MBR40250 Product Preview 250 V, 40 A SWITCHMODE Schottky Power Rectifier Features • • • • • http://onsemi.com 250 V Blocking Voltage Low Forward Voltage Drop, VF = 0.8 V Soft Recovery Characteristic, TRR < 35 ns Low Reverse Current, IR = 50 A Stable at Temperature SCHOTTKY RECTIFIER 40 AMPERES 250 VOLTS Benefits • • • • Eliminates Reverse Recovery Oscillations Minimizes Need for EMI Filtering Reduces Switching Losses Improved Efficiency MARKING DIAGRAMS 4 TO−220AB CASE 221A PLASTIC Applications • • • • Power Supply Power Management Automotive Instrumentation 3 YY WW TBD 1, 4 1 3 4 Mechanical Characteristics • Case: Epoxy, Molded • Weight: 1.9 grams (approximately) • Finish: All External Surfaces Corrosion Resistant and Terminal TO−220AC CASE 221B T SUFFIX PLASTIC YY WW TBD 1 Leads are Readily Solderable • Lead Temperature for Soldering Purposes: 4 3 260°C Max. for 10 Seconds 1 • Epoxy Meets UL 94 V−0 at 0.125 in 2 3 TBD YY WW = Device Code = Year = Work Week ORDERING INFORMATION Device Package Shipping MBR40250 TO−220AB 50 Units/Rail MBR40250T TO−220AC 50 Units/Rail This document contains information on a product under development. ON Semiconductor reserves the right to change or discontinue this product without notice. Semiconductor Components Industries, LLC, 2004 November, 2004 − Rev. P0 1 Publication Order Number: MBRD1035CTL/D MBR40250 MAXIMUM RATINGS Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage Rating VRRM VRWM VR 250 V Average Rectified Forward Current (Rated VR) TC = 125°C IF(AV) 45 A Peak Repetitive Forward Current (Rated VR, Square Wave, 20 kHz TC = 90°C) IFRM 80 A Storage Temperature Tstg 65 to +175 °C Operating Junction Temperature TJ 65 to +150 °C dv/dt 10,000 V/s Voltage Rate of Change (Rated VR) Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Rating Symbol Value RJC RJA 2.0 60 Unit °C/W Maximum Thermal Resistance Junction−to−Case Junction−to−Ambient ELECTRICAL CHARACTERISTICS Rating Symbol Maximum Instantaneous Forward Voltage (Note 1) Value VF IF = 40 A, TC = 25°C IF = 40 A, TC = 150°C Maximum Instantaneous Reverse Current (Note 1) Unit V 1.0 0.9 IR Rated DC Voltage, TC = 25°C Rated DC Voltage, TC = 150°C mA 1.0 50 DYNAMIC CHARACTERISTICS Capacitance VF = −5.0 V, TC = 25°C, Frequency = 1.0 MHz 1. Pulse Test: Pulse Width = 300 s, Duty Cycle ≤ 2.0%. http://onsemi.com 2 CT 500 pF MBR40250 100 IR, REVERSE CURRENT (A) 1.0E-01 TJ = 150°C 10 TJ = 125°C TJ = 100°C TJ = 25°C 1 0.2 0.4 0.6 0.8 TJ = 125°C 1.0E-03 TJ = 100°C 1.0E-04 1.0E-05 1.0E-06 1.0E-07 25 1.0 TJ = 150°C 1.0E-02 TJ = 25°C 50 VF, INSTANTANEOUS FORWARD VOLTAGE (V) 75 100 125 175 200 Figure 2. Typical Reverse Current 700 TJ = 25°C 600 500 400 300 200 100 0 150 VR, REVERSE VOLTAGE (V) Figure 1. Typical Forward Voltage C, CAPACITANCE (pF) IF, INSTANTANEOUS FORWARD CURRENT (A) TYPICAL CHARACTERISTICS 1 10 VR, REVERSE VOLTAGE (V) Figure 3. Typical Capacitance http://onsemi.com 3 100 225 250 MBR40250 PACKAGE DIMENSIONS TO−220AC CASE 221B−04 ISSUE D NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. C B Q F S T DIM A B C D F G H J K L Q R S T U 4 A 1 U 3 H K L R D G J http://onsemi.com 4 INCHES MIN MAX 0.595 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.190 0.210 0.110 0.130 0.018 0.025 0.500 0.562 0.045 0.060 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 MILLIMETERS MIN MAX 15.11 15.75 9.65 10.29 4.06 4.82 0.64 0.89 3.61 3.73 4.83 5.33 2.79 3.30 0.46 0.64 12.70 14.27 1.14 1.52 2.54 3.04 2.04 2.79 1.14 1.39 5.97 6.48 0.000 1.27 MBR40250 PACKAGE DIMENSIONS TO−220AB CASE 221A−09 ISSUE AA −T− B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N http://onsemi.com 5 INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 −−− −−− 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 −−− −−− 2.04 MBR40250 SWITCHMODE is a trademark of Semiconductor Components Industries, LLC (SCILLC). ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Phone: 81−3−5773−3850 http://onsemi.com 6 For additional information, please contact your local Sales Representative. MBR40250/D