This product complies with the RoHS Directive (EU 2002/95/EC). DMA2610H Silicon PNP epitaxial planar type For digital circuits Features Package Basic Part Number Code Mini5-G3-B Pin Name 1: Base (Tr1) 2: Emitter (Common) 3: Base (Tr2) Contributes to miniaturization of sets, reduction of component count. Eco-friendly Halogen-free package Dual DRA2123Y (Common emitter) Packaging 4: Collector (Tr2) 5: Collector (Tr1) Embossed type (Thermo-compression sealing): 3000 pcs / reel (standard) Marking Symbol: R4 Absolute Maximum Ratings Ta = 25°C Internal Connection Parameter Symbol Rating Unit Collector-base voltage (Emitter open) VCBO –50 V Collector-emitter voltage (Base open) VCEO –50 V Collector current IC –100 mA Total power dissipation PT 300 mW Junction temperature Tj 150 °C Storage temperature Tstg –55 to +150 °C (C1) 5 (C2) 4 Tr2 Tr1 R2 R2 R1 R1 1 (B1) 2 (E) Resistance value 3 (B2) R1 R2 2.2 10 kΩ kΩ Electrical Characteristics Ta = 25°C±3°C Parameter Symbol Conditions Min Typ Max Unit Collector-base voltage (Emitter open) VCBO IC = –10 µA, IE = 0 –50 V Collector-emitter voltage (Base open) VCEO IC = –2 mA, IB = 0 –50 V Collector-base cutoff current (Emitter open) ICBO VCB = –50 V, IE = 0 – 0.1 µA Collector-emitter cutoff current (Base open) ICEO VCE = –50 V, IB = 0 – 0.5 µA Emitter-base cutoff current (Collector open) IEBO VEB = –6 V, IC = 0 –1.0 mA Forward current transfer ratio hFE VCE = –10 V, IC = –5 mA 30 hFE (Small/Large) VCE = –10 V, IC = –5 mA 0.50 hFE ratio * Collector-emitter saturation voltage VCE(sat) IC = –10 mA, IB = – 0.5 mA Input voltage (ON) VI(on) VCE = – 0.2 V, IC = –5 mA Input voltage (OFF) VI(off) VCE = –5 V, IC = –100 µA 0.99 – 0.25 –1.1 V V – 0.5 V Input resistance R1 –30% 2.2 +30% kΩ Resistance ratio R1 / R2 0.17 0.22 0.27 Note) 1. Measuring methods are based on JAPANESE INDUSTRIAL STANDARD JIS C 7030 measuring methods for transistors. 2. *: Ratio between 2 elements Publication date: January 2010 ZJJ00544BED 1 This product complies with the RoHS Directive (EU 2002/95/EC). DMA2610H DMA2610H_PT-Ta DMA2610H_IC-VCE PT Ta IC VCE IB = −700 µA −100 250 200 150 100 −600 µA −80 −500 µA −60 −400 µA −300 µA −40 −200 µA −20 50 0 40 80 120 160 0 200 −100 µA 0 −2 −4 −8 −10 250 150 25°C −30°C 100 50 0 − 0.1 −12 Ta = 85°C 200 −1 IC / IB = 20 −100 DMA2610H_VIN-IO IO VIN −10 −10 Collector current IC (mA) DMA2610H_IO-VIN VCE(sat) IC VIN IO −100 VO = −5 V VO = − 0.2 V Ta = 85°C 25°C −10−1 Ta = 85°C − 0.1 − 0.01 − 0.1 −1 −30°C Input voltage VIN (V) −1 Output current IO (mA) Collector-emitter saturation voltage VCE(sat) (V) −6 VCE = −10 V Collector-emitter voltage VCE (V) DMA2610H_VCEsat-IC −10 Forward current transfer ratio hFE 300 Collector current IC (mA) Total power dissipation PT (mW) 300 Ta = 25°C Ambient temperature Ta (°C) −30°C −10−2 −10 25°C Ta = −30°C −1 85°C 25°C −1 −10 Collector current IC (mA) 2 hFE IC −120 350 0 DMA2610H_hFE-IC −100 −10−3 0 − 0.5 −1.0 −1.5 Input voltage VIN (V) ZJJ00544BED −2.0 − 0.1 − 0.1 −1 −10 Output current IO (mA) −100 This product complies with the RoHS Directive (EU 2002/95/EC). DMA2610H Mini5-G3-B (0.65) 0.30 Unit: mm +0.10 −0.05 0.13 +0.05 −0.02 1 2 (0.95) (0.95) 2.8 0.4 ±0.2 +0.2 −0.3 6° +0.25 −0.05 1.50 4 5 3 1.9 ±0.1 2.90 +0.20 −0.05 +0.3 1.1 −0.1 0 to 0.1 +0.2 1.1 −0.1 8° ZJJ00544BED 3 Request for your special attention and precautions in using the technical information and semiconductors described in this book (1) If any of the products or technical information described in this book is to be exported or provided to non-residents, the laws and regulations of the exporting country, especially, those with regard to security export control, must be observed. (2) The technical information described in this book is intended only to show the main characteristics and application circuit examples of the products. No license is granted in and to any intellectual property right or other right owned by Panasonic Corporation or any other company. Therefore, no responsibility is assumed by our company as to the infringement upon any such right owned by any other company which may arise as a result of the use of technical information described in this book. (3) The products described in this book are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: – Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. – Any applications other than the standard applications intended. (4) The products and product specifications described in this book are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the range of absolute maximum rating and the guaranteed operating conditions (operating power supply voltage and operating environment etc.). Especially, please be careful not to exceed the range of absolute maximum rating on the transient state, such as power-on, power-off and mode-switching. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (6) Comply with the instructions for use in order to prevent breakdown and characteristics change due to external factors (ESD, EOS, thermal stress and mechanical stress) at the time of handling, mounting or at customer's process. When using products for which damp-proof packing is required, satisfy the conditions, such as shelf life and the elapsed time since first opening the packages. (7) This book may be not reprinted or reproduced whether wholly or partially, without the prior written permission of our company. 20080805