signaling equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. It is to be understood that our company shall not be held responsible for any damage incurred as a result of or in connection with your using the products described in this book for any special application, unless our company agrees to your using the products in this book for any special application. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20100202